Bonjour,
Je m'appelle Olivier, je suis vapoteur depuis 2015 et j'aime beaucoup aider mes amis à passer de la clope à la vape. J'espère pouvoir aider quelques personnes sur se forum.
Si vous avez besoin d'aide, n'hésitez pas à m'écrire.
Merci

I got this nifty little pod kit to review and i gotta say its small but mighty. Slightly smaller than the Freemax Galex Nano in fact. It has a draw detector that determines whether to produce MTL or DTL vapor based on how you inhale. It comes with a lanyard hole and a lanyard included which is nice and was very much appreciated since the Galex Nano doesnt come with it.

Device:

Name: ARGUS P1

Material: Zinc Alloy+PC

Battery: 800mAh

Output Power: 5-20W

Output Voltage: 3.2-4.2V

Resistance: 0.5-3.0Ω

Battery Capacity: 800mAh Built-in Battery

Size: 74.6x46.7x17.4mm

Recommended E-liquid: Nicotine≤50mg

Colors: Gunmetal, Black, Forest Geen, Silver, and Red.

It also has all of the following:

1.PD Fast Charging (18mins)： The PD fast charging speeds up to 18 minutes from 0 to 100%.

2.Futuristic Mechanical Style: Designed in a futuristic mechanical style, the half metal and half transparent device demonstrates sturdy and sophisticated beauty. To create its natural delicate grip feeling, the body is designed in gentle angles. ARGUS P1’s 4 LED beams light on and off with soft and clear light.

3.AI Output Adjustment：GENE. AI 1.2 Chip adjusts the matching powers by sensing each puff automatically. Meanwhile, the LED lights show real-time output power and battery life.

4.ITO Atomization Technology：Equipped with VOOPOO's ingenious ITO atomization technology, ARGUS P1 brings you a delightful MTL experience.

5.Patented Leakage-Proof Design：Air-Tight Silicone Ring, Air-Tight Silicone Seal and 4-Hole Leakage-Proof Structure

6.The cartridge is compatible with ARGUS POD

Thoughts:

Its definitely a sturdy little pod device that can handle being dropped even if its not rated for that which ive done. Dropped it 2x in the last day onto concrete and it keeps on ticking. Another nice fewture is that the coil isnt built into the pod so you dont have to throw out the whole thing when only the coil is bad. Another thing that is nice is that it doesnt suck up the juice. Like its not a thirsty device. It sips it doesnt gulp. Oh and the flavor is far better than the Galex series devices. Im using an iced coffee flavor and it literally smells like i walked into a coffee shop and tastes like my colombian coffee which is something only my Maxus Max 168W pod device with its 2 18650 batteries can match. Its honestly astounding that its able to do that!

Verdict:
Wish it came in a resin edition or more flashy colors. Overall though its a solid little kit with a big flavor punch. Definitely worth picking up. I actually picked up a second one in the Forest Green that its available in. Its the first one ive reviewed that i actually went and preordered or even bought a second one. Thats saying something because i dont do that....ever.

Here's a lot of ten squonk rda clones with bf pins and some with accessories. Looking to sale for $60.00, US only, PP friends and family with no mention of ecigs, shipping included.
Attys are used, in good condition. Some have hairline scratches and beauty ring marks but can easily be buffed out...

"All attys are sxk clones"
1. Split rta with 24mm x-tank
2. No Name 24mm rda with spare cap and both pins
3. Hadley 22mm rda with spare post screws and clamps
4. Hellfire saber 22mm rda with bf pin
5. Hellfire strike 22mm rda with bf pin
6. A-atty rda with spare cap
7. Hellfire sentinel 22mm rda with spare cap and airflow rings
8. Haku venna 22mm rda with spare ultem cap
9. Hellfire short cranked 22mm mtl rda
10. Citadel 22mm rda with ultem cap.

