Innokin Coolfire Z60 // Review by HyDrOpOnIc1987


Hey everybody over here at ECF, hope you all are well. I'm back with another review. This time, it's a cool little kit from Innokin called the Coolfire Z60. I was sent 2 of these kits by my contact at Innokin, whom we know as @Innokin_timmy for the purpose of a fair and honest review. Unlike the usual, I wont just be focusing on the kit and brushing by the coils (in this case one in particular), I will be featuring the new 0.6ohm Duo Prime ZCoil as well. It has some cool new tech involved in it. As usual, I will start by showing some promotional images and information and then lead into my own unboxing, assembly and usage highlights. Alright, that was a mouthful. Let's get to it.

Promotional Images






The Coolfire Z60 kit is offered in 7 different colours: Purple, Blue, Gunmetal, Stainless Steel, Black, Pink and Red.



The Coolfire Z60 boasts an impressive 2500mAh internal battery, which should give a days worth of vaping care-free. The Coolfire Z60 also hosts a USB-C port, which means reliable rapid charging.


Housed on the bottom of the Z60 mod's front panel is a battery master switch. You can safely turn the device on and off by using that switch. That said, when turning it on you must still press the fire button 3x. (For the record, there was an image supposed to be here with this but after 5 failed attempts, I gave up on it. Sorry)



Just as the last generation, the Coolfire Z60 has a refresh function to help renew your coil and improve it's longevity. This function is activated manually, within the menu, and will heat the coil with 40% of your active wattage. The refresh function cleans residue and allows the wick to become saturated.





The Coolfire Z60 kit includes the new Zlide Top. This is the newest Zlide tank and it features a top airflow. The beauty of top airflow is that it eliminates leaks. The Zlide Top (and the Zcoils it uses) facilitates a tight MTL to smooth and flavorful RDL, which should please a majority of vapers.



Alright, and here we are, the new Duo Prime coil. It is a 0.6ohm coil, but unlike other coils it has 2 in 1! It has a inner round wire coil and an outer mesh coil with wicking stuffed between them. This coil is a MTL coil, but the outer mesh allows the coil to wick easier and stay saturated which will extend the longevity of the coils. As a bonus, this coil is also more flavourful than other MTL coils. This is the coil that comes pre-installed in the Coolfire Z60.



The Zlide Top's improved sliding top-fill system let's you refill without any messy leaks or spills.



The Zlide Top has 3 different tank sizes and can be changed by replacing the glass. The 3 options available are: 2ml, 3ml and 4.5ml.



The Coolfire Z60 kit comes with 2 coils: the 0.6ohm Duo Prime and a 0.3ohm mesh coil. But the fun doesn’t stop there, there's a total of 8 different Zcoils available (including the 2 in the kit). The coils currently available are:
MTL - 0.6ohm Z-Coil Duo Prime, 0.48ohm Z-Coil Plex3D, 0.5ohm Z-Coil Plexus, 0.8ohm Z-Coil KAL, 1.2ohm Z-Coil KAL, 1.6ohm Z-Coil KAL
RDL – 0.3ohm Z-Coil KAL and 1.0ohm Z-Coil KAL


Features
- Compact Size with 2500mAh Internal Battery
- Increased Coil Lifespan with Coil+ and Refresh modes
- Up to 60W
- Compatible with Platform Series Z-Coils
- Included Zlide Top Airflow Tank

Specifications
Brand: Innokin
Unit: 1 Set
Dimensions: 126mm by 38mm by 27.2mm
Battery: 2500mAh
Wattage Range: 6-60W
Chassis Material: Zinc-Alloy
Coil+ Mode
Intuitive Firing Button
Display Screen: 0.96 inch OLED
Two Adjustment Buttons
On/Off Switch
3-18s Cut Off Protection
Low Voltage Protection
Short-Circuit Protection
Atomizer Protection
Threaded 510 Connection
Charging Speed: 1.7A
Charging: Type-C Port
Diameter: 24mm
Tank Capacity: 3ml
Sliding Top Fill System - Single Fill Port
Pyrex Glass Reinforcement
Tank Material: Stainless Steel
Innokin Z Coil Series
Packaging: Cardboard Box

Contents of Box
1 Coolfire Z60 Mod
1 Zlide Top Tank
1 0.6ohm Z Coil
1 0.3ohm Z Coil
1 Spare Glass Tube
1 Spare Drip Tip
1 Spare O-Ring Set
1 Type-C Cable
1 Quick Start Guide
1 Warning Booklet


Unboxing, Assembly and Usage Highlights



The boxes are he usual awesome recyclable cardboard and paper sleeves to hold all the extra bits and pieces. Kudos to Innokin for trying to think of the planet, even just a little. As it is a standard Innokin product box, the Innokin branding is on the top of the front, followed by a picture of the device in the included colour and a small list of features for the device and tank. Beside the Innokin branding is a sticker that shows that a Duo Prime coil is included. At the bottom (bottom 1/3rd of the box) is a warning that this product contains nicotine, which technically it doesn't until the user fills it after purchasing, but that's apples and oranges I suppose.

On the right side of the box is Phil Busardo's signature and branding. The left side is a sticker showing the device and it's colour. The back of the box has Innokin’s branding on the top, followed by a list of contents for the package. Directly under that is Innokin's contact information and social media handles. To the right of the list is a Scratch and Verify sticker which has a QR code and Innokin branding and numbers on it. Under that is a UPC sticker. Then there is a line of warning symbols followed by another nicotine warning that takes up about 1/3rd of the back of the box.

Opening the boxes, you are met with a card that has a message from Innokin and is signed by Phil Busardo and Dimitri Agrafiotis and a QR code. On the back of the card, it shows the included coils and explains the new Duo Prime coil and it's features and uses. Moving past the card, you get your first sight of the mod and tank. Above the tank is the spare glass, which is thoughtfully wrapped in tissue paper. Lifting the sleeve that houses the mod and tank you will find a manual, a warning and safety booklet, the spare 0.3ohm mesh coil, spare o-rings and a RDL drip tip and a USB-C cable.



After looking at everything, I took the mod and tank out of the box. I dismantled the tank, set aside the coil for the moment, and washed the tank thoroughly with soap and water. I use q-tips and a toothbrush to clean with and dish soap as the washing agent. I dried what I could with a tea towel and shook out the rest. I then reassembled the tank, minus the coil.

The coil that was already in the tank is the new 0.3ohm Duo Prime coil. This coil apparently is 2 coils in 1. It has a round wire coil in the center, followed by some wicking material and then a mesh coil that surrounds it all. Around that is another thin layer of wicking material.





