Hello and welcome. I’m very happy to be back with you for another review for Hellvape. Hellvape has quickly become a favorite company of mine to do reviews for. This time I will be taking a look at the Hellvape Dead Rabbit MTL RTA. The DR MTL is 23mm in diameter and has a dual post build deck that accommodates a single coil build. It comes with a 2ml tank section pre-installed but also comes with an optional 4ml tank section. The DR MTL makes use of four independent airflow inlet holes and has honeycomb holes on both sides of the deck that are supposed to help prevent leaking and flooding. As far as I know, this is the first MTL RTA in the Dead Rabbit series of tanks. If these work as good as they look then they should be pretty darn good. Let’s find out.





WHAT’S IN THE BOX?

• 1 Dead Rabbit MTL RTA
• 1 Accessory Bag
• 1 4mL Glass and Long Chamber
• 1 Shoelace Cotton
• 1 0.7ohm Ni80 Clapton Coil
• 1 510 Drip Tip
• 1 User Manual

SPECIFICATIONS AND FEATURES:

• Diameter: 23mm
• Fill System: Threaded top cap
• Build Deck: Dual Post Build Deck
• Coil Configuration: Single Coil Configuration
• Coil Fastening: Top Secured via Phillips Screws
• Glass Capacity: 2mL/4mL
• Airflow: Single Airflow Inlet/ Four options
• Tank Material: Stainless Steel
• Drip Tip: 510 Drip Tip
• Connection: Thread 510
• Contact Pin: Gold Plated

INITIAL THOUGHTS:

The packaging for the Dead Rabbit MTL RTA is very familiar after having tested many Hellvape tanks. The Hellvape name is at the top of the front of the outer sleeve. The very large Dead Rabbit logo symbol is in the center with the Dead Rabbit MTL RTA name on the bottom. The back side of the sleeve gives a list of features and a list of the contents contained inside. Once the sleeve is removed then the familiar orange box is underneath.

I have to say once the orange box was opened and I could see the tank, I was very impressed with the appearance and simply love the drip tips that come pre-installed. They give the appearance of being made of stone but are not. The tips have a metal stepped structure to match the color of the body of the tank. As usual, Hellvape was very generous and sent the gold and silver versions of the tank for my review. I’m not usually a big fan of gold tanks but in this instance the gold is my favorite.

As you can see in the pictures below, there is a 2ml tank section installed on each tank but there is also a 4ml spare tank section included. I like that they made the effort to put the Dead Rabbit symbol on both tank sections. On the bottom right of the insert is a plain black delrin short drip tip if that is something you would prefer but myself am planning on sticking with the long tips. I like the way they look and function.

Just like with any tank that I receive, I break it down and give it a good cleaning with a little soap and hot water in case there is any residue left on the tank parts. You can see the build deck in the picture below which has some really good size phillips head screws. For once I won’t need a precision screwdriver to build on this one. Also the wick wells appear to be fairly large for an MTL tank. On the bottom left you can see the underside of the top cap which has a white gasket to help seal the top. The top cap is threaded and not the usual bayonet type we see on many tanks these days. The threads are very smooth. There are four honeycomb holes on each side of the post deck to help with preventing leaking and flooding. By using this design I suppose it slows down the flow of liquid. I’m not really sure what the red markings are on the silver one I received but that picture was taken before I cleaned the tanks and came off. You can barely see the gold plated 510 center pin protruding in the second picture.

The airflow control ring has four different sized holes available and does have a positive stop at either end. The four hole sizes are .8, 1.2, 1.4, and 1.6mm in diameter. I personally prefer a looser MTL so am fairly happy with the 1.6mm setting but could go for as much as a 2mm for my personal taste.

The top and bottom of the tank are a little larger than the diameter of the glass tank section. This is supposed to help keep from breaking the tank section in case the tank is dropped. I for one am going to take their word for it and don’t plan on doing drop tests to see if I can break the glass. Even though there are two tank sections included, there is not any spare glass included.

The build deck on the DR MTL RTA is really very easy to build on. On the gold one I used the included .7 ohm coil. The phillips head screws are pretty long and it took several turns to loosen it enough to slide the second coil leg under the screw after first inserting the other leg of the coil. I of course did a dry burn and wicked the coil with the included cotton thread. The thread is long enough that you could get three wicks out of it if you do it right. With the coil installed you want to cut the wick pretty short as the wick ports are very close by with the coil installed. I did a very slight comb out and inserted one side of the wick. I discovered that the other side was still too long so trimmed it before inserting it. From there it’s just a matter of soaking the wick and filling the tank. The phillips head screws are fairly large which makes it easy to use a good size screwdriver. Of course you don’t want to over torque the screws. I used the 4ml tank section on the gold version and found my sweet spot at 17.5 watts.

On the silver version I decided to use the 2ml tank section and used a 1.2 ohm MTL Clapton coil that I had a few packages of and hadn’t used before. I went through the same steps as above but found that I had most likely over stuffed the wick holes because the wick was not staying saturated and was getting some dry-ish puffs. With this coil if I went much above 15 watts then I started getting dry hits. I of course took the deck back off and replaced the wick paying closer attention to not stuffing the wick holes. With the new wick it worked properly. This was just a mistake on my part and these tanks really aren’t finicky.

