XvoStick users?

[Freedom2Vape]

I use a few devices every day (few, ha ha). There are some I don't think twice about. My Provis stay battery in, and tanked. I have true faith in them. A good percentage of my devices are fixed batts. Even loosening the tank is helpful. And with the Xvo, I also can simply loosen the batt cap and it's completely non-functional.

So let's have an experiment, pokes. Tonite, either remove or loosen every topper. Time yourself. We'll compare notes! (Anyone else, feel free to take part in my silly game.)

I am participating - 4 mods: 2m 49.42s
XvoStick with Hurricane tank
Dicodes 2380T with UTA
Provari P3 Ti with Tilemahos
Provari Ti with Kabuki
Timings included removal of tanks - setting them on 510 atomizer base, wiping any residual e-liquid from the devices and loosening the battery cap on the Xvostick.

 

[Freedom2Vape]

Sorry - I was a bit light - usually have a couple more, but the tanks ran dry earlier and I removed them for a dry burn and re-wick later.

 

[DPLongo22]

I did loosen the cap on my SS Xvo.

 

[Katdarling]

I am participating - 4 mods: 2m 49.42s
XvoStick with Hurricane tank
Dicodes 2380T with UTA
Provari P3 Ti with Tilemahos
Provari Ti with Kabuki
Timings included removal of tanks - setting them on 510 atomizer base, wiping any residual e-liquid from the devices and loosening the battery cap on the Xvostick.

Did the 2m 49.42s include the writing of this post?

 

[pokemom]

I use a few devices every day (few, ha ha). There are some I don't think twice about. My Provis stay battery in, and tanked. I have true faith in them. A good percentage of my devices are fixed batts. Even loosening the tank is helpful. And with the Xvo, I also can simply loosen the batt cap and it's completely non-functional.

So let's have an experiment, pokes. Tonite, either remove or loosen every topper. Time yourself. We'll compare notes! (Anyone else, feel free to take part in my silly game.)

I would love to play!!! Out of town at a conference right now, but when I get home you're on!!! [emoji41][emoji106]

 

[DPLongo22]

I would love to play!!! Out of town at a conference right now, but when I get home you're on!!! [emoji41][emoji106]

Welcome to The Gauntlet. Vapin' style.

 

[Nomad2000]

My Xvostick with Rose V2-S

 

[DPLongo22]

My Xvostick with Rose V2-S

View attachment 511442

It's beautiful, Nomad. You like it, yes?

How long have you had it, and have you had any issues to date?

 

[Freedom2Vape]

Did the 2m 49.42s include the writing of this post?

Darn - was I supposed to include that time too?

ETA: Ok - I'm slow, but after y'alls surgery, I wanted to be sure there wasn't any moisture showing on the Xvostick so I did work a bit longer on it with a "vapor" towel.

 

[Freedom2Vape]

I received an e-mail from mini-ecig informing me the XvoStick SS was back in stock and that if I was no longer interested, to please let them know why. I clicked on their link to the website and see that there is now an option for an XvoStick Light?
http://mini-ecig.com/battery_blocks/XS_Light
XvoStick Light (shipping in 3 weeks) - Mini ECIG

It has the same features as the XvoStick - the only difference is the straight horizontal line separating the top and bottom sections? Oh and the price, which is significant for a difference ($56) of a straight line versus the "s" line in the standard?

On a secondary note: For those who have the XvoStick LE, is your screen centered between the two screws on the bottom plate (under the side where the tank sits) ? I noticed on the website, the screen of the standard XvoStick is more centered in the bottom plate.
The one on the left is the picture from the mini-ecig website of the standard XvoStick - the one on the right is the bottom of my LE. Is this one of the LE features?

 

[Katdarling]

My Xvostick with Rose V2-S

View attachment 511442

Come. Let's paint the town.

 

[Katdarling]

I received an e-mail from mini-ecig informing me the XvoStick SS was back in stock and that if I was no longer interested, to please let them know why. I clicked on their link to the website and see that there is now an option for an XvoStick Light?
XvoStick Light (shipping in 3 weeks) - Mini ECIG

It has the same features as the XvoStick - the only difference is the straight horizontal line separating the top and bottom sections? Oh and the price, which is significant for a difference ($56) of a straight line versus the "s" line in the standard?

