Discover unbeatable value with our Cheapest Hyde Vape collection, featuring a range of high-quality disposable vapes at the lowest prices possible. Don't compromise on quality or taste!

Experience unparalleled convenience with our collection of Elf Bar Disposable Product options, designed to deliver both style and satisfaction in one simple package.

I've been starting to study the information on making my own juice, as I've wasted money buying s**** juice I don't ever like. Ok, SO... I see that most juice mixes used 10-20% of the PG based flavor. I'm going for fruity mixes, gonna try adding a bit of hibiscus or elderflower notes.

Are all flavors PG base?

When I mix the fruits I'm think like, elderflower or sweet hibiscus 2% strawberry 1% guava 2% pineapple 1% menthol 1% sweetener 1-2% maybe 1% orange. that would give me round about a 70/30 with a slightly more diluted nicotine, which I'm totally okay with since I chain vape anyways. It's more of just a pacifier.... A tasty one.

A question for the experienced DIY juicers,
So if I were to try this recipe:
2% elderflower
2% strawberry
1% guava
2% pineapple
1% orange
1% sweetener
1% menthol

Would this taste like anything I put in it or what? Which flavors usually pop more? I can just imagine which are strong but I don't know. I would just like to try some crazy medley.

Also I want to just make some testers, so 10ml mixes. 8ml of VG 10.16g 2ml PG 2.08g... uhhh then each percentage of each flavor in grams would be .104 of a gram yes? Provided all flavors are PG base that'll get me at 8ml VG and 3ml PG, which would be around 70/30. Or wait. Lmao. It's 80/30, or does that just become 70/30. Yeah. Math and stuff. The flavoring with 1ml of PG will offset the 8ml of VG yeah?


Also here's a picture just some hilarious reviews I saw on bullcity.

Experience the ultimate convenience and power with the HERO Time Rechargeable Disposable Vape Pen. With up to 3800 puffs, this vape pen is perfect for on-the-go vaping. The rechargeable feature saves you money and allows you to enjoy your favorite e-juice flavors without having to constantly replace your device. Try the HERO Time Vape Pen today!

Suprem-e - Mang ONE Ice
Manufacturer: Italy
This will be the first product from the Italian manufacturer Suprem-e that I will be able to try. I have a very nice supporter - Peva71 - who helps me to report about products like this one. In the description they promise a really special flavour, which is mango, vanilla and biscuit, all spiked with lots of ice. The smell is absolutely fine, with a nice hint of mango and vanilla biscuit. The flavours, unfortunately, go in different directions. Let's start in order. The mango is a very ripe version, just a touch away from being 'nauseating'. It's very sweet and the sweetener is so strong that after steaming it sticks to the roof of my mouth and after a while it makes my mouth taste unpleasant. The biscuit and vanilla are very faintly perceptible as the fruit completely overpowers them. And finally, the ice chunks help the mango to dominate. It's not too cool, but has an icy effect in the aroma. As good as it smells, it tastes as bad. Unfortunately there is more than one flavour problem in this aroma, the mango is strong and overripe, over sweetened, the vanilla biscuit is barely noticeable and the cooling brings out the tanginess of the fruit even more. One could speculate if it wasn't so sweet, or if they had cut back a bit on the mango, I think the idea would have been very good, but the execution didn't leave a pleasant taste, unfortunately. Nevertheless, thank you for the opportunity to taste it, as many might find the test a great help for this flavour vetemednének.

Great person to deal with.

