Hello, today let's take a look at the VooPoo Vinci 3 Mod Pod Kit. I will review in this Test each of the features that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► VooPoo Vinci 3 Mod Pod Kits; Before starting, let's see together some special features indicated by the manufacturer:
• Unrestricted vaping from tight to loose:
VINCI 3 adopts Mobius Airflow System, which offers large airflow control from 100-3000Pa. Combined with adjustable power from 5 to 50W, VINCI 3 offers users pure and tight puffs up to strong non-muffled DTL, fulfills the need for immersive clouds with painless transition.

• Two activation modes with instantaneous ignition:
VINCI 3 supports intelligent automatic drawing and also manual drawing via the Fire button. With the most sensitive 1000Pa airflow sensor, the VINCI 3 activates instantly. The dual ignition allows for trouble-free use.



► VooPoo Vinci 3 Mod Pod Kits; Packaging:
The VooPoo Vinci 3 Mod Pod Kit box package that I received has an external sleeve with light blue and blue color combinations, on the front there is a transparent window that allows you to see a large part of the device contained inside, there are also a large number 3 in the background, and the identifying words "VOOPOO" and "VooPoo Vinci 3 Mod Pod Kit". On the back of the outer sleeve are shown; packing list, manufacturer's address, legal notices, trademarks and logos. Sideways you can see; the QR-code, some main features in the form of icons, a stylized image of the device, the scratch & check, a label containing the barcode and the color of your choice which in this case is Aurora Red.





► VooPoo Vinci 3 Mod Pod Kits; Packing List:
• 1* Vinci 3 device
• 1* 4ml refillable Vinci 3 cartridge
• 1* PnP-TW30 0.3Ω coil with 28-36W range
• 1* 0.6Ω PnP-DW60 Coil with 18-23W range
• 1* Usb Type-C cable
• 1* User Manual



► VooPoo Vinci 3 Mod Pod Kits; Specifications and Features:
• Material: Zinc Alloy
• Dimensions: 101.3x30.5x21.6mm
• Weight: 98g
• Battery: Integrated 1,800mAh
• AFC: Mobius Airflow System
• Double manual/automatic activation
• Display: Oled
• Power regulation from 5 to 50W
• Output voltage: 3.2-4.2V
• Charging voltage: 5V/1A
• Resistance range: 0.15-3.0Ω
• Pod Capacity: 4ml (2ml TPD)
• Pod compatible with PnP platform coils
• Time out protection
• Short circuit protection
• Overload protection
• Output overcurrent protection
• Over discharge protection
• Over temperature protection
• Maximum power protection



► VooPoo Vinci 3 Mod Pod Kits; Available colours:
• Carbon Fiber Black
• Carbon Fiber Blue
Aurora Red
Aurora Blue
• Rose Gold



► VooPoo Vinci 3 Mod Pod Kits; First Impressions:
Compared with VINCI 2, the new VINCI 3 according to VooPoo offers a range of 100-3000Pa of airflow regulation due to excellent air tightness. With an adjustable output wattage of 5-50W, users enjoy multiple vaping modes and with different wattage settings. With 5-25W power output, users can have a tight draw with high resistance. With 26-40W power output, users can experience narrow or loose RDL. With an output power of 41-50W, users can easily enjoy the addictive vapor from the depths of their lungs, quickly relieving their nicotine addiction.

One of the strengths of this new Vinci is certainly the favorable relationship between the size of the battery (which for this kind of device is quite large 1800mAh) and the small and robust zinc alloy body. VooPoo claims that the VINCI 3 when fully charged can support 2 days of vaping on a single charge, easily meeting the needs of daily vaping. Furthermore Vinci 3 being more than 50% smaller and 20% lighter than Vinci II. Vinci 3 is more manageable and portable . In fact VINCI 3 is really solid and handy to hold, it also offers a pleasant tactile feedback due to its design made with careful assembly and with soft lines well connected to each other.





