Today I want to show you the Rincoe Jellybox V2 Kit, a compact and efficient vaping device designed to deliver a satisfying experience. With its 850mAh battery and an output power range of 10-16W, this kit provides ample power to meet your nicotine cravings or enjoy a mouth-to-lung (MTL) session. The included 3ml Jellybox V Pod features an integrated 0.8ohm and 1.0ohm mesh coil, making it perfect for use with nicotine salts.

Equipped with an MCU chip, it offers an impressive 95% efficiency and multiple protection features, ensuring a safe and reliable vaping experience. Its intuitive auto-draw firing mechanism allows for hassle-free operation, eliminating the need for buttons or complicated settings. Additionally, the kit comes complete with a lanyard, providing added convenience and portability.

Crafted with a combination of PC and PCTG materials, it is not only lightweight but also durable. Its PC and PCTG construction not only enhances its longevity but also contributes to its overall lightweight design, making it easy to carry around wherever you go.

The pod kit features a magnetic connection between the pod and the device, ensuring a secure and stable connection. This eliminates the risk of accidental detachment and ensures a consistent vaping experience. Compatible with the Jellybox V Pod, this kit offers a versatile vaping solution that caters to a wide range of preferences.

In summary, the Rincoe Jellybox V2 Kit combines power, convenience, and durability in a sleek and compact design. Whether you're a fan of nicotine salts or prefer a satisfying MTL session, this kit has you covered. With its efficient MCU chip, intuitive auto-draw firing mechanism, and lightweight construction, it is a reliable companion for your vaping needs.

Please go to vape shop online to make an order.

You may also like:
mag solo vape
buy smok morph 3 kit

Gorilla Gloop Bar CBD Disposable Vape, a revolutionary product that combines sleek design, exceptional performance, and an unparalleled CBD vaping experience.

With 120mg of CBD per bar, this disposable vape offers a potent dose of cannabidiol to help you relax and unwind. The draw-activated mechanism ensures convenience and simplicity, allowing you to enjoy up to 600 smooth and flavorful puffs without the hassle of buttons or settings.

The Gorilla Gloop Bar features a compact and stylish design, fitting comfortably in your hand or pocket. Its 2ml capacity ensures a sufficient amount of vape juice for extended use. Choose from five enticing flavour options, including Flyin High, Blazed, Blitzed, Brain Mash, and Baked, each crafted to tantalize your taste buds and enhance your CBD experience.

This CBD Vape is made with 99.9% CBD isolate and Gorilla Gloop Terpenes, ensuring the highest quality and purity. Rest assured, the THC content remains below 0.2%, making it a legal and non-psychoactive option.

The effects of using the Gorilla Gloop Bar go beyond the physical. CBD is known to provide potential benefits for both the body and mind. Many users report a sense of relaxation, stress relief, and a heightened state of well-being. Whether you're seeking a moment of calm or looking to unwind after a long day, this CBD vape offers a delightful experience that can help you find your balance.

Experience the synergy of great design, exceptional performance, and the benefits of CBD with the Gorilla Gloop Bar CBD Disposable Vape. Elevate your vaping experience and discover the joy of relaxation and tranquillity, all in one convenient package. You can also find the cbd disposable vape you want through the vape shop near me.

Hot-sale Vapes Online:
best luxe xr max
rincoe jellybox v2 uk

As title says looking for replacement screw size for Blotto mini or a place/person to purchase from.

Long time ECF lurker, but N00b poster, from Northern Cali, whats good!?

Foodgod Luxe 4000 disposable vape, a nicotine-free disposable vape, is now on sale at a discounted price.This sleek rectangular vape features rounded edges and a flat mouthpiece. Its all-black body serves as a canvas, with a playful splash of color in the center, adorned with the Foodgod logo.

With a focus on fruit flavors, the Foodgod Luxe offers a delightful vaping experience. Each device comes pre-filled with 10ml of vape juice, providing up to 4000 puffs. The rechargeable 380mAh battery and mesh coil technology ensure impressive vapor production. Simply draw on the device to activate and savor the unique and pleasurable clouds.



What's more special is that this is a best nicotine free vape, which is a powerful helper for us to quit vaping.It has a smooth hit that is not inferior to ordinary nicotine-containing vapes. If you are going through such a difficult time, it is really worth a try.

