Eleaf iSolo Air 2 // Review by HyDrOpOnIc1987

Hello my friends and welcome to another review. Today I will be showcasing the Eleaf iSolo Air 2 pod mod kit, which was sent to me by Eleaf. I hope to teach you a little bit about this device, but will also maintain a fair and honest review. As usual, I will start with some promotional images and the features, specs and box contents before ultimately unboxing my kit, assembling it and finally my highlights from the time I spent using this kit. Alright, now that that's done, let's get to it!

Promotional Images, Features, Device Specifications and Box Contents















Features:
1. Easy to hold
2. 5 Colour Schemes (More colours, more joy)
3. Precise Airflow control
4. Compatible with all GTL series coils
5. Smart Chip inside
6. Great for all flavours.

Specifications:
Brand: Eleaf
Unit: 1 Set
Size: 33.2mm * 27.6mm * 91.4mm
Battery Capacity: 1500mAh
Pod Capacity: 2ml
Filling Hole Diameter: 3.5mm
Output Wattage: 1-40W
Charging Current: 5V/2A (USB-C)
Package: Gift Box

Package Contents:
1pc iSolo Air 2 Mod
1pc GTL MINI Pod 2
1pc GTL 1.2ohm Coil
1pc GTL 0.8ohm Coil
1pc USB Type-C Cable
1pc User Manual
1pc Warranty Card

Unboxing, Assembly and Usage Highlights





Right out of the gate, upon receiving the parcel and seeing the bright green on black all over the box, I was so happy! Besides red and black, bright green and black are my fav colour scheme, so to see it ALL over the box, I was happy!
On the front of the box is the Eleaf logo, a picture of the device as well as its name in writing, and the written Eleaf logo on the bottom.



On the right side is the “Scratch Check" sticker which has a QR code built into it as well, a picture that shows a black coil with fire beside it and the text “Power BLACK COIL Applied”, as well as 3 pictures depicting top filling, its GTL coil compatibility and the 1500mah battery that’s inside the device.



The left side has all the package contents, device specifications, support information, as well as their company HQ's address and website. Under that is a UPC code with the devices colour written directly over it.
The back of the box wasn't worth showing as I was running out of room for pictures. It's just the Eleaf leaf logo.
After taking the paper sleeve off, inside is the mod device assembled, but without liquid of course. I took the pod and cleaned it as best I could wish soap and water using q-tips.



I then further unboxed everything. Under the device, in another compartment, is a spare coil, a USB-C cable, the manual and warranty card.





I can't remember if the 1.2ohm coil was already installed or if I decided I wanted to try the MTL coil, but that's the one I chose to go with. I put liquid in each of the side holes and then installed the coil in the pod, filled the pod with Mango Wango De-Iced salt nic liquid by Sovereign and waited 15 minutes, which is probably over kill but the extra 10 minutes is worth not burning the coil.



After the 15 minute wait, I started at the very bottom of the recommended wattage for the coil (which is 7-13 watt) and slowly brought the wattage up one watt every 7-8 or so puffs until I rested at the max, 13 watts. I like the airflow almost completely closed off on this, even with the wattage range maxed for the coil. You know, more flavour! Anyways, I've been using this device exactly the same for about a week and a half with no real issues. I did drop the device and the pod popped off and coil shot across the room dumping my liquid on the floor. No idea why the coil popped off like that, but I hope it isn't going to happen every time I drop it. I don’t DIY my liquid so I don’t want to waste what I have trying to see if it will happen again or not. But yeah, that was my ONLY gripe with the device. I love the feel, how small it is. Easily palmable. The liquid wasn't used too quickly with the 1.2 ohm coil, but I didn't try the 0.8 ohm that was also included. Oh, also, the screen can flip sides, I guess that's for if you're left handed or are holding it upside down? But yeah, it can do it! There isn’t much else to say about the device beside how tiny it is and how incredibly comfortable it is in my hand. It is a stealthy little thing and would be perfect to take out and about when you don't necessarily want to be seen making big clouds or drawing unnecessary attention to yourself. Great for bringing to work, if you don't have a labour intensive job. If you're in the trades, I would probably look elsewhere as this will cause some grief when dropped and probably wont last the many drops that some other nameless devices can handle (lol).

