Hi,

Been a long time since I used this forum, but I need some help and advice please.......

So basically I used the Aspire Revvo Skystar mod for about 3 years or so and it was great but I had issues with that mod and the arc coils......

Basically what happened with that was coils I got from amazon and some proper e cig shops over the last few years for it just was dud when I primed them etc. I always primed the coils and let it sit upside down for 10 mins...... This did not work all the time and I kept getting burnt taste and no flavour when I replaced the coils and this kept happening and sometimes even in the space of 30 mins I replaced coil put a new one in and primed it and waited for 10 mins, reduced power to low Watts and bang burnt taste. So then switched coil again a few mins after putting that new coil in and again the coil did the exact same thing. This happened so often. And that is why today I then went and bought a brand new mod and tank which I will explain later in my post.

Another issue I had with the Aspire Revvo Skystar mod was the screen was a touchscreen and I actually had to buy a new mod replacement exactly the same 2 times, so I was on my third revvo skystar mod, this 3rd one I only had for like 2 months. Reason why I had to replace that mod 2 more times was the touchscreen DIED. Totally DIED so I was unable to actually change any settings or the watts or the time etc etc. It was really annoying. But now I am having issues with the coils again and no flavour and burnt taste. Every coil I put into it is just not working and giving burnt taste and no flavour. So now I just gave up and just went and bought a brand new mod and again having the exact same issue with this new mod and coils too............

So now because of that it made me just go to a local vape shop and bought a brand new kit. The new mod tank I got was the GeekVape L200 and it has a Zeus Tank with Z1 coils...... I bought a pack of 5 replacement coils for it too.

But now I am not getting any flavour with this mod what so ever and I am getting the same burnt dry taste and again NO flavour. I am tearing my hair out here. Cos I am getting no flavour what ever I do. I then switched the coil that was pre installed with this mod I bought today with the second one it came with in the box. The one that was pre-installed said it should have been vaped at 70-80 watts. But when I tried it at that watts it was totally burnt taste so I lowered the watts and it stopped the burn taste but there is no flavour what so ever yet I get a lot of clouds.......

So I then switched it to the second coil that is the Z 0.25ohm one and that says it is 45-57watts.... But again I primed it and again I got burnt taste and no flavour........
I have not opened the pack of 5 coils yet because I do not want to keep burning them out. Is there something that I am doing wrong. Is it my juice I am using?

In case people wants to know my juice here is the info.

I make my own juice. I use a base mix of 80VG/20PG then add 10ml 100% VG 18mg nic shot to a 60ml bottle so 10ml nic shot and 50ml is base mix. I shake that well each time and before I use it I let it sit for at least 1 or 2 days. Then I use 30mil bottle and add about 20ml of the mix into the 30ml bottle from the 60ml bottle and then I add the flavour into the 30ml bottle. I usually just add like 84 drops of flavour. I am using capella flavours.......

So that is basically my setup and my issues. So if anyone can please help and advice me on why or what is wrong or what I am doing wrong then please kindly help. I would greatly appreciate it a lot.
I am losing my sanity trying to get a damn vape that has flavour right now its now been 2 days and I have basically been trying and wasting loads of coils and it is just not making any difference what so ever.

Thanks in advance

RJ

SUPER CHRISTMAS SALE IS LIVE NOW!!!!!!!!!!!
USE COUPON CODE (CS15) TO GRAB 15% DISCOUNT STOREWIDE TILL 25th DEC, 2022

Our Brands​

• Smok
• Geekvape
• Vaporesso
• Voopoo
• Jam Monster
• Uwell
• Air Factory
• Humble Juice Co.
• Candy King and more

Once again I say hello and welcome to another vape review, today's review sample was sent to me from Voopoo and is the newest edition as of today's date to the Drag family of devices. The Drag 4 is a full sized box mod that is a dual 18650 with a maximum power output of 177 watts with 4 power modes including TC. Featured with the Drag 4 is the Uforce L Sub Ohm tank that takes all coils in the PNP lineup with 2 newly styled PNP coils Voopoo calls dual in one. There's a lot to cover with this kit including a new locking switch that is multifunctional in it's locking features so lets get to know the Drag 4 Kit with the Uforce L tank before my review of this kit.