These coils apparently extend the longevity of your coil, and it improves the flavour as well. I’m not sure of it yet, as I haven't tried it. I was asked to feature this coil, so this is the one I picked to use. This is new technology from Innokin and they want it showcased, and if it works properly, I can't blame them. I was also given a couple extra coils along side, a 1.2ohm Z-Coil KAL and a 0.5ohm Z-Coil Plexus. As I wanted to test the flavour and longevity of the new Duo Prime coil, I picked the more traditional 1.2ohm coil to go in the second device. I want to mention that neither of those coils come with the kits. They were sent to ME for the purpose of providing YOU with as complete and honest a review as possible.

Now that that is out of the way, I took both coils and started to prime them. I took my 10mg mango Salt Nic liquid and put one drop in each hole and went around the coil in a circle 2 times. I want to prime it but I don't want to over saturate it. I want the coil to be able to soak up some liquid after it's been placed in. In my anecdotal opinion, I feel like it helps a vacuum form in the tank which moves the liquid through the tank and into the coil efficiently. Now that could be wrong as it is only based on my experiences thus far in vaping. After the coils are primed, I replace them in their tanks and wait about 15 minutes to allow the wicking material to become fully saturated.



While waiting for the coil to fully saturate, I went exploring in the menu. To access the menu you press and hold both the up and down buttons at the same time. The options in the menu are: Coil+, Wattage, Refresh, Cutoff, Screen and Back. The Coil+ menu houses the Wattage+ and Voltage+ options. I only ever use wattage, so I picked Wattage+ and left it at that.



First impressions of the new Duo Prime coil are that it indeed was more flavourful. It brought the mango out and even brought out a flavour that I couldn't place, which I didn't taste before. The 1.2ohm standard round wire Z-Coil tasted really good too, but it definitely lacked some depth that the 0.6ohm Duo Prime coil brought to the party. I also noticed that the draw resistance of the Duo Prime coil was slightly tighter. I'm not sure if that was intended, but that’s what I noticed.

I used these vapes for about a week and a half now. Neither have dropped in flavour or performance, but to be fair that week and a half should be halved as it's time was divided between the 2 vapes. As such, I didn't need to try the refresh function offered on the Z60 mod. I have refilled both tanks 3 times so far, so there really hasn't been much time for degradation of the coils. Each time I refilled both tanks, it went flawlessly. No leaks what-so-ever and no spills from accidentally dropping the device while filling. I did just that on my first refill and the tank was slide wide open. The tank survived in perfect shape and the mod got a minor scratch, not exactly a big deal.

In my week and a half or so of using these devices, I didn't experience any issues. I had a very happy and satisfying experience. Both the Duo Prime and the standard MTL Z-Coil performed exceptionally, but that's the usual for Innokin.

I would recommend these devices to anyone who wants to get a little more control out of their vape and move away from pod devices. I would also recommend this to someone who wants to quit smoking. I wouldn't recommend it to anyone who has issues around technology, something simple miht be more suited for you.

I am providing links to Innokin's website as well as a link to the Coolfire Z60 below.


Innokin's website: INNOKIN® - A Leading Global Vape Brand & Manufacturer
Coolfire Z60: Coolfire Z60 - Vape Kit | INNOKIN®


I would like to thank my contact at Innokin, @Innokin_timmy , for sending me these devices to review. I would also like to thank you for reading this review. I hope that you were able to learn something and I hope that I help you with your decision, whichever way, for whether this device is for you.

Alright, I'll see you next time.

Cheers!

This thread is for the general discussion of the product GEEKVAPE L200 Classic : New Legend 2. New Power Beast.. Please add to the discussion here.

The manufacturer recommends a mix of 8-10%, which is quite economical. I mixed it at 10% and let it sit for two weeks. The description says it will be a coconut, rum drink flavour. I was really looking forward to it as I have never had a Pina Colada. Theoretically it's white rum, pineapple juice and coconut syrup. The aroma is characterised by coconut and rum. The flavours also come through quite strongly, with the pineapple and rum dominating. The pineapple is a little too ripe to be noticeable alongside the rum. Both flavours come through well, but the coconut is very much at the back of the line. If I imagine a drink that actually contains pineapple juice, coconut syrup and white rum, I would not find this flavour suitable for a tropical beach. All this is entirely subjective, I'm sure there will be vapers who will be happy to steam it in their back garden pool .

Great to deal with.

SMOK Nord 5 Pod Kit has been on the market for a long time. As you can see, it can be said that the sales are very good. It has been sold out of stock before, not only its appearance design, but also its function and performance. Said to be both comprehensive and powerful, let's take a look at the uniqueness of this product.

Nord 5 Kit has launched a total of two series of products, namely the ordinary series and the leather series. The ordinary series has 8 colors, while the leather series has 4 colors to choose from. If the vapers who pay more attention to the feel are more inclined to the leather series.

The whole machine uses a 2000mAh built-in battery, the maximum output power can reach 80w, there is a power switch button with an LED indicator in the middle of the body, and a 0.69-inch OLED display on the side of the body, so that you can clearly understand Various vape data.

The Nord 5 vape cartridge is compatible with the kit, and the 5ml e-liquid capacity can provide a longer life cycle and reduce the frequency of adding e-liquid. The Pod comes pre-installed with a 0.15ohm mesh coil, giving you a stable and even cloud and flavor. The new magnetic link technology can prevent the occurrence of falling off and also prevent the occurrence of oil leakage.

Vape shops uk online cheap are worth visiting, the price is definitely beyond your imagination.

We share with you：
vaporesso luxe x uk
best voopoo argus gt 2

Lost Vape Orion Art Pod Kit

Orion Art Kit is the ultra small and compact pod system Kit. It is powered by the Lost Vape Quest Chip and a built-in 800mAh battery with 18W max. It features the crystal clear casing appearance, a metallic disc fire button and LED light display. It also has dual activation modes: auto-draw and press-to fire. In addition, it features 2.5ml e-juice capacity, easy refilling system and adjustable airflow control for MTL to RDL vaping. It also bundles 0.8Ω and a 1.0Ω UB Mini Coil in the package.