I would like to thank Eleaf, as well as ELEAF_Tolken, for sending me this device to review. It has been fun playing with a new Eleaf device. Eleaf is a part of my “Quitting Smoking” story as my very first device was an Eleaf iStick TC40W and an Aspire Nautilus X which was given to me by my aunt for helping her move. Who knew that it would lead to all of this.

Thank you very much for reading my review and I hope you go check out the device in the link below.


Cheers!

CLICK HERE TO BUY VAPORESSO LUXE X KIT

Specifications:

• TANK Capacity: 5ml
• Coil Resistance:
• LUXE X 0.4Ω MESH POD(32W)
• LUXE X 0.8Ω MESH POD(16W)
• Battery Capacity: 1500mAh
• Output Power: 40W
• Charging Current: DC 5V/1.5A, Type-C
• Display: 3 x LED Light

LABOR SALE IS LIVE NOW!!!!!!!!!!!
USE COUPON CODE (LABOR15) TO GRAB 15% DISCOUNT STOREWIDE

Recently purchased a Aegis X with the Z Sub-ohm tank and noticed an abnormality in the battery indicator.

When fully charged batteries are inserted, the right indicator is nearly always one charge indicator bar down while the left indicator shows full. If I swap the batteries around, the left still shows full charge and the right indicator one bar down.

Sometimes with fresh batteries, both indicators will show full charge, but one cycle of the power button and the right indicator immediately drops one bar.

Through the day as I use the vape, both indicators fall as usual, but the right indicator is always one bar below the left. They only level out when one bar is left remaining on both left and right indicators.

I went back to the place of purchase and we tried out their display mod. It exhibited the same behavior.

Is this a software bug?

Hello to all the community! I vape for a little over four years with great pleasure! with electronic boxes or mechanical mods. I hope to share my interests and my great pleasure in vaping. Have a nice day everyone and happy vaping!

The geek bar is one of the better-known brands in the disposable cigarette category, and its popularity has only grown thanks to constant product updates and flavour innovations. This time the geek bar e600 is also a blend of rich flavours that will stimulate your taste buds and let you have an endless aftertaste.


I would like to briefly introduce you to a few flavours, Apple Peach is a fruity blend of apples and juicy grapes with an aroma that seeps into the heart.

Blue Razz Lemonade is a distinctive blend of blueberry and raspberry flavours, as sweet as candy to sink your teeth into, with a cool lemonade-like sensation on the exhale that is worth returning to.

Jungle Juice is an exotic blend of tropical and citrus fruits. The flavour stays with you throughout the whole time you're smoking and doesn't go away.

With a 400mAh internal battery and 600 puffs to satisfy your vaping cravings, this e600 disposable vape is undoubtedly the best choice if you are quitting smoking or are a beginner.

And if you are interested in more e-cigs, please enter vape online uk

More products recommended:
lost mary bm 600vape
elf bars uk

Calling all vapers with a challenging spirit, if you can do the move like the picture shown, you will have a chance to receive a XROS NANO from VAPORESSO!

Challenge rules:
1. Using any of the VAPORESSO products, perform the move shown in the picture

2. Take your own picture and post it on your own personal IG platform, tag VAPORESSO's official IG account @vaporesso_global, add hashtag #vaporessofingertip #fingertipchallenge, and @three friends (must be over 21) to follow our account

3. Participants will have a chance to receive an XROS NANO from us!

!You must be over 21 to join this challenge!

The Hyppe Max Air disposable vape is one of the hottest disposable vapes on the market! Each Hyppe Max Air is pre-filled with 13ml of 5% e-liquid, which can last up to 5000 puffs.

The Max Air disposable vapes sale USA is a thin box shaped disposable with soft rounded edges and a rubberized middle grip section that flows into a rubber duckbill mouthpiece. This device has a built in a 650mAh rechargeable battery and a USB-C charging port on the bottom.

The Hyppe Max Air features a lanyard loop and includes a neck lanyard so you never misplace your vape. Hyppe Max Air are outstandingly smooth, flavorful, and come in a variety of flavors.

Please go to vape shops to buy.