FINAL THOUGHTS:

I was very pleased with the Dead Rabbit MTL RTA tanks during my time testing them. I did not experience any leaking or flooding. I used a NET tobacco recipe that I have used for some time and have used it many times for MTL reviews. The flavor and vapor production on both tanks was really very good but I felt like the gold version using the larger tank was slightly better. I would have thought that it would have been the opposite but that wasn’t the case for me. Maybe it was just that I liked the looks of the gold version better but I don’t think that’s the case.

If I could change anything about these tanks then the first thing would be to make the top cap a bayonet style quarter turn instead of threaded. I know it’s a small thing but many of us are spoiled and like our easy off top caps. This second thing is just a personal thing for me. I would have liked a larger airflow hole on the top end. I think a 2mm hole on the top end would have been closer to my liking of a loose MTL. However those that like a tight MTL should be pretty happy with the four hole options on these tanks.

Overall, I do very much like these tanks and would recommend them for MTL users if you don’t mind the screw on top cap. I would like to thank Hellvape and Lisha for sending the Hellvape Dead Rabbit MTL tanks for this review. It has been a pleasure being able to present more Hellvape tanks to you. I didn’t forget. Thanks a whole bunch to you the readers that make it to the end of my reviews. Below is a link to the Hellvape website for you.

Dead Rabbit MTL RTA-Hellvape - The DIY atomizer leading brand

Get ready for a vaping experience like no other with the Escobar Vape 6000 puffs. This disposable vape is designed to last and provides you with smooth, satisfying hits that will keep you coming back for more. With its compact and portable design, you can take the Escobar Vape with you wherever you go, making it the perfect choice for on-the-go vapers.

The Airis Dabble 2 in 1 is the ultimate dabbing experience. With its innovative design, variable voltages, and easy-to-use features, this vape is perfect for those who want to take their dabbing game to the next level. Try it today and experience the difference for yourself.

Lost Vape Ursa Pocket Pod Kit

Ursa Pocket Kit is a gaming pod device that comes with 3 different games like Virtual Pet/Slot Machine/Puff Count Competition. Featuring 3-inch back-lit panel with Retro X Cyber appearance, it is eye-catching and stylish. It has built-in 1200mAh battery with 30W max and a 1.7'' OLED screen. There are power on/off, manual fire, game-type fire button to bring you better vaping experience. It is compatible with Lost Vape Ursa Pod Cartridge, Lost Vape Ursa Empty Pod Cartridge and Lost Vape UB Mini Coil.

Details:
1. A full gaming pod device
2. Powered by Lost Vape Quest Chip
3. Built-in 1200mAh battery with Type-C charging
4. 30W max for upcoming new coils and carts
5. Designed with 1.7'' OLED display screen
6. Virtual Pet/Slot Machine/Puff Count Competition
7. Power on/off, manual fire, game-type fire button
8. 3-inch back-lit panel with Retro X Cyber appearance
9. Fit for Lost Vape Ursa Pod Cartridge and UB Mini Coil
10. 2.5ml capacity and easy side filling system
11. Short-circuit/Week battery/Over heat protection



GeekVape H45 Classic Kit

H45 Classic Kit combines silicon coating with smooth leather pieces to become light and portable. By utilizing the new tri-proof tech, ip68 rating water & dust resistance and a higher level of shock resistance, it can be better protected in harsher environments. It is powered by a built-in 1400mAh battery with 45W max and Type-C charging to bring you a long-lasting vaping experience. With the stable output buck boost tech, it can optimize power to ensure a consistent flavor. It is equipped with a top airflow leak-proof pod that features 4ml capacity, easy top filling and a visible window. It is compatible with GeekVape H45 Pod Cartridge and GeekVape B Series Coil. Just get it.

Details:
1. Powerful and robust, light and smooth
2. New Tri-proof design, IP68 rating
3. Built-in 1400mAh battery with 45W max
4. Stable output buck boost tech
5. Top airflow leak-proof design
6. Fit for H45 Cartridge and B Series Coil

Dear ECF Friends,


Thanks for your participating~
The VOOPOO DRAG M100S Kit giveaway has ended, please feel free to check the lucky winner below, congratulations!!



#206 @DmitryS

Please DM us below infos to get the prize shipped, thanks.

Name:
Add:
City:
State:
Post Code:
Country:
Tel:
Email address:

-------------------------------------------------------------------------------------------------------------------

It’s the 14th anniversary of HealthCabin. 14 years is a long journey, we appreciate your continuous supports to HealthCabin. We want to share the sweetness with you. Healthcabin is now holding our 14th Anniversary Sale promotion with 4 vape deals in total. Take the chance and enjoy quadruple save on your favorite devices!!

In addtion, our new round giveaway on ECF is ready!
We are now partnering with VOOPOO to giveaway the new released DRAG M100S Kit with 1 lucky winner. Ends on 16th May.

Feel free to check for more details below.