Details:
1. Small, slim, light and ultra compact
2. Powered by Lost Vape Quest Chip
3. Built-in 800mAh battery with 18W max
4. Designed with the LED light display
5. Equipped with a metallic disc fire button
6. Auto-draw and press-to-fire activation mode
7. Crystal clear appearance to check the juice level
8. Adjustable airflow control for MTL to RDL vaping
9. Bundles 0.8Ω and a 1.0Ω UB Mini Coil in the package
10. Short-circuit/weak battery/over heat protection




Uwell Crown D Pod Mod Kit

Crown D Kit, the new member of Uwell Crown series products, is a multi-functional and powerful vape product. Crown D has a large battery capacity of 1100mAh, and features 5W-35W output power range. You can see the real-time vaping information through the 0.96 inch TFT display screen. Crown D supports 5 different output modes (POW, VOLT, CURVES, BYPASS, and CUSTOMIZE), which not only ensures your basic function needs, but also enriches vaping experience. Under CURVES mode, you can set different voltages during one vaping period; under BYPASS mode, the device will output according to the current battery level. In addition, it adopts Pro-FOCS flavor adjustment technology and convenient side airflow adjustment. The cartridge can hold 3ml e-liquid capacity, features top filling and strong magnetic pod connection. Two meshed coils are added to satisfy MTL till DTL vaping.

Details:
1. 5 output modes: POW, VOLT, CURVES, BYPASS, CUSTOMIZE
2. Individual parameter settings
3. Stepless power adjustment
4. 1100mAh large battery capacity
5. 0.96 inch TFT display
6. Auto-draw & button firing dual ignition way
7. Convenient top filling system
8. Strong magnetic pod connection
9. Pro-FOCS flavor adjustment technology
10. Convenient side airflow adjustment

Hi, today let's take a look at the Wotofo NexPOD Kit. I will examine each of the characteristics that distinguish this item in this Test. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Wotofo NexPOD; Before starting let's see together some special features indicated by the manufacturer:
• Powered by nexCHIP, 0.001 second response speed
• Equipped with nexMESH technology, it provides excellent and stable flavor
• POD capacity: 8ml
• Puff count: 3500 puff / POD
• Battery capacity: 650mAh
• Charging port: Type-C
• Adjustable air flow



► Wotofo NexPOD; Gift Box:
When the courier rang the bell and handed me the package, I thought it was a take away pizza! Then I looked closer and realized it was a great vape kit and it was from Wotofo which is one of my favorite companies. Of course this great pack is intended for reviewers as it contains no less than two Mod devices and 18 different flavors which is the full range of flavors. The standard kit that you will normally find on sale (probably) contains:
• nexPOD rechargeable mod
• replaceable cartridge (pre-installed)
• User Manual
• warranty certificate





The contents of this huge Gift Box I believe will also be sent to the stores that regularly supply themselves from Wotofo, in fact there are many silicone hygienic caps that will be used to make vapers try these 18 wonderful flavors.





► Wotofo NexPOD; Specifications:
• Dimensions: 83.3mm * 42.4mm * 23mm
• Battery: 650 mAh
• Charging: USB Type-C
• Volume: 8ml
• Resistance: 1.1Ω
• 3500 shots
• 18 flavors



► Wotofo NexPOD; Available Flavors and Colors of the Mod:
There will probably be 4 colors of choice for the Mod and as many as 18 different flavors of choice.

• Colors of the Mod
- Black
- Grey
- Red
- Light blue

• Available flavors
- Mango Yogurt Ice
- Strawberry Yogurt
- Mango Gummy
- ThreeMelons
- Monster Ice
- Tropical Ice
- Purple Razz Ice
- Pina Colada
- Strawberry Cone
- Grape Apple
- Strawberry Mango
- Forest Berries
- Watermelon Lychee
- Strawberry Lush
- Mango Pear
- Sakura Milk
- Caramel Tobacco
- Mint



► Wotofo NexPOD; Mod:
Wotofo NexPOD was launched on the market after the success of its disposable product lines such as Wotofo Skuare 6000, Wotofo Cokebar 5000, Wotofo Ultra, Wotofo Mini Plus, Wotofo Waffer. NexPOD combines the benefits of pre-filled POD systems and disposable e-cigarettes.



The smooth anodized aluminum finish of nexPOD not only gives the device a classy appearance, but also offers a high level of wear and scratch resistance. The weight is extremely low as are the dimensions that are pocketable. On the body of the mod there are white lettering and a slight rough horizontal texture on one side





The Wotofo NexPOD kit is easy to use thanks to the design of the Mod which magnetically connects the pod, simply insert the pod and suck. Thanks to the metal base and independent contact electrodes of the POD, conduction between the POD and the device is more stable. The adjustable airflow in the lower body allows you to choose the vaping style you prefer.



The nexPOD case features a built-in battery with a capacity of 650mAh. Charging takes place via the USB Type-C connector located at the bottom. It takes about 30 minutes to recharge the Mod.



► Wotofo NexPOD; Pod:
The PODs of this device contain 8ml of premium e-liquid, it is enough to deliver up to 4 times more puffs than most similar devices of the same price level on the market. Wotofo has found the solution to spend less and vape more!



The cartridges for the device are available in 18 varieties of pre-filled e-liquids and are marked with the flavor contained in them. Obviously it is not possible to reload. The liquid is fixed with nicotine salt with an intensity of 5%.



The spout is comfortable for the lips and can be rotated at will because the cartridge when inserted in the mod can be rotated 360 °.



The 1.1Ω nexMESH used in nexPOD is long lasting and provides excellent and stable flavor until the last drop of e-liquid.



With the nexCHIP inside, the nexPOD has a fire response of just 0.001 seconds. nexCHIP guarantees a quick response while maintaining all the necessary security features.



► Wotofo NexPOD; Vaping test and final conclusions:
Since nexPOD kit arrived and it's been about 10 days, he has become my faithful companion for my evening outings. I appreciate it for its small size and the large e-liquid capacity (8.5ml) of its cartridges. I normally use a small power bank for charging when I'm away from home and without having to wait too long. The led light on the bottom of the device turns off when charging is complete and flashes when the battery is low on energy. The pleasure of using nexPOD is amplified by 18 different flavors which are all highly concentrated and all are really good. I normally use the AFC fully wide open to maximize the flavor of some creamy flavors and other frozen fruity flavors, the big thick clouds of vapor complete my satisfaction. There is a particular flavor and it is Caramel Tobacco, it tastes like a delicious blend of creamy vanilla with dark caramel, a delicate honey note and a slightly woody tobacco flavor, with this flavor I like to adjust the AFC system to 50 % and it's a real pleasure! The vape I get with the NexPOD is clean with no splashes, and it is truly flawless and hassle-free. The nic level in the liquid is perfect for those who want to quit smoking and therefore forget about burnt cigarettes. Would I recommend Wotofo NexPOD kit? Definitely yes, I recommend it because it is absolutely the best combination to save money between a refillable mod and disposable cartridges. Plus the flavors of Wotofo are the best I've ever tried!