You may also like:

lost mary bm5000
geekvape aegis legend 2

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This can be one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. Never use them outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous discharge rating (CDR), never let it get colder than 0°C or hotter than 60°C, and keep the plastic wrap and top insulating ring in perfect condition. Never use a battery that is physically damaged in any way.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.





Test Results
It’s been 4-1/2 years since I last tested this cell so I thought it was worth seeing if the performance has changed over the years. The VTC6’s I tested performed a little better than the ones I tested in 2018. You probably won’t notice the difference but it’s good to see.

The datasheet mentions operation at over 15A if you keep the maximum cell temperature below 80°C but I recommend not using it at over 15A. This is an “energy” cell and not a “power” cell and you start getting a lot of voltage sag when running near its 15A rating or higher.

Two cells tested out to 3113mAh and 3123mAh, which is great consistency and is typical for Murata. Both exceeded their 3000mAh rating. I have not tested the cycle life of these cells.

These were purchased for testing by me from 18650BatteryStore (18650 Battery Store - Lithium Ion Batteries, Chargers and Accessories).


18650 Ratings and E-Scores Table:


20700/21700 Ratings and E-Scores Table:


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic



I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch is creating battery and device tests | Patreon.

To see how other cells have tested check out this link: List of Battery Tests

Building upon the success of the Daze Egge, the brand is once again proving it means business in the vape shop online by creating a new device to carry on the series. The Daze Ohmlet Disposable Vape is the bigger, cooked, brother with a larger capacity and puff count, with the sacrifice of a slightly larger design.

What are Daze Ohmlet Disposables? The Daze Ohmlet Disposable Vape is the evolution of the highly successful Daze Disposable Vape series, boasting an even larger capacity and puff count, with the tradeoff of its size being slightly larger. Despite the larger size, this rechargeable disposable vape device is still ultra-convenient, as it comes pre-filled, pre-charged, and can be used from the moment you receive it. While the Daze Ohmlet isn't a 'sunny side up' by no means, it can certainly deliver with its impressive features, which include a large vape juice capacity, an integrated rechargeable battery, Type-C charging port, a mesh coil for greater flavor and vapor, and a massive 7000 puff count that will ensure lengthy vape sessions.

The Daze Ohmlet Disposable Vape is impressive to say the least, as its features are designed to satisfy. However, what's even more impressive about this device is the flavor options, which are significantly much different than what is available from the vapesourcing. Make sure you check them out and try a few!

Features:
15mL Prefilled E-Liquid Capacity
Integrated Battery
5% Nicotine Concentration
LED Indicator Light
Mesh Heating Element
Approximately 7000 Puffs
Draw-Activated Firing Mechanism
Type-C USB Port



Recommended products:
hyde edge rave
vaporlax draco

the Smok IGEE A1 Kit has the thrills are unveiled in three ways, leak-resistant experience benefited from the top fill design,power by built-in 650mAh battery, and beauty reflected in the sturdy aluminum-alloy body. And two airflow options, so you can capture a content taste whether you prefer a tight or mild one. capatiable wiht the 2ml ejuice capacity mesh coil(0.9ohm) pod and will give you best vaping experience!A leak-resistant experience matters.



Features:
1. Top Fill Design
2. Leak-resistant Technology
3. Two Meshed Coils Included
4. Built-in 650mAh Battery
5. Two Airflow Options
6. Type-C Charging
...

Click here for more:

IGEE A1 Kit: SMOK IGEE A1 Pod System Kit

Freemax Marvos X Pro 100W is an upgraded version of Marvos X 100W Pod Mod Kit, which contains three parts: a 510-thread Marvos X Pro 100W Mod, a Marvos CRC Pod, and a 510 base. As for Marvos X Pro 1Kit is also the first box mod in Marvos series products to have a fantastic lighting design.

The Marvos X Pro also adopts industry-leading FM COILTECH5.0/Double-D Mesh coil technology for a 50% improvement in the flavors and heating speed. It now comes with two MS-D mesh coils and four MS mesh coils for RDL and DTL vaping needs, and there’s a wide range of MS series mesh coils on the way.



