INNOKIN ENDURA S1 REFILLABLE, RECHARGEABLE DISPOSABLE review by hittman

Hello and welcome. I’m back today with another review for you on an Innokin product. I was sent the Innokin Endura S1 by Innokin in order to provide you with a fair and honest review. The Endura S1 is a refillable, rechargeable, disposable device. I’m not really sure I would even call it a pod device since it doesn’t have a replaceable pod and is really all one piece. The S1 has a pre-installed tank with a 2ml liquid capacity and an .8-ohm kanthal mesh coil to optimize battery life. The battery capacity is 650mah. I didn’t see a charging rate given for the S1 in the online specifications but the user manual gives a rate of .55A. I can see where this one might be a good option instead of buying prefilled disposables that can get quite expensive. The S1 is rated for 7000 puffs.

FjqKaAb.jpg


nHPbz9K.jpg


WHAT’S IN THE BOX?

1 × Innokin Endura S1 Disposable Pod Kit

1 x User guide





SPECIFICATIONS AND FEATURES:

• Tank Capacity: 2ml

• Dimensions: 18.5*101mm

• Battery: 650mAh

• Power Output: 3.6V

• Resistance: .8-ohm Mesh Coil

• Puffs: 7000

• USB-C Cable

• Refillable

• Greener Solution

• Cost Effective

Tusc1Xm.jpg


kc1CwHu.jpg


Jcyqrv7.jpg


clpf8Kk.jpg


wT8Xicz.jpg


YJJELKK.jpg


ZdT13Oj.jpg


INITIAL THOUGHTS:

To be honest, I knew almost nothing about the Innokin Endura S1 before receiving it. I thought it was just another standard pod device, but it is in fact a refillable, rechargeable, disposable pod device that is all one piece and the pod is not removable. It has a built-in 650mah battery and provides a constant output of 13.5 watts.

The packaging for the S1 is quite basic but Innokin appears to have kept with the recyclable materials used for packaging. The front of the box has a color picture of the S1, the Innokin and Endura S1 names near the top, the color version stated, some features, and a large warning that appears on the bottom of both sides of the box. The back side of the box states that it is for sale only in the United States. There is a contents list which is short because the only thing included in the box is the S1 device and a user guide. There is no charging cable or anything else included. They obviously want you to know that they are rating the S1 at 7000 puffs since it is printed on the front and the side of the box.

1690135201616.png


1690135221418.png


To remove the device, you need to cut the paper stickers located on each side at the bottom of the box. In the picture above you can see that the one on the left had been cut while the one on the right had not. Once these are cut then the tray can be slid out to get the S1 out of the package. The S1 is auto draw only so there is a sticker on the bottom of the device to block the airflow so it cannot be activated accidentally before filling. Once the sticker is removed then you can see that there is one air inlet hole in the bottom and a single LED light as well as the USB-C charging port. The charging rate listed in the user guide is .55A and I have a Klein USB tester and it reads .56A while charging which would be right on track with the specification listed.

1690135258150.png


1690135282847.png


1690135310588.png


As far as branding goes on the S1, the Endura S1 name is printed on the side with the flat surface and the fill port plug. The Innokin name is printed on the opposite side. I like that the S1 has a flat side on the face which makes it easy for me to orientate the S1 without looking at it. Where this comes into play is that the mouthpiece is flat and if I hold the S1 with my thumb on the flat side then the mouthpiece is aligned correctly to take a puff. You can see the shape of the mouthpiece in the third picture below.

The dark pod portion on the silver version that I receive is a little too dark in my opinion and makes filling without over filling a little difficult as it’s hard to see the liquid level unless held under just the right light. The pearl version I received has a clear pod section which I prefer and can fill with no issues. I commonly use 10 and 50ml bottles that use the same tip and had no issues fitting the bottle tips in the S1 for filling. Due to the positioning of the fill port, I found it a little difficult to fill the pod completely without spilling. It has a 2ml capacity and I’m guessing that the fill port position is taken into account when this capacity was given. In the user guide it is recommended to keep the pod at least 1/3 full for optimum performance.

1690135347823.png


1690135368702.png


1690135399425.png


The bottom of the S1 has a single LED light that indicates the battery level. I didn’t see in the user guide where it said what level of battery the light indicated but do know from use that it is green and then transitions to red which I took as an indication that it is time to recharge the S1. The guide says the red light will flash 10 times when recharging is needed but I charged once the light turned red since I didn’t want it to die while out and about. I did notice that the S1 got pretty warm while charging using a wall wart and my charging cable since none was included. The LED flashes red while charging and turns solid green once fully charged.

1690135443457.png


FINAL THOUGHTS:

The Innokin Endura has performed flawlessly while testing it the past couple weeks. The auto draw function has worked without error and the flavor and vapor production have been respectable for a device of this type.