The sample I received for this test is "Aurora Red", on the side panels you find a nice shade of bright red with hints of black towards the bottom.
At the top there are two opposing transparent windows that allow you an easy and immediate view of the internal liquid level. Below there is a graduated scale with progressive notches and with the "+" symbol to indicate the direction of rotation of the adjustment toothed wheel to increase the air flow. The Fire key is slightly protruding and can be deactivated for purely automatic use. There are also the words "Gene AI" on one side and "VOOPOO VINCI" on the opposite side.



This regulation system called Mobius Airflow System is exquisitely made, the gear wheel is equipped with end stops and by rotating the wheel itself, you can adjust the lateral airflows present on the sides of Vinci 3 to easily obtain any vape mode from MTL narrowed down to RDL, down to a pretty loose Puff DL. On the sides there are also the Type-C charging port and the 0.69 "display.





For operation, VOOPOO VINCI 3 uses a single multifunction Fire button which via the Gene AI chip communicates with an interactive 0.69" screen. All this greatly simplifies the setting operations and the usage options as follows:

* To adjust the power, press the Fire key three times, when the power flashes, press the fire key to increase it from 5 to 50W with 1W steps at a time. Wait at least 5 seconds and the power is automatically confirmed.

* With the mod on, to enter the menu, press the key five times; to confirm the choice, press and hold the Fire button, the available choices are as follows:
• Button Lock/Unlock: allows you to activate or deactivate the Fire key, the automatic mode always remains active.
• Puff Clear: Clears the Puff counter
• Power Off: It allows you to turn off the Mod, to turn the Mod back on you need to click the Fire button 5 times.



VooPoo Vinci 3 denotes constructive care, in fact on the bottom the base has a rubberized coating, I really like this detail because the grip is greater to keep the device standing even during recharging, moreover the contact with the support surfaces is always silent thanks to the rubber that dampens the noise.

Inside the compartment / pod there are two magnets that offer the right magnetism to hold the cartridge, the 1000Pa airflow sensor channel remains slightly raised compared to the bottom to prevent it from easily filling up with condensation.



The 4ml refillable Vinci 3 cartridge has a nice clarity and classic spout shape with classic duckbill design so comfortable for lips. The spout is removable to access the fill port easily and in one step. Filling is really fast, you don't even need to take the cartridge out of the device.





In the image below you can see the bottom of the cartridge with the two magnets that mirror those inside the compartment/pod. You can easily enter your PnP resistance from below with a light press. In the side-by-side image you can see the top of the cartridge with the spout removed, the filling hole is protected by a dark colored silicone membrane and there is also a small vent hole for the "overflow".



As I anticipated, the Vinci 3 cartridge houses PnP resistors, for this reason you will really have a wide choice for MTL, for RDL and also for DL compatibly with the max power supplied by Vinci 3 Mod which I remind you is 50W.



► VooPoo Vinci 3 Mod Pod Kits; Vaping Test and Final Conclusions:
The concentrated e-juice I chose for this test was the "God Posion" diluted 10% in a 50:50 VG/PG base with 3mg/ml of boost.

• 0.6Ω PnP-DW60 coil with 18-23W range:
The Gene AI intelligent chip with this coil prevents you from selecting a power higher than 23W avoiding possible burns of the cotton caused by carelessness.
The 0.6Ω PnP-DW60 seems like the ideal choice to get a quiet and satisfying restrict RDL vape, or you can get a warm and aggressive MTL vape in the throat hit, flavor-laden, and cloud-rich. With creamy e-liquids this Mesh coil performs really well and with the Fire button the activation is immediate at any degree of opening of the air flow. The new sensor for the automatic draw has been revised by VooPoo and made more sensitive, but it works well and is only responsive by adjusting the airflow in a narrow position suitable for MTL. The "Mobius Airflow System" is able to perfectly calibrate the puff according to the user's needs. I like to use this coil with a power of 20W and with a minimum opening of the air flow I get a sufficiently fluid and spit-free steam delivery. Condensation is quite present in the pod compartment and this could be annoying, but it should not compromise the functioning of the device. I recommend as always (for all pod devices), to dry the bottom of the compartment with a cloth from time to time and not to leave the cartridge full of liquid inserted in the Mod for too long. The Chip Gene AI with a selected power of 20W and with this coil, it manages the charge of the 1,800mAh internal battery very well and if you are not a compulsive vaper, the charge level will be plenty enough for you all day long.