Rrp over $100 with some attys costing over $25 when purchased not including the spares. Asking for $60 for everything.

thank you for letting me join hoping to learn a lot more about vaping

New to the forum

Jac Vapour Series-B DNA 25mm $75 shipped

Hi fellow vapers, as you all know I dont like posting single for sale items anymore. I rather just sale as a batch so I dont have to make multiple trips to the post. I try my best to keep the price as fair as possible for each lot.

Today for sale I have a total of six mods all in working condition. Some have signs of ware and minor scratches and tiny marks but all work as they should. Almost 1k rrp for only $250.00 shipped within the US, PP friends and family with no mention of ecigs.

1. Customized Therion dna 166 mod. Sand blasted by one of our very own members. I will include an rda and spare authentic XL canvas cut out with original leather piece and template for the door.

2. Rave mini 67 18350 ultem mod sqounker clone by SXK. Minor hair line scratches no dings in good condition.

3. Two Mixx SBS modz, one grey and one black both in good working condition. Gray has a visible scratch from my allen key slipping when taking it apart to switch the color tubes. Black has no visible scratches.

4. One og Triade dna 250 mod in working condition. Mod has signs of ware from daily use. Was thinking of cerakoting it because of the powerful dna 250 chip that handles every crazy low ohm build i put on it. Just never got around to it.

5. One Pulse squoker mod in a very used condition. The panels show signs of ware and the mod has visible scratches on the bottom. The mod still operates flawlessly with the vandy chip. It was my edc for its reliability. A serious work beater mod for those that work in harsh environments that need a reliable work mod.

Just $250.00 for six mods that will last a life time...



If you need more pictures just pm me. Than you for looking

Hello, this time we talk about Joyetech Ego Air Pod Kit. I will examine in this Test each of the characteristics that distinguish this item. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Joyetech Ego Air Pod Kit; Before starting let's see together some special features indicated by the manufacturer:
• 1. 650mAh battery capacity
• 2. 2ml e-liquid capacity
• 3. Mesh Coil inside
• 4. Easy filling without leaks
• 5. No buttons
• 6. Two options: With driptip 510 without filter, or with filter
• 7. Restricted airflow for MTL vaping



► Joyetech Ego Air Pod Kit; Packaging:
A simple white package, faded upwards with the color similar to the device it contains. The package frontally reports; the logo, the brand, the product image, some main features in the form of icons and the name "EGO AIR". On the back there are; content, specifications, scratch & check, color of the sample, barcode, warnings, logos and legal trademarks. Sideways find; disposal indications, references to the social media used by Joyetech for the promotion of its products, reference addresses of the manufacturer.





► Joyetech Ego Air Pod Kit; Packing List:
• 1x eGo AIR Battery Body
• 1x eGo AIR Pod
• 1x USB Type-C cable
• 1x Cotton filter
• 1x User Manual
• 1x Warranty certificate



► Joyetech Ego Air Pod Kit; Specifications:
• Dimensions: 16 x 122.5mm
• Battery: built-in 650mAh
• Tank capacity: 2ml
• Resistance: integrated 1.0Ω
• Vape mode: Constant voltage



► Joyetech Ego Air Pod Kit; Available colours:
• Stellar Black
• Twilight Blue
• Blazing Red
• Metallic Gray



► Joyetech Ego Air Pod Kit; First Impressions:
In the last period I got acquainted with some Pod-Basic devices of the Joyetech brand, such as; Evio Pod and Evio C. These vaporizers in their low-cost product segment, in my opinion are worthy of attention as they performed well during my tests. So I was also quite intrigued by the newcomer that I will tell you about in this article.



The Joyetech eGo Air POD is a super simple e-cigarette with a fountain pen form factor, absolutely ideal for beginners as it does not feature complicated key combinations, displays or anything else that is difficult to learn, plus it is truly pocketable. Joyetech sent me two different samples; one in "Stellar Black" color and the other in "Metallic Gray" color. This all-in-one has the body made of metal and is quite slender in the face of a small diameter of only 16mm. It carries two white writings "Joyetech" and "EGO AIR" as the only decorations, thus maintaining a serious and sober appearance. Judging by the small size of the single air inlet hole, this is a device designed for MTL.





