Zenesis Informational/Help thread. Please Post questions and answers here.

[Mermaaan]

Welcome!


Sent from my iPad using Tapatalk

 

[FACE MEAT]

The results are in...

With 3 wraps of 28 gauge, I get an additional .35 volt drop with the stock setup compared to the low-ohm kit.

$8.95 well spent, in my opinion.

 

[Mermaaan]

Nice! Thanks for doing that. I should probably get a meter myself. Been doing some other mods to my zens that have me curious to compare vs stock.


Sent from my iPad using Tapatalk

 

[FACE MEAT]

Amazon has some really inexpensive ones that work well enough for our application.

 

[Mermaaan]

Thanks, I'll definitely have a look there. Love being able to see the reviews and compare too.


Sent from my iPad using Tapatalk

 

[Big Hitter]

The results are in...

With 3 wraps of 28 gauge, I get an additional .35 volt drop with the stock setup compared to the low-ohm kit.

$8.95 well spent, in my opinion.

Well that is some good news, I better get off my bottom and order up 5 of those.

Thanks for letting us know, I had a feeling that is about the result we would see. I did some expermenting long ago with my first zen and some super size springs. These finger washers look like just the ticket .....

 

[Big Hitter]

^^ You convinced me 4 Sub-ohm kits on the way to my house

Thanks for the info FACE MEAT

 

[Morandir835]

Sub ohm kit just arrived today, installed it and will be testing it with coils ranging from 0.5-1.1 over the next few days. Will do some dual sub ohm testing later. Throw isn't that much different than that of the newer version of the switch. If going from the original Zen 2 switch can see why some might need some getting used to it.

 

[Morandir835]

With using a 0.5 ohm coil and a 1600mah aw battery would get 3.49v on load with standard spring, with the sub ohm kit 3.74v. Well worth the 8.95 for the upgrade kit...

 

[FACE MEAT]

That seems to be on par with my 0.3 volt increase on a 1 ohm(ish) coil.

This spring seems to be much more well suited for Sidewinders. I have the feeling the throw would be too stiff for a tube mod.

 

[Morandir835]

Actually Face Meat sir it's really not that different from what the sapphire altus original throw was. The v2 switch with the 2 springs, 3 washers, and floating cup had a much stiffer throw than the v1 switch (or at least mine did).

 

[joaquingt]

hi guys, im about to buy a vv mod, BUT there is a zna comming in 5 days, what will be the max watts ?


Enviado desde mi iPhone con Tapatalk

 

[Shaitaan]

it's using the DNA20, so it's 20w

hi guys, im about to buy a vv mod, BUT there is a zna comming in 5 days, what will be the max watts ?


Enviado desde mi iPhone con Tapatalk

 

[joaquingt]

it's using the DNA20, so it's 20w

ohh, thats sad is that official, couldnt be the dna30 ?

i think i just wait till 15 to make a decision about a provari or zna

thank you guys


Enviado desde mi iPhone con Tapatalk

 

[Mermaaan]

That seems to be on par with my 0.3 volt increase on a 1 ohm(ish) coil.

This spring seems to be much more well suited for Sidewinders. I have the feeling the throw would be too stiff for a tube mod.

This was my experience with the new spring. Did not like the throw on my tube mech. I went back to using a copper spring. I can hit that with my pinky just fine all day.


Sent from my iPad using Tapatalk

 

[Shaitaan]

there is no DNA30...hearing from both Zen~ AND Evolv, that is only a rumor

 

[joaquingt]

ohh yeah i been researching about it, and mike said its a dna20, whos getting a zna ?




Enviado desde mi iPhone con Tapatalk

 

[joaquingt]

there is no DNA30...hearing from both Zen~ AND Evolv, that is only a rumor

heard the same from mike, but





Enviado desde mi iPhone con Tapatalk

 

[Shaitaan]

yeppers, everyone found out this morning through FB, Steam Monkey's and Evolv's site....all the ZNA's will have the DNA30D board.

 

[Shaitaan]

Mike and Brandon were quite sneaky about the release of both...