Texas wants to ban flavors, this bill will eliminate all products from shelves aside from those authorized by FDA and owned by Big Tobacco.

H.B. 3772 - Establishes a regulatory framework for e-cigarettes containing nicotine,
requiring manufacturers to certify their products, pay fees, and comply with FDA
regulations, while prohibiting the sale of non-compliant products and imposing penalties
for violations, with full implementation by 2026.

S.B. 1698 – Establishes a regulatory framework for e-cigarettes containing nicotine,
requiring manufacturers to certify their products, pay fees, and comply with FDA
regulations, with a directory maintained by the state comptroller to ensure compliance,
effective September 1, 2025.

Visit the VTA Action Center link here to have your voice heard

I’ve used the original Nautilus Minis as the mainstay of my vaping for nearly 10 years now and they are still going just fine, so it came as rather a shock to my aged system after I broke one, to find them now listed as “out of production” earlier this year.

OK I’ve still got 13 of them, including the first two I ever bought. and they’re still going strong and I’ve near enough 10 years worth of coils for them, but we live in uncertain times - there is a growing tide of opinion against vaping, a vape tax is going to hit us next year in the UK, and the China/US tariff wars could cause a shortage of supplies even here - so once again it’s Stocking Up Time.

I’d tried a Nautilus 3 about a year ago, but found at that stage it didn’t do it for me, so I set about acquiring a Nautilus GT.

Now, IMHO the GT is an ugly looking brute with its dustbin (“ trash can,” across the pond) or garden incinerator styling, has “pass me the magnifying glass” air control holes, and a fiddly top filling system, until you get used to it.

I also found that some of my Innokin mods would not accept that there was a GT onboard even though the 510 pin on the tank protruded every bit as much as on an original Nautilus Mini.

All that said, once I got the hang of the thing, set the airflow fine, and replaced the sub ohm coil with a 1.6 Ohm it produced a very satisfying flavoursome vape with my usual 16 strength menthol chill juice firing at 8 Watts.

So much so that I decided to buy another three GTs which I managed after working my way through quite a lot of sites, which again featured the dreaded words “Out of Stock, “ Discontinued” or “Out of production.”

The GT is a heavy tank so it can be knocked over quite easily if mounted on a smaller mod like an iStick 30w. Many comments on forums various say it’s prone to leaking after filling, but I’ve always had the habit of holding any top filled tank tip downwards after filling and closing for a moment, so that may be why I haven’t had that problem.

As I wanted another full set of Nautilus tanks I decided to give the Nautilus 3 another chance.

The UK is still within the TPD rules and the big problem I found the last time I tried a 3 was its liquid capacity. As sold the tank” glass” ( actually plastic ) is inordinately thick walled and you cannot get even 2 mils into it, so you seem to be constantly refilling the thing,

However I found a seller offering “Fat Boy” replacement glasses as well as tanks, which I fitted to the two tanks I’d bought, and changed the coils to 1.6 ohm s before even trying vaping them, and I have to say my impressions of it last year have been proven to be wrong.


Again it took me a wee while before I got an air flow setting I liked, but once I’d got that sorted I can honestly say it’s suiting me fine as an MTL vape.

Like the GT it’s a heavy tank, and has the garden incinerator styling, though more elegantly done than the GT - so the two I have so far have earned their Right of Residence with me and I’ll get a third one next payday.

Hey Vaping Fam,

I just picked up the Steam Crave Titan V2 Box Mod 300W, and I’m blown away by the sheer power and performance this mod offers! If you’re looking for a device that can handle anything you throw at it, this is the one.

Here’s why I’m loving it:
300W of Power: This box mod delivers a massive 300W output, perfect for those who want serious cloud production and intense flavor.
Versatile and Reliable: The Titan V2 is equipped with a dual 18650 battery setup (sold separately) for longer-lasting performance. The mod is built to handle larger builds and higher wattages with ease.
Advanced Chipset: It comes with a new chipset that provides a range of features including temperature control, customizable wattage, and multiple safety protections for peace of mind while vaping.
Ergonomic Design: Despite its power, the Titan V2 has an ergonomic design that fits comfortably in your hand, making it easy to carry and use for long sessions.
Big Screen & Easy Navigation: The large screen makes adjusting settings a breeze, and you can easily switch between modes with a few clicks.

If you're into high-power mods and looking for a device that can handle big builds and high wattage, the Steam Crave Titan V2 Box Mod 300W is definitely worth considering. Have any of you tried it yet? I’d love to hear your thoughts!