According to Joyetech, the USB Type-C charging socket would guarantee a complete recharge of the electronic cigarette within an hour. And the nearby small LED has the task of signaling the battery charge level as follows:
• 60-100% The LED flashes slowly
• 20-59% The Led flashes moderately
• 1-19% The LED flashes rapidly
• Furthermore, during recharging, the LED remains lit in white and at the end of recharging it turns off.





The bottom of the compartment / pod has a hollowed-out drainage channel which should be used to collect condensation accumulations by keeping the contact pins and the sensor of the automatic puff sheltered and dry. There are also two small magnets to hold the cartridge firmly when inserted.



The PCTG cartridge is dark in color, but this does not prevent you from checking the level of the internal e-liquid. The refill is of the lateral type and allows you to comfortably insert up to 2ml of e-liquid even without removing the cartridge from the Mod.





A real peculiarity of this device is that you can use either the 510 drip tip you prefer, or the original drip tip with or without the supplied filter.



The 1.0Ω Mesh Coils are permanently installed so when it runs out you will have to buy replacement cartridges, according to Joyetech these coils guarantee a first-class taste experience and convince with their long life.



► Joyetech Ego Air Pod Kit; Final Conclusions & Vaping Test:
All in all, Joyetech eGo Air POD is really ideal for beginners, as it is the easiest vaporizer possible to use, this kit is also light, sturdy and extremely handy, ideal for everyday use. My Svapo test has clearly indicated that Ego Air Pod is well calibrated for MTL use, in fact the shot is sufficiently narrow, moreover it returns a good taste and an equally good perception of Hit (Shot in the throat). Personally I like to use this little vaporizer without the paper filter, this way I get a slightly more direct and loose puff and with more heat as I like it. Perhaps those who have just quit smoking will be able to find useful psychological support by adopting the filter.

I would like to thank Joyetech for providing me with the kits. I hope this review was helpful for anyone looking to buy the Ego Air Pod Kit:

Thanks for reading.

It’s been quite some time since I’ve done a review for Oxva but here I am finally. I was sent the Oxva Xlim SQ by Oxva in order to attempt to provide a fair and honest review. The Xlim SQ is a square shaped pod device like I’ve seen from other manufacturers. As a matter of fact, I just finished reviewing two other small square shaped pod devices. The SQ has a 900mah internal battery which is a step above some of the other similar sized pods I’ve tested. A larger battery is always a welcome addition. I did think it was odd that the Oxva website says that the SQ comes with .6 and .8 ohm pods but the one that I received came with a .8 and 1.2 ohm pods. Evidently there must be two different kits. Anyway, the SQ boasts USB-C fast charging and can charge up to 80% in less than 30 minutes. The pods included in the kit are the Xlim V2 pods like I used on the Xlim V2 when I reviewed it and have a liquid capacity of 2ml which is pretty standard. These pods are compatible with all Xlim devices. One thing that helps the SQ stand out is that it does have adjustable airflow which is an important feature to me. The SQ has an output range of 5-25 watts which is higher than other pods like this I’ve seen.







WHAT’S IN THE BOX?(According to the website)

1 x XLIM Cartridge V2 0.6Ω (Pre-installed)
1 x XLIM SQ Device
1 x Lanyard
1 x XLIM Cartridge V2 0.8Ω
1 x Type-C Cable
1 x User Manual



The sample I received included a .8 ohm V2 Pre-installed and a spare 1.2 ohm cartridge. I did not receive a V2 .6 ohm cartridge.



SPECIFICATIONS:

Output Power:5-25W
Cartridge Capacity: 2ML
Battery Capacity: 900mAh
Material: Aluminum Alloy+PCTG
Charging: DC 5V/1A, Type-C
Spec of Coils: 0.6Ω (20-25W) & 0.8Ω (12-16W) &
1.2Ω (10-12W)
Dimension: 14mm×47mm×68.5mm
Weight:44g



FEATURES:

1/X-TREME FLAVOR & STRONG THROAT HIT

2/ Highly leak-resistant
Anti-leaking design to prevent condensation at the bottom

3/High Compatibility - Xlim V2 cartridges,
The 0.6Ω cartridge works great on freebase as well

4/Ergonomic AFC
Airflow control on the side to find your best draw precisely.