I started out using the silver version with a mixed mint liquid that I commonly use for pods at work. It is a 15mg strength liquid and I got a very nice throat hit and surprisingly larger vapor production than my normal pocket carry device. I had gone through about five refills at the time of writing this review and expect the S1 to last quite a long time with this liquid since it has a low flavor percentage and has no added sweetener. Many people don’t think about this but sweet liquids and added sweetener can greatly affect the life of a pod or coil.

I used an RY4 Cream recipe in the pearl version. I immediately liked the pearl version better since it has a clear pod. It makes it much easier to fill. The RY4 mix is a sweeter flavor but does not have any added sweetener. I had my fourth refill in it while writing this review. I have not noticed any reduction in flavor or vapor production at this point. This might be needless to say, but I experienced no leaking while using either device. This makes sense as it’s pretty much a sealed unit. I did notice that the fill port plugs on these seem to be of better quality than I see on many pod devices and are easy to pull up to remove for filling.

I was honestly surprised at how long the battery seemed to last on these. I kept expecting the red light to turn on, but it stayed green for what seemed like quite a long time. I’m not normally a disposable user but feel like the Endura S1 is a happy medium between a disposable and an open system. It allows users making the switch from smoking to choose their own liquid flavors to use instead of being restricted to whatever the manufacturer makes available. One thing I don’t know and really didn’t see any indication of in the promotional material is if any part of the S1 can be recycled. Normally I wouldn’t even mention it but Innokin has become known for their recycling efforts.

Overall, the Endura S1 has performed well and have no problem recommending it if someone is looking for this type of device. I’d like to thank Innokin and Alisa for sending the Innokin Endura S1 samples for this review. Thanks as always to the readers and below is a link to the product page. Feel free to browse the Innokin website to view all of the quality products that they offer.

Endura S1 - Vape Pod | INNOKIN®





Naked 100 Tobacco Series from nonsmoker/nonvaper's nose?

I wondered if there were any nonsmokers/nonvapers or smokers/vapers that would be willing to ask a nonsmoker/nonvaper, or heck, any smokers/vapers willing to discuss what the Naked 100 Tobacco series smells like, notably Euro Gold and Patriot. I make many of my own fragrances, and I am afraid that these juices make my homemade soaps/perfumes smell like cheap perfume. I'm in NY and am having trouble finding true unflavored, so it's either keep puffing away with the tobacco line or resort to disposables (which I don't care for because of multiple reasons and the effort would be self-defeating). What does the tobacco line smell like to you?

  • Question
Profile X RTA Wicking

Hey guys, I've gotten the Wotofo Profile X RTA about a month ago and I'm wanting to know whats the best wicking methods you guys use on yours?

I've realized that the traditional methods don't work so good on this rta, my meshes keep getting burnt out in a few days. I'm using the nexMesh Extreme .16ohm 60-80W they read at .13ohms and I've started vaping them at 52-55watts using a Freshmint 70/30vg/pg juice.

The wicking method that I have installed currently is lots of cotton directly under the mesh and thinned and combed out ends with the bottom half cut out, I'm testing 2 variations of this at the same time, on one side I have it extremely thinned out and long with a low shoulder and the other side is a little thicker and shorter with a higher shoulder. After about 3 days I've noticed that the mesh is black on the thicker shorter side and its completely clean and new on the thinner longer side also I've only noticed bubbles coming out of this side(thinner side) and absolutely none on the other side.

Anyone has gotten the wicking method of this mesh RTA down completely?

The Dovpo/BPMods AMP BB - Well thats...weird...

The AMP BB is a new type of boro tank device (mod) from BP Mods which takes a vastly different approach to your standard borotank device.

CHAPTERS

00:00 - Intro and specs
02:00 - Close Up
09:00 - Vape
11:00 - Thoughts

Social Media - Vaping With Vic | Twitter, Instagram, Facebook | Linktree

Rumble - https://rumble.com/v30t6uq-the-dovpobpmods-amp-bb-well-thats...weird....html?mref=z0wfa&mc=kybb8

YouTube - Login to view embedded media
  • Like
Reactions: Izan

Do you buy multiple devices of the same mod?

Im just curious has anyone ever liked a mod so much you end up buying another or more to have future backups?
Yesterday i walked into my local vape shop and what do i see?
I see they had 1 odin v2 left i right away bought it without thinking twice lol cause i kno this mod is currently sold out everywhere, but i already have a odin v2 its my fav mod tho maybe of all time even..
Anyway i couldnt believe my eyes as soon as i saw it.
Cause if i didnt it prob be very hard to get another one for at least a little while

Anyone else have done this with a certain mod they love?
I rly like odins form factor