Anyone looking to sell their spare .... or a clone? :-/

Found! via an old post about Kennedy Tactical

NOVA LIQUIDS - PREMIUM MISTER YELLOW
Manufacturer: french
Packaging: 10ml aroma
I have chosen another product from a French manufacturer for today, the lemon tart from Nova Liquides. As it is a relatively new product in our country, thanks to the team at juicyvapour for making it possible to purchase it.
So, a lemon tart to taste, which the manufacturer recommends to be mixed in at 10-15%. I would say in advance, though, that you should definitely not try mixing 15% first, as I think even 10% might be too much for some people. The smell is reminiscent of a delicious cake or tart, not too strong but very pleasant. However, you can already taste the lemon in the taste, which is mixed with the pleasant taste of the cake. The lemon is the first to emerge, and it has a slight sour taste, but it is only faintly detectable. Next would be the cake, which for me came out a little sweet, with a hint of sweetener. It's not too bad, but it might be too much for some people. The whole thing tastes like you're sucking on a lemon curd. Good sugary, sprinkled with grated lemon zest. Getting back to the mixing, I mixed it at 10%, but I didn't dare mix it at less than that because of the weakness of the lemon. I'm a bit divided on this, as I liked the cakey part, but the lemon was weak, the sweetness seemed like too much. I am not disappointed , as our French friends can still surprise us in the world of flavours. My next test will also be from this manufacturer, trusting that only in this case the sweetener bottle tipped over .

The Alchemists - LIME CHEESECAKE
Producer: England
Package size: shortfill
Once again, rummaging through Peva71's box, I came across The Alchemists' Lime Cheesecake, which hopefully presents a delicious dessert flavour. They have a relatively large range of products, ranging from fruit, drink, dessert and mint flavours.
The scent of the product is pleasantly limey, with no other ingredients really noticeable. On inhalation, you can immediately taste the slightly oily sour taste of lime, which immediately changes to a sweet lemony taste on exhalation. I suppose that this sweetness would be due to the cake, but unfortunately the characteristic cheesecake is not present. No matter which tank I tried it in, I couldn't find the cake part in it, which I regret a bit. You can taste some sort of creamy taste in it, but not what is described. That being said, you get a really good lime flavor that is both tart as well as sweet, which could represent the dessert line. If the cheesecake had been left out of the description, I would say "a perfect lime flavour that I could swig all day". Hence I did, I didn't get tired of it even after using it all day. The price is £8.50-11, which obviously isn't worth it if you're REALLY looking for a lime cheesecake, but if you're just looking for a lime flavour, it's certainly a perfect choice.

Page has just gone live on Hellvape's website within the last 24 hours.


So another potential option for MTL vapers.

Absolute bargain for somebody,
£165 + Shipping, can work something out for US buyers
Will be posted via Royal Mail Special Delivery

Special thanks to our title sponsors: Vaporesso and Uwell, for their great gifts to HealthCabin and fans! And we would like to thank Geekvape, Voopoo, Smok, Joyetech, Eleaf, Innokin and more brands for their big supports.

It’s the 14th anniversary of HealthCabin, and we want to share the sweetness with you. 14 years is a long journey, we appreciate your continuous supports to HealthCabin. To celebrate this big day, our biggest sale of the year for retail – 14th Anniversary Sale with 4 vape deals is ready. You can enjoy all deals together, valids from 8th to 21st May. Come join us and save more on your favorite devices~

A. Login to get VIP Price​

• Old customers – Please sign in to get your member VIP price, you’ll see the big price difference for most items.
• New customers – Please create a new account to get the same member VIP price.

B. Over 10,000pcs Gifts for All Orders​

Over 10,000pcs free gifts were ready for you to pick, including vaping devices and marketing materials from big brands.

Free gift is for every order. Your free gift value is 20% of the shopping cart total amount.

For example, if the shopping cart total is $100, you can pick $20 gifts. And you can save another 10% with our promotion coupon code.

Buy more to get more free gifts. Here is the full gifts list, check them out.

Please choose the free gifts at the shopping cart page.

C. Buy 1 Get 1 Free Deals​

We’ll also offer buy 1 get 1 free deals for selected products. Limited offer, first come first served!

Check all selected products here.

D. Extra 10% OFF Sitewide​

Last but not least, we’ve created a 10% OFF discount coupon code, which is available for your whole order. Take the chance!