I would like to thank Wotofoo for sending me this Maxi Kit. I hope this review was helpful for anyone wishing to purchase NexPOD ;.

Thanks for reading.

not DNA brand... their 'safe for USB charging" ended up always the circuit failed for me and had to warranty and it just bricks/glitches again etc and I did nothing wrong and it is known that these circuits fry and are on ebay with the same testimony selling many.

The DNAs DID evenly charge 2 or 3 cells confirmed by escibe and an external nitecore but with just 1 cell it's supposed to be safe for pretty much any mod to USB charge.

For now I'm just looking for small 18650 pocket MOD.

Tanks, I have several small MTL tanks like kayfun clone and then larger RTAs like aromamizer and some sizes in between. aromamizer is too big for the small pocket mod I'm looking to buy but maybe later I'll get a non-DNA dual cell MOD for that for home use and either trust their USB charging if advertised or use the nitecore.

One thing is no leather recommendations please.

so I've been looking and really I don't have much preference except for small pocket size and ease of use but some have like just 1 or 2 buttons but they also have TC etc so I don't want any complicated menu diving or button combinations to memorize.
I basically just vape kanthal small coils at only like 10 watts but I don't like kanthal's slow ramp up time and never got to programming a power curve or anything in escribe nor did I get around to using TC but I have SS clapton and small round wire for that but for now I'm also ok with just something that has just wattage mode for simplicty. I mean these mods some are only like $20 on fasttech so I'm ok with upgrading later and having a backup, but for brands maybe someone's boards are better more reliable etc than others especially if USB charged or other useful features but not overly complicated features because I want to keep it very simple to start. thanks you.

I've been using the Hellvape MD for a couple years and am generally happy with it but looking for something new that's best used right on the border of MTL and RDL. For reference, I use the MD with the airflow set to 5 (1.8mm diameter) and with the wide-bore drip tip. Usual build is a 28g/40g fused clapton at 30W with TC, or 26.5W on wattage mode if TC is being finicky.

The MD has been by far my favorite RTA up to now for the airflow and flavor. Previously I was using the Vapefly Galaxies wide open and before that the Digiflavor Siren v2 also wide open. For both I'd have preferred if they had just a tad more airflow.

Hoping I can get some feedback from vapors with similar preferences. At least 4mL is preferred and must be leak-proof enough for all day pocket carry including while seated.

Edit: current thoughts on RTAs I'm looking at are as follows.

* Aromamizer Lite v1.5 - this one looks great but impossible to buy new as far as I can tell
* Aromamizer MTL Classic - looks good but I wish its capacity was a bit more than 3.5mL
* BP Mods Pioneer - not a fan of the PCTG
* BP Mods Sure - not a fan of the PCTG and bottom o-ring assembly, which reviews indicate is loose
* Vapefly Brunhilde MTL - it's so tall, also not sure how I feel about the coil being so close to the drip tip
* Vapefly Alberich - looks good but I'm not sure how I feel about the bottom o-ring assembly with pocket use

Up To 20% Off! Monday Markdown Hurry Up! Massive Savings!

Coupon Code: DEALS

Ends on: Nov 8th

I was a member here somewhere around 8 yrs ago but darned if I can remember the username and pass, sorry admin.
I farmed and drove a truck most of my life and ended up getting out of touch with a lot of friends. I'm looking forward to catching up with the old members and meeting all the new (to me) ones!
I see the FDA or CDC or both have decided flavors are deadly in select states unless they are produced by Tobacco companies and accompanied by a crappy little throwaway device. If anyone has a URL handy where I could get a look at the studies done by FDA, CDC, and NIH proving this stuff is toxic when inhaled I would really appreciate that.
Thanks for being here, I missed you all!

Dear wholesale customers,

Here comes Healthcabin new round of brand discount – October brand discount round 2 for you to save more on different vape-brand products.

Take the chance to join us while offer lasts~

Details​

• Discount: 2%-3% OFF for selected 10 hot brands
• Date: 24th – 30th OCT, 2022(-0600 GMT)
• Wholesale ONLY
• No coupon code required, total discount amount can be found at your shopping cart.

Promotion Brand

VAPORESSO Deals​

A. Selected Items 10% OFF

A 10% OFF coupon code has been created for selected items, click here for more details.

Promotion Products

• XROS Series
• LUXE X
• Zero S

Discounts

• Coupon code: VP10
• Date: 24th OCT – 7th Nov, 2022(-0600 GMT)
• Wholesale Only

B. Zero 2 – Buy 1 Get 2 Kits

Vaporesso also released another promotion for the Zero 2 Kit – Buy 1 get 2 standard kits. Check it here.

With any questions, feel free to contact your account manager.

Please view the October Brand Discount – Round 2 here.

Hi, Freemaxers! How do you like the Freemax Galex and Galex Nano Kit? And do you want to get them for free? Now the chance comes! Please join in the theme activity of “What Is Your Lifestyle At Night?”, you will have a chance to win the two types of Galex Series Pod System Kits.

How to Join?
First, please take the interesting test on the Freemax official vape website, then you need to download the result and share it on your social media platforms. Moreover, please add hashtag #lifehasmorethanonestyle, follow & tag Freemaxvape. Maybe you are the lucky one!

How many winners will be chosen?
5 Winners will be picked to win 1pc Galex Kit & 1pc Galex Nano.

Time Duration: 2022/10/21 - 2022/11/4

Please click here to join the activity: Win Galex Pod System | FREE MAX. FLAVOR MAX.

Yachtvape x Mike Vapes ECLIPSE 24mm RTA

Having watched @MikeVapes's vids waaay back when I FIRST started vaping, and liking his style, I was damned curious to see what he and Yacht Vape came up with. As is often the case, this review was NOT sponsored by anyone, except ME, so buckle up. #NoTeamFree....Today

**Designed by Mike Vapes, and manufactured by Yacht Vape**, the Eclipse was billed as a "5 Star Flavor Banger". Let's just see about that.


**Yachtvape ECLIPSE 24mm RTA Features:**

* Collaboration Between Yachtvape and Mike Vapes
* 24mm Diameter
* 3.5mL Bubble Glass
* Optional 2mL Straight Glass
* Pyrex Glass Reinforcement
* Stainless Steel Tank Construction
* Threaded Top Fill System
* Postless Build Deck - 4 Deck Based Terminals
* Single Coil Configuration
* Side Secured via Hexagon Screws
* Peek Insulator
* Dual Bottom Airflow Control Ring
* Threaded 510 Connection
* Available in Stainless Steel, Matte Black, Gunmetal, Matte Stainless Steel, Gold, and Rainbow

**What's Included:**

* 1 Eclipse RTA
* 1 0.3ohm Prebuilt Coil
* 1 510 Drip Tip Adapter
* 1 Cotton
* 1 Bubble Glass
* 1 User Manual
* 1 Extra 810 Drip Tip
* 1 Coil Lead Guide
* 1 Accessory Bag
* 1 User Manual

The component overview appeared to be fairly standard, and had a total of 5 parts.