• 0.3Ω PnP-TW30 coil with 28-36W range:
The Gene AI intelligent chip (with this coil) automatically sets the wattage at 35W and prevents you from selecting a wattage higher than 40W, avoiding possible burns of the cotton caused by carelessness. The 0.3Ω PnP-TW30 is a great choice to get a loose vape ranging from RDL to DL depending on how you prefer to adjust the airflow. With the selected power of 36W and the airflow fully open, you get a very loose lung vape, quite flavorful and full of dense clouds of vapor. With this configuration I really like to close the airflow to about 50% because I get more heat and a higher concentration of flavour. The "Mobius Airflow System" when set for a large air passage (over 1,000Pa) prevents the automatic extraction sensor from receiving the right pressure, and will not activate. So for an RDL and DL vape (over 1,000Pa) you will be able to use Vinci 3 only with the use of the Fire button. Also in this case the production of condensation is considerable and you will need to periodically dry the compartment/pod. This is the small price to pay when using high performance coils such as PnP. PnP-DW60 and PnP-TW30 coils according to VooPoo have further improved the standards of durability and flavor production. I agree with VooPoo and I can say that they are really good coils.



I liked the VooPoo Vinci 3 Mod Pod Kit, so I continue to use it for my evening outings, I find that 4ml of capacity is an interesting figure for a small device like this, that uses a 1.800mah battery of great autonomy. I like the easy to read display, and I also like the airflow regulation system that works great in combination with using only the Fire button. When using MTL (below 1,000Pa) and with small portions of flow opening, the automatic extraction is perfectly usable by providing the right pressure to the sensor. The battery requires approximately 90 minutes to recharge. As far as I'm concerned, Vinci 3 is solid and captivating with a nice range of colors, you just have to choose your next super Mod Pod by VooPoo.

• Thanks to VooPoo for sending me Vinci 3 Mod Pod Kit for this review:

• Thank you for reading.

Dear wholesale customers,

The brand new February is here, so Heathcabin team has prepared the new round of brand discount – February Brand Discount for you to save more on different vape-brand products.

Take the chance to join us while offer lasts~

A. Selected Brands 3% OFF​

Promotion Details

• Discount: 3% OFF for selected 10 hot brands
• Date: 6th – 12th Feb, 2023(-0600 GMT)
• Wholesale ONLY
• No coupon code required, total discount amount can be found at your shopping cart.

Promotion Brands

VAPORESSO
UWELL
aspire
YUMI
VANDYVAPE
FreeMaX
WOTOFO
KUMIHO
DOVPO
Steam Crave

B. Buy 1 Get 1 Free​

Another attractive promotion – buy 1 get 1 free is still available for selected products, limited offer, first come first served! Check all selected products here.

With any questions, please feel free to contact your account manager.

Please view the February Brand Discount 2023 here.

The karma x moff cycle disposable vape has a very distinct personality. It looks like a cute bottle with bright colours as the theme colour. The fuselage does not have too much decoration and design, simple and elegant. The names of different flavours are printed on the front for easy identification and selection. If you like the shape of this small personality, then this karma x moff cycle bar disposable vape kit is perfect for you.

As a cheap disposable vape, its pods can be replaced. Its e-juice capacity is 2ml. When your e-juice is exhausted, you can change to a new flavour and try different fun. The nicotine concentration of all e-juices is 20 mg, no matter whether you are a novice or a veteran, you can adapt quickly. Each flavour has been developed through countless experiments to bring you a superior taste.