On a secondary note: For those who have the XvoStick LE, is your screen centered between the two screws on the bottom plate (under the side where the tank sits) ? I noticed on the website, the screen of the standard XvoStick is more centered in the bottom plate.
The one on the left is the picture from the mini-ecig website of the standard XvoStick - the one on the right is the bottom of my LE. Is this one of the LE features?
View attachment 511943

Welp...

DPL and I looked at this tonite. We both came to a conclusion and a name for it, but we don't wish to be rude.

PMs advisable on this one.

The difference is minor, but yet, it's rather strange. Then again, perhaps it's not strange in consideration of the reduction in price.

As far as the pics go, F2V, my Xvosticks look like your pic on the right: the screen is centered between the 2 screws.

The one on your left side pic looks like the the Xvo Light.... the screen is somewhat centered across the bottom, but there is an extra bit of a triangular section (with another screw) at the right side. What is that?

 

[Katdarling]

I'm not sure sure if this has yet been posted, but enjoy. Another review.

 

[Freedom2Vape]

Welp...

DPL and I looked at this tonite. We both came to a conclusion and a name for it, but we don't wish to be rude.

PMs advisable on this one.

The difference is minor, but yet, it's rather strange. Then again, perhaps it's not strange in consideration of the reduction in price.

As far as the pics go, F2V, my Xvosticks look like your pic on the right: the screen is centered between the 2 screws.

The one on your left side pic looks like the the Xvo Light.... the screen is somewhat centered across the bottom, but there is an extra bit of a triangular section (with another screw) at the right side. What is that?

Thanks for letting me know that I wasn't crazy. I hadn't noticed the screen placement of the Xvo Light. The picture I posted was one of those shown for the XvoStick (standard?). From what I can tell on the mini-ecig website, it appears that the picture on the left (which is from their website) had a separate piece that housed the button assembly?

I believe this is the button assembly - but my XvoStick doesn't look like it uses this - the buttons appear different - here is another angle.

Ok, I think I understand it better - this is a picture from the top without the "S" top, which contains the "seatbelt". The picture below shows this from the bottom.

Now this is the part that confuses me - because I'm not sure if the screen is shown in approximately the area that it will be placed on the bottom of the device or if they flip the screen (so that red piece will be facing the top of the mod) and have the edge next to that half moon piece on the right part of the picture - does any of that make sense?

I'm tempted to take it apart and see, but knowing me, when I put it together, I'll have those confounded extra pieces that I won't know where they came from. I think for now, it is working without any issues - I'm enjoying it, so it stays together until the curiosity drives me insane or it malfunctions. I was just curious.

 

[DPLongo22]

Great shots, F2V, and the closest I'll ever get to taking it out.

I'm too tired to type much, but in reference to Kat's vague comments, let's just say that we're not thrilled with the Lite design.

It reminds me of an old saying...

 

[Freedom2Vape]

...?

 

[DPLongo22]

...?

LOLOLOLOL!!!!!!

Not exactly. ;-)

 

[TKS]

My Xvostick with Rose V2-S

View attachment 511442

What are the differences just wondering?

 

[Katdarling]

Thanks for letting me know that I wasn't crazy. I hadn't noticed the screen placement of the Xvo Light. The picture I posted was one of those shown for the XvoStick (standard?). From what I can tell on the mini-ecig website, it appears that the picture on the left (which is from their website) had a separate piece that housed the button assembly?
View attachment 512017
I believe this is the button assembly - but my XvoStick doesn't look like it uses this - the buttons appear different - here is another angle.
View attachment 512018
Ok, I think I understand it better - this is a picture from the top without the "S" top, which contains the "seatbelt". The picture below shows this from the bottom.
View attachment 512029
Now this is the part that confuses me - because I'm not sure if the screen is shown in approximately the area that it will be placed on the bottom of the device or if they flip the screen (so that red piece will be facing the top of the mod) and have the edge next to that half moon piece on the right part of the picture - does any of that make sense?

I'm tempted to take it apart and see, but knowing me, when I put it together, I'll have those confounded extra pieces that I won't know where they came from. I think for now, it is working without any issues - I'm enjoying it, so it stays together until the curiosity drives me insane or it malfunctions. I was just curious.

F2V, that looks mighty thorough to me, but I think I'm gonna need a good nite's sleep and some morning caffeine to fully understand what you said. I'll give it a go when time permits!

 

[Nomad2000]

What are the differences just wondering?

nothing but the color~~~