Other kits you may prefer:
buy vape 40000 puffs
wynn bar 4 adjust 50000 review

Vaporesso XROS 5 Mini is the latest gem in the beloved XROS series. Designed especially for MTL vaping and nicotine salt lovers, this kit delivers a smooth, flavorful experience in a lightweight and stylish package.

Don’t let its size fool you — the XROS 5 Mini packs serious power. It features a built-in 1000mAh battery, giving you enough juice to vape confidently all day. And when it’s time to recharge, it’s quick and easy with USB-C fast charging.

One of the standout features is the adjustable airflow slider, giving you full control over your draw. Whether you prefer a tight, cigarette-like inhale or a slightly looser, airier puff, the Vaporesso XROS 5 Mini Pod Kit adjusts to match your style. The mesh coil pods (0.6Ω & 0.8Ω compatible) ensure rich, consistent flavor with every hit, and the clear pod design means you’ll always know when it’s time to top up — no dry hits, no surprises.

Refilling is a breeze with the easy side-fill system, making this kit perfect for beginners and seasoned vapers alike. Its compact body fits easily in your pocket or bag, while the wide color selection lets you match your vape to your vibe.

If you’re after a dependable, flavorful, and stylish pod kit for everyday use, the Vaporesso XROS 5 Mini is a fantastic choice. If you are interested in more, please visit the vape online store uk.

You may also be interested in:
https://vapesourcing.uk/easter-vape-sale.html

The Smok ARCO MAX Pod Kit elevates vaping versatility through its multi-resistance ecosystem. Centered on a 2.25-inch TFT interface with four themes(Ribbon/Rainbow/Pink/Turkey), The glossy zinc alloy frame and premium IML back plate create a bold yet refined aesthetic . The CD-textured navigation button ensures precise control across its 5-30W adaptive output, powered by a 1300mAh cell featuring 1.5A QuickCharge (0-100% in 30 mins).

Brand: Smok
Unit: 1Set
Size: 112.65*26*17.2mm
Battery Capcity: 1300mAh
Power Range: 5-30W (Max 30W)
Input Voltage: (3.3V-4.2V)±0.2V
Output Voltage: Max 4.25V±0.1V
Standby Current: <50uA
Resistance Range: (0.6ohm-2.5ohm)±5%
Charging Voltage: 5V±0.2V
Charging Current: Max 1.5A
Overcharge Voltage: 4.3V±0.05V
Overdischarge Voltage: 2.4V±0.03V
Filling Type: Top filling
Pod Capacity: 2ml/3ml(0.4ohm)
Package: Gift Box

Click here for more:
SMOK ARCO MAX Pod System Kit: https://www.healthcabin.net/smok-arco-max-pod-system-kit-p/30426.html

Taste NEW ARGUS Cartridges, Test the Limits Event is Here!

Hello dear friends, from April 17th to September 30th, share your ARGUS Top Fill Cartridge V2 experience on social media for a 100% chance to win amazing prizes in our daily draw!

Want to win even more? Post great content aligned with the monthly theme and you could take home the monthly grand prize! Each month, we’ll crown one Unlimited Challenge King, who will receive the top prize.

5 Epic Stages | Massive Prizes | Unlimited Fun!
Stage 1: Searching for ARGUS No.1

Unlimited Challenge King Prizes: A Louis Vuitton Bag!
Plus, tons of other amazing prizes up for grabs!

---

How to join:
Visit the official website and share for a daily lucky draw with a 100% chance of winning!


*Due to regulatory restrictions, users from some regions may not be able to participate in the activity.
**Participants must be of legal age in their country.

Hello! I'm looking for a "gold" drip tip to pair with a gold Ponte XL in a Stubby 21. Preferably a hybrid/integrated tip. However, one that is wide enough to cover the flush nut at the base would also work.

Thanks a lot!

AL Fakher Crown Bar 15K Pro is for vapers who want to ride in first class without overcomplicating things. It’s sleek, it’s satisfying, and it’s got a touch of class with that comfortable leather grip—yes, leather on a disposable, because why not elevate the experience?



With 18ml of e-liquid packed inside and a smooth 0.5% nicotine strength, this one’s made for cloud chasers who don’t want to get hit with a head rush. And thanks to its dual mesh coils, every puff is rich, warm, and full of flavor from start to finish. If you're into a good DTL vape but not into box mods and bottle juggling, this one’s got your name all over it.

