Bad Drip Salts Pennywise Iced Out eJuice is an icy salt nic eJuice full of cool flavor. Each puff is a cool refreshing fruity stick of bubblegum that’ll never lose its flavor. This bubblegum flavored juice is carefully mixed with fresh juicy strawberries and mouthwatering watermelons. On the inhale, the tang of fresh strawberries makes its presence known. The strawberry taste only gets sweeter as a wave of strawberry flavor floods your taste buds. Then as the wave settles the taste of watermelon flavor mellows you out. The exhale delivers that sugary, juicy bubblegum taste that you know and love followed by a cool menthol blast.


Salt Nicotine e-Juice is formulated specifically for closed vapor devices and pod systems. Salt-Nic juice is NOT recommend for use in sub-ohm tanks, RTAs, RDA’s, and similar devices.

Salt-based nicotine was created to mimic the rush users experience with a combustible cigarettes. Providing users the ability to vape at high nicotine strengths without the extremely harsh “throat hit.” While salt-based nicotine does not absorb into the bloodstream as quickly as combustible cigarettes, its absorption rate is quicker than commonly used e-Liquid made with traditional nicotine.

Read all the warnings and safety precautions in the ‘Warning’ tab found on this product page prior to purchasing and/or using this product.

hello, i have a question about mech mods and i hope you guys can clarify it.

Does every mech mod have 0.1 ohm support or i have to search for one specifically?

im planning on buying the vandy requiem, thanks in advance for the replies!

EDIT: I meant MTL, not DTL. New to the acronyms. I vape (for now) like I smoke cigarettes..

I'd like some advice here if possible. 1st: I'm not 100% certain that I've used the correct acronym's but I believe I have.

I'm looking for a rebuild-able tank (coils) and mod that can do salt NICs. I'm currently using 35mg and I do like a good bit of air. My current vape setups are a JUUL, and a Vaporesso XCROS with the 1.2Ω pods. I do not like the lower ohm pods, they hit too hard. I'd like something more comparable to this that's rebuild-able with simple coils. I dislike disposable items in general, and getting the pods isn't super easy now, and based on what I've read it will probably only get more difficult.

As a point of reference on the airflow, I currently vape the XROS with maximum airflow.

I really don't like carrying giant mods and tanks. I like the form factor of the JUUL and the XROS, so a smaller mod and a 2-2.5ml tank is probably more my style.

I'm looking at the Innokin Ares 2 LE, but I don't know how well this works for DTL and if it provides enough air.

With is much as I was spending on cigarettes, cost isn't a huge issue.

Background:
I've tried vapes several times. My first setup in 2010 was Joye 510 ecigs that I refilled with and had to use the lipton pyramid teabags to hold some johnson creek juice. I gave up on these and went back to smoking. A few years later mod with an aspire nautilus tank (I think) with the replaceable atomizers.

Historically I'd typically vape 18mg (sometimes 24mg) freebase nicotine juices I'd buy at the local vape shop, and some 18mg from Johnson creek. I never could really satisfy the nicotine cravings, and it physically hurt to vape. I coughed more with these setups than I did smoking, my chest hurt, etc.

I'd given up completely on the idea of vaping, but I recently saw a 'documentary (Broken: Big Vape [https://www.imdb.com/title/tt11348920/]), and it actually introduced me to nic salts and convinced me to try them. I bought a JUUL, and for the first time vaping worked for me. No pain, no nicotine withdrawals, and I'm not constantly having to vape.

Apparently I hit all this again at the wrong time (PACT/etc), so if I can stick with this I'd like something I can keep running for a very long time. I think I'll probably carry the vaporesso xros for as long as I can get pods, and use the mod/tank at home and work. I'm also looking at DIY juice, which always interested me anyway...

Hi,guys.If you wanna an innovative Vaporizer Kit,please take a look for Yocan Orbit Vape Pen Kit for best sale.Designed ingeniously, the Orbit is made with exquisite workmanship.

