Hey everyone! Veteran vaper, new to site. Missing Arizona.

Suorin Fero Pod System is a vibrant and practical pod system powered by an internal 1000mAh battery delivering up to 25W of maximum output., and can hold 3ml e-juice. The Fero Pod compatible with Suroin Fero is transparent and tough. It can hold 3ml of vape juice and can be refilled for about 10 times. Suorin Fero is equipped with a 0.42-inch OLED screen that displays your vaping data clearly with cool RGB light effects. It is compatible with the entire FERO pod cartridges.



Coil Resistance:0.6ohm (18-23W),0.8ohm(12-16W)
Max Output Power:25W
Built-in 1000mAh Rechargeable Battery
Type-C Fast Recharging: About 40 Minutes
3ml Large Vape Juice Capacity
Transparent Pod Design
0.42-inch OLED Display: RGB Light Mode
...

Click here for more:

Suorin Fero Kit: https://www.healthcabin.net/suorin-fero-pod-system-kit-p/29934.html

Vaporesso Luxe X2 Pod Kit, your ultimate vaping companion designed with convenience and performance in mind.

Say goodbye to frequent charging hassles with its mighty 2000mAh rechargeable battery, ensuring uninterrupted vaping pleasure. With a generous 5ml luxe x pod cartridge, enjoy extended vaping sessions without constant refills.

Customize your vaping experience with ease, thanks to the adjustable output power ranging from 5 to 40W and coil resistance options of 0.6ohm and 1.0ohm. Whether you prefer rich clouds or subtle flavors, the Luxe X2 Pod Kit has you covered.

Forget about constantly checking battery levels, as the LED indicator keeps you informed at a glance. Plus, with COREX 2.0 Technology, expect enhanced performance and longevity.

With airflow control for optimal vapor production and flavor, the Luxe X2 Pod Kit is perfect for both beginners and seasoned vapers alike. Paired with the innovative LUXE X Pod Cartridge, enjoy smooth draws and satisfying clouds every time.

Experience the epitome of vaping excellence with the Vaporesso Luxe X2 Pod Kit – your passport to flavor paradise. At the vape shop near me, any kind of vapes will be found here, hope you can enjoy it.

I'd like to suggest:
aegis legend 3
dovpo ayce pro

Good morning all, first time post from Me today so bare with Me. I have just received a Vaporesso Luxe X Pro and I am wondering if I am charging it all wrong. I put the device on its initial charge until it hit 100%, I then began to vape the device with the 0.4 pod installed @ the recommended 30 watts. The battery was down to 30% before I even hit 100 puffs. Is this normal, only I was under the impression that the battery would last Me a full day, some reviewers actually stating upto two days. Do I need to keep the device on charge after it's hit 100%? Feeling like I might have been mugged off by online reviewers. TIA.

I’ve lurked on here for over 10 years if I had to guess, but I’m pretty shy even online sometimes so I mostly looked at reviews&tips.

I wasn’t planning on making an account ever honestly, but when I was looking for some “old” mods&RDAs that are hard to find on Google, I saw that there’s a swap/LTB/ect section so I figured it’s time to push myself out of my comfort zone again in case anyone has any of the things I’ve been searching for. I had a good sized collection that was mostly lost in a house fire a few years ago, &have had a hard time finding some of my “must haves” through simple google searches along with shop owners I have good relationships with.

I like to think I’m pretty knowledgeable about vaping since I’ve been in the hobbyist side of things for just about as long as I’ve been vaping, so hopefully I can be helpful to people here if anyone is looking for recommendations or anything.

Hey folks! Today I have a very overdue review on one of Innokin's newest pod mod kits, the Kroma-Nova. This medium-sized pot kit comes with an array of features we've all come to expect in a device of this size, and has done a fairly good job in most aspects. For anyone that's owned or knows of the previously released Kroma Z pod kit, that is essentially the predecessor to the Nova, but it used Innokin's Z-coils instead. The Kroma Nova uses the newly-released PZP coil series that are currently compatible with the Kroma-Nova, and the latest Zyon pod kit. To get a great visual layout of the color options and features available for the device, please check out their site before continuing on with this review so you have a fair comparison with my test results.

I want to thank @Innokin_Alisa for coordinating this product for review. As per the norm, this critique will be conducted in a fair and honest manner. All opinions are my own. Alright, let's dive in!