You may be worried whether the battery will still have the power to power the second e-juice after the e-juice is exhausted. In order to prolong the use time of the device, this device is equipped with a 400mAh battery, which can be used for your whole day, and when the power is exhausted, it supports secondary charging, so that you don't have to worry about power.

The overall body is made of silicone material, which can give you a very smooth feel. The compact body can be easily put into your bag, easy to carry. The design of rechargeable and replaceable pods can effectively prolong the service life of the device, making it serve you longer and more value for money.

More attractive new products are in our cheapest online vape store, you are welcome to choose.

We also want to recommend more boutiques for you:
aroma king 5500 review hot sale
top randm tornado vape 10000 puffs

Let's have a look at the newly launched pod vape kit which is now available at vapes near me —— MOTI X Pod Kit.

MOTI X has the say
A 40W POD MOD system with Preset and Custom modes for personal vaping. Massive cloud ahead, try the MOTI X for the untapped vaping performance!

Compact but Powerful
Important information at a glance, so fun you won't put it down.

Dual Modes
Preset modes aren't satisfying you? Try to custom your desired wattage.

Adaptive Power Control
Mesh coil shows you the smooth vapes until to the end, like dancing on the silk.

Save money or time, you have the final say!
Moti X allows you the greatest freedom of choice.

More Details:
POD Capacity: 4ml / 2ml (TPD)
Wattage: 5~40W
Material: Zinc Alloy / PC
Screen Size: 0.96‑inch (diagonal)
Coils & Suggested Wattage: 0.35Ω Mesh Coil 25~33W (DTL)
Battery Capacity: 2000mAh
Charging Current: DC 5V/2A, Type-C



Recommended products:
naked lava flow
juice head blueberry lemon

Hello, friends, I would like to recommend you the miso plus disposable vape which is a simple and easy-to-operate device. It is powered by a 400mAh built-in battery. The 2ml pre-filled e-liquid does not require you to refill it, and it can be thrown away after use. The maximum number of inhalations can reach 600, which can almost meet your inhalation times of about a week.

The nicotine content of 20mg can make people feel more satisfied than traditional cigarettes. Of course, you can also use it with complete confidence, because miso plus disposable vape uk complies with the TPD standard. The drawing activation method reduces the burden of operation and is more convenient for some novices to operate.

In addition to the lightweight and compact design, it is also very convenient for you to take it out without any auxiliary products, just a simple device to carry it out. In addition, it also brings you 9 flavours full of freshness, including double apple, sour apple razz, cotton candy, menthol, pink lemonade and other flavours, giving you a variety of tastes.

And you are welcome to our vape shops uk online cheap to learn more e-cigs that you may like.

Related vapes here:
randm tornado 7000 bulk buy
5000 puff disposable

I got some busted mods can I use the board chips to build new mods

i am using ss stagger fused clapton, is it safe?

Hello folks and welcome to today's review of the Centaurus M200 Kit featuring the Centaurus Sub Ohm Tank by Lost Vape. This kit was sent to me from Sourcemore and at the end of my review I will give a coupon code if purchased from Sourcemore saving you some money. Let me start off with a brief description of the M200 Mod, it's a dual 18650 battery device that is very lightweight having a aluminum alloy body weighing in at 150 grams without batteries or tank. Maximum power output is 200 watts and it has 2 power modes and uses a adjustment jog dial instead of buttons, the only button is the fire button used for that function only. The M200 utilizes a manual on/off switch. Lets get some information on the Centaurus M200 device and Centaurus Sub Ohm Tank before I give you my findings on this kit, the good, bad and ugly if any.





