XvoStick users?

Status
Not open for further replies.

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,963
182,720
Midworld
Anyone have occasion to need some new buttons for their Xvos? I would like to change my buttons out to brass on my Pro but I'll be darned if I can find them on the Mini-ecig site...

Try sending them a message, Jim.

If not, maybe you and I can work something out (since my red one has brass buttons). I'm assuming they're the same, but we should check that.

I would need for you to do the work though, and it's not without a bit of trepidation (since I'm concerned about the hermetic sealing if taken apart).

We can discuss, if you'd like. No harm there. But send them a message first, please. They may respond. :facepalm:
 
  • Like
Reactions: Katdarling

Jim-

GCS E (1) + V (1) + M (1) = 3
ECF Veteran
Verified Member
Dec 18, 2013
1,329
5,811
Los Angeles County, Ca. USA
Try sending them a message, Jim.

If not, maybe you and I can work something out (since my red one has brass buttons). I'm assuming they're the same, but we should check that.

I would need for you to do the work though, and it's not without a bit of trepidation (since I'm concerned about the hermetic sealing if taken apart).

We can discuss, if you'd like. No harm there. But send them a message first, please. They may respond. :facepalm:

Ill send them a message and see if they will part with some. And no worries, I'll change out the brass buttons from my standard Xvo if the mood really comes over me. Thanks for the offer though man, it's appreciated!
 

nevillebartos

Senior Member
ECF Veteran
Verified Member
Mar 30, 2015
141
100
Vic, Aus
Oh, gotcha.

So, have any of these brass-haters found a fix for it yet? I dont necessarily 'hate' brass, for me its more about the maintenance. Brass tarnishes, SS doesnt for the most part. Id rather not have to do a routine button polishing, but i respect those who like brass and do so for aesthetic purposes.

Besides ordering it in the device straight off miniecig, i dont see an easy way to switch over, besides the clone method i mentioned(or another authentic, but why lol)

I wish Chels would offer the SS buttons as spares, i dont see it on his site or anywhere online :(


Was just having a look through what I've missed. I have an SS xvo, actually pro xvo now, but also have a vapor flask with brass battery caps and on that I also run a brass airflow ring on the squape. I use a light duty non toxic cleaning cloth to polish those bits up, the cleaning cloth is damp-ish but there's no liquid or anything squeezes out of it, I imagine the buttons would be quite easy to clean with such a thing.
 

Noodles11

Senior Member
ECF Veteran
Verified Member
Oct 21, 2015
138
391
Jim has lost his Pro Xvo Stick I needed a another one for my Rose 3 to cuddle up to :)

Ive got three choices in Aus in batterys ??

Keeppower below is 65.2 and 5200mah ???

2 X 26650 Keeppower 5200 mAh rechargeable Lithium ion batteries, yes 5200mAh

Or
mxjo 66.6mm ?? tool long ???

MXJO 26650 battery 3500 mah

Or
MNKE -66.5mm

2 X MNKE IMR 26650 4000 mAh rechargeable Lithium ion batteries tested to 4350mAh

I like the sound of the keeppower 5200mah and its 65.2mm has any had any experience with any of these.

Appreciate you stick experts advice :confused:

Cheers Jim for the stick,great guy to deal with :thumbs:
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,963
182,720
Midworld
Jim has lost his Pro Xvo Stick I needed a another one for my Rose 3 to cuddle up to :)

Ive got three choices in Aus in batterys ??

Keeppower below is 65.2 and 5200mah ???

2 X 26650 Keeppower 5200 mAh rechargeable Lithium ion batteries, yes 5200mAh

Or
mxjo 66.6mm ?? tool long ???

MXJO 26650 battery 3500 mah

Or
MNKE -66.5mm

2 X MNKE IMR 26650 4000 mAh rechargeable Lithium ion batteries tested to 4350mAh

I like the sound of the keeppower 5200mah and its 65.2mm has any had any experience with any of these.

Appreciate you stick experts advice :confused:

Cheers Jim for the stick,great guy to deal with :thumbs:

I'm a useless source of information where 26's are concerned, Noodles. Nice score though, and congrats to both you AND Jim(dash)!!!
 
  • Like
Reactions: Katdarling

Noodles11

Senior Member
ECF Veteran
Verified Member
Oct 21, 2015
138
391
No Probs DP the guy I and a lot of other AVF Member's get there battery's off is really good and knows his stuff.

supersports600

Items in supersports600 store on eBay!

He said the keep power he has tested himself and the 5200mHa is legit but not recommended to go over 25-30watts

The 2 X MNKE IMR 26650 4000 mAh he said are better suited to low ohm high wattage.

I got two of each cant wait to get Rose 3 & Gem 2 set up on the sticky,s :)

Only 3 1/2 weeks to go sigh !!!! :yawn:
 

Jim-

GCS E (1) + V (1) + M (1) = 3
ECF Veteran
Verified Member
Dec 18, 2013
1,329
5,811
Los Angeles County, Ca. USA
I'm a useless source of information where 26's are concerned, Noodles. Nice score though, and congrats to both you AND Jim(dash)!!!

Any 66mm will work just fine. I would obviously stay above 20amps. I had very good luck with the MXJO 4200mah battery @22amps. Get close to those specs you be golden. :)

Ooops, wrong guy replied to..info good all the same :D
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,963
182,720
Midworld
Yes DP sorry it arrived home the morning after I left to go to work for 5 weeks offshore !!:glug:

Don't you just love it when ....e like that happens :-x

If I'm to answer honestly, well, NO. ;)

I'm glad it's at least there waiting for you.

Any 66mm will work just fine. I would obviously stay above 20amps. I had very good luck with the MXJO 4200mah battery @22amps. Get close to those specs you be golden. :)

Ooops, wrong guy replied to..info good all the same :D

It's all well & good, Jim. I'm sure he's tracking... :vapor:
 
  • Like
Reactions: Katdarling

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,963
182,720
Midworld
Gone a bit quiet here :tumble:

Yeah - most of the US is obsessed with the issues related to age verification, and are comparing notes/condemning vendors for decisions made designed to remain on life-support for four more months, after which it all comes crashing down anyway. It's a spit-show of epic proportions, and good people are being dragged through the mud as they gasp for their last four months of air. It's clear now that the ones who decided to close up shop early (pre 8-Aug) were the wise ones. :(

I'm sure glad I invested in these two Xvo's, as they should last me a good, long time.

It's "funny", the impact of one's decisions as they walk, or don't walk (as it may be) into an election booth. We 'mercans voted, and we lost.

"Freedom's just another word..."

 
  • Like
Reactions: Katdarling

Jim-

GCS E (1) + V (1) + M (1) = 3
ECF Veteran
Verified Member
Dec 18, 2013
1,329
5,811
Los Angeles County, Ca. USA
Last election cycle we had a candidate lamb basted for calling 47% of the populace a bunch of people with their hands out. He should have added it was their fracking IQ as well. Ones vote does matter and the 50+% now are voting us all right into a nanny state. I'll prolly regret selling the ProStick lol[emoji23]


Sent with my communicator by Tapatalk[emoji92]
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,963
182,720
Midworld
Last election cycle we had a candidate lamb basted for calling 47% of the populace a bunch of people with their hands out. He should have added it was their fracking IQ as well. Ones vote does matter and the 50+% now are voting us all right into a nanny state. I'll prolly regret selling the ProStick lol[emoji23]


Sent with my communicator by Tapatalk[emoji92]

A much more concise presentation, indeed. Thank you, Sir Dash. ;)

And you may (regret it). :(
 
  • Like
Reactions: Katdarling
Status
Not open for further replies.

Users who are viewing this thread