The 600mAh battery keeps things going longer than expected, and when it’s time to recharge, the Type-C port gets you back in action fast (just bring your own cable). It’s a vape that looks premium, feels premium, and performs like it’s ready to impress. Enjoy more cheapest disposable vapes right now and get deals.

Grab the AL Fakher Crown Bar 15000 Pro today from the cheapest online vape store, where luxury flavor and practical prices go hand in hand—and your next upgrade is always just one click away.

You might also like:
jnr vapes
40000 puffs

Mr Fog DRT Kit isn’t just another pod system—it’s a leap into the future with one foot still planted firmly in simplicity. As the first pod system from Mr Fog with DRT (Dual Resistance Technology), it delivers a versatile vaping experience that adjusts to your mood and your coil.



Whether you’re feeling efficient or looking for a bold hit, the ECO and Boost modes let you toggle between chill and thrill with a single press. And with a 1400mAh built-in battery, this pod system isn’t here for short trips—it’s designed to run up to 100 hours on a full charge, which basically means it’s outlasting your weekend plans.

Let’s not skip the extras: a 2.5ml top-fill pod, adjustable airflow, and an HD color screen with 3 clean UI themes. The build is compact but tough, with scratch and drop resistance, so it keeps its cool even when you’re on the move. Pair it with a 0.4ohm pod, and it cranks out a punchy 30W max for those who love clouds with attitude.

The Mr Fog DRT Pod Kit is perfect for vapers who want power, style, and durability without juggling complicated settings.

Snag yours now from our online vape store, where cutting-edge gear meets fast shipping and everyday savings. Your next-level vape experience starts here.

Quick view:
easter vape sale 2025
mosmo sultan 50k

Hey there. I joined here years ago, and switched emails. So I had to create a new account. It's good to be back on here. I'm now managing a vape shop in my state. Just joined to help other vapers. But it's good to be back. I look forward to seeing what's new.

The Uwell Caliburn G4 Pod Kit redefines vaping excellence with its upgraded PRO-FOCS 4.0 flavor technology and GPP cartridges, delivering a 35% increase in cartridge lifespan and enhanced flavor satisfaction. Designed for versatility, it features dual vaping modes: Storm Mode for instant, powerful hits and Waves Mode for smooth, steady puffs. Customize your airflow effortlessly via a slidable valve or cartridge orientation adjustments, ensuring a tailored experience. With up to 35W output power and intuitive airflow control, the Caliburn G4 balances performance and convenience. Its sleek, compact design and user-friendly interface make it ideal for both new and experienced vapers seeking unmatched flavor and longevity.

Features:
1. Upgraded PRO-FOCS 4.0 technology for 35% longer cartridge lifespan and richer flavor.
2. Dual vaping modes: Storm Mode (instant power) and Waves Mode (smooth, steady puffs).
3. Adjustable airflow via slidable valve and cartridge orientation for personalized draws.
4. High 35W output power for intense vapor and consistent performance.
5. Sleek, ergonomic design with intuitive controls and portability.
6. Compatible with Uwell Caliburn G3 and GPP Pod Cartridges
7. Both for MTL/RDL Vaping

Click here for more:
Uwell Caliburn G4 Pod System Kit : https://www.healthcabin.net/uwell-caliburn-g4-pod-system-kit-p/30409.html

Hi all,
With talks of higher import tariffs on vape products, I wanted to open up a real discussion:
If the prices of your go-to vapes or e-liquids suddenly doubled, what would you do?

• Keep vaping no matter the cost?
• Cut back or try to quit?
• Go DIY?
• Switch to cheaper brands or pods?
• Start looking for bulk deals or stockpile now?

I know everyone’s got different habits and budgets, so I’m curious — where do you draw the line? Personally, $20+ for a single disposable would definitely make me think twice.

Side note: saw 8Vape has some clearance items right now, not sure how long that lasts with all this tariff buzz going on. Just throwing it out there for anyone who’s thinking of grabbing backups.

Would love to hear your thoughts — especially from those outside the U.S. too. Are prices changing where you are?

Hey Vaping Community,

I recently tried the AL Fakher Crown Bar 15K Pro Disposable Vape, and it’s quickly become one of my favorites! If you’re looking for a disposable vape that combines long-lasting flavor and convenience, this is definitely worth checking out.