COLOR CHOICES









IN THE BOX





SPECIFICATIONS





FEATURES


* Power Range: 5-200W

* Quest 2.0 Chip

* Input Current: 1A-40A

* Output Voltage: 0.7V-10V

* Battery Voltage: 3.0V-4.2V

* Battery: Dual 18650 Battery (Not Included)

* Body Material: Aluminum Alloy & Stainless Steels

* Input Voltage: 6.0V-8.4V

* Screen Pixel: 0.96 inch 80*160

* Type C Fast Charging

* Replaceable Side Panels








LIGHTWEIGHT







CHANGEABLE SIDE PANELS

Authentic VWM dope rba 7/10 condition due to wear and tear on the deck everything else is mint condition 



£155 postage included uk only

Great buyer and quick payment. Would do business with again. Thanks @IvanTX313

So i recently quit vaping after 14 years ,which means i have a lot of stuff to move or donate ??

1 what is the fair value of a Reo nowadays ??

2 are there still any places helping veterans and the such with vaping devices ??

Hi,
My Aspire mod wasn't firing and said "no atomizer". I cleaned parts and posts and tried again. No luck. So to trouble shoot I attached the Aspire tank to my Twister mod and it fired. Great. The problem must be the Aspire mod. Nope....I put the Twister tank on the Aspire mod and it fired!! Can anyone tell me what's going on?

Thanks,a
Ken

Welcome to the ECF Club (open 24/7)...

This is the 'un' official ECF gif + meme + whatever + boring??? thread.

After this post it is suggested that you only reply to all posts with a gif figure it out on your own.
Simple!!!



However...... if you feel the need to reply in the textual...... go for it!!!


All ECF rules still apply here...... so nothing questionable or rule breaking.

feel free to "express" ---OR--- "improvise" yourself as you see fit

wanna post your random thoughts, don't be shy, go for it

animal photo's and video's, awesome

positive stories from around the Globe ---> now your talking, post 'em
<<<we all know the Citizens of the World have had enough of Doom and Gloom>>>

music videos... post 'em

it's kinda "the whatever" thread........ we make it what it is

So off we go!!!

Bought/Received :
• 25mm Black Nightmare RDA
• 25mm Black C2MNT 2 RDA

Good seller and ships quickly.

SMT's Creamy Vanilla Custard Cupcakes

FW Vanilla Cupcake 3%
FW Creamy Sponge Cake 1.5%
WF Cream Filling 1.5%
INW Custard 0.65%

Optional additions:

FLV Frosting 0.75%
WF Crumble Topping 0.5%

Suggested steep time = 4 weeks. Cream, custard and bakery flavors dictate the steep time. As always, YMMV.

Not much I can say about Flavor West Vanilla Cupcake or Creamy Sponge Cake. Individually they are two of the best bakery flavors we have in DIY. As Tony the Tiger says "They're G-r-r-reat!"

Magic happens when they are combined in a mix. We get the benefits of what each offers in creating a very solid cake or cupcake profile. I also mixed this as FW VC 1.5% and FW CSC 3% for a different tasting bakery profile. Either way it's tasty. FWIW, basically this is a cupcake base or a cake base. I had to choose one for the recipe name.

For this mix I wanted a rich cream with a light custard note. I did not want to use a custard that was eggy.

INW Custard is the perfect choice for mixes where you don't want a noticeable egg note. It adds all the other pleasing custard notes. If someone wanted a full-on custard flavor (with the egg note) then I would recommend using 0.65% - 1% FA Custard Premium.

WF Cream Filling is much like the cream we've all experienced in a cream filled cupcake. WF CF is not overly sweetened. It sits at about the midpoint (0-10 scale). WF CF also adds a light vanilla note. I love the Wonder Flavours creams. IMHO they are right up there with the best creams around.

INW Custard and WF CF also add moistness and mouthfeel.

I mixed four variations of this. The recipe as written and then one I already noted (FW VC and FW CSC ratios).

For the third I used FLV Frosting. IMO it is the best tasting and most accurate frosting around. FLV Frosting tastes just like a frosting we've all experienced on any cake or frosted cupcake. It's very realistic compared to a decent frosting IRL.

For the fourth I added WF Crumble Topping. It tastes much like a very basic streusel topping. If you don't have it, Get It!!! Yes, it's that good.

I vaped plenty as described above "as is" and each was a very pleasing bakery mix.

