Wizard/ Vrajitorul Smallest and lightest mod ever made
- Thread starter mark78
- Start date
- th_trl_thread_readers 0
- Status
WOW!!! BEAUTIFULwhat price will it be selling at?
The price shoud not exceed the price of the first batch of the Wizard (incl VAT) even if this batch has several important improvements.
help... i finally got a replacement tank for the Wand Ti.... simple unscrew pos post to fit the tank in and back again....
problem: after setting up a coil I'm not getting any connectivity to the atomizer... even if i take the wick out and just have the coil attached.
I have a flat table top Ohm meter and getting no readout.
It actually worked for a few minutes then i got resistances going way up... started with 1.1 Ohm, to 1.9 and then way off the charts; 3.+ Ohms to 5.+....
i took it apart and cleaned every thing in alcohol, started over without a wick just to see if the center post is getting anything, and nothing.
What am i missing?
problem: after setting up a coil I'm not getting any connectivity to the atomizer... even if i take the wick out and just have the coil attached.
I have a flat table top Ohm meter and getting no readout.
It actually worked for a few minutes then i got resistances going way up... started with 1.1 Ohm, to 1.9 and then way off the charts; 3.+ Ohms to 5.+....
i took it apart and cleaned every thing in alcohol, started over without a wick just to see if the center post is getting anything, and nothing.
What am i missing?
Mate,
I do not know what are you measuring ... try to post some pics, but the + post has 3 metal parts .. starting from top you have the screw next the post and then the atomiser contact ... so all thoose are made from matal...there is no way to have no conductivity!!! I belive you have no contact between the mod and the wand!
thanks Mark, it could be the bottom contact screw not touching. With positive pole, I think there is a correlation between the top being perfectly tightened (with the wire hole pointing to the wick hole) and how far the bottom contact screw sticks out to touch the mod connector pin.
It seems to be flush, and i think it should be about 1/2 to 1 mm beyond the thread cylinder - correct?
So i will try to tighten the positive screw a little more....I'll post some pics when i get to it again.
i tightened the pos post a quarter turn; see it away from wick hole.... if i attach a dmm pins to the wire hole area it reads 1.3 Ohm. If i put Wand on ohm reader, or try to fire, it will not fire or show connection.
Is the Wand working if you put it in your mod? If yes, then you have no connection between ohm reader and the Wand.
If it is not working on your mod, try to place a small piece of kantal on the bottom of your 510 thread and screw the wand and see if that will solve your problem.
You are right!!!
We just measure the Wizards and thoose are the results:
Weight: L = 37g, M = 32g, S = 27g
Hello Mark78, I sent you a message a few days ago regarding my WA, just wondering if you received it. I also submitted a message on the mark bugs site. Thank you!
won't the kanthal melt?
I'll give it a try when i feel brave....
Hello everyone,
We are pleased to announce the release of our brand new and improved series of... the vaping magician you have all been asking for... the Wizard!!!
The Wizard will be available on our website starting Wednesday May 29th, 22:00 local time in Romania (20:00 GMT) and later on also on C9V.
The price is EUR 289, free shipping and PayPal fee.
Improvements to the new model include implant-grade Titanium manufacturing, fine mechanical engraving, enhanced electronics and an even better performing bottom part.
The full description is available here:
Wizard
We hope that you will enjoy the Wizard and that it will bring another drop of magic to your vaping.
IMPORTANT NOTICE FOR ALL NON-EU CUSTOMERS:
Please be advised that, upon shipment, in order to abide all laws and regulations, we
must declare the true value of the package we are sending you. Therefore, depending on
your country of residence, local customs and other taxes may apply when you receive your
package.
We cannot influence such legal local matters in any way. What we can do however from our
part, is to offer all our non-EU customers an extra token of appreciation for their
purchase. Hence, we have decided to ship all our non-EU orders via courier service,
probably UPS (we are offering free shipping anyway), which means delivery should take
place within 5 working days, irrespective of your location.
Please be advised that, if you are living in a country where the electronic cigarettes
are forbiden, you are ordering on your own risc, we can not help you if there will be any
issues with you local customs.
Sincerely,
The Mark Bugs team
We are pleased to announce the release of our brand new and improved series of... the vaping magician you have all been asking for... the Wizard!!!
The Wizard will be available on our website starting Wednesday May 29th, 22:00 local time in Romania (20:00 GMT) and later on also on C9V.
The price is EUR 289, free shipping and PayPal fee.
Improvements to the new model include implant-grade Titanium manufacturing, fine mechanical engraving, enhanced electronics and an even better performing bottom part.
The full description is available here:
Wizard
We hope that you will enjoy the Wizard and that it will bring another drop of magic to your vaping.
IMPORTANT NOTICE FOR ALL NON-EU CUSTOMERS:
Please be advised that, upon shipment, in order to abide all laws and regulations, we
must declare the true value of the package we are sending you. Therefore, depending on
your country of residence, local customs and other taxes may apply when you receive your
package.
We cannot influence such legal local matters in any way. What we can do however from our
part, is to offer all our non-EU customers an extra token of appreciation for their
purchase. Hence, we have decided to ship all our non-EU orders via courier service,
probably UPS (we are offering free shipping anyway), which means delivery should take
place within 5 working days, irrespective of your location.
Please be advised that, if you are living in a country where the electronic cigarettes
are forbiden, you are ordering on your own risc, we can not help you if there will be any
issues with you local customs.
Sincerely,
The Mark Bugs team
Last edited:
The wizard orders will be shipped on monday via UPS and probably in 5 days will be at your door.
Thank you all and congratulation to the new owners!
Thank you all and congratulation to the new owners!
hey thanks took a chance and ordered a reactor tank for it already got my wizard w009L i really love it thanks so much got to get one from cloud 9 vaping too a medium wanted a small but they didnt have any in stock anymore im hoping i got w009M for the one from them but only time will tell it should be here in the next week thanks mark awesome product looking forward to getting a 18350 one in the future to complete all 3 in the series now im gonna wait for the wand or the chalice to go with it
got my wizard w009L i really love it thanks so much got to get one from cloud 9 vaping too a medium wanted a small but they didnt have any in stock anymore im hoping i got w009M for the one from them but only time will tell it should be here in the next week thanks mark awesome product looking forward to getting a 18350 one in the future to complete all 3 in the series now im gonna wait for the wand or the chalice to go with it Hello all,
This is the endd of Wizard and Wizard's Apprentice episode, the new episode is Wizard EVOLVED and you cand find it named the same in modder/accessories supplier forum, we hope you will enjoy the new episode.
Thank you all,
markbugs team
This is the endd of Wizard and Wizard's Apprentice episode, the new episode is Wizard EVOLVED and you cand find it named the same in modder/accessories supplier forum, we hope you will enjoy the new episode.
Thank you all,
markbugs team
- Status