COLOR CHOICES


WOOD



RESIN




IN THE BOX


* 1pc VOOPOO Drag 4 Device

* 1pc VOOPOO UFORCE-L Tank (4ml)

* 1pc VOOPOO PnP-TW15 (0.15ohm)

* 1pc VOOPOO PnP-TW20 (0.2ohm)

* 1pc Bubble Glass Tube (5.5ml)

* 1pc Silicon Rubber Pack

* 1pc Type-C Cable

* 1pc User Manual




SPECIFICATIONS AND PARAMETERS





FEATURES


* Dual 18650 batteries with 177W max

* ECO Mode and 5V/3A Type-C charging

* New TC mode to better match heating wire

* Multiple-function switch to define QS lock

* New DIY UI design to define your style

* Replaceable and durable magnetic battery cover

* Designed with 3-hole top airflow/360° adjustable airflow

* Top air inlet to prevent leakage effectively

* 4ml/5.5ml capacity, easy top filling system

* Innovative 510 base with heating

* Fit for all PnP Coils including RBA Coil

* Contains New PnP Coil 0.15Ω/0.2Ω with Dual In One Tech


TRIPLE AIRFLOW - ( 3 SLOTS WITH DIFFUSERS )





TOP FILL





HEAT SINKS INCLUDED FOR A BETTER VAPE





NEW COILS WITH EVEN BETTER FLAVOR





COMPATIBLE WITH ALL PNP COILS

Hi there!!

I´m back to vaping and I would like to get information and help other ppl if possible.

Diego

Hey there,

I´m back vaping and I have some problems to find a good way to vape without "burning" coils.

I am using the mod TopSide Dual (Bottom feeder) with RDA dual coil.

I have been using 0.1ohm dual with 2 SONY VTC6 but I can´t get the power that the build needs and those coils are gone in 4 days use.

For that I am currently using mono coil 0,17ohm with SONY VTC6.

In order to use again a low ohm build (0,1 / 0,11 / 0,12), which batteries could I use and what is a good AMP/Watts/V power to use them safe?
I am thinking about SONY VTC5.

Thanks in advance,

Hello, friends. DOVPO's latest Dovpo MVP 220W Kit; it's based on the much-loved MVV 2 Box Mod with up to 220W of power. The MVP 220W Box Mod inherits the clean design and lightweight battery door of the MVV 2 Box Mod, but has a 0.96" TDT color display that shows power, resistance, and other information.

Features:
Dual High-Amp 18650 Batteries – Not Included
Wattage Output Range: 5-220W
Zinc-Alloy Chassis Construction
Intuitive Firing Button
0.96″ TFT Screen
Two Adjustment Buttons
Magnetic Battery Cover
Threaded 510 Connection
Type-C USB Port

The MVP 220W Box Mod supports different modes: power, voltage and Temperature modes (including Temp NI, Temp PI and Temp SS). You can easily switch to different modes by clicking the "+" or "-" button in the menu interface.

Also, the MVP 220W kit has the new DOVPO DNP vest! Try DOPO MVP today in vape store online: Dovpo MVP Vape Kit 220W with DnP Pod Tank

Other kits we recommend:

The dovpo mvp kit is a new product created by dovpo, which is a combination of mvp mod and dnp pod tank. A 0.96" TDT screen is used on the side of the device, which can clearly show you data such as power, resistance and power. Provides you with dual 18650 batteries for power supply, with a maximum power of 220W.

MVP Kit is able to provide you with rich cloud and rich taste. The six protection modes of Timeout Protection, Short-circuit Protection, High Temperature Protection, Low Power Protection, No-cartridge Protection and Overcharge Protection can further guarantee the safety of the device.