SADBOY - STRAWBERRY JAM

SADBOY - STRAWBERRY JAM
Producer: USA
Longfill - 30/120ml
Once again I have the "sad boy" from juicyvapour. This time it's a strawberry jam formation, which according to the descriptions will not be just a regular jam, there are other flavours to be found in it. As is my habit, I always spy on the particular test item on the manufacturer's site, as well as on other major forum sites. The descriptions are very mixed, strawberry shortcake, sugar cookie, biscuit, jelly cookie, freshly baked butter sugar cookie and many other variations which doesn't really make the choice easy.
The smell reminds me of a strawberry lightly vanilla cake. A nice, not too strong, snackable cookie . The flavour is sweet strawberry with a bit of cakey support in the background, but not too strong. The strawberries are there, but not in a jam state, I would say sweet rather than sweet, it's like a jelly on top of the cake. The cake part is not so identifiable for me. I couldn't tell if it's sponge cake or biscuit, it's not obvious, but it's there and blends nicely with the fruit. The more I suck on it, the more it becomes clear that it's a sponge cake taller, without the chocolate. I know it's the umpteenth variation, but I think this is the one that it most resembles. That being said, what you get is a very pleasant strawberry shortcake, not too sweet, but quite tasty, perfect for all day use. Strawberries and others for steaming up, I'm impressed with the manufacturer's product, thanks for the opportunity to the guys at juicyvapour.

Attachments

  • sadboy-strawberry-jam-longfill-aroma-1000x1000.jpg
    sadboy-strawberry-jam-longfill-aroma-1000x1000.jpg
    93.4 KB · Views: 27
  • Like
Reactions: gloopdegurp

Blaze Magna Disposable (7000 Puffs )


Blaze-New-Arrival (2).jpg


BUY NOW! Blaze Magna Disposable (7000 Puffs )

FEATURES:

  • 7000 Puffs
  • 5% Nic
  • 14ML E-Liquid
  • 550 MAH Rechargeable Device
  • Variety Of Flavors

Prime-Sale (2) (1).jpg
PRIME SALE
USE COUPON CODE (PRIME) TO GRAB 20% DISCOUNT ON E-LIQUIDS, COILS & PODS TILL 1ST AUGUST 2023

Our Brands

Attachments

  • Blaze-New-Arrival (2).jpg
    Blaze-New-Arrival (2).jpg
    211.4 KB · Views: 11

The Cue Vapor Cue Starter Kit - He ain't heavy...he's my pod kit...

The Cue Vapor Cue Starter Kit is as the name suggests a pod device tailored to the smoker. Unlike the vast majority of other pods on the market though, this one is made from full zinc alloy which means...yup..its a heavy.

CHAPTERS

00:00 - Intro and specs
01:00 - Close Up
05:00 - Vape
06:00 - Thoughts

Social Media - Vaping With Vic | Twitter, Instagram, Facebook | Linktree

Rumble - Login to view embedded media
YouTube - Login to view embedded media

Comming Soon!! Innokin ArcFire Pod System Kit 650mAh 3ml

Innokin ArcFire Pod System Kit features Powered by a 1400mAh internal battery, the durable body is made of Aluminum,the 3ml pod cartridge has an integrated 0.8ohm coil and features a side filling design. It has no adjustable airflow and captures a semi-restrictive MTL vape.
innokin-arcfire-pod-4.jpg

Brand: Innokin
Device Dimensions: 22.5*18.2*93.8mm (without pod)| 22.5*18.2*112.9mm (with pod)
Color of Product:Green Forest, Ocean Horizon, Cosmic Pink, Stellar Black, Nebula Grey, Galactic Silver
Battery mAh:650mAh
Minimum / Maximum Wattage:0.8ohm Pod: 14.5W, 1.2ohm Pod: 10.0W
Minimum / Maximum Voltage: 3.4V
Cut off time:10s
Max.Output currency : 5.0A
Resistance range: more than 0.8ohm
Body Material: Aluminum
Charging Current:750mA/DC5.0V
Battery capacity indicator
When battery less than 15%, 1 light on;
When battery 15%-65%, 2 lights on;
When battery more than 65%, 3 lights on;

Click here for more:
Innokin ArcFire Pod System Kit : Innokin ArcFire Pod Kit

Coming Soon: SMOK Pozz Pod Kit

SMOK products can always cause a trend in the market, just like this classic SMOK Pozz Pod Kit, with a flat product design, and excellent product performance, has become the leader in tobacco.
smok-pozz-kit_(4).jpg


Features
• Dimensions: 103.5mm by 30.2mm by 11.4mm
• Battery Capacity: 630mAh
• Max Wattage: 1-25W
• Voltage Range: 0.8-4.0V
• Resistance Range: 0.6-2.5ohm
• Charging: Type-C Port
• Operation: Draw-Activated
• Pod Capacity: 2mL
• Construction: PCTG
• Coil Support: 0.8ohm POZZ Coil
• Coil Installation: Integrated

The excellent battery Capacity of 630mAh, the maximum output watt count of 25W, and the Pod Capacity of 2ml all make it a very effective presence in small tobacco devices. With an integrated coil design, you don't need to replace the coil, you just need to prepare the same POZZ pod cartridge, which is magnetically connected to the pod.

The 1-inch display can display customized wattage, and power consumption, even though it is light, small, and easy to carry, all the basic functions are complete. I trust SMOK brand very much. It was established in 2010. As a world-class e-cigarette brand, SMOK has been insisting on product quality and safety for 13 years and serving customers wholeheartedly.