I received two Kroma-Novas for this review. The colors sent to me were Blush Pink and Azure Blue (no, this review is not a mod gender reveal! ). Each kit I received contained a Kroma-Nova pod kit, two coils (1.0 ohm coil pre-installed and a spare 0.4 ohm coil), a spare RDL drip-tip (MTL drip-tip comes pre-installed), a short USB-C cable, and some reading literature. Please refer to the manual if anything in this review is not clear functionality-wise. The Azure Blue varies in look depending on the lighting and doesn't quite match up with what I'm seeing on Innokin's site. If color/shade is a priority of yours, please Google photos to get a better idea for any of your matchy-matchy needs.

And, as with a lot of their products, Innokin continues to use recycled materials for their packaging. I'll note it every time I see it, and it's appreciated from many of us!




Right off the bat, one thing that I want to mention that I absolutely love about Innokin is that they continue to stick with a sturdy zinc-alloy construction. I cannot reiterate enough how much plastic and aluminum-alloys do not hold up in durability when it comes to mishaps.

On the front side of the Kroma-Nova from top, down we have a very tall firing bar that extends down past the UI and even into the up and down directional buttons (if you want to press hard enough). Toward the top of the fire bar is the easiest spot to fire, but the entire bar makes for very easy firing and gives a nice little clicky sound when activated. Behind the fire bar hides a tidy and simplistic UI. Just below the UI are the up and down buttons followed by USB-C charging port located at the very bottom.

The back of the device is padded with moisture protected faux-leather. Parallel stitching runs the length of the padded material about a half an inch apart with "NOVA" written slightly embossed between them. Near the top of the back side is the airflow control knob which rotates an inner ring seen in the bottom 2 photos. This airflow control varies the draw from a very loose MTL to an open RDL. This was one thing I was surprised to see from Innokin. In most cases, they do a very good job of creating a "true" MTL ("true" being what I'd consider the suction needed for a packed cigarette), but that is not the case with the Kroma-Nova. Even with the MTL drip-tip, I noticed very little difference in terms of the needed suction (or lack thereof) to replicate that of a cigarette. The MTL airflow you can expect is that of what the industry now commonly refers to as "MTL", when in actuality, it's very often a tight RDL.

I'm sure you've noticed the "cup" design on the inside of the pod well where the coil seats when the pod is popped in. This has actually been fairly clutch with a bit of leaking that I've experienced from the pod, but none of which exited the device through the airflow, and this has much to do with this little well that cupped and contained the leakage.




The UI is ultra-simplistic which makes the Kroma-Nova very user-friendly. The device scrolls in 0.5 watt increments from 6W to 20W and in full watt increments from 20W to 60W, and it does round-robin. This is a "smart" device meaning it will auto-detect the resistance of the coil and recommend a starting wattage which can both be seen for the 0.4 ohm coil and 1.0 ohm resistances, above (yes, it is very common for coils to be a tenth or two of an ohm off).

Other than to turn the device on or off which requires 3 quick clicks of the fire bar/button, the shortcut button combinations shown above are really all you need to know to access everything this chip offers. The first two photos show how to lock the up and down buttons (but still allow firing) indicated by the lock symbol in the top left portion of the UI. Up + Fire shows you the coil resistance, available battery voltage (battery life), and a hidden puff counter that can be cleared. Holding the up and down buttons allows you to change the fire button and screen light cutoff timers. To make changes in the wattage, simply hold the up or down button for 2 seconds (with the device unlocked).




One big change from the previous Kroma Z is the slide-top refill access. No need to pop the pod out and pull out a rubber bung or anything like that. The slide-top feature has proven to work quite well, assuming you don't attempt to overfill the pod. It should be noted that the top of the 3mL (2mL TPD) tank slopes downward toward the refill port, meaning you need to tip the tank forward about 45 degrees unless you don't plan to fill it up all the way. I'm not entirely sure why it was designed like this, but it might have been done intentionally to help prevent from overfilling the pod. The refill membrane opening is very large and has no problems fitting in a full-sized Chubby Gorilla bottle nozzle.

The PZP coils pop in and out effortlessly. Make sure to give the coil a firm press inward when installing a coil to make sure it seats properly. Also, it's ideal to have the airflow openings on the coil pointing toward the sides of the pod for the smoothest airflow. You can see what I mean by this from the photo below.