Dovpo mvp mod features more personalized characters and animal patterns, fashionable and special. The zinc alloy material is not only wear-resistant and drop-resistant but also very textured. The 5.5ml DNP Pod Tank is tightly connected to the mod through 510 threads, and the adjustable airflow system can also make it easier to customize the inhalation method. The considerable large capacity can basically meet your smoking needs for two days.


You can choose the vapes to buy, and more abundant electronic cigarette products are also provided for you here. Absolutely worthy of your trust.

You may also like:
drag 4 uk
argus p1

The lost vape ursa nano art kit adopts transparent PC construction and has 6 dynamic and vibrant eye-absorbing colours for you to choose from. The carefully drawn pattern on the shell is very eye-catching and adds highlights to your outfit decoration. The overall body is small and slim, pocket-friendly, and convenient for you to carry around.

In addition, this pod kit is also very good at preventing oil spills and is compatible with Ursa cartridges. The system of oil intake from the side oil inlet can make you use it more safely and conveniently. The built-in 800mAh battery can provide all-day battery life and plenty of power for your vape experience. When the power is exhausted, you only need to connect it to the type-c charging interface at the bottom, and it can continue to provide you with vape services. If you are an MTL vaping user, I believe it will definitely give you the best user experience.

The shell made of transparent material is not only stylish and attractive but also convenient to observe the capacity of the liquid and the internal state of the coil. The internal capacity is 2.5ml, which is suitable for beginners or simple draw-active. Auto-draw activated system allows you to enjoy vaping without manual operation.

As the best online vape store uk, we have also prepared more (best vapes 2022) and discount activities for you, you can click on the link to participate in the selection.

Sincerely recommend the following products for you:
lost vape thelema mini kit
ak 5500

Check out the Lost Vape URSA Nano Art 18W Pod Kit, offering a rechargeable 800mAh, 5-18W output range, and satisfying vapor from the UB Mini Coil Series. Adopting a transparent chassis, the URSA Nano Art Pod System is perfect for those that love this type of styling, similar to the Lost Vape Orion Art Pod System. In addition, the URSA Nano Art 18W Pod System relies on a draw-activated firing mechanism, eliminating the necessity of adjustment or operational buttons. Furthermore, the Lost Vape URSA Nano Pod System is equipped with ann integrated 800mAh battery, rechargeable via Type-C Port found on the base of the device. Holding up to 2.5mL within the empty URSA cartridge, the URSA Nano Art relies on the Lost Vape UB Mini S Coil Series to form delicious clouds of flavored vapor.

Lost Vape Ursa Kit is decorated with a change color relying on the light and angle you can see, such as geometric, gridded and streamlined patterns covered at front and back, sitting comfortable and ultra-portable. With looks and technology, it promotes itself by the goal of flavors and cloud that coupled with the adjustable airflow control button, allowing you to personalize your MTL style that you can. As mentioned, Ursa Nano provides a 2.5ml vape juice capacity and matches most of the nic salts to purse the good throat hit for the veterans. According to consistently and countless tests, the ergonomic and sleek drip tip is a closed unit with the structure of stemming your e-liquid and has a clean hand. To offer minimal fuss and a maximum flavor, it is equipped with two resistant coils for blowing humongous vapor and exciting sweetness.

Lost Vape Ursa Nano Art goes had with the all-in-one pod and is powered by 800mAh built-in battery, vaping last all day is a piece of the pie. The power source depends on a type-c connection, for a single charge, you will never worry about losing power. Aside from that, it maintains 18W maximum output and fires rapidly by the draw-activated ignition, delivering a hassle-free experience. Smart charging indication is another key factor that shows the battery levels.