INITIAL THOUGHTS:

The Xlim SQ arrived in a very bright and colorful box. The color picture on the front of the box unfortunately was not the color version that I received. The one on the box was a nice fade from pink to black but the one I received was just pink. I can honestly say that if I had a choice, I would have picked any other color besides the one I received.

The front of the box shows the Xlim SQ name in large lettering and tells you in the top left corner which version is inside and once again, unfortunately I received the .8 and 1.2 ohm version. I would have preferred to try the .6 ohm pod. Most companies that I do reviews for would have sent one sample of each for a review but sadly this did not happen with this one.

The back side of the box has a brief description, contents list, Oxva company information, and a scratch and check authenticity code. The box for the SQ doesn’t have the normal lift off top but instead opens from either end. The SQ sits in a plastic tray with the .8 ohm pod pre-installed and the spare 1.2 ohm pod, lanyard, USB-C charging cable, and user manual are sitting underneath the plastic tray when you slide it out.

As you can see in the picture above, the front of the SQ just has the Oxva name and a single indicator light on the front. The light tells the user what the battery level is. It starts out with green then switches to blue and then red as the battery drains.

• Green = 65-100%
• Blue = 30-65%
• Red= Less than 30%

The opposite side has the Xlim SQ name printed on it and nothing else.

On one end there is the airflow adjustment. There are three airflow holes and the airflow can be adjusted from a tight MTL to an RDL. Once again, I wish I had gotten the .6 ohm pod to try it out in RDL. On the opposite side are the two openings in the aluminum body that provide a place for you to connect the included lanyard if you choose to use it. Myself, I don’t like lanyards and don’t use them. However, the SQ is very lightweight and could easily be hung from the neck by a lanyard without feeling heavy.

The top of the SQ has the pod opening has the standard gold plated spring loaded contacts as well as two magnets to hold the pod securely. Also is the raised airflow inlet for the auto draw. It is raised on this one and many others I’ve seen in order to prevent liquid from getting into the opening and causing the unit to fail. Also on top is a textured black section which is more of a decoration than anything. It almost looks like it is rubber but it is just hard plastic. The bottom of the SQ is where you will find the USB-C fast charging port so you won’t be standing this one up to charge. Not a big deal to me.

The pods included with the SQ are the Xlim V2 cartridges. They are available in .6, .8, and 1.2 ohm resistances. They are compatible with all versions of the Xlim. The cartridges are slightly tinted and not clear like they appear in the pictures below. However, you can still pretty easily see the liquid level in normal lighting. When the liquid level gets to the level of the body of the pod then it’s about time to refill.

The pod that comes pre-installed is the .8 ohm pod in my kit that is rated for 12-16 watts and comes with a plastic cover over it to protect it from being fired before filling. The spare pod in my kit was a 1.2 ohm rated for 10-12 watts. Both pods have two magnets, two gold plated contacts, and two airflow holes.

The pods are a side fill with a rubber plug. I would have much preferred a top fill as that is what I prefer to use when using pods. I don’t have good fingernails and had a bit of difficulty opening the rubber plug at first. Once open, I was able to fill with a plastic 10ml bottle easily without making a mess. I found the mouthpiece very comfortable to use.

FINAL THOUGHTS:

I felt like the Xlim SQ delivers on what it promises to do. Although I don’t care at all for the color that I received for the review, it delivers a nice throat hit and pretty good flavor when using the .8 ohm pod. The 1.2 ohm pod was a little low on output for me. I had to tighten the airflow down quite a bit to warm the vapor up and boost the flavor some. It wasn’t bad. As I mentioned earlier, I think the SQ would have come alive for me with more output had I received the kit version with the .6 ohm pod.