Yocan Orbit Vape Pen has a coil-less quartz cup at the helm, featuring a Top Vertex Airflow System and two Quartz Balls to depict the ultimate aesthetics of vapor while transmitting even heating. Coupled with a 1700mAh battery which can offer 3 voltage levels, the Yocan Orbit is ready to show its madness.

Features

• Coil-less Quartz Cup
• Top Vertex Airflow System
• Two Quartz Balls
• Convert The Kinetic Energy
• 3 Voltage Levels
• 10-second Preheat Function
• 1700mAh Integrated Battery

The bigger the battery, the lower the charging frequency. A long-lasting 1700mAh battery is going to blow your mind on how enduring the Orbit is.You could go to vape online store to buy the cheapest vape device,don't miss them.

Quick Link:Yocan Orbit Vape Pen Kit With Quartz Balls Coil 1700mAh

Hi, today let's take a look at one of Hellvape's latest offerings on the subject of rebuildable atomizers, this is Fat Rabbit Solo RTA Dual Airflow System. In this Test I will examine each characteristic that distinguishes it. I hope by the end of this reading you may have understood this RTA, and decide whether to invest in it or not. As always, my reviews are free and based on my personal experience.

► Before starting let's see the salient features indicated by the manufacturer:
• 25mm diameter adaptable to most of the mod.
• Drip tip 810 with anti-condensation design.
• A quarter turn is enough to unscrew the top cap.
• Large buttonholes for easy filling.
• Boasts a dual airflow system: one set on the bottom and another set on the side.
• Innovative, post-less deck designed for Single-Coil that disengages with a quarter turn.

Enjoy the reading:

► Hellvape Fat Rabbit Solo RTA; Packaging:
The box is proposed in the classic Hellvape orange color, in the front there are; the logo, the image of the tank and the identifying writings of the product (Fat Rabbit Solo RTA).

The features, parameters and contents of the package are all listed on the back side of the box.



On the other sides they are present; The motto of Hellvape (Evolve your vaping genius), an adhesive label with a serial number + color indications of the sample, the scratch & check and the icons of the social networks where the manufacturer promotes its products.



► Hellvape Fat Rabbit Solo RTA; Kit contents:
• 1x Fat Rabbit Solo RTA
• 1x Pre-assembled 0.37Ω NI80 Coil
• 1x Cotton string
• 1x Bubble glass tube
• 1x Bag of accessories
• 1x Tool for cutting the Leg-Coil
• 1x User Manual



► Hellvape Fat Rabbit Solo RTA; Specifications:
• 304 stainless steel construction
• Dimensions: 25,0x55,5mm
• Net weight: 70g
• Type of coil: Single
• Capacity: 4.5 / 5.5mL
• Drip Tip: 810
• AFC: Dual Airflow



► Hellvape Fat Rabbit Solo RTA; Colors:
• SS
• Gunmetal
• Gold
• Matte Full Black,
• Matte Black
• Blue
• Rainbow



► Hellvape Fat Rabbit Solo RTA; First impressions:
This new RTA amazed me at how different it is from most traditional RTAs available to us vapers! I was not impressed so much by the presence of two AFC adjustment rings that have also been proposed on other products, or for the anti-condensation drip tip, or for the postless deck with the wide refill slots ... But what I really like is the ingenious system of quick release of the Deck by means of a 1/4 turn rotation and the effective "anti-pollution" system of liquids.

The rich equipment, the structural solidity, the high performance and the good construction level are those high standards to which Hellvape has by now accustomed me. I admit I'm always pretty excited when I get a new product from this brand.



A very important factor when choosing a new Tank RTA is the size; Fat Rabbit Solo, with a diameter of 25mm is adaptable without protrusions to the majority of Mods, however I find the combination with AREZ 120 MOD 21700 extremely pleasant ... To stay in the great Hellvape family.



Hellvape sent me two different colorways of Fat Rabbit Solo RTA 25mm, both versions come with a bright and sturdy paint job. The Tank Fat Rabbit Solo RTA derives from the previous Fat Rabbit RTA which measured 28.4mm in diameter and was rebuildable in single or dual coil. Our "little guy" has more compact dimensions but still appears quite imposing in height, without however being exaggerated.