Good products, good prices, all on a good platform. When purchasing the foodgod luxe 4000 nicotine-free disposable vape, take advantage of the free delivery service available at reputable online vape shops.

You might also like:
puff ultra sale
elf bar bc5000 no nicotine

Maven-New $180 shipped
Includes BP PRo 3mm cotton
Silver Billi Billi Aluminum Boro
Wotofo Framed Staple Wire spool(20ft)

Hastur 85 21700 aio-New, never used, removed plastic to check it out.- $120 shipped
Includes BP Pro 3mm cotton or native wicks platinum+ cotton
Molicel p45b 21700 battery
Twisted Timmies Aliens 5 wrap .22/4 wrap.25

Susco Psyc Rba
Blue Billi Billi Aluminum Boro
Bp pro cotton 3mm $80 +ship

Buddies- gunna try quitting butts again, but I have a serious issue.

No matter what I do, I can’t get more than a few days from a coil. I’ve tried everything with every coil and every mod. Ive read every article online. I’ve went to all the local shops but I can’t get a solution.

Last time I switched to vaping I only made it a couple months cuz changing coils every two days was just stupid.

There’s gotta be someone on Gods green earth that knows what’s going on.

Please help me! Cheers.

Once again I say welcome back for today's review of the latest version as of this date of the KYLIN family of RTA's called the KYLIN 3. This is a dual coil 25mm RTA that can also be used as a single coil with a big enough coil it's very easy to build on being that it uses a postless deck and supplies you with a coil jig with correct marking showing the user where to place the coil for cutting. You get everything needed to build on the deck including 2 coils, grub screw driver, extra grub screws, 510 drip tip adapter, user manual with instructions and a spare straight glass tube that I have no idea what the capacity is because it's not available but I think it's 4ml. Preinstalled on the RTA is a 6ml glass tube that's more suited for this RTA. I said you get everything needed and you do except for cotton, that you have to supply yourself as none is included.





COLOR CHOICES





IN THE BOX


* 1pc Kylin V3 RTA

* 1pc Pyrex Glass Tube

* 1pc Accessory Bag

* 1pc Coil Lead Guide

* 2pcs Tripe Fused Clapton Coil

* 1pc Instruction Manual

* 510 Drip Tip ADAPTER





SPECIFICATIONS





FEATURES


* Supports Dual Or Single Coil

* 6ML Juice Capacity ( Bubble Glass )

* Honeycomb Airflow

* Top Fill

* Designed For Large Clouds

* Easy To Build On


LARGE 6ML JUICE CAPACITY





ANTI LEAKING TOP AIRFLOW





HONEYCOMB AIRFLOW WITH BOTTOM SHOWERHEAD DESIGN





SINGLE OR DUAL COIL USE





DESIGNED FOR LARGE CLOUDS





TANK BREAKDOWN

Hello and welcome back for another review. This time I’ll be taking a look at the Vandy Vape Kylin M Tank that was sent to me by Sourcemore in order to provide a fair and honest review. I own a few different AIO or boro style mods so thought it might be fun to try out the Kylin M Tank in one of them. The Kylin M tank has a liquid capacity of 3ml and is compatible with BB style systems as well as the Pulse AIO mods. It makes use of honeycomb style airflow located on each side of the tank. The build deck is designed to be used with mesh strip coils but you might be able to insert a standard coil. There is a ceramic spring loaded center to hold the cotton tightly against the coil to prevent burning. To me this one is designed mostly for RDL or DL vaping and offers big airflow. There are two airflow reducers that can be used with the tank to tighten up the draw some.






WHAT’S IN THE BOX?

1* Kylin M Tank
2* A1 M Coil 0.2ohm
2* A1 M Coil 0.15ohm
1* Accessory Bag
1* Replacement Tank
1* Drip Tip
2* Vape Cotton Laces
1* Instruction Manual
1* Adjustable Airflow Apparatus A
1* Adjustable Airflow Apparatus B
1* 510 Coil Burning Set
1* 510 Adaptor Ring(Big Aperture)

SPECIFICATIONS:

Size: 25.4*16.4*38.2mm

Tube Capacity: 3ml

Fit for: BB Style System, Vandy Vape Pulse AIO

Color: Matte Black, SS, Frosted Grey

Packing Size: 77*42*104mm

FEATURES:

1. Honeycomb airflow

2. Equipped with a large size airflow pipe and drip tip

3. For Pulse AIO BB style system

4. Ceramic shrapnel design in the build deck

5. Two airflow brings different vaping

6. Brings real big cloud

INITIAL THOUGHTS:

The Kylin M Tank comes in a familiar box since I’ve reviewed a few different Vandy Vape tanks before. It comes in a black box with a clear viewing window where you can see the contents of the kit. As you can see in the picture below, I received the SS version for my review. Besides the Kylin M Tank, you can see that it comes with a spare tank section that in this case is a red color as well as two airflow restrictors, a spare drip tip, and a 510 adapter that connects to the tank in order to burn in coils. What you can’t see is that there are two plastic holders in that foam insert that each have two mesh strip coils. Underneath the foam insert is where you’ll find the user manual, two cotton threads, and an accessory bag that includes spare seals, a screwdriver, and a rod for shaping the mesh coils. The mesh coils that are included are .15 and .2 ohm A1 mesh strips.

The Kylin M name is printed on the front of the tank. I found it interesting that the rubber fill plug is actually attached on the side with the plug wrapping around the front to cover the fill port. It has only happened to me once or twice but I have pulled the plug from the wrong end and either pulled it completely out of a tank or pod or broken the tab off in the tank or pod. With this one there is no mistake where to lift from when filling the tank.

In the third picture below you can see that there are seven honeycomb holes located on each side of the tank for a total of 14 honeycomb airflow holes to provide excellent and smooth airflow for this tank. I was honestly surprised how smooth the airflow is on this one and get no noise from it even when using either airflow restrictor or none at all.

The build deck for the Kylin M has a spring loaded ceramic center piece like some other mesh tanks that I have tried before. It holds the cotton against the coil to prevent burning of the cotton which can happen if the cotton is too loose and gives a horrible taste. The center ceramic is held in place by a slotted head screw with spring underneath that holds tension upwards on the ceramic. If you can, it helps to push down while sliding the cotton into place when wicking. The clamps on each side are also spring loaded which makes it much easier to install the mesh coil. I’ve tested tanks before where those were not spring loaded and it can make it quite the PITA when trying to insert your mesh coil without bending it out of shape. The side clamps are held in place with phillips head screws and there is a small screwdriver included with the tank in case you don’t have the correct size to use. The build deck is held in place by the black rectangular seal on the base of the deck. It does a nice job of holding it in place securely.

The first thing to do is to prepare your mesh coil. I picked the .2 ohm mesh to start with since the rated wattage is what I am more comfortable with. I used the included rod and shaped the coil around it so I could then loosen the clamp screws to insert the coil.

Once the coil is inserted and tightened in place then you can attach the included 510 adapter to burn in the coil. You want to do this at very low wattage. I had my mod set at 13 watts and only did quick pulses to clean off any residue that might have been on the mesh from my hands. You don’t want to go very high for the dry burn and don’t want to fire for very long. I speak from experience as I have melted a mesh coil before by improperly dry burning. After the dry burn is done then the cotton can be inserted. There are two large cotton threads included with the tank and it helps if you can push down while threading the cotton to make it go in easier. I cut the cotton first at an angle up towards the coil like I have done with other mesh tanks. Then I thinned the tails and trimmed them for length. You want the tails to just sit on the top of the base and not get stuck in the space between the base and upper tank portion. It took quite a bit of trimming to get it right and even trimmed a little more after soaking the cotton with liquid. If you see any cotton sticking out the sides after the base is inserted then take it back apart and trim more or you will have leaking. I know the picture isn’t the best but you want the cotton to land on that ledge above where the black seal is. The liquid on this one feeds from the top of the tank down to the tops of the wick. It’s a gravity feed system.

From there you can fill the tank, remove the adapter if you haven’t already, and install it in your favorite boro device. The promotional material shows it installed in a Pulse AIO but I opted for using it in one of my Meson AIO mods. I quickly discovered that I shouldn’t use the front cover with the airflow control built into it on the mod since it drew large amounts of condensation and I believe was the cause of some leaking. After removing the front cover I had no further issues. After removing the front cover, I decided to try each of the two airflow reducers included with the tank since it was just too much airflow for my tastes. The larger reducer was not a lot different from running without. It was still a very airy DL vape. I swapped it out for the smaller reducer and that allowed a little more restriction for a slightly restricted DL vape. That was closer to what I was looking for. I actually liked it better with no reducer and using the front airflow control cover of the Meson but quickly got tired of cleaning the inside of the cover and the edges around the bottom where the cover meets the mod. The airflow reducers simply slide onto the bottom of the tank and there is a groove in the bottom of the tank for them to fit into so as not to get in the way of making connection with the electrical contact pin in the mod.