As a 24mm x 30/37mm tank with plenty of extras, I was curious to see how it fared, and if it was the compact flavor chucker it claimed to be.




Let's get INTO it !!!!




Nicely packaged with an outer sleeve, and 2 piece box ...




A fairly typical presentation, along with the extras box ..




Never leave home without your multi-language fold out poster user's manual ...




Lots of goodies thrown in, including gaskets/o-rings, grub screws, 810 wide bore tip, 510 adapter, and allen key ....




But that wasn't all, as Yacht Vape also threw in a bigger 3.5ml bubble glass (straight glass installed was 2ml), a 3.0mm I.D. coil, shoelace cotton wick, and a coil cutting guide ...




When disassembling for pre-review cleaning, the 5 parts looked well thought out, machined, and o-ringed where necessary ...

My fairly new gpriv 4 indicates batteries are charging when not pluuged in to the charger. New 18650 batteries installed. Any advice is appreciated....

Hello everyone I'd like to introduce you to the VapeSnake!

Connect your non-usb DNA device to Escribe, set your boost, warmth, make custom boot logos, add a puff counter and much more!

Limited time free US Shipping!

Go to www.VapeSnake.shop or Message me to order now!

Tutorial:
Login to view embedded media

Hello fellow ECF members.

I'd like to discuss the Innokin Coolfire Z60 Kit that was sent to me by Innokin for the purpose of providing a fair and honest review.

As I already mentioned before, from my experience, Innokin devices almost never fail to deliver great quality for a reasonable price. Also they always try to provide something innovative to a new model they release so it's always a pleasure to review the new devices from this brand. You can check my previous reviews for the Innokin products - Klypse, Sceptre 2 and GoZee

Let's see what we have with this new Z60 Kit.
An intro from Innokin:

The Coolfire Z60 kit combines Innokin’s cutting edge technology with the all-new Zlide Top tank. It comes with 60W of variable power,
all-day battery life, 4th gen vape tech, top airflow and DuoPrime coils.

Sounds pretty interesting. Let's see the options first.

Colour options available:


• Purple
• Blue
• Gunmetal
• Stainless Steel
• Black
• Pink
• Red
The frame of the Coolfire Z60 comes in 2 colors; Black and Stainless Steel while the Zlide Top Tank comes in 4 colors that match the frame of the Coolfire Z60; Silver Grey, Gunmetal, Blue and Black.


Key Stats:

• Construction: Zinc Alloy
• Dimensions: 75mm x 36.6mm x 27.2mm (without tank)
• Weight: 129 grams
• Input Voltage: 3.2V – 4.2V
• Charging: Type-C USB 5V/1.7A
• Resistance Range: 0.2 – 3.5 ohms
• Output Wattage: 6-60W
• Output Voltage: 1V-7.5V
• Output Mode: Variable Wattage/Voltage, Coil+ and Coil Refresh
• Output Current: 17.5A
• Battery Specification: Internal 2500mAh 3.7V 9.25Wh
• Chipset: 4th Gen Technology
• Display: 0.96inch OLED Color Screen
• Tank compatibility: 26mm (27mm max)
• Cut-Off Time: 3-18 seconds adjustable
• Battery Cut-Off Switch
• 2 Coils in a package including the preinstalled 0.6 ohm one

Short Description and Key Features:

The Innokin Coolfire Z60 kit is a newest addition to a famous Coolfire Series by Innokin. It's a Mouth-To-Lung (MTL) and Restricted-Direct-To-Lung (RDL) device, powered by an internal 2500mAh capacity battery firing up to 60W. It’s essentially a variable wattage/variable voltage mod but with the inclusion of Coil+ and Refresh technology.

Coil+ mode will automatically pulse your coil after each vape, effectively clearing residue and drawing e-liquid to the coil in readiness for your next draw. Refresh will revitalize your coil by heating it to 40% of your set vaping wattage to help saturate your wick.
This technology has proven to prolongue the live of your coils and bring even more pleasurable experience while vaping.

• 4th generation vape technology - Coil+ and Refresh modes extend coil life, reduce residue build up and ensure vivid flavour production for a longer time.
• Zlide Top Tank, mess-free refills - The brand-new look Zlide Top features top airflow, eliminating all leaks. The redesigned airflow system allows for greater control than ever before.
• DuoPrime coils - DuoPrime coil technology arrives to the Z-coil line. The Zlide Top tank is pre-installed with our new 0.6Ω DuoPrime Z-coil, with better saturation, flavour production and coil longevity.
• All-day battery life - The Coolfire Z60 is equipped with a 2500mAh internal battery and USB-C charging. That means all-day battery life and reliable rapid charging.
• Battery master switch - The Coolfire Z60’s master which allows you to fully shut off the device at any time.
• Compatible with all Z-coils - The Zlide Top tank is compatible with all our industry-leading Z-coils, delivering a huge range of vaping experiences.

Let's check the Real Coolfire Z60 kit (I actually received 2 of them, thanks Innokin):



As usual we see a recyclable packaging Innokin is using for its latest devices. It may not look as luxury as some other fancy packages but extra points for the environment protection

On the back you have all the needed info - QR code and authenticity check.

Opening the box:

Stylish black colour with the tank matching the device.
Btw, the package looked like that when I received it. It was preopened. Seems like the customs inspector thought for a long time whether to keep the device, but decided that I would still need it more and shoved all the parts back in, tearing it a little inside. Fortunately, the device and parts were not damaged. Thanks dude If there's a chance you might reed this review and you are a smoker, I really hope you will switch to vaping. Not by stilling the devices from the packs you are checking though, go to a brand store like
for example Innokin Store and get yourself a device.