VOOPOO DRAG M100S Starter Kit, feature 5-100W output range, single 18650 or 2X700 battery layout, and is paired with the Uforce-L Tank. Constructed from durable zinc-alloy, the chassis of the Drag M100S delivers a visually striking and portable form-factor. Adopting a single battery layout, the Drag M100S can utilize 18650 or 21700 batteries, with the included adapter sleeve. In addition, the VOOPOO Drag M100S can call upon the PnP replacement coils to produce outstanding and exquisite flavor and vapor when installed within the 5.5mL UForce-L Tank. Futhermore, the VOOPOO Drag M100S is capable of Wattage, Smart, ECO, and TC Modes to reinforce its flexibility and adapts to the user's preferred vaping methods.





Do you wanna test it? Take the chance to join us and win it home for free.


How To Enter?
Word Chain Game - Take the last letter from the last post and post a new word(about vaping) begins with the taken letter.


Example:
VOOPOO
Oxva
Argus
...
So let's start with: Healthcabin


Note:
1. 1 lucky winner will be randomly selected by random.org on 17th May.
2. You must be over 21.
3. Number your entry, for instance: #Post 1, #Post 2...But No Continuous Posts at the same time.
4. Max 10 replies for each participant.


Good luck to you all!

Embark on a flavorful journey with our collection of Elf Bar Best Flavors BC5000. Savor the premium taste of these top-rated favorites that have captivated vapers around the world.

The VOOPOO Drag M100 S Kit is a high-performance vape kit that offers advanced features and a stylish design. It features single 18650/21700 battery compatibility, a 5-100W output range, and can accommodate 5.5ml of freebase and nic salt. The kit is available for all PnP-series coils, making it a versatile option for vapers of all levels.

Constructed from smooth zinc alloy, the kit is both durable and ergonomic. It is designed to withstand daily conditions and fit comfortably in your hand. The kit's Gene. TT 2.0 Chip is tailor-made for advanced vapers who are looking for precise control over their vaping experience. Bundled with a UFORCE-L tank, it is equipped with PnP-TW15 (0.15ohm) and PnP-TW20 (0.2ohm) coils for an exceptional vaping experience.

In addition, it is available in two material options: curved zinc alloy with darkwood or padauk, and curved zinc alloy with an AG matte finish. Its leakproof top airflow design ensures a smooth and consistent vaping experience without worrying about leaks.

In conclusion, the VOOPOO Drag M100 S Kit is a top-of-the-line vape kit that offers advanced features and a stylish design. The user-friendly dynamic switch allows for easy adjustments to settings, making it a top choice for those who demand high-performance vaping equipment. Please go to vape shop online to make an order.

You may also like:

Discover a wide variety of top-quality Hyde products at unbeatable prices in our Disposable Vape Clearance section. Don't miss out on these amazing deals, available only for a limited time!

Dive into paradise with the Pina Colada Hyde disposable vape. With its irresistible blend of pineapple and coconut, it's like sipping a tropical cocktail on a sunny beach. Experience the perfect balance of flavors in this rechargeable device that offers up to 4500 puffs.

Geekvape H45 Classic Kit is a durable pod mod kit designed for vapers who enjoy a high-quality vaping experience. This device features tri-proof technology, which means it is waterproof, dustproof, and shockproof, making it perfect for outdoor activities and adventurous vapers.

Comes with a 1400mAh built-in battery that provides a long-lasting vaping experience. It also has an output range of 5-45W, giving you the ability to customize your vaping experience to your desired wattage level. You can easily charge the device with the included Type-C charging port, ensuring a quick and efficient charging experience.

The h45 classic pod mod kit features a 0.96-inch TFT display screen that displays all the essential information you need, such as wattage level, battery life, and coil resistance. It also has a working mode of POWER/BYPASS, giving you the option to choose between power mode or bypass mode.

One of the standout features of the H45 Classic is its large top airflow system, which provides a smooth and consistent airflow. The device also has a magnetic connection, making it easy to remove and replace the pod when needed. The kit comes with a 510 drip tip and a spare MTL drip tip, giving you the option to choose your preferred vaping style. Perfectly compatible with 4ml geekvape h45 pod.

H45 Classic Kit is a great choice for vapers looking for a durable and reliable pod mod kit that provides a customizable vaping experience. And you can browse it at vapes online.

Here are more related vapes:
oxva xlim v2 pod kit hot sale
xros nano 3 price

Hello everyone,I'm from Dongguan,China. I hope to learn more knowledge about vape from this forum and have good time with you guys

So after reaching out to Lost Vape 3 weeks ago regarding my Cyborg Quest which started to fail after 4 months Lost vape offered a Centaurus M200 as a replacement and i happily agreed to it. Today I received the M200 and it's nice! Battery life feels 25% longer on the M200 vs The Cyborg Quest.
So overall really happy with Lost Vape and their warranty, would recommend.

Also picked up some Mr Freeze eliquids. Which I highly enjoy.

PS does anyone know how to change the screen Color on the Mod?