FINAL THOUGHTS:

I already mentioned testing the .2 ohm mesh coil but since this is a review I went ahead and tried one of the .15 ohm coils even though the suggested operating range is a bit higher than I usually like to use. I followed the same steps building the deck and trimming the cotton. Vandy Vape was nice enough to include the following instructions which can be helpful if you’ve never built a mesh deck before. What it doesn’t show is how to trim the cotton. I would recommend watching an instructional video on YouTube if you want a better idea how to do the wicking.

My initial attempt at wicking the Kylin M deck with the .15 ohm mesh coil was an utter failure. I thought I did a good job and filled the tank and inserted it in the Meson AIO. After a few puffs I had liquid running down my hand and on to my shirt. I took the deck back off and pulled the wick so I could make another attempt at wicking. I had already used both of the included cotton threads but do have some other mesh cotton threads that I had from a different tank that I liked so used one of them. I think my initial failure was that I left too much cotton on the sides sticking out from the coil and this was touching the inside of the honeycomb airflow holes allowing the liquid to leak out the sides. Since the airflow holes are on the sides, you can’t see them once the tank is in the mod so I am just guessing but am thinking I am correct. I wiped the tank and inside of the Meson as well as I could and tried again. I think there was still some residual because I thought it was leaking again. I pulled the tank out again and decided to try it in the Pulse AIO.5 that I previously reviewed. I figured out pretty quickly that with the side panel on the Pulse that it greatly restricted the airflow on the tank so I removed the airflow restrictor and it was better. I ran the coil up to about 55 watts but really didn’t care for it as much as the .2 coil.

The airflow and draw are very smooth on the Kylin M tank and felt like I was getting very good flavor with the .2 ohm coil. I am not a consistent mesh tank user so may have struggled more than someone who uses them all the time but for my tastes I felt like I had to spend way too much time on fiddling with trying to get the wick trimmed properly to fit in the tank without sticking out the sides or pressing against the airflow holes. For me personally, this one is a no go and will not find a spot in my regular rotation. I wouldn’t be surprised if someone at Vandy Vape had their ears ringing when I was trying to get the .2 ohm coil wicked correctly.

I would like to thank Sourcemore and Kavis for sending the Kylin M Tank for this review. It was definitely an adventure. Thanks as always to the readers. Below is a link to the website if you would like to try one for yourself.

Vandy Vape Kylin M Tank 3ml for BB Style System (sourcemore.com)

Black Dovpo Riva DNA 250c. Barely used. basically new. Condition like new 10/10. $115.

Has anybody purchased any D# products from CannaClear? If so, have you had recent checkout problems? This is not an 'order placed and money taken but no deliverance' issue, I can access the site itself just fine and browse thru the 'catalog' and place whatever in my buggy, but I cannot submit my order. There is an ongoing email volley between me and their support. I've tried using 5 different browsers between my PC & phone.

View attachment IMG_20230527_134455.jpg

Thanks to sourcemore.com for sending me this device to review: Vaporesso Xros 3 Nano Pod Kit 1000mAh


The Vaporesso Xros 3 Nano is a small square shaped device with a fine unboxing experience. When unboxing the device, the feeling is comparable to unboxing your new high end smartphone.


Specs:

• 1000mAh battery
• Adjustable airflow
• Size: 69.9mm x 14mm x 51.2mm
• Type-C 1A charging
• 0.6-1.2ohm pod resistance
• 2ml pod capacity
• Price: $36.90 USD ($25.99 USD at sourcemore)

The box includes:

• 1 XROS 3 Nano Battery
• 1 XROS series 0.6ohm mesh pod (pre-installed)
• 1 XROS series 0.8ohm mesh pod (in box)
• 1 XROS Type-C USB-cable
• 1 Lanyard
• 1 User manual & warranty card

Features
The XROS 3 Nano is a pod vape with pulse mode. This should make sure the device delivers an outstanding flavor performance until the last draw. In my personal opinion, pulse mode isn’t noticeable, though I’m not quite sure if that's a bad or a good thing. Flavor does seem to be good when compared to other pod devices, so that might be the pulse mode doing its job.