Let's see what was inside the box:

Packing List:

1x Coolfire Z60 Mod
1x Zlide Top Tank (3ml)
1x Z-Coil 0.3Ω
1x Z-Coil 0.6Ω (pre-installed)
1x Replacement glass (4.5ml)
1x Spare Drip Tip
1x Set of O-rings
1x USB-C cable
1x User Manual
1x Warnings

Another interesting Feature - on/off on the bottom of the device:
Good luck to those who will not check the details and will keep on trying to turn it on with the fire botton

Innokin Zlide Top Tank Specs:
Dimensions: 25 x 51mm
Capacity: 3ml (there are options with 2, 3 and 4.5ml tanks)
Liquid refill: from above (with a sliding top fill option)
Airflow: From above
Z-Coil 0.3Ω (30-40W) (compatible with all Z coils)
Duo Prime Z-Coil 0.6Ω (9-13W) (pre-installed)

Duo Prime Z coil is one of the main features of this kit.
Let's check what is it all about:
Duo Prime coil which works by implanting an outer layer of mesh between the wicking material and inner coil. The outer layer of mesh is of a higher resistance than the inner coil. This means it heats slowly, but this heat and structural change draws e-liquid into the wicking material and inner coil rapidly. Unlike traditional coils, DuoPrime coils maintain full saturation between every vape. This dramatically impacts coil performance and longevity.
I've tested the "withstanding longer and more frequent puffs" and I can tell that it really holds well with the longer and more frequent puffs. Device is getting a bit hot after some time though.

Remember to saturate the inside of the coil before the first use. Refilling can be done via sliding the top part of the tank.

Tank itself is pretty compact and light and easy to use.
Compared to the Innokin Klypse:

A bit longer and slightly wider than Klypse.
Still a very compact kit and it holds in a hand pretty well.
Control is achieved by the 4th generation chipset and the User Interface (UI) is a 0.96inch OLED colored display. It’s located on the front of the Coolfire Z60 in-between the fire button and the +/ – buttons on a black matt transparent finger plate.
Fire button is just a bit loose but overall, buttons are good and easy to use.

Pros:
Reasonable price (around £45 in the UK)
New technologies: 4th gen chipset, Coil+ and Refresh technology and the Duo Prime Z Coil
Nice design
Quality build
Easy to operate
Master bottom on/off switch
True 2500mAh built-in battery with quick Type-c charging
One of the best tanks - Zlide Top - included in the kit

Cons:
Device gets fairly warm when doing series of longer puffs and while charging
I've got few spit-backs while testing

My Final Thoughts on Z60 kit:
Innokin didn't fail to deliver the improved Coolfire family member with Z60 Kit.
It is packed with the new technologies/upgrades and cool features.
One of the best tanks compatible with all Z coils is also included in the kit. They surely complement one another with the device.
As a result we have a modern, good looking, compact vaping kit at a reasonable price.

Overall rank 8.5/10 by Dreamvaper.
Can recommend this device

Thanks for reading

Hi there fellow vaperinos.

Weekend with time to spare so lets get started with today's review.
Following my usual MO i will get us started with some pics that will give you a broad view of the device i will be reviewing today.

Colors



Features



Specs



Charge



Airflow




Contents in the box:

1 x Argus P1 Device

1 x Argus Pod (Empty Cartridge)

1 x ITO-M1 coil (0.7ohm)

1 x ITO-M3 coils (1.2ohm)

1 x Type-C USB Cable

1 x Lanyard

1 x User Manual

Full list of features and specs:

VINCI POD SE

Material: Aluminum Alloy

Output Power: 11-15W

Battery Capacity: Built-in 900mAh

E-liquid Filling: Top Filling

Chip: GENE.TT 2.0

Charging voltage: Type-C fast charge (standing when charging)

Compatible cartridges: The cartridge of VINCI POD SE is fully compatible with VINCI POD, VINCI Q, VINCI POD Royal Edition and Drag Nano 2.

Airflow: The 4-hole air inlet of VINCI POD SE catches sufficient airflow from each direction in balance and ensures a smooth taste .

Leakage Proof: VINCI POD SE adopts multi-layer leakage proof. Integrated Airway Structure greatly improves the air tightness; double rings design upgrades the leakage proof function; condensate isolating room and micropore structure drain the condensate down and isolate it at the bottom.

Anti-bacterial mouthpiece: Antibacterial silver ion mouthpiece with over 99% antibacterial rate enables reassuring vaping experience.

Charging: The Type C charge port on the body side enables the device to stand during charging and avoids abrasion due to improper device placement.


Unboxing and first impressions:

Nice little box with a plastic tray that has a cut out for the little pod to be in and then a layered box in the top that contains the rest of items.
All neatly tucked in and well packaged,spare pod cartridge in its own little baggy which is a nice detail.

Take out the pod mod out of the box and ok this is tiny,i mean i am use to my regular big ol' mod (Jackaroo 100w) so this is like a little toy you get out of one of those Kindeer eggs he he.

But ....dang,this little itsy bitty thing feels like a Sherman tank and it does have some weight to it,despite it being so small but a lot of work got into this little device.


Vaping time:

Recently reviewed another pod mod like device and i struggled a bit with the nic salts so decided to use my regular e-liquid (70/30,6mg nic and flavor wise its Bubblegum/Red Bull/fresh molecules...yeah i know it's weird do not judge me lol)

Since this mod is pretty straight forward (auto draw and no menu) i went ahead and filled the cartridge and let it sit for 15 minutes while i was browsing the internet.
I started with the ITO-M1 coil (0.7ohm) and since i am not a MTL vaper i decided to leave the airflow all the way open.

After 10 or 12 puffs i gotta admit,not bad not bad at all.
Nice hit,good amount of flavor in each puff and a decent cloud,don't get me wrong hit and cloud wise it is not what i am use to but for a device this small to perform that well,that is a pretty good achievement.

With mos pod mods i cycle thru the coils pretty fast and don't use them once i write the review since its just not my vaping style,nothing wrong with the product.
In this case i even ordered some spare coiils,i call this my ''carry'' mod.

With all the stuff i need to do at home its a pain to vape,washing the dishes i need to rinse them hands,dry them out and take a couple of puffs then back to washing the dishes.
Not in this case,thanks to the Lanyard that comes in the box i can do all my chores at home and not have to carry a heavy mod around,that is a huge plus for me at home.

Funny story,pops can't really bend down that much or bend his knees that much so once i week i trim his toenails,did this like 2 days ago and i made him hold the Argus P1.
Clip here,cut there and then i would look up and say puff puff and he would hold the mod up so i could take a quick puff rofl.

Design wise well what can i say,i wish bigger mods looked like this.
I mean wow,love the mix of metal (zinc alloy) with clear plastic (PC) on the side,the bit where the Lanyard is attached goes all the way from the top to the bottom of the mod,golden played tube that you can see thru the PC plastic,looks awesome.

There is no screen on this pod mod but there are 4 lights that serve a double function,lets you know how much battery you have left and it tells you when the device is fully charged.