The sturdy 304 stainless steel construction of the tank features a comfortable knurling for the top-cap and other machining on the AFC rings below that give a noticeable Grip to the fingers when filling and adjusting the air.



► Hellvape Fat Rabbit Solo RTA; Dual Air-Flow:
Just below the lower base of the glass we find the first of the two AFC (Side air-flow) rings with rotation stops and with a good force of opposition to the adjustment, the ring has four 1.8mm holes (selectable individually). The holes are present on each side (4 + 4 holes therefore 8 total) and channel the air laterally towards the resistance.

On the lower ring (Bottom Air-flow) we find two opposing slots (12x3mm). This ring also has rotation stops and opposes the right contrast force to its adjustment. The two slots convey the air under the Coil.



The Side Airflow + Bottom Airflow combination is technically the best solution for investing the surface of the coil as widely as possible with the air. Furthermore, this double solution offers the user various adjustment combinations.



► Hellvape Fat Rabbit Solo RTA; Exploded view:
The tank can be disassembled in all its parts for in-depth cleaning operations except the AFC control rings, the 810 type drip-tip has no sealing rings, the sealing ring is directly positioned inside the Top-Cap which has a knurled external surface to facilitate its 1/4 turn opening. The huge refill slots are part of a single block with the chimney that has the lower part threaded to be screwed onto the base that houses the glass of the tank.





► Hellvape Fat Rabbit Solo RTA; Purity of eliquid:
To replace the glass, unscrew the central part holding the lower part of the tank firmly in your hands. The lower base where the glass rests is threaded in the center to house the fireplace.

On the side of this base there are two transpiring doors in which the eliquid travels through the channels up to the two slits obtained inside the chamber. In this way the cotton of the Coil is fed by falling "fresh" liquid. The liquid present in the tank is in fact in a certain sense separated from the heating element (Coil) therefore vaporization uses only the liquid coming from the conveyance process, not polluting the part of liquid that is contained in the tank above the build and not around it.



► Hellvape Fat Rabbit Solo RTA; Quick Deck Extraction:
The internal conformation of the bell in addition to the aforementioned channels for the liquid also shows the lateral ventilation holes (Side airflow) and reduces harmful spaces to the advantage of a better concentration of vapor / flavor.

Another thing I really liked and that seems to work great is the quick Deck removal. In fact, the deck is engaged in the central part by means of a bayonet joint and its removal takes place with a 1/4 turn anticlockwise and then simply proceed with extraction by simply pulling the deck down and the central part up.

The tightness to liquid leaks is guaranteed by a precise machining with tight tolerances and by the presence on the Deck of a large lateral o'ring.



► Hellvape Fat Rabbit Solo RTA; Coil regeneration:
To insert the coil on the postless deck, first unscrew the screws on the side of the deck. In the image below you can also see the bottom of the Tank with the adjustable 510 pin and the two bags that contain the ends of the cotton.



Using the toolkit supplied, it is possible to choose the cut size of the coil legs and then insert the resistance on the postless deck. For the regeneration I installed the pre-assembled 0.37Ω NI80 coil present in the kit using the cotton string provided by Hellvape.



► Hellvape Fat Rabbit Solo RTA; Final conclusions and vape test:
Regeneration on the Hellvape Fat Rabbit Solo RTA is really simple and intuitive, the only thing to pay attention to is the right amount of cotton, in fact too much cotton is lost in quality of flavor and stifles performance. With little cotton you risk flooding the surrounding environment. However, with a minimum of experience it is not difficult to reach the best compromise on the quantity and optimal positioning of the cotton inside the buttonholes.

I really liked the dual airflow system finding it quiet and ultra adjustable. With 35W the production of steam was abundant and the responsiveness to the Fire key discreet. I like to reproduce a rather narrow Puff RDL using small apertures of both AFCs. I usually use both AFCs in order not to give up a complete investment of air on the surface of the coil, I could only use one of the two AFCs keeping the other closed, but in doing so I seem to lose something in terms of flavor. So I prefer to take advantage of the Bottom airflow + Side airflow combination which in my opinion is already an advantage over the competitor's tanks that only use a Top, Bottom or Side solution.