Details below:

• Coupon: 14TH
• Date: 8th – 21st May, 2023(-0600 GMT)
• Flash Sale products excluded
• Retail Only

E. Giveaway – Free New Vapes​

Healthcabin is now partnering with UWELL & VAPORESSO to giveaway the new Caliburn A3S Kit & LUXE XR Max Kit with 40 winners in total. Ends on 21st May. If you don’t want to buy right now, why not try your luck and win your own mystery kit? Click here to join and win!

Prizes:

• UWELL Caliburn A3S Pod Kit(You need to log in to view this product) – 20 Winners
• VAPORESSO LUXE XR Max Pod Kit – 20 Winners

*If you are luckly to win, you will get one of the prizes randomly.

F. Vape Deal Links​

Here are some other useful links where you can find our best deals:

• Flash Sale – Ultimate cheap vapes
• Clearance – Extremely cheap vapes!

Hello and welcome. I’m very happy to be back with you for another review for Hellvape. Hellvape has quickly become a favorite company of mine to do reviews for. This time I will be taking a look at the Hellvape Dead Rabbit MTL RTA. The DR MTL is 23mm in diameter and has a dual post build deck that accommodates a single coil build. It comes with a 2ml tank section pre-installed but also comes with an optional 4ml tank section. The DR MTL makes use of four independent airflow inlet holes and has honeycomb holes on both sides of the deck that are supposed to help prevent leaking and flooding. As far as I know, this is the first MTL RTA in the Dead Rabbit series of tanks. If these work as good as they look then they should be pretty darn good. Let’s find out.





WHAT’S IN THE BOX?

• 1 Dead Rabbit MTL RTA
• 1 Accessory Bag
• 1 4mL Glass and Long Chamber
• 1 Shoelace Cotton
• 1 0.7ohm Ni80 Clapton Coil
• 1 510 Drip Tip
• 1 User Manual

SPECIFICATIONS AND FEATURES:

• Diameter: 23mm
• Fill System: Threaded top cap
• Build Deck: Dual Post Build Deck
• Coil Configuration: Single Coil Configuration
• Coil Fastening: Top Secured via Phillips Screws
• Glass Capacity: 2mL/4mL
• Airflow: Single Airflow Inlet/ Four options
• Tank Material: Stainless Steel
• Drip Tip: 510 Drip Tip
• Connection: Thread 510
• Contact Pin: Gold Plated

INITIAL THOUGHTS:

The packaging for the Dead Rabbit MTL RTA is very familiar after having tested many Hellvape tanks. The Hellvape name is at the top of the front of the outer sleeve. The very large Dead Rabbit logo symbol is in the center with the Dead Rabbit MTL RTA name on the bottom. The back side of the sleeve gives a list of features and a list of the contents contained inside. Once the sleeve is removed then the familiar orange box is underneath.

I have to say once the orange box was opened and I could see the tank, I was very impressed with the appearance and simply love the drip tips that come pre-installed. They give the appearance of being made of stone but are not. The tips have a metal stepped structure to match the color of the body of the tank. As usual, Hellvape was very generous and sent the gold and silver versions of the tank for my review. I’m not usually a big fan of gold tanks but in this instance the gold is my favorite.

As you can see in the pictures below, there is a 2ml tank section installed on each tank but there is also a 4ml spare tank section included. I like that they made the effort to put the Dead Rabbit symbol on both tank sections. On the bottom right of the insert is a plain black delrin short drip tip if that is something you would prefer but myself am planning on sticking with the long tips. I like the way they look and function.

