xvostick clone any owners?

[BoomerFZ1]

Yes. One of the two we had did that new coil thing. Ironically, the one I have not (packed and leaving) hadn't done it. Although, in fairness, I hadn't pushed it very hard at all. So it may.

Everything else on it was perfect though, so for the $150+ savings, I'd call that a minor inconvenience. I don't like the dent and screw missing, but yours is the first incident of that nature that I've seen. I'd hope it's not widespread.

It might be worth returning. They're not THAT bad (are they?). I'm not sure...

VERY sorry to read this, Boomer. I hope you can get it worked out.

It took three weeks to get to me. I can get another screw and scratches usually tend to blend in with my vape gear if you get my meaning. And as I mentioned, I'm definitely replacing the board but I was just wondering if anyone else was encountering this issue. Overall, all being the same, I'd place the order again. Such a great device. Might even put some chicken aside for an authentic.

 

[DPLongo22]

It took three weeks to get to me. I can get another screw and scratches usually tend to blend in with my vape gear if you get my meaning. And as I mentioned, I'm definitely replacing the board but I was just wondering if anyone else was encountering this issue. Overall, all being the same, I'd place the order again. Such a great device. Might even put some chicken aside for an authentic.

I sure wish someone had told me he'd have taken a couple of chickens for 'em before I plopped down five-OH-OH!

 

[BoomerFZ1]

I sure wish someone had told me he'd have taken a couple of chickens for 'em before I plopped down five-OH-OH!

Chicken...Bones...Duckets... Not sure what the exchange rate is for "five-OH-OH" (oy!), but I have a feeling I'll be putting whatever aside for quite awhile. And I'm sure something else will catch my eye before then.

 

[DPLongo22]

Chicken...Bones...Duckets... Not sure what the exchange rate is for "five-OH-OH" (oy!), but I have a feeling I'll be putting whatever aside for quite awhile. And I'm sure something else will catch my eye before then.

I know - just messing around, partially related to some pains I had with the purchasing experience.

We bought two, at $250 USD each - hence $500. Probably would have been more accurate, in MY case, to write it as "five-oh-OH!", at is was the last parts that were the most painful.

I'm anxiously waiting to see what tops the Xvo, strictly from a design perspective. I'm trying to picture the mod and haven't been able to (yet). The thing just does it for me - no idea why.

Funny folks, us vapers.

 

[ZeroOhm]

It would be *nice* to own an original given the great design and with vapegeddon approaching fast does anyone know if the LE Xvo has a DNA40 with atty lock?

Vape on!

 

[drugarth]

I really love the xvo look, but I can picture a mod even more to my liking...a 18350 version, with the screen on top and the buttoncap below. It would have an extender, like the microstick, for bigger batteries. And in a perfect world it would also be water resistant but that's probably stretching it
Ooh and the board inside would be like a Dicodes board, which has all the bells and whistles

Aaah one can only dream......

 

[drugarth]

It would be *nice* to own an original given the great design and with vapegeddon approaching fast does anyone know if the LE Xvo has a DNA40 with atty lock?

Vape on!

The newer version of the regular Xvostick has the atty lock feature, I assume the LE version will have it too, but cant make sure as I only have a good old regular original.

 

[pokemom]

It's here!! Can't figure out what tank to put on it, or how to work it (no instructions) but I'm playing with it!!!

Sent from my iPhone using Tapatalk

 

[rhelton]

Everyone still getting along with their Sticks? I am finally able to order one tomorrow.

 

[drugarth]

It's here!! Can't figure out what tank to put on it, or how to work it (no instructions) but I'm playing with it!!!


Sent from my iPhone using Tapatalk

Nice, congratz!
Btw: there's a dna40 manual here:

http://www.evolvapor.com/datasheet/dna40.pdf

Shows how it all works!

 

[drugarth]

Everyone still getting along with their Sticks? I am finally able to order one tomorrow.

Nice! Will be a bit of a wait, but worth it! And yuppers, mine still works perfectly!

 

[rhelton]

Nice! Will be a bit of a wait, but worth it! And yuppers, mine still works perfectly!

Ok good. I do not do TC it seems from what I have read there is a couple issues with that only. I am impatiently waiting already hehehe.

 

[pokemom]

Nice, congratz!
Btw: there's a dna40 manual here:

http://www.evolvapor.com/datasheet/dna40.pdf

Shows how it all works!

thank you so much!!!!!

 

[DPLongo22]

Congrats, @pokemom. I have little doubt that it will perform better than your(our) football team.

For all, there was a somewhat disheartening report, in another thread, about a recent experience with an authentic Xvo. I just want all cards to be on the table before anyone drops their dimes into the machine.



I'm not saying that it's indicative of what we can all expect, but it is information that should be known. Do with it what you will.

 

[pokemom]

Congrats, @pokemom. I have little doubt that it will perform better than your(our) football team.

For all, there was a somewhat disheartening report, in another thread, about a recent experience with an authentic Xvo. I just want all cards to be on the table before anyone drops their dimes into the machine.



I'm not saying that it's indicative of what we can all expect, but it is information that should be known. Do with it what you will.

I wonder if the xvo people can just fire a coach every time something goes wrong? I wonder if there would be anyone left.

 

[DPLongo22]

I wonder if the xvo people can just fire a coach every time something goes wrong? I wonder if there would be anyone left.

LOL!!!

"No."

 

[Jerry88]

I've just got my clownstick and i've got to say im happy with it as of now (4hours usage)!

Its been working nicely, prompting new coil whenever i re-attach the atty. It fits nicely with my aromamizer (3ml) which i purposely bought it to match the clownstick. I was alittle worried it couldnt fit since its 23mm as reported (that is without the hole band which it does not require the band since the hole is covered by the curve steel of the stick). Ill share a picture of it if anyone is interested.

Ive so far using only kanthal with tc switched off. I observe the ohm reading change when it fires. Not by much its about +/- 0.05.does anyone having this same issue?

I know it is not advisable to direct charge the device through usb port but i am wondering if anyone know if the device will indicate fully charged battery? Ive put my device to charge and the battery bar is indicating full but the led still indicates red. Anyone has any idea on this?

 

[drugarth]

@Jerry88 please share a pic! I was looking at the aromamizer, but skipped it because I also had worries if it would fit the Xvostick...so a pic would be appreciated

Sorry, but I don't charge through USB...ever....so can't help you there

 

[jmarkus]

I've just got my clownstick and i've got to say im happy with it as of now (4hours usage)!

Its been working nicely, prompting new coil whenever i re-attach the atty. It fits nicely with my aromamizer (3ml) which i purposely bought it to match the clownstick. I was alittle worried it couldnt fit since its 23mm as reported (that is without the hole band which it does not require the band since the hole is covered by the curve steel of the stick). Ill share a picture of it if anyone is interested.

Ive so far using only kanthal with tc switched off. I observe the ohm reading change when it fires. Not by much its about +/- 0.05.does anyone having this same issue?

I know it is not advisable to direct charge the device through usb port but i am wondering if anyone know if the device will indicate fully charged battery? Ive put my device to charge and the battery bar is indicating full but the led still indicates red. Anyone has any idea on this?

ive charged mine (3fvape) and my light goes from red to green when charged. works perfect.

 

[ian91]

Everyone still getting along with their Sticks? I am finally able to order one tomorrow.

I have had my 3FVape version for just about 2 months now and it still works great.