The XROS 3 Nano is draw activated, that part is a huge pro to me personally. It features a square design, which feels very nice in hand. The device has adjustable airflow and a wide range of different pods to choose from.




Design
The design of the device is refreshing, going for a stylish and bold design. The device is available in 10 different colors. From lemon yellow, to rose pink to bondi blue. I think having these options is great. You can get a more concealed lowkey color, or get a very bright one, flaunting your vape.

It’s a small, portable device, easy to just slide into your pocket for on the go. The square shape makes it comfortable to hold while hitting your vape. There is no fire button, the device is autodraw only, which to me, is a huge plus, but it’s something to keep in mind if you do prefer the button. I also like the new dot at the top of the device. It gives the device an old school iPod look.


Pods
Since this year, vaporesso has widened its variety in pods for the XROS series. At this point in time there are 0.6, 0.7, 0.8, 1.0 and 1.2ohm pods. All but the 0.7ohm pod have a capacity of 2ml. The 0.7ohm pod has a capacity of 3ml. All but 0.7ohm pods also have top fill. You just snap off the top part and fill the pods in the red rubber hole. The 0.7ohm pod has side fill.

The pods are small and convenient, which makes it easy to take multiple out and about and switch pods with different flavors throughout the day. They barely ever have leaks, which is the main reason why I personally love this pod device.

The new pods have an even better life span than the old ones. With the old pods I would get two weeks max out of the sweeter flavors, but I’ve been going over a week on a new pod and there isn’t flavor loss yet whatsoever.




Performance (battery, flavor, etc)
Performance of the device is honestly outstanding, especially seen its size and how easy it is to use. To me, it functions especially well as a MTL device, but with the airflow wide open and a 0.7 or 0.6ohm pod, this could easily be used for DTL hits as well.

The 1000mAh battery is something worth mentioning as well. It gets me through most days easily. Even when I forget to charge it at the end of the day, a quick 15 minute morning charge will get me through most of the day.

Flavor of this device is outstanding, one of the best I’ve had in pods for a long time. With that you also get a leakfree experience, which isn’t something that can be said for all pod devices.

Hitting the device feels like it's fully charged, until it’s dead, so keep an eye on battery light on the front of the device.



Comparing to the original XROS Nano
The original XROS Nano has always been one of the best (if not the best) pod devices out there. There are some differences between the original one and the 3, though. The original one is a tiny bit smaller in dimensions. The pod also sits deeper into the device. In my opinion that’s more aesthetically pleasing, but less convenient. The new way makes it easier to see if you’re getting low on juice and it sits in the device just as firmly. I do prefer the old view off the battery level with the four dots. Now it’s a bar that lights up either green (100-70%), blue (70-30%) or red (30-0%). On the old device, I did notice that with the airflow all the way open, the device would make a whistling sound. Vaporesso seems to have fixed this on the new one. Airflow overall feels a little tighter and the control button for this looks better.


Pros

• Light weight and pocket friendly
• Easy to use top fill system
• Leak free pods
• Up to 5 pod options
• Good pod life
• Strong securing magnets
• 1000mAh battery

Cons

• New way to show battery percentage
• Pulse mode doesn’t seem to do anything

Verdict
Personally, my favorite pod device the past year has been the original XROS Nano, and this new version of the device just knocks it from first place. I still take both when out and about, but I notice I’d rather take the XROS 3 Nano out of my pocket than the original one. The original one is only there for when the battery of the XROS 3 Nano dies and this only happens if I forget to charge it the night before, cause this device gets me through a day and a half easily on a full charge.

In this day and age I’d recommend this device to any who wants to quit smoking or using disposable devices mess- and hasslefree. The good things about this device outweigh the bad by a long shot. There isn’t much bad to say about this device, especially with the new pods.






A big thanks to everyone who made it to the end of this review. Another thanks to sourcemore for giving me the chance to write this and for everyone who is interested in this beast of a pod device, sourcemore also sent me a discount code for you all to enjoy:
VX3NK $20.89 - Vaporesso Xros 3 Nano Kit

Hello everyone,

I'm new here and thought I'd introduce myself a little bit.
My name is Naomi and I am from the Netherlands. I started vaping a little less than a year ago, after having vaped since before my 18th birthday. I am 24 now.