Just like with any tank that I receive, I break it down and give it a good cleaning with a little soap and hot water in case there is any residue left on the tank parts. You can see the build deck in the picture below which has some really good size phillips head screws. For once I won’t need a precision screwdriver to build on this one. Also the wick wells appear to be fairly large for an MTL tank. On the bottom left you can see the underside of the top cap which has a white gasket to help seal the top. The top cap is threaded and not the usual bayonet type we see on many tanks these days. The threads are very smooth. There are four honeycomb holes on each side of the post deck to help with preventing leaking and flooding. By using this design I suppose it slows down the flow of liquid. I’m not really sure what the red markings are on the silver one I received but that picture was taken before I cleaned the tanks and came off. You can barely see the gold plated 510 center pin protruding in the second picture.

The airflow control ring has four different sized holes available and does have a positive stop at either end. The four hole sizes are .8, 1.2, 1.4, and 1.6mm in diameter. I personally prefer a looser MTL so am fairly happy with the 1.6mm setting but could go for as much as a 2mm for my personal taste.

The top and bottom of the tank are a little larger than the diameter of the glass tank section. This is supposed to help keep from breaking the tank section in case the tank is dropped. I for one am going to take their word for it and don’t plan on doing drop tests to see if I can break the glass. Even though there are two tank sections included, there is not any spare glass included.

The build deck on the DR MTL RTA is really very easy to build on. On the gold one I used the included .7 ohm coil. The phillips head screws are pretty long and it took several turns to loosen it enough to slide the second coil leg under the screw after first inserting the other leg of the coil. I of course did a dry burn and wicked the coil with the included cotton thread. The thread is long enough that you could get three wicks out of it if you do it right. With the coil installed you want to cut the wick pretty short as the wick ports are very close by with the coil installed. I did a very slight comb out and inserted one side of the wick. I discovered that the other side was still too long so trimmed it before inserting it. From there it’s just a matter of soaking the wick and filling the tank. The phillips head screws are fairly large which makes it easy to use a good size screwdriver. Of course you don’t want to over torque the screws. I used the 4ml tank section on the gold version and found my sweet spot at 17.5 watts.

On the silver version I decided to use the 2ml tank section and used a 1.2 ohm MTL Clapton coil that I had a few packages of and hadn’t used before. I went through the same steps as above but found that I had most likely over stuffed the wick holes because the wick was not staying saturated and was getting some dry-ish puffs. With this coil if I went much above 15 watts then I started getting dry hits. I of course took the deck back off and replaced the wick paying closer attention to not stuffing the wick holes. With the new wick it worked properly. This was just a mistake on my part and these tanks really aren’t finicky.

FINAL THOUGHTS:

I was very pleased with the Dead Rabbit MTL RTA tanks during my time testing them. I did not experience any leaking or flooding. I used a NET tobacco recipe that I have used for some time and have used it many times for MTL reviews. The flavor and vapor production on both tanks was really very good but I felt like the gold version using the larger tank was slightly better. I would have thought that it would have been the opposite but that wasn’t the case for me. Maybe it was just that I liked the looks of the gold version better but I don’t think that’s the case.

If I could change anything about these tanks then the first thing would be to make the top cap a bayonet style quarter turn instead of threaded. I know it’s a small thing but many of us are spoiled and like our easy off top caps. This second thing is just a personal thing for me. I would have liked a larger airflow hole on the top end. I think a 2mm hole on the top end would have been closer to my liking of a loose MTL. However those that like a tight MTL should be pretty happy with the four hole options on these tanks.

Overall, I do very much like these tanks and would recommend them for MTL users if you don’t mind the screw on top cap. I would like to thank Hellvape and Lisha for sending the Hellvape Dead Rabbit MTL tanks for this review. It has been a pleasure being able to present more Hellvape tanks to you. I didn’t forget. Thanks a whole bunch to you the readers that make it to the end of my reviews. Below is a link to the Hellvape website for you.

Dead Rabbit MTL RTA-Hellvape - The DIY atomizer leading brand

Get ready for a vaping experience like no other with the Escobar Vape 6000 puffs. This disposable vape is designed to last and provides you with smooth, satisfying hits that will keep you coming back for more. With its compact and portable design, you can take the Escobar Vape with you wherever you go, making it the perfect choice for on-the-go vapers.