Hi, today let's take a look at the DRAG M100S Kit kindly sent to me for this review by VooPoo. In this Test I will examine each of the characteristics that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► VooPooa DRAG M100S Kit; Before starting, let's see together some special features indicated by the manufacturer:
• 1. Maximum power of 100W
• 2. UFORCE-L leak-proof tank with top airflow
• 3. PnP Dual in One technology
• 4. Intuitive dynamic switch
• 5. Single 18650/21700 battery (not included)
• 6. GENE. TT 2.0 chip
• 7. Soft as touching flowing water
• 8. Compatible with PnP Coils



► VooPooa DRAG M100S Kit; Packaging:
The packaging recalls the color of the kit it contains. On the front part there is a window with a view of the product, and there are also the following writings; VOOPOO, DRAG M100S, Gene TT Chip Inside. On the back you can view; the contents, Shenzhen Woody Vapes Technology Co., Ltd. (VooPoo) address, scratch & check, trademarks & logos, warnings, barcode and "sample" label to specify the destination of this item to promoters and reviewers. On the remaining sides of the package you can view in the form of icons; the main features and the various QR-Codes. This pack of VooPoo features a new type of opening. In fact, to be able to remove the internal drawer and access the entire contents of this kit, you need to tear off the pre-cut tab on the bottom of the box.





► VooPooa DRAG M100S Kit; Packing List:
• 1 DRAG M100S
• 1 UFORCE-L TANK
• 1 Spare convex glass
• 1 Coils PnP 0.2Ω Max 55W
• 1 Coils PnP 0.15Ω Max 70W
• 1 Type C charging cable
• 1 Bag of spare o'rings
• 1 warning card
• 1 User Manual



► VooPooa DRAG M100S Kit; Specifications:
• Material: Zinc Alloy + Stainless Steel
• Dimensions: 90x36x30mm
• Battery: 18650/21700
• Maximum output voltage: 8V
• Power range: 5-100W
• Charging voltage: 5V/2A
• Resistance range: 0.05-3.0Ω
• Tank capacity: 5.5ml
• Compatible with PnP Coils platform



► VooPooa DRAG M100S Kit; Matte Finish Series:
• Silver & Black
• Red & Black
• Cyan & Blue
• Pearl White



► VooPooa DRAG M100S Kit; Wood Finish Series:
• Black & Darkwood
• Antique Brass & Rosewood



► VooPooa DRAG M100S Kit; First Impressions:
The new DRAG M100S is really very beautiful with its handcrafted design, also considering that it can accommodate a large 21700 battery; the mod is also quite small in size. The working device undergoes 800℃ hot forging process and 8 different nanoscale polishing processes
to fit perfectly in the palm of your hand. The edges are beautifully rounded for an excellent feeling. For the construction, decorations in solid wood were used (depending on the version), or precious plays of light and shadow on the polished metal surfaces on which fingerprints seem not to take hold. The upper vents of the UFORCE-L TANK ensure that the pressure inside the tank is well balanced by coordinating the airflow directions and improving the fluidity of the puffs. Condensate can be held in the depths of the lower deck and with no escape space. Furthermore, the "Dual in One" PnP coils offer a good improvement in atomization efficiency with rich flavor and large vapor clouds. UFORCE-L is currently quite possibly the best sub-ohm tank available on the market today and DRAG M100S seems to be truly the single battery version of the amazing DRAG 4 dual battery.



► VooPooa DRAG M100S Kit; 18650/21700 batteries:
On the bottom of the Mod you can read the wording "Designed By VooPoo", furthermore the flap has the opening system that I prefer to insert a cell. In fact, just press the right angle of the semicircle forward and the opening is immediate. You can use a 18650 cell with the reducer, or a large 21700 without the reducer. The closure of the flap is precise, safe and stable.



The steel top plate, houses a spring loaded pin in the center, on the perimeter of the plate there are the words "Drag" and "Spark Your Life". DRAG M100S is able to accommodate rather large tanks (up to 30mm) without external protrusions.



► VooPooa DRAG M100S Kit; Top finishes and decorations:
VooPoo sent me two different colors for this test; one belongs to the "Matte Finish Series" line in Silver & Black color, its appearance varies according to the light point, it is very bright but can become dark thanks to the "black" shades that are expertly disseminated on its body, moreover the geometric facets amplify the angular three-dimensional effect, while maintaining an extremely smooth surface finish. On such a shiny metal body I would have expected large fingerprints, but after use there is no trace of fingerprints. This was a beautiful surprise! The other specimen that VooPoo sent me belongs to the "Wood Finish Series" line and is in a fantastic retro "Antique Brass & Padauk" coloration, the Padauk wood has a special finish that appears almost soft to the touch creating a pleasant sensation, really amazing. Padauk wood goes perfectly with antique brass which generates incredible brushed bronze reflections, this version is a true work of art to my taste. The decorative lettering is kept to a minimum and is limited to "DRAG M110" "Gene TT" on one side and "VooPoo" on the other side.



The back (handle) has a vertical relief plate which is arranged on the central axis. On the front side, at the top is the small, round-shaped Fire key which is concave towards the center. Below the key we find the display that allows you to select the following background colors; green, pink, purple and yellow. The usb type-c port is equipped with the classic 5V/2A, I remember that the 5V/3A fast charging protocol was present on DRAG 4 instead. The new layout in the TC mode accurately identifies the four commonly used heating wire materials; Ni200, Tl, SS316 and SS43. So you can adjust the temperature in the recommended range for each material. The entire display layout has been updated and shows the following information; wattage setting, mode, battery charge indicator with percentage, voltage output, coil resistance, puff counter, last puff duration. Acting on the SWITCH mode you can decide how to operate the third button (Dynamic Switch). By default the third button (Dynamic Switch) locks/unlocks the power, but can be toggled to turn the device on or off or to lock/unlock the selected power.