I do like that Oxva was able to incorporate a 900mah battery where others of similar shape or size seem to be 800mah or less. I have recently tested several that were 800mah and could definitely tell a difference in how much liquid I was able to go through compared to the lower mah batteries. Most 800mah batteries allow me to go through 3-4ml of liquid and was able to fill the pod twice and a little more before the battery had neared its end and I could tell that it was time to recharge since the output seemed reduced. When you’re dealing with a 2ml pod then another 100mah can really make a difference.

So, would I recommend the Oxva Xlim SQ? If you’re looking for a small square auto draw only pod then this is a good one. If you like lanyards then that’s another plus for you. The extra battery capacity and fast charging are definitely something to take into consideration. I personally prefer top fill pods but if you don’t mind a side fill then this might be a good one for you.

I’d like to thank Oxva and Jocelyn for sending the Oxva Xlim SQ for this review. Thanks also to the readers as you have made it to the end of another one of my reviews. Below is a link to the website if you’d like to take a look around.

XLIM SQ – OXVA

This came across my feed this morning. Curious to see if it’s safe for vapes. Unable to find discharge rate.

Smoktech SMOK T-Air Subtank Tank Clearomizer
authentic / 5ml / TA 0.2ohm coil & TA 0.15ohm dual coil / 32mm diameter


Details:
If you're looking for a tank to provide a range of practical and functional features, look no further than the all-new T-Air Subtank, which raises the bar for what an excellent tank should be. Its top dual-slotted honeycomb airflow control is designed to produce unprecedented flavor and vapor, while its top fill system with dual filling ports puts an end to leakage. Innovation keeps changing the vaping experience!

TOP AIRFLOW, TOP NOTCH FLAVOR: The top airflow system features a dual-slotted design with honeycomb airflow control that shortens the airway and reduces air loss for increased vapor and enhanced flavor.
T-Air Subtank is meticulously designed to be completely leak proof.
PUT INGENUITY INTO YOUR TANK: The quarter-turn top cap and dual filling ports facilitate e-liquid filling process.
REPLACEABLE 810 DRIP TIP: T-Air Subtank's drip tip is a standard 810 drip tip with a diameter of 16mm that fits perfectly into your lips.
5ML E-LIQUID CAPACITY: The newly developed bulb glass tube measures 32mm in diameter with an e-liquid capacity of 5ml. It guarantees a durable vaping enjoyment, as there's no need to add the e-liquid frequently.
Coil Specification: TA 0.2ohm Coil(2in1 single meshed, 50-70W/best 65W) / TA 0.15ohm Dual Coil(Dual meshed, 40-60W/best 55W)
32mm Overall Diameter
510 Threading Connection

The Astro Style DNA 60W Boro Mod is made from POM and powered by 1 x 18650 battery (not included).
The Astro Style DNA 60W Boro Mod is powered Authentic Evolv DNA60 Chipset and Compatible with BB / Billet Boro Tank.
More info Astro Aio box mod clone
POM construction
Powered by 1 x 18650 battery (not included)
Powered by Authentic Evolv DNA60 Chipset
Compatible with BB / Billet Boro Tank
Variable Wattage: 1~60W

QUICK LINK，Click Here>>Buy Astro Style DNA 60W Boro Mod Black POM

Hi!

Haven't posted in years. Been vaping ryo nonflavor salts from my hastur mini(s) on Ehpro 101s for... a long time.

The Hastur Mini seems to be discontinued, and I'm out of glass (last order was 50 about 4 years ago...)

I've got a siren 4 and a berserker mini coming, they both seem very similar to my hasturs.

What I can't find is a replacement/backup for my Ehpro 101s. I'm simply too hard on gear to justify buying a real Dani. I just know I'd bust it.

Any suggestions? HAS to be a single 18650 tube. Fits next to my wallet in my back pocket and I've got too much muscle memory to change now.

Should say thanks to this forum also --- got me off cigs in 2009 and I haven't gone back. Snused for a while (and I still do when I fly) but high nic salts brought me back to vaping.