The two coils that come in the kit are 0.4 ohm and 1.0 ohm resistances. The 0.4 ohm coil has a recommended wattage between 30W and 40W, and the 1.0 ohm coil recommends using a wattage between 9W and 13W. It is my recommendation to always start at or below the recommended wattage to help break the coil in a bit and and to allow you to work up to a wattage that's comfortable for you. Also available are a 0.6 and 1.2 ohm coil, sold separately.

As I mentioned in the section above, the airflow openings on the coils should be oriented toward the side/sides of the pod when installed. There is technically no "wrong" way of installing the coil, but to achieve the smoothest airflow, keep this in mind.

I was hoping the reduced diameter of the coil in the 1.0 ohm coil head would help restrict the airflow more than it does, but it certainly helps boost the flavor output and left me quite surprised. More on that below.



Test Results & Conclusion:

I've been using the Innokin Kroma-Nova for a few months now. The only juices I've been using in it are 3 mg/mL, 70/30 VG/PG, so my experience with it are anecdotal. It's the same juice I use in pretty much all of my testing, so the observations that I make regarding flavor output and coil longevity are a comparison across all of the vape products I review.

I started my testing with the 0.4 ohm coil simply because I wanted to see how well the mod performed at higher wattages, and also because lower resistance coils are generally more prone to leaking. I started vaping at 30W and raised the wattage to 40W but felt the vape felt dry and airy. I continued to vape at 30W until around 300 puffs, and then started to notice a bit of a burnt flavor. I backed the wattage down to 25W for another 50 puffs or so, and then down to 20W again when I started to notice a tad bit of burning. I retired the first 0.4 ohm coil at around 400 puffs because I didn't think it had much life left in it. I switched to the 1.0 ohm coil and was caught off guard. The 1.0 ohm coil was producing better flavor than the 0.4 ohm coil and was performing with wide open RDL airflow, fantastically. At only 12W, the 1.0 ohm coil lasted forever in battery life. I switched back to a spare 0.4 ohm coil supplied by Innokin to give it another shot. The second 0.4 ohm coil lasted around 6-700 puffs and slowly died in flavor output along the way. This isn't quite up to industry standards in what I'd consider the standard, but Innokin also has some of the cheapest coils on the market. Since then, I've been using the 1.0 ohm coils and have been delighted with them. The PZP flavor output isn't the strongest for coil head tanks and pods, but they're tasty enough for my taste. Some juices can actually be gaggy when they put out too much flavor; it almost feels like you're drinking the e-liquid which can come off as bitter. In flavor output, I'd have to give the PZP a slight edge over the Z-coils, but the longevity award still goes to the Z-coils, hands down.

Let's quickly talk about what didn't impress me much. As a reviewer, I constantly have products in rotation so I'm hardly ever solely vaping with a single device. There have been times where the Kroma-Nova has sat on the desk untouched for up to a week in some cases. Having come back to the Kroma-Nova on a few occasions, the 0.4 ohm had experienced a bit of leaking each time. Luckily, the design of the cupped pod well contained any would-be mess, and I never experienced any juice exiting the device which was a pleasant surprise to say the least. The "cup" also makes it very easy to clean out any leakage which made the leaking almost negligible. I never ran into any leaking issues with the 1.0 ohm coil.

One other thing I noticed that isn't really a con really, but more of a consideration, is the range in airflow. Innokin generally does a very good job catering to the restricted MTL crowd and if I were to agree that the Kroma-Nova had MTL capabilities, I'd call it a very loose MTL. The range is pretty decent but the most restricted setting is still quite airy. Being that I'm an RDL vaper this doesn't bother me much, but I was a bit surprised by it and feel that it should be noted.

Now, there's certainly more to like about the Kroma-Nova than the minor things I just noted. The new slide-top refill access is sleek and works a charm. The UI was designed to be very easy to use while still giving the user the ability to make preferencial adjustments. The internal battery has a 3000 mAh capacity which is a lot for a mod that ranges from 6W to 60W and only takes about 80-90 minutes to fully recharge from dead. With the 1.0 or 1.2 ohm coil, this is will certainly last for 300 puffs or so. Lastly, the Kroma-Nova has a very nice hand-feel and stays competitively small in comparison to other devices of its size.