When using the device this is how the lights let you know how much battery you have left:

One light = 1-25%
two lights = 25-50%
three lights = 51-75%
four lights = 76-100%

When charging the device it will flash from the bottom to the top filling in the lights as it gets charged,once all 4 lights are solid and not blinking you can unplug because this little baby is fully charged.

Coil wise i bought spares of the 0.7 ohm coil,the 1.2 ohm pod wasn't bad but i just got a bit more hit and flavor from the 0.7 ohm coil (airflow always fully open)

Pros:

-Perfect carry around town pod mod
-Superb futuristic design
-Well built with quality materials
-No condensation or leaks after much use

Cons:

-Can't really come up with any,pod mod does its job and then some


Would i recommend this device:

If you're after a small device you can carry around your neck and enjoy MTL vaping this is the one to get.
No fuss with menus or options,full the cartridge,let it sit for awhile so it can properly soak the nectar of of the gods and you're golden.

Thanks to my friends at Voopoo for sending me this product so i could review it,here is the link to their website with more info about this product:


Hope you enjoyed reading my review and thanks for taking the time to give it a look.

Hi, today let's take a look at Hellvape HELL200 Box Mod Kit. I will examine in this Test each of the characteristics that distinguish this item. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Hellvape HELL200 Box Mod Kit; Before starting let's see together some special features indicated by the manufacturer:
1. Ultra light and compact mod
2. Dual 18650 battery with 200W max
3. 0.96 inch color screen
4. Multiple output modes for your choice
5. 5ml / 6.5ml capacity, top filling
6. Adopt the best coil system
7. Suitable for TLC atomizer and Launcher atomizer
8. Suitable for Coil T7-01 / 02 and Coil W8-01 / 02
9. Multiple safety protections for safe use
10. Precision CNC machining and aerospace aluminum material



► Hellvape HELL200 Box Mod Kit; Packaging:
On the front of the two-tone red / black box you can see; the brand (Hellvape), the image of the kit and its name (Hell 200 Mod Kit). On the back you can read; the content, the manufacturer's support addresses, barcode, scratch & check, color of this sample, trademarks and logos required by law. On the remaining sides of the box are; a stylized image of the kit and the words "Evolve Your Vaping Genius".





► Hellvape HELL200 Box Mod Kit; Packing List:
• 1 * Hell 200 BOX MOD
• 1 * TLC Sub-Ohm Tank
• 1 * Replacement Bubble Glass
• 1 * Mesh Coil T7-01 KA1 0.15Ω Range 60-70W
• 1 * Mesh Coil T7-02 KA1 02Ω Range 50-60W
• 1 * Type-C cable
• 1 * Oring bag and gaskets
• 1 * Warranty Card
• 1 * User Manual



► Hellvape HELL200 Box Mod Kit; Specifications:
• Dimensions of the Mod: 80.0 * 43.0 * 35.5mm
• Net weight: 86g
• Battery: Dual 18650 (not included)
• Power range: 5-200W
• Output voltage: 0.5-12V
• Charging voltage: Type C 5V / 1.5A
• Output mode: VW / Bypass / VPC / TC
• Screen: 0.96 inch colors
• Overload protection
• Over discharge protection
• Short circuit protection
• Reverse polarity protection
• Overheating protection
• 10S Cut-Off protection



► Hellvape HELL200 Box Mod Kit; Available colours:
• Black
• Gunmetal
• Black silver



► Hellvape HELL200 Box Mod Kit; First Impressions:
Hellvape is a leading company in the production of Sub-ohm Tank, RTA, RDA and RDTA, among them there are several high potential vaporizers that to be exploited worthily require MODs of great power and with at least two batteries. A Hellvape Dual Battery Mod (like this one) has been waiting for it for a long time and finally now it's here! The Kit includes a Mod with a classic design that immediately impressed me for the low weight and the excellent degree of finishes, there is also an innovative Tank with replacement of TLC Coils directly from above and even with the tank full of liquid! However, as I said before, the 200W Mod is able to host and manage all Hellvape vaporizers in the best possible way, even the wildest and most unleashed ones.



In the image below you can see the HELL200 Dual battery with its TLC Tank, The tank is large, it has a diameter of 28mm, but since the TLC Tank is connected downwards, its base has a width of only 25mm and this allows to beautifully adapt it to another great Hellvape Box Mod which is the Arez 120 with single 21700 battery.



► Hellvape HELL200 Box Mod Kit; How it is made:
Hellvape has really done a good job, used high quality materials such as lightweight aerospace grade aluminum of exceptional strength to withstand wear and corrosion, the Mod has been carefully CNC machined to every little detail. There are 3 colors of choice for this Kit and Hellvape sent me 2! They are both beautiful, one is gunmetal including the TLC tank, and the other is silver with beautiful shades of black, the tank of this version is completely silver. The triangular form factor with chamfered fittings is truly classic, but offers great ergonomics. There are no decorations or large intrusive writings, the only decoration is on the back (handle) and is represented by two deep vertical grooves, below them there is a small white writing "Hell 200". The front is narrow and has a built-in bridge in a protected position. The keys have a metallic texture and excellent tactile feedback, in the center there is the 0.96 "colored display with bright colors, the display shows all useful information such as; Indication of the current mode, graphic level of charge of the cells, power set, Ohm, Volt Puff time, Pufff counter.






► Hellvape HELL200 Box Mod Kit; Operation Guide:
• 1. Power On / Off: Press the Fire button 5 times in 2S to turn the device on or off.
• 2. Mode settings: In the main interface, press the Fire button 3 times within 2S to enter the mode settings; press "+" / "-" buttons to choose between POWER / TC-NI / TC-SS / TC-TI / TC-TCR / VPC / BYPASS modes, press and hold the Fire button for 1S to confirm and exit , or the device will automatically save the settings and if no other operations are performed within 5S it will automatically exit and return to the main interface.
• 3. Power Mode: Press the "+" / "-" buttons to adjust the power, the power will be raised / lowered by 0.5W at a time, long press the "+" / "-" buttons, the power will be raised / lowered quickly by 1W at a time.
• 4. TC mode: Press "+" / "-" buttons to adjust the temperature between 200 ° F-650 ° F / 100 ℃ -345 ℃
• 5. VPC mode: Press the Fire button 3 times quickly to enter the mode setting status, then press the Fire button to select P1 / P2 / P3 / P4 and press the "+" / "-" buttons to adjust the wattage, then press the Fire button for 1S, or confirm the settings by not pressing anything for 5S. When vaping, the output power for the first 4S is based on P1-P4, while between 5-10S the output power is based on P4.
• 6. Bypass mode: In bypass mode, the output voltage is 4.15V (maximum output power and maximum output current are self-adjusting).
• 7. Lock / unlock buttons: To lock / unlock the "+" and "-" buttons. Simultaneously press the "+" / "-" buttons
• 8. Clear Puff: In any output mode (except VPC mode), quickly press the Fire button 3 times, then press the Fire button to select the "P" setting and press the "-" button to clear the number by Puff.
• 9. Brightness Adjustment: Long press the Fire button and "-" button at the same time to dim the screen. Long press the Fire button and the "+" button to increase the screen brightness.