Of course, if you are interested in other types of cigarettes, or even the hottest e-cigarettes on the market, we also have a wide selection of the best vape shop online.

Related kits we recommend:
eb bc5000
mo5000 lost mary

Vaporesso XROS 3 Kit New Colors Giveaway, 1 winner, ends on Aug. 3rd, 2023




XROS 3 Kit is the new pod system in XROS family. It is equipped with a new 0.6ohm mesh pod to provide you sweeter vaping experience. And the new 0.6ohm pod is compatible with the whole XROS family. XROS 3 features 1000mAh battery and type-c charging port. What's more, with COREX Heating Tech, it can offer more rapid and even heating. It supports Pulse Mode to boost the power and. Featuring SSS leak resistant tech and top filling system, XROS 3 is more convenient for you to use.

Vaporesso XROS 3 Kit New Colors Giveaway, 1 winner, ends on Aug. 3rd, 2023

Enter here

In stock: Lost Mary OS5000 Frozen Edition Disposable

Vape the smoothness of our Lost Mary OS5000 Frozen Edition disposable vape kit, pre-filled with 10mL of our finest e-liquid at 50mg nicotine strength and with a battery capacity of 650mAh. Enjoy up to 5000 puffs and have the ultimate frozen vaping experience.
lost_mary_os5000_frozen_edition_disposable_kit_(2).jpg

Features:
Puffs: 5000
E-Liquid Capacity: 10ml
Battery Capacity: 650mAh
Nicotine Salt: 4% / 40 mg

Ready to go, start puffing away and be lost in the pleasures of the OS5000! The Lost Mary OS5000 Frozen Edition is a disposable pods known for its sleek design and convenient usage.

With a focus on providing a refreshing and cool vaping experience, the Frozen Edition offers an array of enticing frozen vape flavors that are sure to delight your taste buds. These flavors combine the classic tastes of various fruits and menthol to create a satisfyingly icy sensation.

Whether you're craving a chilling blast of frosty watermelon, a tangy and frost-covered blue raspberry, or the invigorating blend of frozen grapes, the Lost Mary vape Frozen Edition has you covered.

Each puff delivers a burst of flavor and a cooling effect, making it a popular choice among vaping enthusiasts looking for a refreshing twist.

Other kits you may prefer:
watermelon ice elf bar bc5000 ultra
tropical rainbow blast elf bar bc5000 ultra

Discover the AIRIS NEO P8000 Single-Use Kit: Unleash 8000 Puffs of Flavorful Vaping

Introducing the AIRIS NEO P8000 Disposable Kit, a compact powerhouse that guarantees an extraordinary vaping adventure. With its customizable airflow, battery indicator, and an impressive 8000 puffs, this exceptional device combines taste and convenience in one sleek package, designed to elevate your vaping pleasure to new heights.

neo.png


Immersive Features That Set the NEO P8000 Apart


Powerful Nicotine Strength: Immerse yourself in the rich flavors of the NEO P8000, featuring a robust 5% (50mg) nicotine strength. Each puff delivers a satisfying hit that strikes the perfect balance between smoothness and intensity, leaving you craving for more.



Extended Vaping Delight: Equipped with a reliable integrated 650mAh battery, the NEO P8000 ensures long-lasting performance that won't disappoint. Keep track of your power level with the battery indicator, ensuring uninterrupted enjoyment of your vaping sessions.



Customizable Airflow: Tailor your vaping experience to perfection with the adjustable airflow feature. Achieve smooth draws and personalize your vapor density, allowing you to fine-tune your device to match your unique preferences.



Swift Charging with Type-C: Bid farewell to lengthy charging times. The NEO P8000 comes with a Type-C charging cable, ensuring rapid and efficient recharging, so you can focus on what matters most - indulging in sensational vaping moments.



Consistent Vapor Delivery: Immerse yourself in a world of flavor with the 1.0 ohm Mesh Coil. This cutting-edge technology guarantees a smooth and consistent vapor delivery, preserving the authentic essence of each puff.



Uncompromising Safety: Your well-being is paramount. With the Airis Pure Core chipset, the NEO P8000 prioritizes safety with its six protection features, providing you with the peace of mind you deserve.



Unboxing Your NEO P8000 Disposable Kit:


1 x AIRIS NEO P8000 Disposable Device: Experience the pinnacle of vaping pleasure with an impressive 8000 puffs of pure excellence.

Type-C Charging Cable: Enjoy the convenience of rapid recharging, ensuring minimal downtime.

User Manual: Dive into the comprehensive guide, which unveils the full potential of your device and its features.

Attachments

  • neo.png
    neo.png
    1 MB · Views: 57

Vaping and Health: Dispelling Misconceptions and Recognizing Potential Risks

In recent years, the popularity of vaping as an alternative to traditional tobacco smoking has skyrocketed. However, along with its increased popularity, there has been a notable influx of misinformation and misconceptions surrounding this practice. The health implications of vaping have become a subject of extensive debates and discussions. The purpose of this article is to dispel common myths and provide a comprehensive understanding of the risks associated with vaping, allowing for a more informed perspective on this topic.