Overall, the Kroma-Nova is a pretty great little device. Innokin continues to make some of the most solidly constructed devices on the market that aren't flawless, but if you've been vaping long enough, you already know that isn't a realistic expectation. The Kroma-Nova vapes quite well and has just enough creature comforts for me to give it a thumbs up.

Pros:
> Solid zinc-alloy construction
> Slide-top refill
> Nice hand-feel
> Minor leaks are very easy to clean
> Easy plug-n-play PZP coils
> Easy to use UI w/ basic accommodations
> Spare drip-tip
> 3000 mAh internal battery
> Decent airflow range (very loose MTL to open RDL)
> Good flavor (esp. the 1.0 ohm coils)

Cons:
> PZP coils have decent but not great longevity

Considerations:
> No 510 adapter like with the Kroma Z
> 3mL tank size is middle of the pack for device of this size
> Airflow restricts down to very loose MTL


Rating:
7.5-8


And that wraps up this review on the Innokin Kroma-Nova pod kit. I hope this review was informational enough to aid in answering any decision-making questions you might have about it. Keep an eye out for participating vendors if you're outside of the UK. Thank you for reading this review, and I hope to catch you again, soon.

Happy vape hoarding!

I need to work in spain for short time. Any way to buy the vapes without TPD?

Experience the Aspire Flexus Pro Kit, a testament to compact design and flawless functionality. This kit redefines performance with effortless handling. Featuring a high-performance chipset and a robust 1200mAh battery, it seamlessly blends aesthetics with practicality to deliver an uncompromising vaping experience.

Crafted with lightweight materials, the Flexus Pro ensures effortless portability without sacrificing performance. Its non-slip design offers a secure grip, ensuring durability during frequent use and travel.

Go to smokstore for a more in-depth look at this product!

Here today we have the Geekvape Aegis Legend 2 Mod graciously provided by Sourcemore for the purpose of this review. First ill start with the Specs.

***Specifications***

Brand: GeekVape
Product Name: Aegis Legend 2 Mod
Output Power: 5W-200W
Maximum Output Current: 45A
Maximum Output Voltage : 12V
Power Display Battery icon on the screen
Charging Port : USB-C port
Battery Specification: 7.4V, external dual 18650 battery(not included)
Display Screen: 1.08 inch TFT color screen
Operating Temperature: 0℃~45℃
Storage Temperature: ﹣20℃~60℃
Relative Humidity: 45%RH~75%RH
Color: Silver, Gray, Black, Navy Blue, Red, Rainbow, Classic Black, Rainbow Purple, Blue Red, Mint Green, Pink Gold, Red White, Pink, Orange, Bright Silver, Black Orange, Silver Black, Gold Green.

***GeekVape Aegis Legend 2 Mod Short Description:***

Aegis Legend 2 Mod is a 200W box mod that utilizes the 2nd generation of GeekVape tri-proof technology. Featuring from IP67 to IP68 rating water-resistance and dust-resistance, it is more durable with higher level of shock-resistance. The wide working temperature range (down from ﹣20℃ or up to 50℃) makes it resistant to use. There is the new A-Lock design to protect you from over-burnt coil or overheating by accidental press. Designed with a 1.08 inch full screen display, it is convenient for you to get the vaping information and easy to operate. The USB-C charging port is equipped with flipping cover for easier charging.

Okay now that the technical stuff is out of the way, here's my review.

***Review***

So i got it on Friday and i had the perfect opportunity to test it's durability. That test was as follows: how will it hold up to being out in the sun on a bleacher for 3+ hours at a NASCAR race and how will it handle any drops onto the pavement outside the gates for the racetrack? Well it performed damn near perfectly if i am being honest. I paired it with my Zeus SE (post 2021 revision) tank filled with 0mg Pineapple Grapefruit Juice Head juice. I had no issues with it in the heat aside from it throwing "new coil or old coil" twice which was weird but maybe it was just the conditions it was being tested in. I don't know if that was the case or not but i have heard of this issue popping up so maybe it isn't the environment. Now how did it handle being dropped? It handled it spectacularly actually. I dropped it about 4 times and aside from my tank glass exploding after being run over by a golf cart (which to be fair it had already been dropped 3 times) it had no real damage aside from a few scratches. Luckily though i brought a spare tank glass so i was all set and prepared. Now y'all are probably asking "well how's it feel in the hand?" to which i say the following: its thinner than i thought it would be which is nice, and it fits perfectly in my smaller hands. I do love this mod as a daily. It rivals the Vaporesso Armour Max and even the Aegis X in terms of durability but its thinner, lighter, but its built just as well IMO.

