Youde Balrog 70 Watt Kit

Status
Not open for further replies.

Foggy Road

Vaping Master
ECF Veteran
Verified Member
Jun 22, 2015
4,048
15,790
71
Garland,TX
OK folks I finally got home and got my hands on the Balrog kit that I won. The manual does mention SS 316L capability. Haven't put a battery in it and don't intend to. I do have a coil question tho.

Both the box and manual list as included 1 Kanthal coil and 1NI200 coil but there is a third and different coil also preloaded in the tank. I have 1 coil marked 'NI200 .15 ohm' clearly the Ni coil. 1 coil marked '1.8 ohm 15-22w' should be the Kanthal. But inside the tank is a 3rd unlisted coil marked '0.5 ohm 20-38w' should I assume this is just another Kanthal? Or might it be 316L?
Anyone know? I'd just like to be able to tell whoever I pass this thing on to.
 
  • Like
Reactions: SS stingray

Chuck64

Super Member
ECF Veteran
Nov 17, 2015
884
1,026
60
NV. USA
I won mine in the heaven gifts contest a few months ago. So far it still works but the black finish has come off in places and I touched it up.

The main problem has been with the fire button sticking. I removed it to clean but it wouldn't go all the way back on and still sticks unless I press it a certain way. My tank leaks even after replacing the o rings. Soon as I unscrew the top it starts leaking. Anyway it works.
 

Foggy Road

Vaping Master
ECF Veteran
Verified Member
Jun 22, 2015
4,048
15,790
71
Garland,TX
Why won't you use it ? If you don't want it send it to me ........
Just no interest in it. I'm strictly 650 mah Ego/Evod VV with Protank type. Do have a few 3-6v 5-15w VV-VW 18350 Mods that I've rescued from the clearance shelves in prep for deeming. Have no use for anything more. Got a like new Vamo V5 to trade?
 

Roadtrip635

Vaping Master
ECF Veteran
Aug 29, 2015
6,110
10,358
Texas
Got a little problem with one of my Balrog. Lost one of the magnets that hold on door. I did email UD to see if I can get another. They have yet to reply. Seems poorly glued in . So far 2 magnets have fallen out. maybe they never heard of super glue...........
I've seen similar magnets listed at Gearbest and Fasttech, don't know if they have the size you need though. Somewhere like Harbor Freight or a hobby store like Michael's or Hobby Lobby might have them as well.
 
  • Like
Reactions: SS stingray

SS stingray

Super Member
ECF Veteran
Oct 2, 2014
400
532
Port Charlotte. Florida
I have several small magnets from my 3 Cloupor minis. They are too big but I may be able to grind them to fit. Rite now the one magnet holds on the door. My wife uses the Balrog as her away from home vape since she loves the lanyard . I will try a fix when she complains. I hate to grind down such a small magnet.
 
  • Like
Reactions: Roadtrip635
Status
Not open for further replies.

Users who are viewing this thread