Here’s why I love it:

15,000 Puffs: With up to 15000 vape puffs, you’re guaranteed a long-lasting vaping experience without worrying about constant replacements.
Flavorful and Smooth: The AL Fakher Crown Bar delivers smooth and consistent flavor with every puff, giving you a satisfying vape all day long.
Pre-filled and Ready to Use: This disposable vape comes pre-filled with high-quality e-juice, making it super convenient for on-the-go sessions.
Compact Design: The Crown Bar 15K Pro is sleek and lightweight, making it easy to carry around wherever you go.
Rechargeable Battery: For even more convenience, the device features a rechargeable battery, ensuring you can enjoy every puff until the very last drop of e-liquid.

If you're looking for a hassle-free, high-performance disposable vape, the AL Fakher Crown Bar 15K Pro is the perfect choice! Have any of you tried the AL Fakher Crown Bar 15K Pro? Share your thoughts below! Happy vaping!

Other kits you may prefer:
easter vape sale 2025
Solobar Mate 35K Disposable Vape sale

The Freemax Rexa Pod Cartridge might look simple on the outside, but it’s built like a vault for flavor. If you're rocking a device from the Rexa Series, this pod is the upgrade your taste buds didn’t know they needed.



First off, let’s talk options. With coil resistances ranging from 0.4Ω to 1.2Ω, this pod cartridge is made for flexibility—whether you're into smooth MTL or breezy RDL. It’s like having five pods in one, just waiting to match your mood. Plus, the multi-layer leakproof design keeps things clean and worry-free, even when your vape is rolling around in your pocket or bag.

The side-filling system is refreshingly straightforward—pop the plug, fill it up, and get right back to puffing. Whether you go for the 2ml or 3ml version, you're set for a solid session without needing constant refills. And the flavor? Classic Freemax quality—dense, rich, and totally satisfying.

So if you're tired of leaky pods, fussy refills, or one-size-fits-none setups, it's time to make the switch.

Snag the Freemax Rexa Pod Cartridge today from our vape shop, where premium flavor meets no-fuss functionality, and your next great vape is just a click away.

Quick view:
easter vape sale 2025
elf bar ice king 30k

Ghost Smart Vape 40000 Puffs, a revolutionary disposable vape designed for modern vapers who crave convenience, customization, and long-lasting performance. With an astonishing 40,000 puff capacity, this device is built to go the distance—perfect for those tired of constantly replacing their vapes.

What sets the Ghost Smart Vape 40000 Puffs apart is its smart technology. Featuring an LCD display, you can keep track of your battery, e-liquid levels, and power settings in real-time. Want a gentler hit or something bolder? No problem. With three adjustable power levels and customizable airflow, you can fine-tune each puff exactly how you like it.

Powered by a 1000mAh rechargeable battery and charged via USB-C, this device gets you back to vaping quickly and keeps going all day. The mesh coil technology ensures rich, smooth flavor from start to finish—no burnt hits, just satisfaction.

But that’s not all. Enjoy Bluetooth connectivity, Siri voice control, and even built-in games for those chill moments between puffs. And since it’s completely maintenance-free, there’s no need to fuss with refills or coil changes.

Sleek, smart, and seriously satisfying, the Ghost Smart Vape 40K is the future of disposable vaping—ready when you are. At the vapesourcing uk, we hope you can get the best flavour and cheap vapes.

I'd like to suggest:
prefilled pod vape kit
vaporesso xros 5

If you’re looking for a true knight in shining armor for your vape lineup, meet the Smoant Knight AIO Kit—a compact powerhouse built for performance, versatility, and just the right amount of flair. This boxy little warrior doesn’t play by the rules—it rewrites them.



With 90W of output power and a single 18650 battery slot, this refillable vape strikes a perfect balance between portability and punch. Whether you're running on VW, VV, DVW, BYPASS, or full temp control (NI, TI, SS, TCR)—you’re in total command. The latest ANT chipset ensures everything runs smooth, smart, and reliable, while the 0.49-inch OLED screen gives you the essentials without the clutter.

But here’s where it gets real: the Knight AIO is Boro-compatible, meaning it plays nice with most Boro tanks and setups. So if you're into customizing and love the freedom to build your own setup, this one's a dream come true. Add to that compatibility with Smoant’s K-series coils (from K1 to K5), and you've got a device that fits a whole range of styles and experiences.