More Details of Lost Vape Ursa Nano Art:
Battery Capacity: Built-In 800mAh
Wattage Range: 5-18W
Voltage Range: 3.2-4.2V
Resistance Range: 0.8-1.0ohm
Chassis Material: PCTG + Silicone
Charging: Type-C Port
Operation: Draw-Activated
Pod Series: URSA Nano
Fill System: Side Fill System
Pod Material: PCTG
Pod Capacity: 2.5mL
Pod Connection: Magnetic Pod Connection
Coil Installation: Press-Fit Connection
Coil Support: UB Coil Series
Compatible with URSA Cartridges



Recommended products:
elf bar flavors
bocree 6500

Dear valued customers,

Lost Vape has just released a new member of their Centaurus series – M200 Mod, features dual-side changeable face panel.

Wanna test it for free? Here is the chance. Healthcabin teamed up with Lost Vape is here to bring you guys M200 Mod giveaway, with 5 winners in total, ends on 12th Dec. Take the chance to join us and win the brand new mod home!

Prize:

Lost Vape Centaurus M200 Mod – 5 Winners
*One of the colors will be shipped out randomly if you are lucky to win!

About Lost Vape Centaurus M200 Mod
The Centaurus M200 innovates the way you look at mods. The 200W dual 18650 powered box mod with a 2A Type-c incorporates an innovative 3-in-1 jog dial control with a mechanic On / Off toggle switch is the perfect way to make vapers life easy . Featuring dual-side changeable face panel and 26mm seamless squicle aircraft-grade aluminum alloy body framing weighing just 150 + g for toughness and lightness.

Join & Win​

Finish the tasks below and win Lost Vape Centaurus M200 Mod home easily. Good luck to you all!!

If you cannot load the contest table below, please click here to join.

Please click here to join: HealthCabin Giveaway or Lost Vape Centaurus M200 Mod Giveaway | HealthCabin

Well, I know the Aegis max 100 does TCR for Kanthal. Is an Aegis Max 100 a Mechanical Device? But more importantly what is the general TCR of a Kanthal coil if there be an answer in general.

Ok so Eliquid is expensive we all know that. So, I decided to try my hand at mixing. I bought 1 gallon of nic base solution. It's supposed to be 10/90 vg pg and 6mg/ml. Well I got I instantly mixed a bottle of each flavor I bought. Then I decided to throw some of the solution on my rda and hit. I hit it 3 times and I got the worse nic rush ever man. I mean I felt high for 3 hours. It scared me. Now I didn't shake the jug before doing this. So my question is can nicotine separate out of liquid like that? Or did they just give me a solution with to much nic? Cuz I'm tellin you the hit I took felt like pure nic. I thought I was gonna have to go to the hospital.

Dec 14-10am PST time, XROS 3 Global Online jointed Launching Event with Matt from SMM and Grimm Green! Please stay tuned!
Please check the following link to register online:

Reset a password long forgotten. Seeing what's left of the old place...

DnP Pod Tank is the first pod tank of DOVPO. It comes with elegant and classic appearance design. It is easy to use for both novice and masters with simple operation. Dovpo Dnp Pod Tank has 5.5ml large e-liquid capacity, you can refill it from bottom. It also features dual air intake holes & smooth airflow. Two DnP Coils are included.



Product Size: 27.9*48.1mm
E-liquid Capacity: 5.5ml
Resistance: DnP DM-1 0.15ohm(60-80W), DnP DM-3 0.3ohm(32-40W)
Filling Type: Bottom filling
...

Click here for more:

DnP Pod Tank: Dovpo DnP Pod Tank

The SMOK Prisma 22W Pod Kit features an integrated 800mAh battery with a maximum output of 22W and natively pairs with a typical NOVO 2X Pod.

Parameter
Size: 24.5*15.0*107mm
Weight: 47g
Battery Capacity: 800mAh
Resistance Range: 0.6Ω-2.5Ω
Power Range: Max 22W
Standby Current: <50uA
Input Voltage: 3.3V-4.2V
Output Voltage: 3.60V

The chassis of the Prisma Pod Kit is made of a durable zinc alloy that is impervious to minor drops and drops and protects the 800mAh battery inside. Prisma features a pull and button-activated firing mechanism, perfect for those on the go or traveling.