Just saying hi I'm new here

Hello,
Just a quick question, can you use the Zenith II replaceable glass in the Zenith Pro? They are both 5.5ml so I figure it might be possible. Im having a hard time finding the Pro glass in stock but finding plenty of the Z-II's glass so thought they might work? I will eventually find the Pro's glass but it does pose an interesting question.

Thanks in advance.

Hi, today let's take a look at VAAL 800 TPD Disposable Vape. In this Test I will examine each of the characteristics that distinguish this item. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► VAAL 800 TPD Disposable Vape; Before starting let's see together some special features indicated by the manufacturer:
• 2ml e-liquid capacity
• 17mg / 0mg nicotine salts
• Smooth and pure flavor
• Wide range of flavors available



► VAAL 800 TPD Disposable Vape; Packaging:
The cardboard box of Vaal 800 is customized according to the color of the kit it contains. On the front you can see; the indications regarding the flavor, the partial image of the device, the nic strength and the warnings on the nicotine itself. On the back of the package you can read; the specifications of the product, the ingredients of the e-liquid used, the supporting information of the manufacturer, the addresses, trademarks and logos of the law. On the remaining sides you find; the scratch & check, a barcode and warnings on the use of nicotine.





► VAAL 800 TPD Disposable Vape; Packing List:
• 1 Electronic device preloaded with 2ml of liquid
• 1 information leaflet

* As you can see, the Vaal 800 device is contained for hygienic reasons inside a vacuum-packed sanitary package. On the back you can read the flavor of the liquid contained in the cartridge, the max number of puffs that can be reached, and the mg / ml nicotine concentrate.



► VAAL 800 TPD Disposable Vape; Specifications:
• Measurements: 19.5x89mm
• Weight: 27g
• Battery capacity: 400mAh
• Device capacity: 2ml
• Resistance: 1.6Ω
• Puffs: Up to 800



► VAAL 800 TPD Disposable Vape; Available flavors and colors matched to the device:
• Light blue: Cotton Candy, Mint.
• Dark Gray: Use Mix, Classic, Cola Ice.
• Yellow: Banana Ice, Milk Banana
• Orange: Strawberry Ice Cream, Mango Ice, Energy Drink, Pear Granadilla
• Red: Lush Ice, Strawberry Kiwi, Apple Ice
• Pink: Peach Ice, Mixed Orange, Strawberry Ice
• Green: Pineapple Ice, Aloe Blackcurrant, Double Apple, Lychee Ice, Guava Granadilla
• Purple: Blueberry Ice, Mixed Berries, Blackberry Ice
• Dark Orange: Orange Ice, Peach Mango, Fruit Punch



► VAAL 800 TPD Disposable Vape; First Impressions:
The "mission" declared by Vaal is noble and consists in the production of disposable vaporizers useful to help the consumer in the transition from burnt smoke to undoubtedly healthier than steam, also ensuring a better and more effective intake of nicotine. Vaal 800 is a small and nice cylindrical shaped vaporizer, it does not have the USB socket for charging and no activation button, its form factor makes it highly pocketable like a common lighter, make sure you don't lose it because it is really small , while you work you can comfortably hold it between your lips and without the use of your hands!



The body of Vaal 800 could be plastic even if it has a metallic "consistance", therefore sufficiently robust, the paint is very velvety, almost rubbery. The only decorations on the body of Vaal 800 are; the large vertical writing "Vaal" and the small horizontal writing that indicates the flavor it contains.



Before starting to use Vaal 800 it is necessary to remove the silicone plug on the spout and the adhesive protecting the only hole for the air flow on the bottom.



The driptip has the classic anatomical conformation of a duck's bill with an internal hole about 5mm wide. On the bottom of Vaal 800 are present; the disposal logo, the C E logo, the EU logo and the hole for the passage of air to the coil, this hole also contains the luminous LED that is activated during extraction, of course when the LED stops working, it will have arrived time to dispose of the device.