* Through the combination of the keys you can enter the Mod parameters as follows;
• Press the Fire button 5 times to turn on/off the device
• Press the + and - buttons at the same time to access the menu. Use the + and - buttons to cycle through the various options and press the Fire button to confirm
• The modes in the menu available are; Smart, RBA, ECO and TC.
• Smart mode allows the chipset to identify the resistive value of the coil and to set the right power value and prevents too high power selections.
• RBA mode is essentially a standard variable wattage mode for those using RTA or RDA alternative tanks with various builds. The adjustment can be made between 5 and 100W using a 21700 cell or between 5 and 80W using a 18650 cell.
• In addition to the already mentioned temperature and variable power settings, there is the ECO mode which allows you to save energy by turning off the screen when the battery voltage drops below 20%.
• In addition, the chipset allows you to reset the number of puffs and view the installed firmware version



► VooPooa DRAG M100S Kit; U-Force-L Tank:
This tank can be easily disassembled for cleaning operations and the package is particularly rich in spare silicone gaskets and o-rings.
The construction material used is Stainless Steel + Pyrex. The weight of this robust tank is 90g. U-Force-L Tank is the first VooPoo Sub-ohm Tank equipped with "Top AFC", it is a particular construction type which, compared to the classic "Bottom AFC" arrangement, is able to eliminate any loss of e-liquid.



VooPoo (cleverly) made the 810 housing featured in the top cap "standard", this solution allows you to use any 810 Drip Tip equipped with one or two silicone rings. The original Drip Tip has two silicone rings that offer an excellent grip, the extraction hole at the base is 7mm wide then the chimney gradually widens upwards to end with a 10mm diameter at the top. The top cap has a finely knurled perimeter for better finger grip. In fact, with the classic bayonet system, 1/2 a turn is enough to extract the cap and proceed with filling the tank. There are two filling slots with elastic holes to allow the insertion of even quite wide tips that are present on the various e-liquid dispensers. In the side-by-side image you can see the large silicone gasket removed from its housing, you can see the shape of the gasket and the protuberance that is inserted into the single blind hole around the filling slots. You can also see the "bayonet" system for opening the top cap.



You can rotate the AFC ring on the top of the atomizer clockwise or counterclockwise to adjust the airflow as you like. The three large vents are connected like a funnel to channel and compress the air from top to bottom. In the lower part of the central structure, the three air intakes wrap around the coil at 360°, feeding it in a large and uniform way. In addition, the hollow structure in the central part absorbs the noise generated by the airflow to allow you to enjoy your vape silently and without annoying whistling. Above the oring for the pyrex glass seal, there are 3 large windows for the passage of the e-liquid towards the coil, these windows are carefully flared on the edges. In the side-by-side image I tried to show you the 3-headed dog logo (maybe 3-headed wolf) that VooPoo laser engraved in the center of the supporting structure.



By unscrewing the base you can insert the coils by pressing them from the bottom up. The base design mimics a heat sink to speed up the cooling of the tank. The base joins the central structure via a sliding thread. Between the base and the central structure there is a silicone o-ring for a perfect seal. The base is quite deep to contain any condensation without giving it an escape route. In the center are the gold plated contact pins for better electrical conductivity to be transferred to the coil. On the bottom of the base are; the inscription "VOOPOO", the inscription "Designed By VOOPOO", the CE mark, the disposal logo. The Thread contains a gold-plated and slightly protruding fixed pin.



► VooPoo DRAG M100S Kit; PnP Coils:
As we all know, the PnP coil platform is particularly broad, and also includes an RBA base. So you can use various PnP coils according to your needs, moreover you will not have difficulty finding PnP coils on the market as they are very popular and highly appreciated by enthusiasts. For this new tank, VooPoo has included a 0.2Ω PnP-TW20 Coil with 40-55W range and 1 0.15Ω Pnp-TW15 Coil with 55-70W range. These are two of the new TW series PNP coils that can be recognized by the presence of a purple o-ring, while the previous VM series PnP coils have a red o-ring. According to VooPoo the new TW series PnP coils use the new dual-in-one technology for pure taste, thick clouds and 25% longer life.



► VooPoo DRAG M100S Kit; Vape test and final conclusions:
For this Test I used TNT Good Posion aroma diluted 10% with VG/PG 70:30 and boost 3mg/ml.

• Coil PnP-TW20 0.20Ω 40-55W:
With this coil the Mod in SMART mode automatically set 50W of power, however being the coil new I started with 40W and then gradually increased with the power. With 40W of power the coil fires up quickly, however the flavor is bland even with the airflow half-closed, so I jumped straight up to 50W and the flavor improved noticeably with good release of thick vapor clouds. I also tested the physical limit of the coil which is 55W, obtaining excellent performance, however with a view to saving energy, I preferred to position myself permanently at 50W and then start testing the air control. With the three airflow slots fully open there is almost no resistance on the inhale, however the flavor is not as diluted as one would expect, by closing the afc to 50% the restriction on the airflow is pretty ineffective, so I found my sweet spot by setting the airflow open about 1/3.