***Verdict***

Solid 9.5/10 and definitely worth picking up IMO. I dont understand where the hate comes from with the Legend 2 because i dont see any issues with it aside from the coil thing popping up 2x since having it. Oh and the fact it takes 18650 batteries might be a bummer for some but as someone who uses exclusively 18650 batteries it doesnt bother me one bit. And Sourcemore was kind enough to include a coupon code for this specific item and that code is SM8OFF.

Hello, this time let's take a look at VooPoo Doric Galaxy S1 Pod Mod Kit. I will examine in this Test each of the features that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► VOOPOO DORIC GALAXY S1; Before starting, let's look together at some special features indicated by the manufacturer:
• New 0.7Ω cartridge, smooth taste
• 800 mAh battery, all day vape
• Lightweight device, value-added experience
• More than 1 week without flavor fading
• More than 20 days without replacing the cartridge
• Longer e-liquid lifespan up to 90ml
• More battery life all day



► VOOPOO DORIC GALAXY S1; Packaging:
The small cardboard box of Galaxy S1 states on the front; the name of the brand (VooPoo), the name of the product (DORIC GALAXY S1), in the center the image of this item. On the back of the box they are listed; the content, the contact details of Woody Vapes Technology C0.,Ltd, the warnings, legal logos/trademarks. On the side profile of the packaging there are: the name of the device, the color indication of this sample (Obsidian Black), two barcodes, the scratch & check, three main features in the form of icons, Qr-code.





► VOOPOO DORIC GALAXY S1; Packing List:
• 1* Doric Galaxy S1 (800mAh built-in)
• 1* 0.7Ω Doric Galaxy Cartridge (pre-installed)
• 1* User Manual



► VOOPOO DORIC GALAXY S1; Specifications:
• Dimensions: Φ16*125.88mm
• Pod capacity: 2ml
• Device material: Aluminum alloy
• Capsule material: PCTG/PC
• Power range: Maximum 16W.
• Battery: Integrated 800 mAh
• Filling type: Lateral
• Standard cartridge: 0.7Ω Doric Galaxy cartridge
• Compatible cartridge: Doric Galaxy 1.2/0.7Ω cartridge



► VOOPOO DORIC GALAXY S1; Available colours:
• Silver
• Lake Green
• Lucky Purple
• Blue Gold
• Russet Red
• Obsidian Black



► VOOPOO DORIC GALAXY S1; First Impressions:
Opening the package of the VOOPOO Doric Galaxy S1, the first thing I noticed was the lack of a charging cable, never mind, who doesn't have a USB-C charging cable at home? The other lack is that of a disposable spare cartridge, I'm sorry about this, but reasoning I thought that this is a kit created for economy and for maximum purchasing convenience, it all adds up. This new "Vape Pen" has a truly minimalist design, yet appears robust, simple and light to use with a weight of only 31.5g. The compact size and ergonomic shape make it comfortable to hold and easy to carry.





I received the "Obsidian Black" color version for this test. VOOPOO Doric Galaxy S1 boasts VooPoo's classic good manufacturing care, with the device made of zinc alloy, the product should therefore be durable and long-lasting. The pen-shaped design has ergonomic contours with two slightly flattened and opposing sides which improve both the aesthetic appearance and the user experience in handling the Mod. Note that there are no Airflow holes on the body of the Mod, this suggests a rather closed airflow regulation system for MTL, but we'll see later.

Hi, I'm new at this forum from Spain with an ARMOUR MAX

Discover the new Dovpo Ayce Mini Kit, a compact and lightweight yet powerful oral smoking device for a premium smoking experience!

The Dovpo Ayce Mini Kit is ideal for you to take with you wherever you go, and despite its compact size, it has a powerful 1000mAh built-in battery that ensures long-lasting and stable output. Equipped with a Type-C fast charging port, it allows you to charge easily and stay energized at all times.

Go to smokstore for more details!

Anything from Trinity mech mod to RDA and RDTA. Can DM me straight, Thanks.