Now let’s summarize the main features of Marvos X Pro 100W Kit:
1. Full Spectrum Vaping, Unique Expressions of Individuality
2. FM COILTECH5.0/Double-D Mesh, Ultimate Mesh Coil Technology from Freemax!
3. Marvos CRC Pod Tank, All-Powerful and Childproof
4. MS Platform, Make "One-Marvos-Fits-All" Possible
5. Elaborate Leather Panel, A Fusion of Vintage and Modern Elements
6. 0.96-inch OLED Screen, Visualize Your Vaping Information
7. Single 18650 External Battery, USB-C Port, and 2A Fast Charging
8. Slide Switch to Lock/Unlock, Prevent Accidental Button Press
9. Two-Side Airflow Control, Customize Your Perfect Airflow
10. Four Output Modes, Simple But Smart
11. FM CHIP 2.0, Smarter & Faster & Securer

Can these main features of the Freemax Marvos X Pro Kit meet your vaping needs? Freemax Marvos X 100W Pod Mod Kit won the Best AIO Vapes 2022, taking first place. So the upgraded version of Marvos X Pro Box Mod Kit will be also your best choice.

Are you curious how the Samdwich RDA Deck looks like? ️‍

We are curious as well

COMING SOON!


Dovpo

Anyone know a US source for Little Space Drop from Inawera? Nicotine Giant is the only place I've found it and it's been out of stock for months. Thanks in advance.
CH

Set of four sealed Innokin GOMax disposable tanks. Each has a 0.19 ohm coil with a 60-80W suggested rating. The tank holds 5.5ml. All are black (which is a smoked color so you can see the liquid level).

Features include a mesh PLEX3D-Matrix coil, adjustable bottom airflow, woodpulp/cotton wicking material, and a slide to fill top filling port with a silicon seal.

Info about the tank on the Innokin website: GoMax - Product | INNOKIN®

All four for $12 shipped. Shipping is via First Class Mail with tracking.

Payment by PayPal F&F with no notes, comments, etc. entered when making payment.

Hello folks and welcome back for another vape review, today's review comes to me from ELEAF who holds a special place in my heart because it was a ELEAF device that helped me quit smoking cigarettes many years ago and is still operational today. A lot has changed in the vaping industry since then and ELEAF still remains a vaping original in it. Today I will be reviewing a very compact tiny Kit that houses a 1500mAh internal battery and has a maximum wattage output of 40 watts called the iSOLO AIR 2. Prior to my review of the iSOLO AIR 2 Kit lets see what this Kit is all about and check out some information on it.




COLOR CHOICES





IN THE BOX

* 1pc iSolo Air 2 Mod

* 1pc GTL MINI Pod 2

* 1pc GTL 1.2ohm Coil

* 1pc GTL 0.8ohm Coil

* 1pc USB Type-C Cable

* 1pc User Manual

* 1pc Warranty Card




FEATURES


* Compact and portable, easy to carry

* Consists of iSolo Air 2 Mod and GTL Mini 2 Pod

* Fit for Eleaf GTL Mini Pod Tank and GTL 0.8/1.2Ω Coil

* Smart chip to recommend the best wattage for coil

* Built-in 1500mAh battery with 1-40W output

* 2ml capacity, easy top filling and adjustable airflow

* OLED screen to show you the vaping details


PARAMETERS AND BREAKDOWN

• Size: 33.2×27.6×91.4mm
• Output: 1-40W
• User Modes: VW, Smart
• Battery: 1500mAh (internal)
• Display: OLED Screen – size not specified
• Resistance range: Not specified
• USB Type C port – 2A charge rate
• Pods: Refillable, replaceable coils
• Coils : GTL coil range
• Capacity: 2ml
• Adjustable airflow
• Top fill port
• New GTL Black mesh coil range
• Pod compatible with original iSolo Air mod

ULTRA COMPACT AND PORTABLE





GTL MINI POD COMPATABLE WITH iSOLO ORIGINAL





COILS INCLUDED





EASY TOP FILL POD





FULLY ADJUSTABLE DUAL AIRFLOW





SMART CHIPSET





FIRST IMPRESSIONS


Packaging is very simple just like the device was meant to be with a opened cover box inside a outer sleeve. The first thing and only thing you see is the beautiful leather covered device with the GTL Mini Pod already installed and in place. Under the device is the charging cable, user manual, warranty card and a GTL 0.8Ω and GTL 1.2Ω mesh coil made of kanthal wire. Compact and tiny while being attractive was my first impression, this is no featherweight as it feels solidly built with just enough heft excluding it from a shirt pocket device.