Myth #1: Vaping is Completely Harmless

One of the most prevailing myths about vaping is the belief that it is entirely harmless. While it is generally accepted that vaping is less harmful than traditional smoking, it is important to recognize that it is not entirely risk-free. E-cigarettes and vape devices still contain chemicals and substances that can be detrimental to health. The primary concern lies in the inhalation of aerosols, which can contain harmful chemicals, heavy metals, and potentially addictive nicotine.

While it is true that e-cigarette vapor does not contain tar or carbon monoxide, two of the most harmful elements in tobacco smoke, it is crucial to note that it does contain certain chemicals, albeit at much lower levels compared to traditional cigarettes.

Myth #2: Vaping is Safe for Everyone


Another misconception is the notion that vaping is safe for everyone, including non-smokers and young individuals. It is important to understand that vaping is not recommended for non-smokers, as it can introduce nicotine addiction and other potential health risks. For young people, the use of e-cigarettes can have serious consequences, as their developing brains may be more susceptible to nicotine addiction and other adverse effects.

Myth #3: Vaping Helps People Quit Smoking

While some smokers have successfully used vaping as a tool to quit smoking, the evidence supporting its effectiveness as a smoking cessation aid is still inconclusive. The U.S. Food and Drug Administration (FDA) has not approved e-cigarettes as a smoking cessation method, and many health organizations recommend approved nicotine replacement therapies for those attempting to quit smoking.

Understanding the Risks:

Nicotine Addiction:
Vaping devices often contain nicotine, which is highly addictive. Regular use of nicotine-containing e-cigarettes can lead to dependence and may make it challenging for users to quit.

Respiratory Health: Inhaling the aerosols produced by vaping devices can have adverse effects on the respiratory system. The fine particles and chemicals in the aerosols may cause lung irritation and inflammation, potentially leading to respiratory issues.

Unknown Long-Term Effects:
As vaping is a relatively recent phenomenon, the long-term health effects are not yet fully understood. Continued research is necessary to determine the potential long-term risks associated with vaping.

Nicotine Poisoning: Accidental ingestion or exposure to high concentrations of nicotine in e-liquids can lead to nicotine poisoning, especially in young children and pets.

Quality Control Issues: The lack of standardized regulations in the vaping industry may result in variations in product quality and safety. Some vaping products have been found to contain harmful substances or contaminants.

Conclusion:


While vaping may be perceived as a potentially less harmful alternative to traditional smoking, it is crucial to separate fact from fiction. Vaping is not entirely risk-free, and its potential health implications require careful consideration. Understanding the risks associated with vaping is vital for users to make informed decisions about their health and well-being.

As research on vaping continues to evolve, it is essential to stay informed by relying on credible sources and seeking guidance from healthcare professionals when considering vaping as a smoking cessation aid or recreational activity. By dispelling myths and acknowledging potential risks, we can promote responsible vaping practices and prioritize our health and safety.

UK Review: R And M Twister 7000 Disposable Vape

The R And M Twister 7000 Vape is an amazing portable device with several exciting features. It adopts a cup design, which is stylish and compact, and easy to carry. Built-in high-quality pre-installed e-liquid, ready to use, allowing you to experience convenience without complicated operations.

Not only that, r and m uk twister 7000 can also provide up to 7000 puffs of long-lasting smoke, allowing you to enjoy it to your heart's content. It is suction-activated and can be activated without pressing a button, making use even easier and smoother.
r-and-m-twister.jpg

In addition, you can choose from a variety of delicious flavours: Blueberry Raspberry, Cherry Coke, Lemon Lime, Strawberry Watermelon and Gummy Bear, no matter which flavour you like, the R And M Twister 7000 can satisfy your taste needs.

Hope you could pay more attention to it, and we will present this type of vape at our online vape store.

Hot-sale Vape Online:
https://vapesourcing.uk/vaporesso-luxe-xr-max-kit.html

Aspire Flexus AIO Review By Frenkyou

Aspire-Flexus-AIO-MTL-Kit-1.jpg


Hi, today let's take a look at the Flexus AIO MTL Kit sent to me by Aspire. In this Test I will examine each of the characteristics that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Aspire Flexus AIO MTL Kit; Before starting, let's see together some special features indicated by the manufacturer:

• Guaranteed to stand out
• New timeless design
• Flexus flavor in its DNA
• Long lasting battery
• Smart adjustable 3 power levels
• Rotate to adjust the airflow
• Intelligent LED indicators
• 7 classic colors to suit your taste
• Top Fill with screw opening
• Compatible with AF Meshed, MTL or RDTL coils
• Aspire ASP chipset with security protections

Aspire-Flexus-AIO-MTL-Kit-2.jpg


► Aspire Flexus AIO MTL Kit; Packaging:
On the front, the package features the image of the Flexus Aio in the centre, the name of the brand, a sticker indicating its color and the motto "Flex Your Taste". On the back of the box are; content indications, warnings for minors, address of Shenzhen Eigate Technology Co,Ltd and some icons related to trademarks and legal logos. Laterally on the edges of the package, are reported; the main characteristics in the form of icons, the Batch number, the color indication of this sample (Blue), the anti-counterfeiting hologram, the scratch/check.