I've been searching and searching to try and find a place but I'm coming up empty handed. Hopefully you guys can help me out with donating or trading away my vape juice I'm not fond of.

Looking for an irresistible deal on disposable vapes? Look no further! Bellavapor is thrilled to announce our latest promotion: Buy Any 3 Disposables and Get 1 Vaal 4500M FREE! Yes, you read that right - absolutely FREE!

It's simple: just use code B3G1 at checkout to claim your free Vaal 4500M. With an offer this good, it's time to stock up on your favorite disposables or try something new!

Not sure which disposables to choose? Let us recommend some popular options:





And many more!

Don't miss out on this limited-time offer! Stock up on your favorite disposables today and enjoy the added bonus of a FREE Vaal 4500M. Shop now and elevate your vaping experience with Bellavapor!

Glad to meet you guys here! I have 3 years of vaping experience, hoping to meet more vaping people here.

Hey Vapers!

Looking for a way to kick back and enjoy some chill vaping sessions? Let me introduce you to the Lost Vape Ursa Cap Kit – your new go-to for laid-back vaping vibes.

Specifications:
Size: 18.4 x 31.4 x 92.0mm
Net Weight: 50.5g +- 3g
Cartridge Capacity: 2ml
Battery: 1200mAh Internal
Battery Voltage: 3.3 - 4.2V
Power Range: 9-25W (Auto Adjust)
Body Material: Plastic
Type-C Charging: Supports 5V/2A and 5V/1A/

Main Features:
Powerful Battery: With a 1000mAh battery, this pod kit keeps you vaping all day long without any worries.
Easy Charging: Say goodbye to waiting around! The Type-C charging port ensures speedy recharging so you can get back to relaxing in no time.
Smooth Performance: Enjoy smooth, flavorful hits with the Ursa Cap's 25W power output. It's like a little slice of vaping heaven!
Versatile Compatibility: Compatible with URSA cartridges, this kit lets you mix and match flavors for the ultimate personalized vaping experience.
Stay Clean: Keep your pods pristine with the anti-dust cap included in the kit. No more gunk – just pure, clean flavor every time.
Find Your Flow: Adjust the airflow to your liking and get that perfect draw with ease. It's all about finding your chill zone.

Experience Unmatched Relaxation:
The Ursa Cap is designed for maximum comfort and convenience. Its sleek design fits perfectly in your hand, and with the auto-adjusting power range, you can just sit back and enjoy the ride.

Summary
So why wait? Grab yourself a Lost Vape Ursa Cap Kit, kick back, and let the good vibes roll. It's vaping made easy – and oh so relaxing!

Other kits you may prefer:
best lost mary flavors
smok morfbar touch 20k review

Hello, I've been in e-cig for 3 months now, after 25 years of smoking cig. These 3 months I have been using Wenax M1 with 0.8ohm coils.

I was looking for a new box mod device with an atomizer. I watch some reviews on YouTube and now I'm in more dark than I was before

So I asking you long-time users of e-cig what is a good kit to start, for a newbie like me.
Somehow my eyes caught 2 atomizers that I like for MTL Nautilus 3 and Innokin Zlide top, for box mode, I looked for Innokin Z80 or Aegis mini2.
I would be happy if you could suggest what combo I should use, or if you have something better with your experience.
Thank you for your help and answers

Hello, I'm Peter and I come from Slovenia. I was 25 years a smoking nerd, and now I'm in e-cig for 3 months. Till now I'm doing good with e-cig and hope I will manage to slowly put nicotine to 0.

Hi guys,

I just got my first boro set up.
I got the SXK Billet box. It was supposed to be the 2024 v4, but they sent me the 2023 version. I've taken this up with them, awaiting reply.
But I also bought the Lost Vape Centaurus boro tank and I cannot get it to work. It fires on a normal mod with the 510 adapter, but on the BB it says "No atomizer". I've swapped out the chimney with the other and tried the other air pins and it still won't work. The boro tank that came with the Billet box does work though.

I've noticed 2 odd looking screws in the accessory bag. I've no idea what they're for and the manual doesn't give any clue. Photo

Is anyone aware of any compatibility issues between the Centaurus Boro tank and the Billet box or know what these 2 screw things are? One side has place for a flat head screwdriver and the other side is just totally flat.