► VAAL 800 TPD Disposable Vape; Vaping test & final conclusions:
For this test Vaalvape sent me two samples, one Double Apple flavor and the other Strawberry Kiwi flavor. I always feel lucky when I get something to test, especially when I get fruit flavors because they are quite in line with my tastes. I must say that looking at the catalog of flavors available, my mouth watered for the great variety of flavors on display, there are; fruity mixes, creamy flavors and tobacco flavors, so many and for all tastes!

• Double Apple:
A crunchy mix of red apples and yellow apples well done, I distinctly capture the flavor of these two fruits, the iced part is pleasant and remains for a long time in the mouth.

• Strawberry Kiwi:
The sweet strawberry and kiwi smoothie brings back to the beaches, the sea and summer, a truly "all-day" soft taste

I liked both of these flavors, and they are supported by a very balanced MTL extraction, not very restricted and sufficiently smooth to taste them worthily, moreover the manufacturer declares that with the integrated 400mAh battery it is possible to reach 800 puffs which is a number well above the average. of competing devices. What to say? Fantastic! For me, Vaal 800 is passed with full marks.

I would like to thank Vaalvapor for providing me with these kits. I hope this review was useful for anyone who wants to buy VAAL 800 TPD Disposable Vape.

Thanks for reading.

Aspire Marketing Department unveiled the new member of Flexus Series family on October 20, 2022---Flexus Fit. The Flexus Series encompasses 4 devices: Flexus Blok, Flexus Stik, Flexus Q and Flexus Fit. The premium aesthetics, innovative technology and intelligence are engrained in the DNA of the Flexus Series, and the latest iteration exemplifies that heritage. The Flexus Fit is once again raising the bar for what a MTL and RDTL vape device can do, proving that even stylish and cost-effective vapes can provide a top-notch vaping experience.

As a new mainstream MTL and RDTL vape device, the all-new Flexus Fit epitomizes Aspire’s classic design and craftsmanship, seamlessly integrates visually striking double-colored injection molding materials within a compact pod-sized structure for comfortable grip as well as visual enjoyment. Meanwhile, a durable 850 mAh battery is built in Flexus Fit body, combined with an ample 3.5 ml e-liquid capacity and double-sided airflow intake system, fulfilling the demand for daily use or several days trip with ultra-smooth vaping experience. Moreover, the coil can be replaced, the pre-installed AF 0.6Ω mesh coil is made for intensive clouds chasers, while the another compatible AF 1.0Ωcoil is a good match for different e-liquids especially nic salt.

Aspire’s classic vape devices have always come with various color options, and the Flexus Fit is no different. Available in White, Purple, Pink, Blue and Yellow, just treat your Flexus Fit like a personal style signature, by choosing the color that best represents yourself.

Key features of the Flexus Fit include:

. A perfect balance between flavor and clouds.

. Designed for MTL and RDTL.

. Compatible with AF coils.

. Adopts double-colored injection molding materials.

. Built-in 850 mAh battery for long-lasting use.

. Adopts Type-C, 1A quick charging.

. Dual airflow intake inlets, ultra-smooth vaping experience.

If the launch of new features have you considering picking up a Flexus Fit, you can learn more in our full review right here.https://www.aspirecig.com/flexus-series/flexus-fit/

Dear valued customers,

Time to stock up for the coming Black Friday, HealthCabin teamed up with VAPORESSO to offer huge discounts on some hot selling VAPORESSO products.

Promotion Products:​

• XROS Series
• LUXE X
• Zero S

Discounts​

We’ve created a 10% OFF coupon code for them, let’s check it out!!

• Coupon code: VP10
• Date: 24th OCT – 7th Nov, 2022(-0600 GMT)
• Wholesale Only

Shop All 10% OFF VAPORESSO Products Here

Zero 2 Deal – Buy 1 Get 2 Kits​

Vaporesso also released another promotion for the Zero 2 Kit – Buy 1 get 2 standard kits. Check it here.

With any questions, feel free to contact your account manager.

Please view the VAPORESSO Pre-Black Friday Sale here.