Aspire-Flexus-AIO-MTL-Kit-3.jpg


Aspire-Flexus-AIO-MTL-Kit-4.jpg


► Aspire Flexus AIO MTL Kit; Packing List:
• 1x Flexus AIO device
• 1x Flexus AIO Pod
• 1x AF Coil 0.6Ω
• 1x AF Coil 1.0Ω
• 1x USB-C cable
• 1x User Manual

Aspire-Flexus-AIO-MTL-Kit-5.jpg


► Aspire Flexus AIO MTL Kit; Specifications:
• Dimensions: 121 x 35 x 26.6mm
• Weight: 124.25g
• Material: Zinc Alloy
• Battery: Integrated 2000mAh
• Capacity: 4ml
• Compatible with all AF coils
• Compatible with Flexus Stik pods
• 3 power levels
• Adjustable airflow
• Fast charging with USB-C
• Automatic shooting or via fire button

Aspire-Flexus-AIO-MTL-Kit-6.jpg


► Aspire Flexus AIO MTL Kit; Available colours:
• Silver
• Blue
• Red
• Viola
• Rose
• Black
• Rainbow

Aspire-Flexus-AIO-MTL-Kit-7.jpg


► Aspire Flexus AIO MTL Kit; First Impressions:
Flexus Aio is a new vaporizer with a sleek and compact form factor, coupled with a high-quality finish. It fits perfectly in the palm of your hand and is ready to use in an instant. Inheriting the flavor DNA of the Flexus series, the Flexus AIO can offer optimal MTL operation and pure flavor. The secret lies in Aspire's famous AF Coils. With a long-lasting 2,000mAh battery, the Flexus Aio frees you from low-battery anxiety. Furthermore, its effectiveness for MTL vaping is ensured with the adjustable rotating airflow and adjustable wattage in 3 power levels. Undoubtedly Aspire Flexus Aio is a small and elegant device that is very simple to use and promises high performance, however as you can see in the image below Aspire does not forget RDL/DTL users, and in this regard it has decided to put another interesting device on the market; it's about BP Stik 80W, here my review: Review

Aspire-Flexus-AIO-MTL-Kit-8.jpg


Flexus AIO on the bottom has a rubberized base with a generous shape for a good grip, this allows the device to rest softly and remain firmly upright even during the charging phase. On the rubberized base are shown; the CE mark, the disposal logo.

Aspire-Flexus-AIO-MTL-Kit-9.jpg


The large 2,000mAh internal battery guarantees a considerable vape autonomy and requires a recharge time of about 40 minutes to reach 3.8V of charge, while it takes about 60 minutes to reach a full charge of 4.2V. During recharging, the 3 LEDs in the lower quadrant keep you constantly informed on the current battery charge level.
• 3 LEDs on: The charge level is between 3.8 and 4.2V (60-100%)
• 2 LEDs on: The charge level is between 3.5 and 3.8V (30-60%)
• 1 Led on: The charge level is equal to or less than 3.5V (0-30%)

* Furthermore, during use, the combined action of the 3 LEDs joins that of the upper LED positioned on the Fire button, in this case the upper LED lights up as follows:
• Green LED: The charge level is between 3.8 and 4.2V (60-100%)
• Led Blue: The charge level is between 3.5 and 3.8V (30-60%)
• Red Led: The charge level is equal to or less than 3.5V (0-30%)


Aspire-Flexus-AIO-MTL-Kit-10.jpg


► Aspire Flexus AIO; 3 power levels:
The ASP Chipset automatically detects the coil inserted by selecting the most suitable power for it. In addition, the ASP chip allows the user to select three different power delivery options using the small "MODE" button. During power adjustment, the 3 LEDs in the lower quadrant light up as follows:
• 1 White LED lit: The selected power level is Low.
• 2 White LEDs lit: The selected power level is Medium.
• 3 White LEDs lit: The selected power level is High.


Aspire-Flexus-AIO-MTL-Kit-11.jpg


For this test Aspire sent me Flexus Aio in Blue color version. The Blue color has been applied to the aluminum parts that make up the frame. The frame of Flexus Aio has a very nice aesthetic function, it also acts as a real armor to protect the device from shocks. On the rear and side profile, the transparent plexiglass part shows an underlying gray texture with hypnotic wave motifs, small and minimally invasive white identification writings elegantly complete the design. On the back, at the top, we find the adjustable slot for the passage of air towards the coil.

Aspire-Flexus-AIO-MTL-Kit-12.jpg


At the front we find a transparent dial in the lower part that allows you to view part of the ASP Chipset in a very captivating way. On the front, as we have seen previously, there are 3 LEDs just above this transparent part. In the center we find the "Mode" key and above it is the Fire key.