The Airis Dabble 2 in 1 is the ultimate dabbing experience. With its innovative design, variable voltages, and easy-to-use features, this vape is perfect for those who want to take their dabbing game to the next level. Try it today and experience the difference for yourself.

Lost Vape Ursa Pocket Pod Kit

Ursa Pocket Kit is a gaming pod device that comes with 3 different games like Virtual Pet/Slot Machine/Puff Count Competition. Featuring 3-inch back-lit panel with Retro X Cyber appearance, it is eye-catching and stylish. It has built-in 1200mAh battery with 30W max and a 1.7'' OLED screen. There are power on/off, manual fire, game-type fire button to bring you better vaping experience. It is compatible with Lost Vape Ursa Pod Cartridge, Lost Vape Ursa Empty Pod Cartridge and Lost Vape UB Mini Coil.

Details:
1. A full gaming pod device
2. Powered by Lost Vape Quest Chip
3. Built-in 1200mAh battery with Type-C charging
4. 30W max for upcoming new coils and carts
5. Designed with 1.7'' OLED display screen
6. Virtual Pet/Slot Machine/Puff Count Competition
7. Power on/off, manual fire, game-type fire button
8. 3-inch back-lit panel with Retro X Cyber appearance
9. Fit for Lost Vape Ursa Pod Cartridge and UB Mini Coil
10. 2.5ml capacity and easy side filling system
11. Short-circuit/Week battery/Over heat protection



GeekVape H45 Classic Kit

H45 Classic Kit combines silicon coating with smooth leather pieces to become light and portable. By utilizing the new tri-proof tech, ip68 rating water & dust resistance and a higher level of shock resistance, it can be better protected in harsher environments. It is powered by a built-in 1400mAh battery with 45W max and Type-C charging to bring you a long-lasting vaping experience. With the stable output buck boost tech, it can optimize power to ensure a consistent flavor. It is equipped with a top airflow leak-proof pod that features 4ml capacity, easy top filling and a visible window. It is compatible with GeekVape H45 Pod Cartridge and GeekVape B Series Coil. Just get it.

Details:
1. Powerful and robust, light and smooth
2. New Tri-proof design, IP68 rating
3. Built-in 1400mAh battery with 45W max
4. Stable output buck boost tech
5. Top airflow leak-proof design
6. Fit for H45 Cartridge and B Series Coil

Dear ECF Friends,


Thanks for your participating~
The VOOPOO DRAG M100S Kit giveaway has ended, please feel free to check the lucky winner below, congratulations!!



#206 @DmitryS

Please DM us below infos to get the prize shipped, thanks.

Name:
Add:
City:
State:
Post Code:
Country:
Tel:
Email address:

-------------------------------------------------------------------------------------------------------------------

It’s the 14th anniversary of HealthCabin. 14 years is a long journey, we appreciate your continuous supports to HealthCabin. We want to share the sweetness with you. Healthcabin is now holding our 14th Anniversary Sale promotion with 4 vape deals in total. Take the chance and enjoy quadruple save on your favorite devices!!

In addtion, our new round giveaway on ECF is ready!
We are now partnering with VOOPOO to giveaway the new released DRAG M100S Kit with 1 lucky winner. Ends on 16th May.

Feel free to check for more details below.


VOOPOO DRAG M100S Starter Kit, feature 5-100W output range, single 18650 or 2X700 battery layout, and is paired with the Uforce-L Tank. Constructed from durable zinc-alloy, the chassis of the Drag M100S delivers a visually striking and portable form-factor. Adopting a single battery layout, the Drag M100S can utilize 18650 or 21700 batteries, with the included adapter sleeve. In addition, the VOOPOO Drag M100S can call upon the PnP replacement coils to produce outstanding and exquisite flavor and vapor when installed within the 5.5mL UForce-L Tank. Futhermore, the VOOPOO Drag M100S is capable of Wattage, Smart, ECO, and TC Modes to reinforce its flexibility and adapts to the user's preferred vaping methods.