I have noticed some juices do not work or do not work well in the njoy Ace pods..... any recommendations???

The best mag 18 mod has received a lot of attention from various users since its launch, and I believe that it is not only noted for its great looks, but also for its powerful performance. Here we have to mention the MAG 18 mod.


Powered by dual 18650 batteries and with a maximum power of 230W, this is the best vape mod kit in terms of output which features a capacity that cannot be ignored.

And the built-in advanced IQ-X Chip provides Bypass, TC and Power Modes for the unit. The Power Mode allows you to adjust between 5 and 230W.

Paired with a 0.96-inch TFT Display on the side allows you to view the data more clearly. With the 510 thread, a tight connection to the smok uk TFV 18 Tank is also possible.

If you want a product that will last and give you a great vaping experience, the mag 18 mod is an absolute must.

You can also choose your favourite from them:
best rpm5 smok
best voopoo gt 2

Hello and welcome to today's review of the Centaurus Q80 Pod Mod from Lost Vape that was sent to me from Healthcabin. This device uses the UB Ultra Pod with the UB coils with a replaceable single 18650 battery and has a maximum wattage power output of 80 watts with wattage being the only power mode. Even though there is only 1 power mode it uses the Quest 2.0 chipset that I think is the best on the market as of this date other than a DNA. Lets check out some info on the Centaurus Q80 prior to my review.




COLOR CHOICES





IN THE BOX

1pc Centaurus Q80 Pod Mod
1pc 5.5ml UB Ultra Empty Pod
1pc UB ULTRA M3 Coil 0.15ohm
1pc UB ULTRA M1 Coil 0.3ohm
4pc O-Rings
1pc User Manual
1pc Type-C Cable
1pc Warranty Card




FEATURES


* 5.5ml UB Ultra Pod

* Compatible with Ultra Boost coil series

* A single 18650 Battery (Not Included)

* 0.96inch Full-color TFT Screen

* 5-80W Output

* VW Mode

* SS & Zinc Alloy Construction

* Two Adjustable Airflow Slots

* Top Filling System

* 0.15ohm and 0.3ohm UB Ultra Coil


PARAMETERS





UB ULTRA POD





UB ULTRA COILS





FULLY ADJUSTABLE DUAL AIRFLOW SLOTS





QUEST 2.0 CHIPSET







SINGLE 18650 WITH 80 WATTS OF POWER





FIRST IMPRESSIONS


Packaging for the kit is pretty standard with a inner box that slides out of a outer sleeve, inside everything rest in it's own spot on a plastic tray with the charge cord and spare O-rings inside a rectangular box with the paper items of your user manual and warranty card on top. For a extra touch of protection Lost Vape put the Centaurus Q80 in a small bag to protect it during shipping. At first glance the deep blue color almost looked black but in the light the color pops, I really like the overall design of the mod along with the UB Pod that is on the short side, being short improves the total appearance of this Pod Mod, there's even a very thin band of silver at the top portion.

Having reviewed the Plus v.2 quite a while ago, I was looking forward to getting into this one, and deep diving into the NEW bottom airflow addition. Thanks out to Amy @SteamCrave for sending this out for the purposes of this review. Despite being a huge SteamCrave fan, you'll get the straight scoop, my thoughts, some great hi-res pics, and no punches pulled.


**Steam Crave Aromamizer Plus V3 30mm RDTA Features:**

* 30mm Diameter
* 12mL Tank Capacity - RTA Mode
* 3mL Deep Juice Wells - RDA Mode
* Stainless Steel Tank Construction
* Threaded Top Fill System - Dual Fill Ports
* Postless Build Deck - 4 Deck Based Terminals
* Side Secured via Flathead Screws
* Single or Dual Coil Configuration
* Positive PEEK Insulation
* Various Side Bottom Airflow Configurations
* Interchangeable Build Decks - Sold Separately
* Parts Compatible with V1 & V2
* 810 Widebore Drip Tip
* Threaded 510 Connection
* Available in Stainless Steel, Black, Gunmetal

**Includes:**

* 1 Aromamizer PLUS V3 RDTA
* 1 Spare 12mL Glass Tube
* 1 Spare Parts Bag
* 1 Allen Key
* 1 Steam Crave Rubber Band
* 1 User Manual
* 1 Steam Crave Sticker


Right out of the gate, you were presented with numerous deck options, AND the v.3 is compatible with the Plus v.1 and v.2 decks.