I basically only vape pods now, MTL. Mostly vape menthol flavors, but like the occasional sweet fruity flavor every now and then.

Hello all. I came here, because I'm having the exact same issue someone else had with their Voopoo DRAG Pro auto-firing (seeming mind-of-its-own). Unfortunately, the thread doesn't allow any more replies, but this person's problem was word-for-word what I have been dealing with, and I wish I could reply.

Either way, I got this model, because it was supposed to be safer, but it isn't at all! It's autofiring so badly that it is unusable now and incredibly dangerous. It gets the liquid incredibly hot to where it burns my fingers. It fires all day. I can stop it with 3 clicks (which no longer changes the wattage, weirdly). But then it just starts autofiring again. It's bad. Something is very wrong with it and getting worse.

I read that they keep getting worse, as far as quality is concerned, and so I'm considering something new. I've been using the drags forever now. The reason being that the casing is sturdy as hell, and I drop my vapes a LOT. Some vapes break on the first drop. I drop mine at least 3 times a week. Concrete included. They usually survive for months and months.

All that said, what are some sturdy products that can take a fall (many falls)? No glass tanks...those always break so fast!

I need something sturdy, affordable, and preferably something that uses the same 18650 batteries (removeable), as I have a collection of those. I will get another Drag if I have to, but I'm kind of ready for something different. Maybe something not as large either. Definitely something that DOESN'T LEAK EVERYWHERE!

Suggestions? Thanks!

The Veepon Tita X and Tita X RBA are two new offerings from the folks over at Veepon into the increasingly crowded borotank (Billet Box Style) mod and tank market.

CHAPTERS

00:00 - Intro and specs
03:00 - Close Up
12:00 - Vape
14:00 - Thoughts

Social Media - Vaping With Vic | Twitter, Instagram, Facebook | Linktree

Rumble - Login to view embedded media
YouTube - Login to view embedded media

For 14 years, I've been vaping Freedom Smoke USA Ultra Menthol PG/VG 50/50 extra flavoring 16 mg nic, and that only. They currently aren't doing any online orders because they are relocating their main store. But they have no idea for how long that will be.

So what are my options here? Does any other company make and ship juices that are just like Freedom Smoke? Would it be possible to make my own and make it taste the same? How hard would that be?

Thanks in advance!!!

Hi, I m vaping for last 3 years. my prefered style is RDL. I like fruit flavors and desserets do not vape at all.
Last few months i mostly use RDAs ( Nitrous RDA is my favorite). I live in Croatia (EU) in one small town 100 km from Zagreb.
I usually vape 2 mg.

Hey guys,

I noticed today my vape store still has eleaf pico LE instock they look so cool,
Thinking about picking one up tomorrow,
i kno these picos are highly wanted too?
Anyone use them and like them?
Are they good devices?
i mainly subohm at high wattages this is just a single battery device is it aimed more for mtl?
whats a good tank or atty for a pico?
maybe nautilus or melo 4

my subohm tanks/RTA prob look silly on it thats why i need some tank recommandations too

Size is So small its cute lol

MEMORIAL Day Sale 30% OFF !!​

It's MEMORIAL WEEK SALE enter discount code HONOR at check out to receive your discount. Looking to Save 30% NOW , use coupon code HONOR at checkout. Select from hundreds of unique Disposable Vape Bundle Options. Choose from our large selection of Vaporizers, Mods, Coils, Vape Eliquids, Disposable Vapes Devices, Vape Bundle Deals, Vape Accessories with a Savings of 30% OFF Regular Prices. Choose some of our Most Popular Vape Ejuice Brands on Sale NOW with 30% Saving which include FUME, JUUCY, GLAMEE, HQD, SUORIN, VGOD, UNO,HYPPE, SUPREME with many more amazing Vape Flavors.

Sale ends 5-31-2023

EveyThing Vapes

The Aspire Cloudflask 3 is the latest version of the popular Pod/AIO system first launched by Aspire more than three years ago.

CHAPTERS

00:00 - Intro and specs
02:00 - Close Up
09:00 - Vape
11:00 - Thoughts

Rumble - https://rumble.com/v2pi29f-the-aspi...as-a-cloudflask-2....html?mref=z0wfa&mc=kybb8

YouTube - Login to view embedded media