• Coil Pnp-TW15 0.15Ω 55-70W:
With this coil the Mod in SMART mode automatically set 65W of power, however being the coil new I started with 55W and then gradually increased with the power. With 55W of power the coil activates quickly, the flavor is good, the vapor is slightly too humid, switching to 60W the flavor increases and the nebulization improves making the vapor hotter and more consistent. I went up to 70W and with the airflow wide open the flavor is at peak output with embarrassing dense cloud production. So I started to adjust the airflow by opening it to 50%, again I noticed little restriction of the flow, however this coil is capable of absorbing a lot of air and one can turn a blind eye to this AFC system which is not in capable of restricting the air passage in a linear way. My favorite coil is this one because it offers a more concentrated flavor with a truly wild power delivery. However both of these new TW series PnP resistors with dual-in-one technology performed well and deliver what they promise.

Regarding the Mod DRAG M100S there is little to say it is beautiful and impressed me with the very high level of finishes and decorations. Its performance is explosive with lightning-fast activation and a truly substantial power boost, the various modes and adjustments that the Mod offers are able to satisfy anyone. The QS multifunction switch, depending on your preferences can block the power and allows you to vape without running the risk of inadvertently raising or lowering the power. Plus you can adjust the QS key to completely lock the Mod, or to turn the Mod on or off! This QS key which was introduced for the first time on DRAG 4 is really very comfortable, and it is what I finally expected on a real Drag. Thanks VooPoo. Furthermore, the ECO function respects the parameters and starts working exactly when the cell charge level reaches 20%. Built-in Boost allows step-up even at low battery levels. Last but not least, the device integrates all the necessary safety functions. I really want to give VooPoo a round of applause for making this super eye-catching kit! I think all flavor-loving vapers should own one.

• Thank you for reading.

• Thank you VooPoo for sending me DRAG M100S Kit for review.

Atmizoo announced their SteamShell RBA last week in their +21 FB group and formally introduced it at the Hall of Vape Stuttgart (this past weekend).

It's supposed to go on-sale in the next 15-20 days. Full details can be found on Atmizoo's SteamShell blog entry.



78€ for deluxe edition (pictured) and 58€ for the basic edition.

---

SvoëMesto announced their RBA earlier today. No details yet.

BUY NOW! Vaporesso XROS 3 Nano Kit

Specification:

• Size: 14 x 51.2x 69.9 mm
• Capacity: 2ml
• Resistance: 0.6/0.8Ω
• Battery: 1000mAh
• Output Power:11W/16W

Mother's Day Sale is Live Now!!!!!!!!!!!
USE COUPON CODE (MOM) TO GRAB 15% DISCOUNT STOREWIDE TILL 14th May, 2023

Location:US-MO

Item name: Doom RTA + 7 mesh coils and shoelace cotton
Price: $25 shipped
Condition:8/10 Used good shape
Comments: Gunmetal
Link to Photos: Login to view embedded media
Item name: Jac Vapour Series-B DNA 75 mod
Price: $55 shipped
Condition: 9/10
Comments: Silver 25mm
Link to Photos: Login to view embedded media
Item name: Evic Primo Mini
Price: $25 shipped
Condition: 9/10
Comments: Blue
Link to Photos: Login to view embedded media
Item name: Geek Vape Solo
Price: $25 shipped each or $45 shipped for both
Condition: 8/10 Used good shape
Comments: 1 is red and the other is blue
Link to Photos: Login to view embedded media
Item name: Aspire SkyStar Revvo Kit ***SOLD***
Price: $25 shipped each or $40 shipped for both
Condition: 9/10 mods used for a few days and put back in box. 10/10 tanks never used.
Comments: 1 is white and the other is black
Link to Photos: Login to view embedded media
Item name: Adept Mod and 2 - Zlide tanks
Price: $30 shipped for all
Condition: 8/10 Used good shape
Comments: Mod - camo tanks- 1- black 1- silver
Link to Photos: https://i.imgur.com/d6wBkG7.jpg

Item name: 2 - Zenith tanks ***SOLD***
Price: ***SOLD***
Condition: 10/10 brand new in box
Comments: 1 - blue 1 - silver
Link to Photos: https://i.imgur.com/d6wBkG7.jpg (edited)

I really like these sadboy iced fruitline flavors. But it's like it's ruined me, I can't seem to find other fruit flavors that taste good. Like the punch berry, it tastes more like a pink lemonade but without overpowering lemon. The rainbow blood one is like guava candy but with some other flavors I can't describe. They're both very sweet.

See, I tried coastal clouds iced passion fruit orange guava and the mf smells like prescription nasal spray and tastes kinda funky, not fruity, sort of, but more like flowers with some weird taste? Lol. The juice monster ones taste too fake, the candy ones are way too sweet and also taste pretty artificial.

I do really like this one I picked up called propaganda - illuminati. I can do this one even tho it's not menthol I like it. I keep getting tempted to mix it with the sadboy punch berry to bring out more of the flavor though.

I don't find the dessert flavors to sound very appealing, don't really wanna puff strawberry cheesecake. The creme fruits sounded interesting but I really like menthol fruit flavors. Most of the fruits I've tried are just bad though.

