Zirconium wire and springs

Status
Not open for further replies.

subver

Ultra Member
ECF Veteran
Verified Member
Feb 18, 2012
1,899
863
United States
subver.com
with 7 warps on 0,4mm I get 0,45, so you may need about.......11 wraps? with 0,35 sub.

Ah, thanks Imeo! I think something is wonky with the Steam Engine coil calculator.. if I put in .4mm zirconium around a 3mm bar, to get 0.45ohm it says to use 11 wraps. I'll just have to measure it myself to be sure :p

Thanks! Still waiting to try the Zirconium wire.. was gonna hold off on using it until I get my TAE up and running (still desperately searching for my GG supplies :()
 

NandyDC

Super Member
ECF Veteran
Verified Member
Aug 25, 2009
772
888
San Juan, PR
With the center pins from Fabvape I got 10m of 0.40 Soft Zirconium and the label recommend a TCT of 260 - 280.

Someone has used this wire with TC? I wonder the difference from the GG Zir TCR of 100.

aacbbd832b6d8f634410399a3bb12c73.jpg



Sent from my iPhone using Tapatalk
 
  • Like
Reactions: imeothanasis

ProngATO

Senior Member
ECF Veteran
Verified Member
Apr 17, 2013
112
176
Edmond, OK
I haven’t had any success using any TCR other than ~100 with any platform/device. I use a slightly modified SS TCR and CSV with Zr coils on my DNA75c based box I built. Let me know if you have any success with the higher TCR. (I’ve also tried the “pure Zirconium” dna/Evolv profile and it didn’t come anywhere close).

With the center pins from Fabvape I got 10m of 0.40 Soft Zirconium and the label recommend a TCT of 260 - 280.

Someone has used this wire with TC? I wonder the difference from the GG Zir TCR of 100.

aacbbd832b6d8f634410399a3bb12c73.jpg



Sent from my iPhone using Tapatalk
 
  • Like
Reactions: imeothanasis

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
I haven’t had any success using any TCR other than ~100 with any platform/device. I use a slightly modified SS TCR and CSV with Zr coils on my DNA75c based box I built. Let me know if you have any success with the higher TCR. (I’ve also tried the “pure Zirconium” DNA/Evolv profile and it didn’t come anywhere close).
prong, the tcr for my Zr is 100, exactly as you said!
 
Status
Not open for further replies.

Users who are viewing this thread