Thanks

Hi, today we're taking a look at the Lost Vape Thelema Nexus. In this Test I will examine each of the characteristics that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Lost Vape Thelema Nexus; Before starting, let's look together at some special features indicated by the manufacturer:
• Extremely large battery capacity (total battery capacity up to 2400mAh)
• Exceptional and elegant design
• Ergonomic Driptip, 2 Driptip material options are available: Cotton and PC
• Modern 360º status LED system
• Super sensitive vaporization sensor mode
• Optimal leak protection
• Type-C fast charging



► Lost Vape Thelema Nexus; Packaging:
The package has a white background and on the front it shows; Thelema Nexus in the same color as inside, the Lost Vape logo at the top left and the kit name at the bottom. On the back you can see; some main features in the form of icons, the packing list, the warnings, the authenticity code, a barcode with the color of this sample shown on it, all the legal trademarks and logos.



► Lost Vape Thelema Nexus; Packing List:
• 1x Thelema Nexus Pen 400mAh
• 1x Thelema Nexus Powerbank 1900mAh
• 2x Nexus Pod 0.8Ω
• 2x plastic Drip Tip
• 5x Disposable cotton filters
• 1x USB-C cable
• 1x User Manual



► Lost Vape Thelema Nexus; Specifications:
• Material: Aluminum Alloy, ABS and PCTG
• Pen dimensions: 16x16x112mm
• Powerbank dimensions: 30.5x23.5x103mm
• PB Battery: 1900mAh
• Pen Battery: 400mAh
• Maximum Power: 16W
• Automatic shooting
• Shot Type: MTL
• Drip Tip: Integrated
• Charging: USB-C
• E-liquid capacity: 2ml
• Refill: Side
• Resistors included: 0.8Ω



► Lost Vape Thelema Nexus; Available colours:
• Black carbon
• Silver Carbon
• Silver Blue
• Gunmetal Brown
• Twill Violet
• Twill Black



► Lost Vape Thelema Nexus; First Impressions:
Lost Vape enters the market of Pods equipped with PB and offers this new dual-fuel kit, riding the current fashion and the needs of enthusiasts towards this interesting type of vaporizers. Thelema Nexus Kit is a device that combines extreme simplicity of use with interesting technical features. Starting to handle the product, what shines through is the good construction quality of the Power Bank with the zinc alloy frame and the valuable decorative insert which increases its comfort and aesthetic impact. Once Power Bank and Vape Pen are magnetically joined together, they are compact, ergonomic and easy to transport, with a total weight of just 100 grams. We are therefore faced with a balanced and compact MTL kit when you hold it in your hand.



The Vape Pen is also made of zinc alloy with high specific weight to give the user excellent tactile and qualitative feedback. On the pen there are; some not too invasive decorative writing, the magnetic Wireless thread, and two small opposing holes for the passage of the air flow. The airflow system is designed for MTL type aspirations and is optimally calibrated for the supplied cartridge



I received two different color versions of this Kit for this test; Silver Carbon & Twill Black. The Power Bank houses the Type-C charging port on the bottom, the bottom has a rubberized surface with a tread-shaped texture which increases grip, allowing you to keep the device firmly in an upright position. The 1,900mAh internal battery can fully recharge the pen up to almost 5 times in a row for truly extended battery life. You can also charge your pen and your Power Bank at the same time in a very short time of about 30 minutes. Furthermore, with the PB you can charge not only the Pen but also an infinite variety of small electronic devices.

Thanks to Rachel from Nevoks for sending me this product to review!
Check it out on their website: NEVOKS FEELIN AX POD KIT



Disclaimer: This review is my own thoughts and I am not associated with anyone at Nevoks, nor am I being paid to write this review.



In the box:

• Feelin AX Device (1500mAh) x1
• Nevoks A1 Pod 0.6 ohm (3ml) x1
• Nevoks A1 Pod 0.8 ohm (3ml) x1
• Type-C Cable x1
• User Manual x1
• A1 Platform Card x1

Specs:

• Dimensions: 16.4 x 24 x 120 mm
• Weight: 57g
• Output Power: 5 - 30W
• Material: Aluminum Alloy/PCTG
• Battery Capacity: 1500mAh
• Pod Capacity: 3ml / 2ml for TPD
• Resistance: 0.4 ohm / 0.6 ohm / 0.8 ohm / 1.2 ohm
• Pod Material: PCTG

Design
The design of the device is a pretty simple stick pod device, like we are used to from the Feelin line from Nevoks. The device comes with a screen, similar to the Feelin A2, which gives you all the optimizations options and information you would possibly need while vaping. The design is going for simplicity and functionality. It has a sleek aluminum alloy body and compact sizes. It’s a device with a comfortable shape which makes it easy to carry around.