What's some weird named flavors that don't say what they are but just surprise you?

Or, should I make my own, and if so who should I buy the flavors from?

Hey guys

I was using a mech for about 2 weeks and it got patina pretty badly so i decided to polish it with copper polish,
I know for the outer body its ok to use polish after googling it but i cant find anything about the contacts it self
Most people say use eraser or alchole but since its copper i can use copper polish right?
I just cleaned the entire mod contacts and all with the polish just hope its ok
So i can do it next time too
It looks almost new and my contacts are super shiny too...

I tried googling it but cant rly find anyone using polish on the contacts thats why im worried now dont wanna ruin it..

Also i got copper polish my contacts are copper but the body is brass i guess copper polish works for brass too cause it worked lol,just hope i didnt screw up the contacts part

Hello, it’s good to be back with you for another review after having had a couple of weeks off with no reviews to work on. This time I will be taking a look at the Okino C100 which is powered by Innokin technology. The C100 has an 800mah internal battery along with a 4ml pod that uses the OK series replaceable coils. The body is made of a lightweight material to help make it more portable and is available in eleven different colors. It comes with a .4ohm coil and is designed to be an RDL device. There is an optional .6 ohm coil available for purchase separately. The C100 does not have an adjustable airflow control and relies instead on the different coils to regulate the amount of airflow. I don’t know about you but I’m really curious about this one so let’s get to it and I’ll give my thoughts on it.





WHAT’S IN THE BOX?

• 1 OKINO C100 Mod
• 1 4mL Cartridge
• 1 0.4ohm OK R2 Coil
• 1 Oil Absorbent Cotton
• 1 Vape Band

SPECIFICATIONS AND FEATURES:

• Dimensions: 104mm by 25mm Diameter
• Battery Capacity: 800mAh
• Voltage Range: Direct Battery Voltage Output
• Resistance Range: 0.3-3.5ohms
• Chassis Material: Lightweight Chassis
• Operation: Button-Activated
• Connection: Magnetic Pod Connection
• LED Indicator Light
• Vaping Overtime Protection
• Short-Circuit Protection
• Overheat Protection
• Coil Resistance Protection
• Pod Capacity: 4mL
• Fill System: Side Fill - Silicone Stoppered
• Coil Support: OK Coil Series
• 0.4ohm R2 Coil
• Coil Installation: Press Fit
• Charging: Type-C Port

STRUCTURE:

INITIAL THOUGHTS:

After having reviewed so many different pod devices it was honestly a little hard to get excited about the latest one. So many times pods are so similar that it kind of seems like the ground hog day movie where the guy wakes up each morning and does the same thing. I have to say that from the first puff I was very pleasantly surprised by the Okino C100. I’ll talk more about that later but first I’ll show you the box and what the device and pod look like. Innokin was nice enough to provide a red and a black version along with some extra coils so I will be able to give my thoughts on the .6 ohm OK coil as well as the .4 ohm OK coil that is included at the end of this review. Of course I feel like there should have been one of each included in the package. I fail to understand why companies include lanyards but not a second coil. This once comes with a lanyard ring but no lanyard.

On the front of the box is the Okino and C100 names in large print as well as the color version included in the box. The back side gives the company information and a warning. The sides of the box show a color picture of the device and the available coils on one side. The opposite side shows the contents list and the color version in smaller print near the bottom. The box opens from the end and there is a flap inside with a hole in the center that holds the C100 in place. It makes it a little awkward when trying to remove the device from the box.

The Okino C100 isn’t much bigger than a 21700 battery. It has an 800mah internal battery which I thought might have been bigger due to the diameter of it. The front of the C100 has the fire button and the letters OK for Okino printed on it. The back side of the C100 has the USB-C charging port which if I remember correctly is rated at 650mah/5V which will make a full charge take over an hour. The Okino name is printed on the back side also near the bottom. I don’t know if you can tell from the pictures below but the pod is not a super tight fit. You can grab the duck bill mouth piece and wiggle the pod back and forth a little.

The white circle around the bottom of the C100 is lighted when you plug it in to charge or when you take a puff. It indicates the battery level. If you’re a fan of flashing lights on your vaporizer then you can press the fire button twice to make the lights flash continuously. Two more presses turns it off and it will only light during operation or charging. This one is made by Innokin so it makes sense that it takes three presses of the fire button to turn it on or off. The specifications in the user manual say that the charging rate is 1A but to me it seems like a long time from when it’s completely dead to fully charged. Since I had two for the review, I didn’t time how long it took to charge fully but it definitely took over an hour to charge the 800mah battery. The light will be red in color until it gets to 90% charged and then will turn blue until it’s fully charged and the light will turn off.

The battery level is indicated by the lighted ring around the base. The battery level indications are as follows.

• Red = less than 10%
• Yellow = 10-30%
• Blue = greater than 30%

The C100 does have some safety warnings built in even though it doesn’t have a display. They are indicated by the following light sequences.