One of the biggest changes to the v.3 was the inclusion of bottom airflow for your coils. 80% side flow, and 20% bottom flow. I was interested to see how much of a difference this made.



This, like most other SteamCraves as of late, was built like a tank. Extremely well designed, machined, and thought out, and I counted no less than 12 o-rings.



The tried and true Black and Red box with magnets to secure the flip up lid.



SteamCrave seems to have perfected the foam inserts to protect the products.



Included were the Aromamizer Plus V3, spare glass section, multi tool, spare o-rings, and grub screws.



Never leave home without your Manual, and Sticker !!!!



The Star of the show ...



Starting off at the top, the included 810 wide bore drip tip looked great, and was held snugly in place by the top cap o-ring ....

Dear wholesale customers,

The August is coming to an end. So here comes Healthcabin new round of brand discount – August brand discount round 2 for you to save more on different vape-brand products.

Take the chance to join us while offer lasts~

Promotion Details

• Discount: 1.5%-3% OFF for selected 10 hot brands
• Date: 22nd – 28th Aug, 2022(-0600 GMT)
• Wholesale ONLY
• No coupon code required, total discount amount can be found at your shopping cart.

Promotion Brands



With any questions, please feel free to contact your account manager.

Please view the August Brand Discount – Round 2 here.

Hi, today let's take a look at the Vapefly Lindwurm RTA. In this Test I will examine each of the characteristics that distinguish this item. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Vapefly Lindwurm RTA; Before starting let's see together some special features indicated by the manufacturer:
• 1. Rugged Vapefly Lindwurm RTA Atomizer
• 2. Laser engravings and corrosion finishes
• 3. Diameter 25.5mm, Drip Tip 810 + 510 Adapter
• 4. Top filling system, 5ml capacity
• 5. Precise bottom and side multiple airflow
• 6. Hidden adjustment of the air flow
• 7. Single coil deck design
• 8. Excellent DL vaping experience
• 9. 6 interchangeable airflow pins like those of Brunhilde MTL RTA



► Vapefly Lindwurm RTA; Packaging:
Vapefly continues to produce very beautiful packaging boxes inherent in the legendary Germanic culture. The outer sleeve shows the colors of an ancient parchment. The name "Lindwurm RTA" appears in Gothic style characters, they are also present; the wording "Untamed Dragon" logo and name of the Brand (Vapefly) and a sticker showing the color of this sample (Silver).

On the back side of the sleeve you can read that this Tank was developed in collaboration with German 103! Under the heading "Lindwurm RTA" the features appear as follows; various social icons, brand addresses and contacts, warnings, scratc & check, barcode, logos / brands.

"Lindwurm RTA" is also featured on one side of the box with a mix of Gothic and conventional writing.



► Vapefly Lindwurm RTA; Packing List:
• 1 * Vapefly Lindwurm RTA
• 1 * 5ml straight glass tube
• 2 * Firebolt Cotton Laces
• 2 * Pre-built Coil 26ga (KA1) x3 + 38ga (KA1) Ø3mm of 0.3Ω
• 1 * 510 Drip Tip Adapter
• 1 * Screwdriver
• 3 * Allen screws
• 5 * Air Pin
• 1 * Oring



► Vapefly Lindwurm RTA; Specifications:
• Diameter: Φ25.5mm
• Filling: Superior
• Capacity: 5ml
• Air flow: Bottom and side
• Deck: Single coil
• Air pin: 0.9, 1.2, 1.4, 1.8, 2.1, 2.5mm
• Drip Tip: 810



► Vapefly Lindwurm RTA; Available colours:
• Silver
• Black
• Gunmetal



► Vapefly Lindwurm RTA; First Impressions:
Lindwurm in the ancient superstition of Germany, would be a tremendous beast similar to a serpent-like dragon with legs but without wings. The Lindwurm was believed to symbolize war, plague and other calamities. With these beautiful premises, Vapefly with the collaboration of the German 103 team has produced another product that is really not bad in some respects.

