Wizard EVOLVED

[Ape]

I finally came back today, and got it...
That thing is truely gorgeous: High power, very beautifull, very light.

In My opinion, this is the number one ecig of the whole market right now.
I think its the begining of a fourth generation ecig (510, eGo, first mods, and now this, wich is one step ahead)

My only concern is about the strength of the switch.
It's so light, I hope it will be able to hold all this power passing through...

I'm using pyrex vivi nova from smoktech on it (with pyrex drip tip) and it works very Well at 20 watts.
Dry burn effects are not happening so much, its very nice.
The air flow is a bit tight, though.

Can't wait for the atty, it's going to be a must have for all of us.
I believe you'll use pyrex tank as Well ?

(in my opinion you should keep High standards, and not bother making a SS version )

 

[andrebandre]

I've got mine waiting at home <3
Now I've got to find a RBA wich will go Well with it.

Beside the Hydra v2, and the bliss v2 (and the wand coming in months), does any one know one with:
- Titanium finnish
- 21mm diameter
- Genesis mode
?

(if soemone is selling, I might be buying )

In my opinion nothing can come close to the Wand on a Wizard mod.
Even with a custom blasted finish neither the Hydra nor the Bliss are a good match.
The only 21mm OD atty that i know of is the A of E Prometey but it looks somewhat unsophisticated compared to the mod.
The Titanide tanks are 20mm and decent fit, but the Wand or some other MB atty is what you want for your WE.
I've had a hard time restraining myself from purchasing the 18500 version but that blue screen kept me from going ahead.
It just isn't the right color for me. Too cold for my eye. And if i may say so, cheap.
I hope there will be more WE batches released and also that Evolve will offer other colors for display.

 

[Ape]

Well noted, I'm waiting for My Verified member status to search for one in the Buy&sell section.
I like the Blue/green display of the DNA20, but I must notify that there's a slight degradation of the color of the middle cap, on the bottom.
It occures after 24 Hours of use at 15W (mostly).

It seems to be an electrolyse effect: the satin aspect disappeared slightly, forming a small ring with brushed aspect.
Its seems to be around the minus of the battery.

That's not so visible, and it still beautifull, light and powerfull.
But this could have been corrected before "mass" production.
By using a brushed finished maybe...

 

[Gangster]

Wizard EVOLVED very beautiful and high quality MOD. Really want to afford such a purchase). How can this be done? It's my birthday in late October, I want to buy myself a gift.

 

[Chowderhead1972]

You are two weeks and $535us short... Stainless version coming next.

 

[mark78]

I finally came back today, and got it...
That thing is truely gorgeous: High power, very beautifull, very light.

In My opinion, this is the number one Ecig of the whole market right now.
I think its the begining of a fourth generation ecig (510, eGo, first mods, and now this, wich is one step ahead)

My only concern is about the strength of the switch.
It's so light, I hope it will be able to hold all this power passing through...

I'm using pyrex vivi nova from smoktech on it (with pyrex drip tip) and it works very Well at 20 watts.
Dry burn effects are not happening so much, its very nice.
The air flow is a bit tight, though.

Can't wait for the atty, it's going to be a must have for all of us.
I believe you'll use pyrex tank as Well ?

(in my opinion you should keep High standards, and not bother making a SS version )

The SS will be at the same level as the WE, just some design changes.
And the atty ( when it will be done will habe the best raw materials we know)

 

[mark78]

Well noted, I'm waiting for My Verified member status to search for one in the Buy&sell section.
I like the Blue/green display of the DNA20, but I must notify that there's a slight degradation of the color of the middle cap, on the bottom.
It occures after 24 Hours of use at 15W (mostly).

It seems to be an electrolyse effect: the satin aspect disappeared slightly, forming a small ring with brushed aspect.
Its seems to be around the minus of the battery.

That's not so visible, and it still beautifull, light and powerfull.
But this could have been corrected before "mass" production.
By using a brushed finished maybe...

Not sure I understand exactly what u say, please send me a photo.

 

[mark78]

Wizard EVOLVED very beautiful and high quality MOD. Really want to afford such a purchase). How can this be done? It's my birthday in late October, I want to buy myself a gift.

The WAE ( wizard's apprentice evolved)will be next ... SS version of WE with small design changes.

 

[onuco]

If anyone wants to change a 18650 tube for a 18500 tube please PM me. I got the wizard in 18650 but all my batteries are 18500 and i really like this size.

 

[mark78]

Not a good ideea, you risk to have the engraving on the wrong side and the serial number will not fit the size of the WE.

 

[onuco]

Not a good ideea, you risk to have the engraving on the wrong side and the serial number will not fit the size of the WE.

Salut,
You are right. i never thought of that. How can i get an extra tube for this? or, once i bought the 18650 im stuck with it in this size?
That would be so bad, cause i really wanted a 18500 but i only found a 18650.

 

[mark78]

Salut,
You are right. i never thought of that. How can i get an extra tube for this? or, once i bought the 18650 im stuck with it in this size?
That would be so bad, cause i really wanted a 18500 but i only found a 18650.

For now, we can not help you, but we will try to produce some tubes to be sold as spare parts.

 

[Ape]

It will be nice if the new Wand tank would be made with Pyrex...
Will it ?

 

[mark78]

It will be nice if the new Wand tank would be made with Pyrex...
Will it ?

We will...

 

[jayny]

are the wizard evolved mods gonna be in stock in the near future?...wouldn't mind picking one up!

 

[Duckonquack]

are the wizard evolved mods gonna be in stock in the near future?...wouldn't mind picking one up!

Likely not real soon, in the past there's been several months between runs, they did a titanium series then a stainless steel series, and then I think they did a second titanium, all within like 8-9 months iirc

Those were also 'simpler' mods (AKA did not have a DNA chip + less parts)

either way I wouldn't expect another run of the WE or WEA anytime in the next few months

I'm probably wrong and can't speak for Mark Bugs obviously but the art that these guys produce takes time

 

[mark78]

are the wizard evolved mods gonna be in stock in the near future?...wouldn't mind picking one up!

Likely not real soon, in the past there's been several months between runs, they did a titanium series then a stainless steel series, and then I think they did a second titanium, all within like 8-9 months iirc

Those were also 'simpler' mods (AKA did not have a DNA chip + less parts)

either way I wouldn't expect another run of the WE or WEA anytime in the next few months

I'm probably wrong and can't speak for Mark Bugs obviously but the art that these guys produce takes time

In few weeks is ready a new SS series. Soon will post photo.

 

[jayny]

Thanks, will keep any eye out

 

[mark78]

First pictures with the Wizard's Apprentice Evolved:

Yes, the design is a bit changed for the WAE ... that this is not the final finish ... it is possible for the design to be upgraded.
There are other changes but we will tell you about later on... (the diameter is 21mm)

 

[jayny]

looks nice, how much more will it weigh...