The smok Prisma Pod Kit is also suitable for Novo Pod and Novo 2 Pod. Buy SMOK Vape PRISMA Pod Kit products at the best vape online store prices. For more details about the product: SMOK Prisma Pod Kit 800mAh 2ml

Other kits you may prefer:
Blvd 6K Disposable Vape Kit 6000 Puffs 13ml
Snowwolf Ease Disposable Vape Kit 8000 Puffs 18ml

I just started e-cigarretes for replacing cigarettes. I dropped my 18650 battery yesterday by accident is this safe to use ?

Aspire teams up with Monster Vapor to launch an exclusive MTL & RDTL vape, designed by MONSTERZ in Seoul, made by Aspire, and named it the Asmon. Asmon is a collaborative effort by two innovative and industry-leading companies, and is the first co-branded product from the partnership between Aspire and Monsterz, which was announced in October 2022.

Asmon is a refined NICOTINE DELIVERY SYSTEM that seamlessly integrates a visually striking chassis featuring well-selected materials within a compact pod-like structure for outstanding portability. It offers ultra-simple handling and exudes pure beauty, the Asmon will be the center of attention，anytime, anywhere.

DOVPO MVP 220W Kit

MVP Kit from Dovpo consists of a 220W MVP Box Mod and a DNP Pod Tank. It is a powerful starter kit that is powered by dual 18650 battery, and comes with 5-220W power range. MVP Kit supports Power/Voltage/Temp NI/Temp PI/Temp SS Mode, it is also designed with a 0.96 inch TFT display screen. Two DNP Coils are included: DnP DM-1 0.15ohm Coil and DnP DM-3 0.3ohm Coil. The DnP Pod Tank is easy to use for both novice and masters with simple operation. It has 5.5ml large e-liquid capacity, you can refill it from bottom. It also features dual air intake holes & smooth airflow.

Details:
1. 220W MVP Box Mod with DNP Pod Tank
2. 0.96 inch TFT color display
3. Power/Voltage/Temp NI/Temp PI/Temp SS Mode
4. Rich cloud and loyal flavor
5. DNP coils: 0.15ohm and 0.3ohm
6. Safety protection: Timeout/Short-circuit/High Temperature/Low Power/No-Cartridge/Overcharge Protection




DOVPO DnP Pod Tank

DnP Pod Tank is the first pod tank of DOVPO. It comes with elegant and classic appearance design. It is easy to use for both novice and masters with simple operation. Dovpo Dnp Pod Tank has 5.5ml large e-liquid capacity, you can refill it from bottom. It also features dual air intake holes & smooth airflow. Two DnP Coils are included.

Details:
1. The first pod tank by DOVPO
2. Compatible with DNP Coils
3. Bottom filling, 5.5ml capacity
4. Elegant and classic appearance design
5. Dual air intake holes and smooth airflow
6. Compatible with DOVPO MVP 220W Kit and DOVPO MVP Box Mod

You should know that smok prisma kit is a device that provides an 800mAh built-in battery with a maximum output of 22W. As a convenient device, it allows you to activate the device by both inhalation and a button. Through the LED indicator attached to the fire button, you can clearly know the current power consumption of the prisma kit to help you charge it in time.

With a 2ml pod, you can fill through the top. Prisma Kit is perfectly compatible with novo 2x pod/novo 2 and novo pod, so you can choose according to your needs. The pod has a relatively good leak-proof design, so you don't have to worry about oil leakage during use.


The built-in mesh cable of Novo 2X can volatilize e-liquid more comprehensively, and you can get comfortable MTL vaping. The overall is very light, whether you are travelling or on a business trip, it is definitely your good partner.