However......

As a cake or cupcake base nearly any additional flavors will work very nicely. Naturally, this all depends on percentages used. My recommendation: start low and tweak to taste.

A fruit or two, no problem at all. Adding an individual nut flavor will work fine. Or, going with CAP Nut Muffin at 0.75% would add the nut and an additional bakery note.

Adding a chocolate will either give us a chocolate with a light swirl if used lightly - or - if used higher it will turn the base into a chocolate cupcake or cake.

The addition of an ice cream flavor give you, ummm, cake and ice cream!!!


Please note:

You may have seen that I added links to Bull City Flavors for all the flavors mentioned in this post. I did so because BCF is basically a one-stop-shop for DIY flavors.

BCF has a vast selection of flavors. Most folks on ECF, VU, ELR, ATF and other places purchase flavors from BCF. They are an excellent company and they ship quick.

ECF has an ongoing 6% discount code at BCF. Use code ---> ECF6

They offer free domestic shipping on orders $49.99 and up. Use code ---> FREESHIP

Domestic orders over $74.99 ship free, no code needed.

Subscribe to the BCF newsletter for updates on new products and sales.

BCF routinely offers sales with 10%-20% off with no minimum purchase amount on most US holidays. Those usually run over the course of a few days.

I do not work for nor am I associated with BCF. I am merely trying to help my fellow DIYers.

Want to buy

Drone 250c in great condition
in Black or (Amber/Ultem) Black.

I bought one of these in SS and it has to be the best RTA I have ever used. I just ordered one in black today. Easiest tank to fill. Simply unscrew the top and fill. No chance of leaking at all. Easy to build too. There is nothing better out there in my opinion.

First of all I just want to say hi to all on this forum, good to be here.

As my title states, I am a newbie to vaping, trying to make the switch from cigs. My question is in regards to the nicotine level I am trying to find.

I am currently using a Uwell A2 with the 1.2 pod, I was told that this pod is closer than the 0.9 to a draw of a cig, "mouth to lung", and that is what I am looking for. My issue is I cannot get the right amount of a juice mixture, it is either too much and gives me a buzzed/dizzy feeling, or it is not enough to satisfy me. I am light smoker and have smoked Marlboro Mellows/Silver pack for years, and never have gotten a dizzy feeling from them.

I have been using American Patriot naked 100 tobacco, and I mix the 3mg with the 0mg. I have tried 1/2 to 1/2, 3/4 3mg to 1/4 0mg, 1/4 0mg to 3/4 3mg and everything in between. Like I stated above it is either too much nicotine or not enough, an because of this, I keep going back to my Marlboro's. Just wanting to get some advice on this as I really want to make the switch form cigs to vape.

Any advice would be greatly appreciated.

Joe

Haven’t seen a new post or an email from Dorothy in over a month. Did she move on? Maybe we need to do a scavenger hunt for her.

Using 28g ni80 2mm 9 wraps. 17 watts(4.2v). Great throat hit but not too hard. Nice little cloud for an mtl.

I want to try a parallel 2 strand 32 guage ni 89 build. Shooting for .8 to .9 ohms


What mtl builds are you guys vaping on and have you made any parallel builds work? (28 guage parallel build swere harsh as fak for me. I feel like 32 guage wire should be thin enough. Maybe even 30.

Vaping on stng rda by wotofo and dovpo dual topside squonk(big mod for this rda but oh well.)
Black and gold edition mod and gold stng.
Great rda and only 15 bucks. Simple and basic but nice. Airflow can be set to tight as f or on the loose side.
Recommend for sure. Especially if you are low on money.

Hello everyone, I just joined but wanted to give a thank you to everyone in this sub-forum. I started vaping some because my wife didn’t like me smoking cigars more than about once a month, and I enjoyed the flavor so I was looking for a replacement on off weekends. After reading through a lot of posts here I successfully used Str8vision’s Hot Ethanol and VG method and some cigars I had which I wasn’t super impressed with to create several NET extracts that are excellent even before aging (and I can tell will only get better) . Better than the original cigars in some cases - so it will be fun to experiment and see how it turns out.