The Type-C fast charging and simple single-button control seal the deal. It's powerful, flexible, and refreshingly easy to use.

Grab the Smoant Knight AIO Kit today from the cheapest online vape store, where bold tech meets better prices—and your next favorite device is always ready for battle.

You might also like:
50000 puffs
clearance disposable vapes

If you’re in the market for an elegant, pocket-friendly vape that delivers smooth hits without the bulk or complexity of traditional pod systems, the Joyetech eRoll Nano might just be the perfect fit. Joyetech has long been known for blending minimalism with functionality, and the eRoll Nano is a prime example of that design philosophy.

What’s in the Box?​

• 1 x eRoll Nano Battery (800mAh)
• 2 x eRoll Nano Pods (0.8Ω Mesh)
• 1 x USB-C Charging Cable
• 1 x User Manual
• 1 x Magnetic Charging Case (optional, depending on kit)

From the moment you open the package, the Nano lives up to its name. It’s slim, compact, and styled more like a luxury pen than a vape. The build feels solid and smooth, with a premium metallic finish that doesn't scream for attention — but definitely earns a second glance.

Design & Build Quality​

The eRoll Nano is incredibly portable, with a minimalist chassis that easily slips into your shirt pocket or small purse. It weighs next to nothing, but the aluminum alloy body gives it a sturdy, well-made feel. If you're a fan of clean lines and modern design, this is a device you'll be proud to carry around.

Vaping Experience​

Despite its small size, this little device delivers excellent vapor for an MTL (mouth-to-lung) experience. The 0.8Ω mesh coil provides consistent flavor and a smooth draw — not too tight, not too loose. It handles nicotine salts like a champ, offering a satisfying throat hit without any harshness.

The auto-draw mechanism is responsive and reliable — no button presses needed. Just inhale, and you’re good to go.

Battery & Charging​

Don’t let the compact size fool you — the 800mAh battery holds up surprisingly well for such a small device. It should easily last most casual users through the day. When it’s time to charge, the USB-C port ensures a quick top-up.

Pair it with the optional magnetic charging case, and you’ve got a powerhouse combo that lets you charge on the go without fumbling for cords or wall outlets.

Final Thoughts​

The Joyetech eRoll Nano isn’t trying to be everything — and that’s exactly why it works. It’s discreet, elegant, and reliable, perfect for beginners, office use, or as a classy backup device for experienced vapers. If you value simplicity with style, this device should definitely be on your radar.

Auguse Kwafoo is an MTL atomizer developed by Auguse in collaboration with Adult Tribe. It's essentially the more MTL-focused sibling of the Radiator, another Auguse atom released in late 2023 that gained solid popularity—so much so that its unique airflow system even inspired two German modders. This unit was sent to me for free by the shop MoreVaping. I’m not affiliated with them and I don’t receive any payment.



It has a 22 mm diameter and is made from high-quality 316 stainless steel with a polished finish. The weight is excellent for an atomizer in this price range—57 grams without the stainless steel drip tip, which adds another 5 grams. The stated capacity is 4 ml, but that doesn’t take into account the fairly wide chimney, and as we’ll see later, the actual usable capacity ends up being around 3.5 ml.
It comes in a black box, with Auguse's contact info printed on the back. As a modder, Auguse is very active in the MTL scene, releasing at least two or three atomizers each year.



Inside the box, along with the Auguse Kwafoo, you’ll find a spare tank made of highly transparent polycarbonate, with the same stated 4 ml capacity and identical dimensions to the pre-installed Pyrex one. There’s also a small bag containing a full set of air pins, provided in matching pairs of 0.8 mm, 1.0 mm, and 1.2 mm, plus a completely closed pin in case you want to seal off one of the two airflow holes. The 0.9 mm pins come pre-installed. Lastly, you get a selection of spare O-rings.



The stainless steel drip tip weighs 5 grams and has a 3.5 mm bore. At the base, there are three small heat-dissipating fins. It’s a solid MTL drip tip. The connection is standard-sized, and as a drip tip enthusiast, I’ve tested quite a few—everything fits flush without needing to swap out the O-ring.



The main selling point—and what sets this atomizer apart from most RTAs on the market—is its airflow system. First introduced with the Radiator, also developed by Auguse, this design has already inspired several well-known modders. It features an air pin with 10 airflow holes (don’t be misled by the number—it’s still a 100% MTL atomizer). Just to clarify right away: the airflow is "fixed", meaning that if you slightly loosen the airpin without fully tightening it down, you can get a slightly less restricted draw. However, the threading isn’t designed to be used that way, as it ends up feeling a bit wobbly.