Pods
One of the standout features of the Feelin AX is its pod compatibility, which extends across the entire Feelin A line. I have tried all of the 4 side fill pods. These come in 0.4, 0.6, 0.8 and 1.2 ohms. All of the pods vaped phenomenal, but in terms of flavor and vapor production the 0.4 really stood out to me. If you are more of a somewhat tight MTL lover, the 0.8 and 1.2 will also definitely not let you down. I enjoyed vaping on all of these pods a lot. What really sets these pods apart is their insanely consistent performance. I’ve tried it with some fruity flavors and mint flavors, and each pod maintains that great flavor throughout using them. I don’t mind the rubber plug filling, especially because these pods are 3ml (a little bigger than the standard for this size device), so I don’t have to fill them as frequently. The only downside of these pods in this device, is the fact that you can only see the top of your liquid level. The minimum line is pretty low on the pod, but to check it, you have to take the pod out of the device. A viewing window above the button and screen to see the pod, would’ve been a very good and welcome addition to this device.




Performance
In terms of performance, the Feelin AX impresses with its user-friendly features and reliable functionality. You can lock or unlock the button with 4 clicks, so no accidental burns in your pockets occur with this device. The autodraw of this device works flawlessly, so I don’t see a reason to unlock the device at all to be honest. I personally keep it locked at all times. Of course you can adjust the wattage of the device as well, within the range of the pod that you have in the device at that moment.
With the 1.500mAh battery that’s in the device, you easily get through the day. It’s rather big for a device that is this small in a stick form. I was pleasantly surprised by that. Even when using the 0.4 ohm pod most of the time on high wattages, it still got me through a full day of vaping easily.



Pros

• Versatile choice in pod resistances
• Supports rapid charging
• Good pod compatibility
• Accurate airflow control
• Large battery for this small pod
• Very good flavor

Cons

• Can't see the juice level clearly because most of the pod is inside the battery

Verdict
Overall, the Nevoks Feelin AX Pod Vape offers a compelling combination of design, performance, and versatility. With its sleek aesthetics, intuitive features, and impressive flavor production, it's a standout choice for both beginners and experienced vapers alike. While it's not without its minor drawbacks, such as limited juice level visibility, the Feelin AX excels where it matters most, delivering a satisfying vaping experience.


Another big thanks to Nevoks for sending out this device to review. Don’t forget to check it out on their website and check out their other products as well!

Liquideo - Strawberry Banana Grape Freeze
Producer:Liquideo, France
10ml ready to use liquid
This is my second "Frankenstein" headed little monster, as the previous taste test from the manufacturer had a profound effect on me. The previous product had three fruits in it, it seems this "Fizz Freeze" line will be what it is with the power of blends.
Sweet strawberries, juicy grapes, and delicately fleshy bananas will be the lineup, which the manufacturer says will be felt in equal proportions with use. Hopefully, we won't cut a face like the monster in the product picture.
After opening the bottle, the first thing you can smell is the sweet and fruity scent. Strawberry and banana combine to give a pleasant, fragrant aroma experience, complemented by the freshness of grapes. The complexity of the flavour can be inferred from the aroma.
On the inhale, the strawberry dominates, strong and sweet but not intrusive (with a slight candy-like note). The banana is milder and gives a pleasant creaminess. On the exhale, a refreshing grape influence is felt, adding a pleasantly tart finish to the mix. The flavours blend harmoniously, neither overpowering the other. The name "Freeze" refers to the cooling effect, a slight "ice" sensation that is not too strong, but enough to make the vapour refreshing, which can be useful on hot summer days.
The Liquideo Strawberry Banana Grape Freeze has a balanced flavour where strawberry, banana and grape complement each other well. An excellent choice for those who like fruity flavours and a light cooling effect. I can only recommend it to everyone, it's worth a try, especially when it's on sale. The product comes from Kumulusvape, which you can check out at the link below.