I have no idea if any of the people who started and fueled this sub forum are still around here, but if so, thank you very much!

And to everyone else - if you like NETs and cigars and have some unlit but good quality stogies you weren’t a fan of, they might just make excellent NET fluid. Also, to save time and money, take a look at Fumas or “Cuban Sandwich” cigars - the insides have smaller pieces of tobacco, often offcuts of much more expensive cigars, and they chop up really well with minimal effort (since the tobacco is already smaller anyway). The same goes for the high quality small cigars - I don’t mean gas station cheapies, though I’m sure you can give those a try if you want, but high end cigarillos will give you a lot of bang for your buck in my limited (thus far) experience - good tobacco, but as they’re smaller the price is cheaper than otherwise for the amount of tobacco.

Thanks again, and happy vaping!

Bonjour j'ai la smok mag p3 qui me demande un code que j'ai pas crée et j'ai pas trouvé de solution pour la débloqué merci de me répondre

Many young people want to try vaping, but don't know how to choose. For beginners, disposable vape kits are definitely the best choice. Disposable cigarettes with simple structure and rich taste can make novices quickly adapt and fall in love with electronic cigarettes. Simple operation and compact body make it very convenient to use and carry. This toot bar disposable vape kit is a fashionable representative of disposable cigarettes.

The appearance of this disposable vape kit is very simple, small and fresh. The square body lines show an extremely high-end texture, and the particularly harmonious Morandi colour system makes the overall style more retro. The body shell is very flat, without redundant design and protrusions, which provides you with a more comfortable grip. The slim, long shape makes it easy to carry on the go.

You can get 600 puffs from the toot bar disposable vape kit, which is enough for most people to puff all day. The well-developed 2ml e-liquid is very pure, allowing you to enjoy a 2% concentration of MTL smoking. I believe this is very attractive to most novices.

All accessories of this disposable cigarette follow the TPD standard to provide you with quality and safety assurance. The 380mAh battery is able to power your device, giving you an unforgettable taste and a superior feel. With the Draw-activated system, you can inhale whenever and wherever you want, which is very convenient.

If you are still looking for the latest and most fashionable electronic cigarette products, you are welcome to go to our vape shop online uk to choose.

We would also like to recommend the following products for you:
lost vape centaurus m200 uk uk
cheap geekvape aegis l200

Jester 2 Kit is powered by a built-in 1000mAh battery with a side Type-C charging port. It has draw activated system to be easy to operated and LED indicator to show you the battery status. With 3S chip protection, it is safe to use. The independent air inlet also makes you easy to gain RDL to MTL experience by adjusting airflow. It is compatible with Jester 2 0.6Ω/0.8Ω/1.0Ω/1.2Ω Pod Cartridge that has transparent curved design and 3ml capacity. And Jester II 2 Pod can automatically match the recommended wattage for each resistance.

Sourcemore × Vapefly Jester II 2 Kit Giveaway, 3 winners, ends on Feb. 9th, 2023

Enter here

Hey everybody, new here. I have a puzzling one. Makes zero sense to me. Hopefully, y'all can help.

So I went to Michael's and bought Loranns food grade vg. Added .8ml to 4.2ml of aqua drops 6 nic ejuice. Shake, shake, shake....shake, shake, shake. Put it in my Cerberus tank with .17 ohm coil. Fired it on the drag mini (I believe, hand-me-down) at my usual 62W and it seemed to have burned really hot. Airflow almost all the way open. I had to turn it down to 52W, and it still was burning my mouth. Why? Did I instantly burn my coil bc of the vg? I usually mix the aqua with Jimmy the juicemans strawberry astronaut 3 nic max vg. But the only local B&M that still sells it closed, online can take up to 2 wks, and I'm out. Just trying to find an alternative. Thanks in advance.