Aspire-Flexus-AIO-MTL-Kit-13.jpg


The Fire key is perfectly positioned to be comfortably clicked with the fingers. Around the key is a protruding chrome frame with the circular Fire key inside. The key in the center of the frame bears the Aspire logo. The upper LED light is located between the frame and between the Fire button, the LED emits clearly visible light signals and with different colors depending on the situation. We have previously seen what colors are used to indicate the battery charge level. Also there will be different flash and color signals when a protection function is triggered.

Aspire-Flexus-AIO-MTL-Kit-14.jpg


► Aspire Flexus AIO MTL Kit; Air Flow Control:
As I have illustrated before; in the back of BP Stik there is a slot for the passage of air towards the coil. This buttonhole is just the right size to ensure excellent MTL performance. By twisting the cartridge in one direction or the other, you can easily adjust the AFC until the flow is fully open, or until it is almost completely closed.

Aspire-Flexus-AIO-MTL-Kit-15.jpg


► Aspire Flexus AIO MTL Kit; Flexus AIO Pods 4ml:
The compartment / Pod of Flexus AIO on the bottom has two gold-plated pins for the electrical contact, there is also the automatic puff activation sensor. The metal ring allows the correct insertion of the cartridge, it also allows you to adjust the correct partialization of the air flow by turning the cartridge to the right or to the left. The metal ring offers the right magnetic attraction to the cartridge which is equipped with 3 small circular shaped magnets.

Aspire-Flexus-AIO-MTL-Kit-16.jpg


The black top cap incorporates a very ergonomic fixed-type drip-tip for the lips, its shape is slim and slender with a specific internal diameter for MTL. Flexus AIO Pod features a simple screw top refill system, which not only allows for easy use, but also ensures leak-proof use. Once you unscrew the top cap you will see the black silicone membrane, at first glance it looks like a three filler slot design, in reality only the smaller slot allows you to insert the tip of your refill bottle. The other two large buttonholes are fake, on the sides of them you can see two small vent holes.

Aspire-Flexus-AIO-MTL-Kit-17.jpg


The cartridge is built in PCTG with excellent transparency for optimal control over the internal e-liquid level. On the bottom of the cartridge you can extract or insert the AF Coil you prefer.

Aspire-Flexus-AIO-MTL-Kit-18.jpg


► Aspire Flexus AIO MTL Kit; AF Coils:
There are two different AF Mesh Coils in the Flexus AIO Pod package; the pre-installed 0.6Ω AF Mesh Coil is designed for cloud chasing, while the additional 1.0Ω AF Mesh Coil is suitable for MTL with different e-liquids, even with nic salts. My Vape test took place with Hypnos by TOB, a creamy e-liquid that I know very well and that made me appreciate this new Aspire device.

• AF Mesh Coil 0.6Ω (15W-18W) Kanthal AF - RDL Vape:
Definitely excellent for my way of vaping, this coil with the medium power level selected and with wide open AFC fully satisfies me because it has a strong delivery, full of flavor and is capable of producing dense clouds of vapor. Every now and then to fill my need for hot vapor and Hit I close the AFC finding my weak point very easily.

• AF Mesh Coil 1.0Ω (12W-15W) Kanthal AF - MTL Vaping:
This resistance is suitable for those looking for a fairly narrow type of Puff MTL and with creamy e-liquids it expresses itself quite well in terms of aroma. The AFC adjustment for MTL is perfect up to guaranteeing maximum closure without excessive air flow.

There are no spitting phenomena and the formation of condensation of both coils between the pod and the mod contacts is modest, just dry any e-liquid residues with a cloth at the end of the day.

Aspire-Flexus-AIO-MTL-Kit-19.jpg


► Aspire Flexus AIO MTL Kit; Final conclusions:
Flexus AIO MTL Kit is an extremely easy-to-use refillable pod kit with a sleek compact design and sturdy shock protection. Equipped with a 2,000Ah battery which, together with the 4ml capacity tank, guarantees very good autonomy, ideal for covering a whole day of vaping without having to recharge the battery or the tank. The ASP Chipset with 3 selectable power levels adapts perfectly to the user's needs together with the two available Vape modes; automatic or manual. Thanks to the combined action of the upper LED and the 3 lower LEDs, you won't miss a display to control the device. The excellent AF Mesh Coils is handled beautifully by the AFC with precise and specific adjustment for MTL and RDL.

• Thank you Aspire for sending me Flexus AIO for this Test.

• Thank you for reading.

Aspire-Flexus-AIO-MTL-Kit-20.jpg

From Disposable to Durable: Why Refillable Vapes Are Worth the Switch

The widespread availability of disposable vapes has undoubtedly played a significant role in introducing many individuals to the world of vaping. These user-friendly and readily accessible devices seem like the ideal choice for smokers looking to make a swift transition to vaping. However, refillable vapes, with their diverse range of options encompassing simple pod devices to advanced mods, may appear intimidating, particularly to beginners or those accustomed to the convenience of disposables. In this article, we will delve into the drawbacks of disposable vapes and the numerous advantages offered by refillable vapes. Get ready to discover why making the switch to a refillable vape is a smart move.