► Hellvape HELL200 Box Mod Kit; 510 thread:
The Hell200's top base features 3 French screws and a small steel cup which is cleverly raised above the base to allow you to safely screw on / off the tank without damaging the paint. The thread is smooth and the pin is gold plated and spring loaded. The space to insert giant atomizers is considerable and among these the gigantic Hellvape S30 RDTA also finds a convenient location!



► Hellvape HELL200 Box Mod Kit; Battery compartment:
The lower base of Hell200 guarantees great stability to the Mod, it also has 6 safety vent holes for the cells. The opening mechanism is controlled by a sliding button which is positioned inside a part not exposed to shocks. When you slide the button, the spring loaded flap opens snappy and quickly, you can now insert your 18650 cells following the correct direction of insertion which is marked by the symbols "+ and -" above the gold plate. When you close the door you have to slide the button, and a sturdy steel tab will ensure you a perfect closure!





► Hellvape TLC Sub-Ohm Tank:
To worthily accompany the HELL200 Mod there was a need for a sturdy tank and able to support the Vaping DL and RDL so Hellvape has designed this tank equipped with 510 thread with 3 large slots for adjusting the airflow from the bottom to the top. high that are able to maximize performance.





► Hellvape TLC Sub-Ohm Tank; Top Loading Coil System:
I have been collaborating with Hellvape and Wirice for a long time and I was one of the first to touch the "Top Loading Coil System" first hand, it is a fantastic technology of quick change of the resistance from the top, leak proof, even with a tank full of liquid! According to a lot of feedback collected by the two companies through its customers, it would turn out that a boring problem for those who use tanks with replaceable heads is to install and replace the coil. For this reason Hellvape took its cue from the previous Launcher Sub-ohm Tank and Launcher Mini MTL. I was favorably impressed the first time and I must say that I was expecting this system from Hellvape applied to a new Sub-ohm tank, and here it is!



The tank essentially consists of; a pyrex glass, an upper base with two large slots for liquid refilling, a knurled top cap and a one-piece structure that also includes the cylinder that houses the resistance with the spring loaded system. The AFC base is equipped with knurls to facilitate adjustment of the AFC system. The Drip-Tip has two silicone rings that fit inside the removable pin. All easily removable for periodic cleaning operations.



Without removing the Top-Cap, just unscrew the base of the Drip-Tip and turn the Tank over, letting the coil come out directly, even with the tank full of liquid and without spilling a drop. Then all you have to do is drop the new Coil from above directly into the TLC Sub-Ohm Tank, this makes operations easier and faster than ever. The inside of the Tank is spring loaded and this mechanism (when the base of the Drip-Tip is unscrewed) activates some bulkheads that close the Tank's feed holes, preventing any loss of liquid. Then with light pressure you can insert the resistance from the narrow side with the widest part facing up and simply screw the base of the driptip back to lock the resistance and the liquid supply holes will open.





► Hellvape TLC Sub-Ohm Tank; TOP Refil:
The top cap has knurls for a better finger grip on the surface and a sliding 1/4 turn thread. The filling operation is easy thanks to two large filling slots, you can insert up to 5ml of e-liquid. If you like it, you can install the convex glass present in the package and TLC Sub-Ohm Tank can hold up to 6.5ml of e-liquid.



► Hellvape TLC Coils:
Hellvape always proves generous and on the occasion of the test of this kit sent me two packs of the new TLC coils T7-01 and T7-02. The structure of these coils has recently been updated with a higher thickness of the nets, moreover the breathable material uses a double layer of 100% natural cotton. According to Hellvape, this update provides 70% durability and flavor improvements. In the second image below you can see the whole range of coils compatible with TLC Sub-Ohm Tank including the W801 and W802 which were standard on the Launcher Tank.





► Hellvape HELL200 Box Mod Kit; Vaping Test and Final Impressions:
I really liked this kit a lot, starting with the Mod which is light and really sturdy. The finishes are excellent, the Mod has an attractive appearance without unnecessary and flashy decorations and it carries quite well. The chipset includes many vaping modes, is accurate in reading the coils and manages the battery life well. TLC sub-ohm Tank is truly innovative to improve user feedback towards the world of vape. It is also a perfect tank for making some nice clouds full of flavor. For the Svapo test I used a tropical aroma mixed with VG / PG 70:30 base.

• Mesh Coil T7-01 KA1 0.15Ω Range 60-70W:
The resistance starts well immediately and without strange flavors already from 40W, however I immediately set the minimum power which is 60W. The flavor is perceived immediately and is very good and super concentrated the vapor clouds are among the thickest and densest I've ever seen with a sub-ohm tank! The liquid consumption is considerable, so I soon installed the bubble glass on my silver colored TLC.

• Mesh Coil T7-02 KA1 02Ω Range 50-60W:
The behavior of this Coil is not very different from the previous one. The performances are also impressive in this case, perhaps this is a slightly less thirsty coil for e-liquid so I installed it on my gunmetal TLC Tank with 5ml pyrex. This TLC tank really impressed me, I conclude and thank you by leaving you my Highlights regarding the Mod and the Tank.

• Pleasant Mod aesthetics with high build quality.
• Lightweight and sturdy mod.
• Precise and feature rich chipset
• The Initiative Top Loading Coil System (T.L.C) of the tank is a real step forward and simplifies coil changing operations.
• Optimal AFC adjustment for DL / RDL.
• Updated Mesh Coils of the T7 series among the best on the market for DL / RDL
• No liquid loss.

I would like to thank Hellvape for providing me with the kit. I hope this review was useful for anyone who wants to buy HELL200 Box Mod Kit.

Thanks for reading.

The red/black Topside Dual I bought recently is not working correctly. It won’t read the battery level1 in the A battery slot. Doesn’t matter which manufacturer but it was ordered on 8/30 but I can’t remember when it actually got here. I contacted Health Cabin via email yesterday and received a very nice return email.

Just like all the other returns, I need photos of it showing no battery and a short video. Seems to be the way of it now so no big deal. So I’ll soon find out if customer service is any good from Health Cabin.

I don’t even like this mod and plan on selling it and the blue/black one too.