Do you wanna test it? Take the chance to join us and win it home for free.


How To Enter?
Word Chain Game - Take the last letter from the last post and post a new word(about vaping) begins with the taken letter.


Example:
VOOPOO
Oxva
Argus
...
So let's start with: Healthcabin


Note:
1. 1 lucky winner will be randomly selected by random.org on 17th May.
2. You must be over 21.
3. Number your entry, for instance: #Post 1, #Post 2...But No Continuous Posts at the same time.
4. Max 10 replies for each participant.


Good luck to you all!

Embark on a flavorful journey with our collection of Elf Bar Best Flavors BC5000. Savor the premium taste of these top-rated favorites that have captivated vapers around the world.

The VOOPOO Drag M100 S Kit is a high-performance vape kit that offers advanced features and a stylish design. It features single 18650/21700 battery compatibility, a 5-100W output range, and can accommodate 5.5ml of freebase and nic salt. The kit is available for all PnP-series coils, making it a versatile option for vapers of all levels.

Constructed from smooth zinc alloy, the kit is both durable and ergonomic. It is designed to withstand daily conditions and fit comfortably in your hand. The kit's Gene. TT 2.0 Chip is tailor-made for advanced vapers who are looking for precise control over their vaping experience. Bundled with a UFORCE-L tank, it is equipped with PnP-TW15 (0.15ohm) and PnP-TW20 (0.2ohm) coils for an exceptional vaping experience.

In addition, it is available in two material options: curved zinc alloy with darkwood or padauk, and curved zinc alloy with an AG matte finish. Its leakproof top airflow design ensures a smooth and consistent vaping experience without worrying about leaks.

In conclusion, the VOOPOO Drag M100 S Kit is a top-of-the-line vape kit that offers advanced features and a stylish design. The user-friendly dynamic switch allows for easy adjustments to settings, making it a top choice for those who demand high-performance vaping equipment. Please go to vape shop online to make an order.

You may also like:

Discover a wide variety of top-quality Hyde products at unbeatable prices in our Disposable Vape Clearance section. Don't miss out on these amazing deals, available only for a limited time!

Dive into paradise with the Pina Colada Hyde disposable vape. With its irresistible blend of pineapple and coconut, it's like sipping a tropical cocktail on a sunny beach. Experience the perfect balance of flavors in this rechargeable device that offers up to 4500 puffs.

Geekvape H45 Classic Kit is a durable pod mod kit designed for vapers who enjoy a high-quality vaping experience. This device features tri-proof technology, which means it is waterproof, dustproof, and shockproof, making it perfect for outdoor activities and adventurous vapers.

Comes with a 1400mAh built-in battery that provides a long-lasting vaping experience. It also has an output range of 5-45W, giving you the ability to customize your vaping experience to your desired wattage level. You can easily charge the device with the included Type-C charging port, ensuring a quick and efficient charging experience.

The h45 classic pod mod kit features a 0.96-inch TFT display screen that displays all the essential information you need, such as wattage level, battery life, and coil resistance. It also has a working mode of POWER/BYPASS, giving you the option to choose between power mode or bypass mode.

One of the standout features of the H45 Classic is its large top airflow system, which provides a smooth and consistent airflow. The device also has a magnetic connection, making it easy to remove and replace the pod when needed. The kit comes with a 510 drip tip and a spare MTL drip tip, giving you the option to choose your preferred vaping style. Perfectly compatible with 4ml geekvape h45 pod.

H45 Classic Kit is a great choice for vapers looking for a durable and reliable pod mod kit that provides a customizable vaping experience. And you can browse it at vapes online.

Here are more related vapes:
oxva xlim v2 pod kit hot sale
xros nano 3 price

Hello everyone,I'm from Dongguan,China. I hope to learn more knowledge about vape from this forum and have good time with you guys