Surely this Fat Rabbit Solo RTA with its excellent flavor rendering is the best single coil rebuildable tank I have ever tested, I tried to give myself an explanation and I think it is partly due to the already described combination of the two AFCs, but I believe that in this, the two breathable ports on the bottom of the tank have a certain importance, which keep the unused liquid separate from the underlying build, thus avoiding the pollution of the liquid reserve with non-vaporized residues. I had already seen a similar realization on an old tank whose name I don't remember and it seemed really effective.

► Pro:
• Very good quality of materials
• Attractive design
• Excellent steam production
• Intense flavor production
• Double silent air flow
• Liquid reserve in the tank always clean
• Quick and easy to regenerate
• Convenient price

► Tips:
• No problem, everything works as described.

Thanks to Hellvape for sending me the sample for review.
Fat Rabbit Solo RTA-Hellvape - The DIY atomizer leading brand

Thanks for reading.

Hello
I have been vaping a little over a year now and came across this forum, I have just been given the aspire zellos 3 as a gift but tbh I have no idea what to do with it I have a smoke vape v2 and I really like the flavour and smoke I get from this, I don't seem to be able to get my zellos 3 to do the same. I use 88vape 50/50 oil, I get a lovely taste in my v2 pen and seem to be using this more than the zellos, can anyone advise me on this? It has so many settings any help would be greatly appreciated
Many thanks, Kells

Looking for one of the above, tried out the origin mini but cannot for the life of me get into DTL.
Looking for an aegis one in rainbow color

So I've had the aegis legend 2 for about 5 months now and I happened to have it in my back pocket as I was getting into my work truck and I ended up sitting on the tank and it broke the 2 front screw holes that hold the 510 connector down now there's nothing for the screws to hold it in place so now it doesn't have a connection unless I press down on it... does anyone know where to order a replacement piece or any other solution .. thank you!!!

If anyone has one they are willing to sell please let me know.

I almost bought one back in the day but decided not to, and then I quit vaping for awhile and unfortunately they are now out of business

I switched from smoking to vaping in 2014 and during my learning process I visited here many times. After a bit I got pretty well settled in and did not visit vaping sites often at all, or really keep up on ... things.

So, now I'm poking around online again to keep better informed and see what folks are using, enjoying, or having problems with. And to keep up better with the state of things. This has brought me to visit here often again, so I figured I should finally sign up.

My first vape was a cigalike, and after one of those I realized it was not going to do the trick. Picked up a Rejuve kit, then moved on to egos and Vivi Novas, Nautilus kit, and so on up to the Aegis Legend mods and various tanks that I use now. I never got into building as the mods and tanks were evolving so quickly that it seemed so much simpler to go that way at the time.

Thank you for having me here, and sending out best wishes to all of you!
Ron

https://ifunny.co/video/iittle-s-pretending-to-die-bocause-i-took-her-vape-ZG2HNlkH9

Different type of Bible study.

Login to view embedded media

Hi, guys!

I wonder what is the real wattage/power of Pico mod delivered to the coil.
And how much wats is the variation?
(With 0.7ohm and 13w on screen, for instance)

Best regards!

Would love the Valyrian 3 kit , but man, that's a lil spendy for a mod, even though I hear the tank is also top notch, Sakerz level flavor.

Other than the V3, I'm open to suggestions.. at MOST , I'd say I vape 100-120 watts , the biggest tank I have I vape 80 watts , RDA is the Drop and usually hit that around 90 watts ..

It's a box mod , so preferably dual battery 18650 , just if anything , for run time as a single battery mod on 90+ watts will die pretty quick..