1. Environmental Consciousness:
One of the glaring disadvantages of disposables is their impact on the environment. Disposable vapes result in the disposal of numerous components, including batteries, coils, and excessive plastic packaging, whereas refillable pod vapes generate significantly less waste. While it is true that disposable vapes and their components can be recycled in many countries, it is crucial to handle their disposal responsibly. Batteries, in particular, pose risks if not separated and recycled appropriately. To ensure safe recycling, it is essential to follow local guidelines, separate vape components from regular trash, and deposit them in designated recycling facilities.

In contrast, refillable vapes significantly reduce waste as they can be reused, contributing to a greener and more sustainable vaping experience. By choosing refillable vapes, the need for frequent disposal is minimized, reducing the complexity of recycling processes and potential hazards.

2. Cost Comparison:
In the realm of e-cigarettes, the battle between refillable and disposable options has been ongoing. While disposable e-cigarettes offer convenience, a closer examination of the data reveals that refillable e-cigarettes emerge as the clear winner in terms of affordability.

Extensive analysis and consumer reports consistently demonstrate that refillable e-cigarettes offer substantial long-term cost savings when compared to disposable e-cigarettes. The crux of this lies in the fact that refillable e-cigarettes allow users to replace e-liquid and coils, while disposables necessitate the purchase of an entirely new device once the e-liquid is depleted. By investing in refillable e-cigarettes, users can save significant amounts of money over time, making them a more affordable option in the long run.

When it comes to affordability, refillable e-cigarettes leave disposable options in the dust. Armed with concrete data, we unveil the stark contrast in cost between refillable and disposable e-cigarettes. By comparing the prices per milliliter of e-liquid, the true financial advantages of refillable devices become evident. Prepare to be astounded as we present the hard numbers that solidify refillable e-cigarettes as the clear winner in affordability.

Let's start by examining the cost of disposable e-cigarettes. A typical small-sized 1500-puff disposable device, priced at approximately $10, contains around 4-5ml of e-liquid. This translates to a staggering cost of $2-$2.50 per milliliter. Even with the larger 5000-puff disposables, which come in at around $15 and hold 10-13ml of e-liquid, the cost still averages $1.20-$1.50 per milliliter. At first glance, this might seem reasonable, but brace yourself for a more pocket-friendly alternative.

Enter refillable e-cigarettes, the epitome of cost-effectiveness. Bottled e-liquid, commonly available in 30ml, 60ml, or 100ml volumes, becomes the hero of affordability. For instance, a 60ml bottle of high-quality vape juice typically costs around $12. Crunching the numbers, the price per milliliter comes to a mere $0.20. Now, that's a significant difference. But hold on, it gets even better. By scouting the market, you can effortlessly find 100ml bottles of e-juice priced at just $15, slashing the cost to an astonishingly affordable $0.15 per milliliter!

3. Vast Flavor Selection:
Disposable vapes often offer limited flavor options, restricting your vaping experience. Refillable vapes open up a world of possibilities with an extensive range of e-liquid flavors to suit every taste. From fruity blends to decadent desserts and even customizable DIY options, refillable vapes provide a personalized and diverse flavor experience that disposable devices simply cannot match.

4. Tailored Nicotine Strength:

Refillable vapes empower users to customize their nicotine strength according to their preferences. Whether you aim to gradually reduce nicotine intake or require a higher concentration for a satisfying hit, refillable vapes offer the flexibility to cater to individual needs. This level of control over nicotine strength sets refillable vapes apart and enhances the overall vaping experience.

5. Enhanced Performance and Versatility:
Refillable vapes excel in performance and versatility, offering a wider range of options than disposables. With refillable devices, you can adjust settings such as wattage, airflow, and coil resistance to fine-tune your vaping experience. This flexibility ensures better vapor production, improved flavor delivery, and the ability to explore various vaping styles, creating a more satisfying and personalized journey.

6. A Gateway to Advanced Vaping:
While disposables provide simplicity, refillable vapes serve as a gateway to the world of advanced vaping. As you become comfortable with refillable devices, you can gradually explore different types of mods, tanks, and rebuildable atomizers, diving deeper into the art and science of vaping. Refillables offer room for growth and experimentation, allowing you to expand your vaping horizons.

While disposable vapes may offer convenience, the advantages of refillable vapes far outweigh the initial learning curve and maintenance they require. From environmental consciousness and cost efficiency to a vast flavor selection and tailored nicotine strength, refillable vapes provide a superior vaping experience. Embrace the opportunity to personalize your vaping journey, reduce waste, and save money by making the switch to a refillable vape. Step into a world of enhanced performance, versatility, and limitless possibilities as you embark on your refillable vaping adventure.
  • Like
Reactions: DavidOck

Filter