Many people asked me to talk about Caliburn GK2, because it sold very well before, so in order to let more beginners who are new to vape and vapers who have not bought this product can have a thorough understanding, today I will focus on the Let me tell you about this great product.

Uwell Caliburn GK2 Vape Kit has a flat square design with a stylish and cool appearance. There are 4 colors to choose from. The unique pattern on the body adds a sense of technology to the device. The drip tip is also flat, which can be better placed in the mouth for suction, which greatly improves the user experience.

The whole machine is equipped with a built-in battery of 690mAh, and the battery capacity is not large, but the type-c charging interface at the bottom can allow the device to be fully charged quickly, without worrying about it stopping working.

The matching pod capacity is 2ml. The top injection method can prevent the occurrence of liquid leakage and provide a clean and tidy use environment. The transparent viewing window can also observe the use situation at all times for timely replenishment.

UWELL GK2 Kit is compatible with 1.2ohm CALIBURN G2 coil and 0.8ohm CALIBURN G coil, which can bring you different cloud and stable flavors. The plug-in coil replacement method provides you with a more convenient replacement method.

Vape online uk offers the best buying service, come and try it.

we recommend to you：
valyrian 2 tank
smok nord 4 leather

Argus P1 Kit adopts futuristic mechanical style with half-metal and half-transparent appearance to demonstrate sturdy and sophisticated beauty. It is powered by a built-in 800mAh battery with 20W max and Type-C charging. It also supports 15W PD lightening charging to realize full charge in 18 minutes. What's worth mentioning is that the 1.2Ω atomizing coil after charging for 5 minutes can support 2 hours vaping for each puff every minute. Equipped with the intelligent GENE. AI 1.2 chip on the transparent side, Argus P1 can adjust the matching powers automatically to save energy and maintain battery life. In addition, the ITO atomization technology can bring you the ultimate enjoyment of taste and flavour. It also has the sideway air adjustment for tight to loose airflow and the 4-hole air inlet for smooth taste. Argus P1 is fit for Argus Pod Cartridge 0.7Ω/1.2Ω. It features 2ml capacity, easy side filling system and patented leak-proof design. Argus P1 also has the advanced ergonomic mouthpiece to perfectly fit your lip. Just get it.

Sourcemore×VOOPOO Argus P1 Kit Giveaway, 6 winners, ends on Oct. 27th, 2022

Enter here

Hey folks,

What is the great news today? Sourcemore brings you the excellent vape kit-VOOPOO Argus P1 Kit

Argus P1 Kit adopts futuristic mechanical style with half-metal and half-transparent appearance to demonstrate sturdy and sophisticated beauty. It is powered by a built-in 800mAh battery with 20W max and Type-C charging. It also supports 15W PD lightening charging to realize full charge in 18 minutes. What's worth mentioning is that the 1.2Ω atomizing coil after charging for 5 minutes can support 2 hours vaping for each puff every minute. Equipped with the intelligent GENE. AI 1.2 chip on the transparent side, Argus P1 can adjust the matching powers automatically to save energy and maintain battery life. In addition, the ITO atomization technology can bring you the ultimate enjoyment of taste and flavour. It also has the sideway air adjustment for tight to loose airflow and the 4-hole air inlet for smooth taste. Argus P1 is fit for Argus Pod Cartridge 0.7Ω/1.2Ω. It features 2ml capacity, easy side filling system and patented leak-proof design. Argus P1 also has the advanced ergonomic mouthpiece to perfectly fit your lip. Just get it.

To enter:
Play word chain: comment one word and the word should be related to vaping. One word per post and the word has to begin with the last letter of the previous word commented.

Example:
Sourcemore
Ejuice

If you draw a blank post like
'VOOPOO Argus P1 Kit'
The next post will start with Letter 't'

Note:
1. One winner will be picked by random.org on Oct. 28th, 2022.
2. You must be over 21.
3. Number your entry, for instance: #Post 1.
4. Max 3 replies for each member.
5. If a winner is unable to claim a prize due to unforeseen circumstances, we would choose another winner for the contest.