• Timeout: Light flashes 10 times
• Short Circuit: Red light stays on for 5 seconds
• Overheat: Red light flashes 3 times + 3 times
• Low/High Coil Resistance: Red light stays on for 5 seconds and blue light flashes 5 times

The pod opening on the C100 has the standard two spring loaded contacts to make connection with the coil in the pod and two magnets. What is different about this one is that there is an absorbant white pad in the bottom to protect the device from liquid leakage or condensation. As you can see in the picture below I did get some condensation. The pad does have a sticky back so a pair of tweezers is handy to remove it. There are five of these pads included with the device. At this point I don’t know if additional pads can be ordered.

The pod comes with the .4 ohm OK coil pre-installed but there is a sticker on the bottom to prevent accidental firing before filling the pod. The pod holds 4ml of liquid which is really nice. The pod is side filled after pulling the rubber plug. The plug feels well made and is easily rotated out of the way for filling. The fill hole is large enough to allow most bottles to be used.

The bottom of the pod has two magnets to help hold it in place but when the pod is in the C100 then there is some back and forth wiggle. The coils are pushed in and the slots cut out in the bottom of the coils should be aligned with the magnets. As I mentioned earlier, it only comes with the one coil which is .4 ohms and rated at 22.5 watts despite there being no way to adjust the output. The optional .6 ohm coils are rated at 18 watts. It’s nice that the .4 ohm coils have pink o rings while the .6 ohm coils have blue o rings which makes it very easy to tell which coil resistance you are installing.

FINAL THOUGHTS:

From the first puff with the .4 ohm coil, I was impressed with the C100. I very much like the size and performance it. I like that it can be button fired or used as auto draw. I did feel like the power was slightly stronger when button firing compared to auto draw but it could have been just me. This one has the best auto draw operation out of any device I’ve tried that was a true RDL device. I haven’t tried a lot but have tried a few and unless the airflow was tightened on them then operation was intermittent.

I personally don’t like flashing lights on my mods but if you do then this one does have that feature. Also I’m not a lanyard user but a lanyard ring is included with the C100 if that is something you like. I feel like they could have made the ring around the fire button as the battery indicator instead of the large ring on the base.

First I tested the .4 ohm coil on the black C100. I used Dinner Lady Blackberry Crumble. I thought the flavor production was very good and actually picked up on a flavor or two that I hadn’t been tasting while using it in a tank on a mod. The vapor production was abundant and the airflow was a very good fit for my style of RDL vaping. I was able to get through about an entire 4ml of liquid with a single charge. It almost seemed to me like there was more than the rated 800mah battery.

I installed one of the optional .6 ohm coils in the red version with a DIY Ry4 cream recipe that I have used a lot. I could only slightly tell the difference in airflow and output. The flavor on this coil was also very good and plenty of vapor was produced.

I would like to thank Innokin and Alisa for sending the two Okino C100 kits and the two boxes of spare coils for this review. As always, thank you to the readers. Below is a link to the website for your viewing pleasure.

Homepage - OKINOLABS

Experience the ultimate vaping pleasure with Esco Bar Mega White Mystery. With its 5000 puffs, this rechargeable vaping device is perfect for those who love to indulge in a long-lasting vaping experience. Its sleek design and the tantalizing white mystery flavor make it an instant hit among vaping enthusiasts. Get your hands on the Mega Esco Bars today!

Curious how long everyone’s been vaping? And do you plan to keep vaping or quit at some point?

It’s the 14th anniversary of HealthCabin, and we want to share the sweetness with you. 14 years is a long journey, we appreciate your continuous supports to HealthCabin. To celebrate this big day, we are now partnering with UWELL & VAPORESSO to giveaway the new Caliburn A3S Kit & LUXE XR Max Kit with 40 winners in total. Ends on 21st May. Wanna test them for free? Take the chance to join us and win them home!

Prizes:

• UWELL Caliburn A3S Pod Kit – 20 Winners
• VAPORESSO LUXE XR Max Pod Kit – 20 Winners

*If you are luckly to win, you will get one of the prizes randomly.

About UWELL Caliburn A3S Pod Kit​

The CALIBURN A3S (please login to view this product) is easy to operate. Built-in 520mAh Battery, hold 2ml ejuice capacity with the side filling syetem, Without any button designed, the device is draw-activated, which is very friendly to vape beginners who pursue simplicity. With laser pattern finely printed on the smooth aluminum alloy device, it looks sleek and exquisite. During vaping, the logo-shape animated light matrix will flash. In your video, you can stress the simple and elegant design of the device.

About VAPORESSO LUXE XR Max Pod Kit​

Vaporesso LUXE XR Max Kit which innovative COREX heating technology, Luxe XR Max Kit power by built-in a 2800mAh battery with Max 80W output and Type-C charging. Supported by the COREX heating technology and AXON Chip, it can ensures faster heating, boosted flavor and bigger clouds. It adopts the 0.4ohm/0.2ohm Mesh LUXE X Pods with customized drip tips for MTL/DL experience. You can easily switch the pod to adjust the airflow from MTL to DTL. Its slim & crystal clear body with 3 layers of coating is durable enough to resist daily abrasion & dropping. Moreover, its auto lock function will lock the device after 8S pressing and secured mode to protect from accidentally misfiring.

Join & Win​

Finish the tasks below to win UWELL Caliburn A3S Pod Kit & VAPORESSO LUXE XR Max Pod Kit home easily. Good luck to you all!!

If you cannot load the contest table below, please click here to join.