The air pin fits into what is essentially the chimney, leaving a small gap that allows the airflow to pass through. As you'll see, the air pin threading is actually longer than the chimney itself, which means it can be unscrewed even with a full tank of liquid.
It really depends on how you choose to classify it. While technically a top airflow system, it delivers all the benefits of a side airflow atomizer—the coil is hit from the side—resulting in a truly excellent draw.



The Kwafoo’s tank section, in all its parts. The optional plastic tank is very well made, once installed, it almost looks like Pyrex thanks to its completely clear finish. Both tanks are listed as having a 4 ml capacity, but the actual usable volume is closer to 3.5 ml.
There are no threads on the tank itself; the seal relies entirely on the chimney threading and two O-rings.



Refilling is done exclusively from the bottom, with plenty of space, even when using twisted-cap bottles. You can also spot the two juice inlets that feed liquid through the drivers. Once in contact with the cotton, they allow for proper saturation. One of the advantages of this system is that it helps prevent burnt liquid contamination, similar to how drippers work, but with the added benefit of having a full tank.
On the chamber, just below the threading where the chimney screws in, you can see the gap where air reaches the air pins. On the tank section, the gap created between the actual chimney and the air pin, where the pin slides in and channels the airflow—is also visible.



The chamber-to-deck seal is handled by three O-rings (two of which are visible in the photo), perfectly sized and seated. The internal machining of the chamber doesn’t cut into them—a minor issue reported with the Radiator, but fully resolved by Auguse on the new Kwafoo.
The connection between the two parts is keyed, and easy to align thanks to a small notch engraved on the outside of the chamber, which lines up with a matching notch on the deck. Just above it, you'll find "Auguse" engraved, with "Adult Tribe" on the opposite side.



A first look at the deck with its four posts, even though it’s a single-coil design, and the interior of the chamber. The Kwafoo features a rectangular reduction due to its pure MTL design, whereas the Radiator had a slightly larger one. You can see one of the juice drivers, which, when in contact with the cotton, feeds it with liquid. It’s also clear that there’s only one position for the coil, as it needs to fit into that specific reduction.



The chamber reduction can be removed by pressing it from above using ceramic tweezers or any plastic tool; I would avoid using steel objects. The reduction also houses the two fixed juice drivers, which allow the liquid to be fed into the cotton, as well as the two airflow holes to channel air to the coil. Therefore, it’s not just an accessory for MTL vaping, but a crucial component for the proper functioning of the Kwafoo.



Once removed, the chamber reduction reveals the two O-rings that ensure the seal, along with the one at the base, while the center is where the airflow pin/top cap screws in. The air pin is engraved with its various sizes, in pairs: 0.8, 0.9, 1.0, and 1.2 mm. The seal is again handled by O-rings found in the spare parts, which need to be inserted.
Important: when reassembling the reduction, ensure that the air pins protrude as shown in the photo, where the chamber is placed next to the deck. If the air pins are recessed into the chamber, the quality of the draw will suffer.



The most important aspect when tightening the coil for the first time is to check how high it actually sits. Those two posts are meant to hold the cotton in place. If you use them as a reference for positioning the coil jig, the coil will sit too low, and the airflow won’t hit it correctly, resulting in a harsh draw. The legs should be tightened gently to raise the coil by about 1 mm compared to its position when resting on the cotton holders.
To properly check the height, remove the chamber reduction and place it on the deck without the air pin to get a true sense of the coil's height. This step only needs to be done once; once you’ve understood the correct height, it’s very easy to replicate it.



Be careful not to raise the coil too much, as you risk it touching the upper corner of the chamber.
The cotton wicks, on a 2.25 mm coil, are already high enough to receive liquid from the juice drivers. The cotton posts hold the cotton in place, so there’s no need to press it inside. To trim the wicks, simply place the scissors parallel to the external cotton posts and cut. There’s no need to leave or drop the cotton down.



On the bottom, you’ll find the Auguse logo, the serial number, and the Kwafoo name engraved.
Lastly, using a flathead screwdriver, you can unscrew the steel pin (without the gold plating) to release the positive post. There’s a notch that seems designed to accommodate an O-ring, but the insulator is already installed inside the 510 pin, so there’s no need to add another one, as the coil readings are stable and precise.