Planning to grab a Sakerz tank , and possibly a profile PS RDA

Updated 2022 New Coupons on Vapesourcing

Coupon Code: NOVO4
Coupon Price: $19.99
Discount: 25.94% off
Link: SMOK Novo 4 Pod System Kit

Coupon Code: LVTQK
Coupon Price: $41.99
Discount: 31.15% off
Link: Lost Vape Thelema Quest 200W Starter Kit

Coupon Code: HLMT
Coupon Price: $21.49
Discount: 20.38% off
Link: Hellvape Launcher Mini Tank 4ml/5ml

Coupon Code: UCAK2
Coupon Price: $16.99
Discount: 37.05% off
Link: Uwell Caliburn AK2 Pod System Kit New Colors

Up for grabs is yet another of my VA Spade 21700 mech squonks. This one has a real carbon fiber door and is in good used condition. This one shows finish wear around the 510 and where the door sits in the mod. There is also a small ding on the top of the mod near the 510. The pics should tell the story. What you see is what you get.

$120 shipped in the US. Payment via PP F&F or buyer assumes fees. Ships same or next day depending on when payment is received.

My hemoglobin and hematocrit have jumped into the stratosphere. Hb was 16.7 and crit 55!!! I’m 61 y/o and have never seen my Hb above 15 or crit above 45-50.
Can we spell car-bon mo-nox-ide!
I think vaping will be going by the wayside like all the other pleasurable vices I’ve had to forgo….but, my health is more important for sure!

I'm sure it's a long shot, but I'm finally getting low on Boba's. I know there are some hoarders out there. Would take several hundred ml if possible. The higher the nic content the better, but I'll take what I can get. Thanks.
CH

Voopoo Drag Nano 2 Kit is such a tiny and stylish kit that can use as an accessory wearing around your neck, which can match your different look and meet your imaginable sense of both beauty and use. Drag Nano 2 offers the 2ml vape juice capacity and has multiply pod options that are available for the top filling system, providing a discreet session on the go. To be accessible and removable, the VINCI pod cartridge is half-stealth and connect by magnetic suction. Having the feat of aftertaste and vapor is the ultimate goal of its innovative and creative iteration, it has the core element of 0.8ohm and 1.2ohm, enlivening your tastebuds, to some extent, and supporting indulgence frequently and enduringly for the DTL vaping experience. No need to do anything but inhale, the draw-activated ignition decreases any trouble and shortens the time of impatiently waiting. Aside from that, it supports side adjustable airflow and enhances leak-proof technology, after pumping, airflow will back to the sandwich on both sides, which effectively stem the e-liquid. After the e-liquid flows to the interlayer, the suction flow can bring the e-liquid back to the heating element.


Drag Nano 2 improves its battery capacity and performance, it is powered by 800mAh integrated battery and has a 20W maximum output, resulting in a wide range of different concentrate types and stable power sufficiently. Setting three LED lights can show you the battery life and help you check your power in time (one light <33%, two lights 33-66%, three lights 66-100%). What’s more, it reminds of you the output level (White High, Green Mid, Blue Low). Rather than cheating on workmanship and materials, it has the most systematic and comprehensive development and defines its beauty by the diamond grid pattern, striking logo, and plenty of colors.

Features

• Use As A Accessory Wearing Around Your Neck
• 2ml Vape Juice Capacity
• Top Filling System
• Fit For VINCI Pod Cartridge
• 0.8ohm And 1.2ohm Mesh Coil
• DTL Vaping Experience
• Draw-activated Ignition
• Leak-proof Technology
• 800mAh Integrated Battery And 20W Output
• Three LED Light

SPECIFICATION

• Size: 71.5* 44* 14.2mm
• Battery: built-in 800mah battery
• Power: max 20W
• Output voltage: 3.2-4.2V
• Charing: 5V/1A
• Capacity: 2ml
• Resistance: 0.8ohm/1.2ohm