I haven't had the privilege of testing the Brunhilde MTL RTA Tank, but I have noticed that Brunhilde MTL's Airpins are the same and are interchangeable with Lindwurm's, and while I was just thinking this might suit my RDL Vape style well, Sourcemore kindly gave me the option to choose a new device for the review. So I took the opportunity to remove my some curiosities and enthusiastically chose Lindwurm RTA.

When the courier rang the bell, I was at home, I run downstairs to collect the package and immediately opened it. Really everything I wanted was inside the box. Lindwurm RTA looks solid and not too tall, I like the style a lot, on the other hand "103" is the same team that designed Brunhilde RTA.



When choosing a new Tank it is important that you already have a Mod that can guarantee it the best technical / functional support, but you must also carefully evaluate the aesthetics. Vapefly Brunhilde SBS Mod 100W in combination with Lindwurm Tank RTA, can really guarantee all this. Don't you find this combination pretty? I love it, and a lot.



Lindwurm RTA can be easily broken down into 6 main elements; the glass is protected by a sturdy cage with artistic "windows" obtained by laser and with the edges worked with a special "corrosion" technique to give it an antique look. The top cap has an inner ring for the Drip Tip 810, also via the metal adapter (included in the kit) you can also install your favorite 510 Drip Tip. The central block has the bell internally threaded to join the Deck. In the upper external part there are 2 rings for the glass and one for the cage. The single-coil deck offers numerous interesting combinations in terms of airflow; with calibrated nozzles, slots and holes that are arranged in such a way as to offer the user a rather large combined action in terms of adjustments.



With a diameter of only 25.5mm the Lindwurm RTA is developed well in height, but not too much, I would say just enough to hold up to 5ml of e-liquid with a straight and not rounded glass. The type of refill from the top requires you to unscrew the top cap by 1/2 a turn and then use one of the two large slots for filling, which are protected by silicone membranes. The main elements of this tank, starting from the top cap and ending with the AFC adjustment ring, are held together by some solid "bayonet joints". This type of construction when it is well done (as in this case) considerably reduces the assembly / disassembly time of the individual parts.





In the image below you can see the central one-piece structure upside down, this to make you observe the internal thread and the hemispherical conformation of the dome. When reassembling the glass you have to insert it from the bottom, then the upper part of the glass will rest on an o-ring, while two internal o-rings will guarantee its sealing at the top. By removing the top cap, you can insert the steel cage from top to bottom and the spur indicated with an arrow (when you screw the deck) will automatically adjust the correct position of the glass. So you can turn the cage into any position and keep the decorations in the exact spot you like.



► Vapefly Lindwurm RTA; Bottom AFC + Side AFC:
The ingenious double external air control system is hidden from view, to see it it is necessary to extract the rotating ring, downwards it by pulling . This ring has a bayonet quick coupling / disengagement system. The rotating ring has rotation stops and slides over an o-ring which also performs the task of limiting condensate leakage (excellent system). The 4 grooves inside the ring have different widths and depths between them, in this way you can independently adjust 2 different slots (bottom AFC) in combination with other 2 different air passages (side AFC). Practically turning the ring nut you get a multitude of combinations in the regulation and orientation of the air flow towards the coil.





► Vapefly Lindwurm RTA; Single Coil Deck:
The deck structure includes a single coil that can be easily installed on the turrets by means of two Allen screws. The cotton containment slots are located in an elevated position and are dimensionally correct for a 3mm coil like the one supplied. Therefore, during the construction of the coil it is necessary to thin the cotton well, especially if you will use diameters greater than 3mm. The internal air flow is distributed by the turrets; on one side through a single rather large hole, and on the other side by three holes aligned horizontally. In the center between the turrets there is the calibrated nozzle that can be replaced with 5 others that we will see shortly.

On the bottom, the 510 pin is adjustable and removable, we also find the C E mark, the disposal logo and the writing "Lindwurm Designed By German 1o3 manufacturing by vapefly".