Trying the Kwafoo, after years of knowing Auguse, was fun both for the novelty of the airflow system and for its ease of use. The liquid flow is very steady thanks to the cotton posts positioned at the ideal height. Getting the perfect draw requires a bit of trial and error, but once you figure it out, building is easy. The flavor production is definitely old-school, appreciated by long-time vapers used to the small chambers of the early cotton RTA’s that offered good flavor clarity.
For those who want to start rebuilding and don’t want to spend too much, since tools also need to be bought, the Kwafoo is an excellent budget atomizer to begin with. Lastly, the airflow system is a nice innovation that has already inspired other European modders.

The Auguse Kwafoo RTA is available on MoreVaping, a well-stocked shop offering a wide range of vaping products: Auguse Kwafoo 22ml RTA

I’d like to thank MoreVaping for the gift of the Auguse Kwafoo, as well as the community and staff of E-Cigarette Forum for allowing me to share my thoughts.

---

---

---

---

• 5 Clicks to turn on the device.​
• With the wattage up and down buttons, we can increase or decrease the wattage in steps of 0.1W up to 25W, from there it goes in steps of 1W up to a maximum of 60W. Once it reaches the maximum, it warns us with "MAX OUTPUT" and it doesn't have a cycle, that is, it doesn't return to its minimum (1W), something curious, although we could say intelligently, is that once we have reached 1W, if we lower the wattage again, we go to 60W, that is, it does have an "inverse cycle."​
• 5 Clicks once turned on will take us to a menu, where we can navigate using the wattage adjusters;​

• Brightness, as the name suggests, we can change the brightness of our screen. The brightness is configured so that 1 is the lowest possible and 5 is the highest. I generally keep it at 5 as I think it's not noticeable and it's not worth keeping it at 1 just to gain some extra battery life.​
• Update, there is nothing available for now, but I suppose it will serve in the future to update the firmware of the device.​

• Battery indicator.​
• 4-digit puff counter.​
• Power indicator, in Watts or Volts.​
• Ω indicator.​
• Voltage indicator, if we are in Wattage mode.​

• Soft, starts at 75% of the power we set and progresses gradually up to the indicated value. That is, if we vape at 42W with the soft curve, the first half-second of the puff is at 25.2W, the second half will be at 29.4W, and so on.​
• Normal, is the "no curve" mode, it maintains the power linearly.​
• Hard, starts at 125% of the power we set and gradually decreases to 100%.​

• Wattage Mode, the classic Wattage mode, shows us the screen information in the image above.​
• Voltage Mode, the same as Wattage but with Volts.​
• Temp Mode, the screen information changes, replacing the power with limit degrees. On the right side is where we now find the power in watts. It is valid for coils with SS316L, NI200, or TCR materials. When entering this mode, it asks us for the ambient temperature of the room, as well as whether we want to choose Celsius or Fahrenheit.​
• VT Coil Mode, this is a specific mode for YiHi SXmini VT coils, they promise an Anti Dry Hit with this mode, something I haven't been able to test at all.​

---

---

---

so I have been smoking disposables for like five years now just because I have preferred them for some reason I just like the way they hit and I’ve been smoking a specific flavor (the best flavor ever) airbar diamond coconut creme brulee and out of nowhere all the vape shops just stopped getting them in. They are sold out online. I think they are discontinued but some shops say their back ordered so not sure. They’re sold out everywhere within 100 miles of me. I’ve been calling everywhere like a crazy person and any other vape I try is just disgustingly fruity and nasty to me. I think I’m gonna have to switch over to liquids. Does anyone know a flavor that is similar to that if they’ve tried it or know a coconut and crème brûlée flavors maybe that I can mix? Any help would be greatly appreciated or if anybody happens to know where I can find these still please let me know!!! thank you all

just saying hi! new member here

Get ready for the Vapesourcing Easter Vape Sale happening from April 16th to April 22nd!

This is your chance to snag some fantastic deals:
$20 Off orders over $95
$40 Off orders over $160
Use code: EASTER to grab these amazing discounts!

Plus, enjoy Free Shipping on orders over $95 (only for shipments from the USA Warehouse, after discounts).

Don’t miss out—this Easter sale ends April 22nd. Head over to Vapesourcing, the best online vape shop, and stock up on your favorite vape gear before the deal expires! Happy vaping!

Other kits you may prefer:
vaporesso xros 5 mini
vaporesso xros 5