Features
• 800mAh Internal Battery
• Max 22W Output
• Leak Proof Design
• 2ml Vape Juice Capacity
• Compatible With Novo Pod/Novo 2 Pod/Novo 2X Pod
• Top Filling System
• Button/Air Switch
• MTL Vaping
• LED Battery Indicator

We provide you with more electronic cigarettes in a vape warehouse, with a complete range and you can receive the goods in a short time, saving trouble and worry.

More recommended e-cigs:
argus p1 uk
r and m tornado 9000

Hey guys, i just bought my first RTA tank. I have a dead rabbit v2 and im running it on a dragg mod. As i hit my mod, (70 watts) im not gettinf any flavour. When i go out to 90-100 watts. I get a burnt/dry hit. How would i fix this? I got into this because im looking for flavour

Order Aspire Riil X Starter Kit in vape near me. Accessorize with the Aspire RIIL X Pod System, featuring a 700mAh battery, 2mL pod capacity, draw-activation, and an accessory chain for a stylish carry. Based on the selected colorway, the silver plated option is built from a zinc-alloy material; whereas the gold option is constructed from stainless steel with 24K gold plating to give off a jewelery aesthetic. The magnetically connectable 2mL pods feature a side-fill mechanism wtih a silicone stopper for added prevention from leakage. Feel free to show off your RIIL X by attaching the included chain that matches the colorway of your device to accessorize in style on-the-go.

Aspire Riil X Starter Kit is a trendy and powerful vape. The battery capacity is 700mAh, the charging time is 20 minutes. With an ergonomic design, Aspire Riil X is designed for all-day use. Aspire Riil X is suitable for MTL and DL vaping.

Aspire Riil X Features:
Dimensions: 73.8mm x 42.8mm x 21mm
Battery Capacity: 700mAh
Operation: Draw-Activation
Charging: USB Type-C
Magnetic Pod Connection
Airflow Control Switch
Chain Loop
Accessory Chain
LED Battery Life Indicator
Pod Capacity: 2mL
Pod Construction: Food Grade PCTG
Fill System: Side-Fill - Silicone Stopper



Recommended products:
sweet vape flavors Georgia
menthol e juice New Jersey

The latest Freemax M Pro 3 Sub Ohm Tank is originally paired with the new Maxus 2 200W Kit, which is the third generation of the world-renowned M Pro series. It adopts industry-leading FM COILTECH5.0/Double-D Mesh coil technology - an innovative parallel mesh structure with two single mesh coils connected in parallel.



Besides, this sub ohm tank has a large 5ml e-liquid capacity with a top filling system, coming with the ISO 8317 Child Resistant Certified. All you have to do is simply lift and slide the top cap and then fill the tank, super easy and convenient.

Owing to M Platform, M Platform includes M1-D Mesh Coil based on FM COILTECH5.0/Double-D Mesh and 904L M Mesh Coils based on FM COILTECH4.0. As we know, M Platform is born for Freemax's well-known M Pro series and is a groundbreaking and professional atomization platform that can restore the original flavors and create denser clouds.

M Mesh Coil Series Specifications:

Freemax M1-D Mesh Coil 0.15ohm
Output Power: 50-80W (Best 70W)

Freemax 904L M1 Mesh Coil 0.15ohm
Output Power: 40-70W (Best 65W)

Freemax 904L M2 Mesh Coil 0.2ohm
Output Power: 60-90W (Best 80W)

Freemax 904L M3 Mesh Coil 0.15ohm
Output Power: 80-110W (Best 100W)

Freemax 904L M4 Mesh Coil 0.15ohm
Output Power: 70-110W (Best 95W)

Apart from the M Mesh Coil series, M Pro 3 Tank is also compatible with M Pro Mesh Coil and M Pro RBA Coil, offering you more options for various DTL vaping needs.

What’s more, it is a detachable tank with a removable 810 drip tip, replaceable glass tube, thread-type coil, and a 510 base, bringing much more convenience for cleaning and maintenance.