► Vapefly Lindwurm RTA; Airflow Pins:
To harmonize the double external control of the air flow with the internal one; Vapefly has included in the Lindwurm package 6 different types of nozzles (Air Pins) which are calibrated differently between them. The 0.9mm Air Pin is what you will find installed by default, the others are respectively; 1.2 / 1.4 / 1.8 / 2.1 / 2.5mm.



► Vapefly Lindwurm RTA; Airflow Pins: Coil Build:
In the image below you can see the various installation phases of one of the two original coils contained in the package. It is a pre-built 26ga (KA1) x3 + 38ga (KA1) Coil with a Ø3mm 0.3Ω diameter to push between 30 and 40W. Once you have chosen the air-pins (for this coil I chose the 2.5mm one) you can insert the legs of the coil and tighten the screws. I advise you to adjust the height of the coil according to the position of the air passage holes that are placed on the side of the turrets. Finally you can easily cut the protruding legs. You can activate the coil at a power of 15 / 20W to see if everything works, then after the coil has cooled you can insert the cotton by thinning the ends just enough to be able to insert them effortlessly into the two slots.



► Vapefly Lindwurm RTA; Vaping test & final conclusions:
Before starting the construction of the coil, I did some reasoning, but I already had a very clear idea of what I wanted to get from Lindwurm RTA. The first thing I did was to install the 2.5mm airpin, to be used with the 0.3Ω coil supplied. This is because I wanted to quickly get close to the ideal setting for my favorite RDL vaping, which is made of hot vapor, not too loose airflow and strong Hit (throat hit).

Coil installation was a quick operation, as was the finishing of the cotton. The coil gave me a value of 0.30Ω exactly as described! So I started from 30W, the heating is not slow, but not super fast either. So I cranked up the power to 35W before trying 40W. I soon realized that the starting point would be 35W, because the heating rate, the heat of the vapor and the flavor were starting to be well balanced. So I tried all possible airflow combinations (Bottom + Side) and found really significant differences in the amplitude of the flow. Then I decided that I would use both Bottom AFC and Side AFC settings fully open and for a combined action of them. Now I was really getting close to my ideal vaping; decent flavor, medium potency, hit to throath. Since I wanted to keep the power at 35W and slightly increase the hit in the throat, while also getting hotter vapor, I selected a rather large diameter Drip-Tip 510 from my spare parts, and installed it. The result was optimal for me, and I got everything I was looking for from the Vapefly Lindwurm RTA. Sure, the clouds with this configuration aren't very dense, the taste is decent, but I managed to amplify the other features that most interested me and in a short time..



Someone might complain of excessive noise and some hissing with some airflow adjustments, and this is the only aspect that may be criticized, but not annoying to me. I have thought a lot about it trying to find other objectionable aspects, but I really don't know of what else one could complain about using the lindwurm RTA.
The strengths of Lindwurm RTA are really many, starting from the aesthetics and robustness, or the purely technical aspects that distinguish it. I particularly liked the AFC multiple adjustment system that allows you different custom adjustments based on the coils. You can pull out a slightly contrasted DL type vape, if you use the original Coil and the supplied 2.5mm air-pin. But also a highly adjustable and Hit-loaded RDL vaping type. Or you can also remove the air-pin leaving the hole completely open and free, to get a rather loose DL vape. But of course to get the maximum DL performance (More vapor and more flavor) you will need to install a lower resistance than the one supplied and at the same time select a higher power in watts. It may seem absurd but you could also install a 0.6Ω coils in combination with the use of the smaller AirPins and a 510 Drip-tip, what you will get will be an unexpected MTL / RDL vape, thanks to the effectiveness of the double external adjustment system Bottom + Side AFC, which also allows you to precisely adjust narrow air passages. I had a great time playing with this Vapefly Lindwurm RTA, looking for and finding an excellent RDL (Restricted Direct Lung) compromise for me. If you think that what I have described in this test may also stimulate your desire to play with a cute and highly configurable tank, then you can certainly invest a small amount of money to start having fun.

I would like to thank Sourcemore for providing me with this Sample. I hope this review was useful for anyone looking to purchase the Vapefly Lindwurm RTA.
Sourcemore discount code to get Vapefly Lindwurm RTA priced at only $ 23.59 is: VLIR

Thanks for reading.