Geekvape Wenax SC Kit looks like a diamond that shines under the sun, noticeable and eye-catching. It inherits its pursuit of delicacy and performance, which is innovative about its structure to prevent condensation that adopts the small liquid droplets mouthpiece. Wenax SC is available with two kinds of drip tips (sold separately), which are aimed at the MTL vaping experience and have more options according to own preference. To customize your taste and achieve a more unprecedented vapor, the pod cartridge can work along with G Series Coil. If you are passionate about the thickness cloud, you can choose the 0.6ohm coil. Paying attention to waiting for seconds to make sure your e-liquid is absolutely soaked in your coil, which can bring a more delicious flavor and have a longer lifespan. Catering to 2ml vape juice, Wenax SC supports 2 days use due to its cooperation with both vape juice capacity and battery. Additionally, it utilizes the 3-level leakage-proof technology to lock the e-liquid firmly and prevent messy vaping, avoiding the annoyance of a messy vape. Wenax SC has been widely acclaimed in that it is powered by a 1100mAh internal battery that winds up your anxiety for lasting power. Coupled with a new charge with a Type-C cable, it will keep your device in good condition by its stable charging. With its auto-activated ignition, you must admire the perception of freedom of using.

Features

• Looks Like a Diamond
• Noticeable And Eye-catching
• Small Liquid Droplets
• Two Kinds Of Drip Tips (Sold Separately)
• MTL Vaping Experience
• Along With G Series Coil
• 3-level Leakage Proof Technology
• 2 Days Use
• 2ml Vape Juice
• 1100mAh Internal Battery
• Auto-activated Ignition

Specification:

• Size: 18.85* 112mm
• Battery: built-in 1100 battery
• Output: Auto activation-0.6ohm(14/15/16W), 1.2ohm(9/10/11W)
• Firing button-0.6ohm(16W), 1.2ohm(11W)
• Charging: Type-C, 5V/1A
• Resistance range: 0.5-3ohm
• Working temperature: -10-45℃
• Longest vaping time: 10s
• PCBA temperature alarm: 80℃
• Low voltage warning: 3.2V±0.1V
• Standby current: <15uA
• Capacity: 2ml
• Resistance: 0.6ohm(13-18W) , 1.2ohm(10-12W)

Geekvape B100 Kit promotes itself to release the delicacy by inheriting the concept and classic appearance, and then increase further advance for it. It is powered by a single 18650/21700 battery (not included) that features a max 100W output. The large battery capacity ensures you the more you have, the less frequently you’ll need to charge, which is always handy during a busy schedule. Whether you prefer the mild or the strong, you can refill your e-liquid to the removable tank by the side filling system. It is capable of a 6ml vape juice capacity, depending on different nicotine levels of vape juice, it releases a positive impact on the dopamine system which increases a sense of reward and brings you a sense of satisfaction. Couple with the P series coils, this core element usually produces some excellent results if managed well. Boasting its IP67 water & dust resistance, Geekvape B100 must have the confidence for a clean and user-friendly experience. It is responsible for bringing an upgraded and innovative creation for performance, this 0.96 inch TFT color screen allows you to control your data that depends on your current demand and the situation of your session.

Features:

• Powered By Single 18650/21700 Battery (Not Included)
• Max 100W Output
• Capable Of A 6ml Vape Juice
• Couple With The P Series Coils
• IP67 Water & Dust Resistance
• 0.96 Inch TFT Color Screen

SPECIFICATION:

• Size: 49.17* 33.00* 121.90mm
• Material: Plastic + Silicone + Leather + Zine alloy
• Battery: single 21700 battery(not included)
• Output: 5-100W
• Output Voltage: 0.8-8.5V(Max 8.5V)
• Input Voltage: 3.2-4.25V
• Minimum Voltage: 3.3V±0.1V
• Screen: 0.96 Inch TFT Color Display
• Resistance Range: 0.1ohm-3.0ohm
• Longest Output/Vaping Time: 10s
• Temperature Control: 200℉-600℉
• Charger: Type-C, 5V/2A
• Capacity: 6ml
• Resistance: 0.2ohm(60-70W)
• 0.4ohm(50-60W)

Geekvape Aegis One Kit not only looks appealing but also enhances comfortability by its flat pen size body and textured leather. With its extraordinary ‘S-shaped’ design airway, it provides a fun and flavorful experience for both smooth and stronger throat-hit. Emphasize the Aegis first vape pen, it plays the role of a pioneering example and reaches beyond the standard look from its durability. It polishes itself by its skin-like touch and a streamlined profile, the zinc alloy was so strong that it has more resistant to shock and scratches. One FC Kit is powered by 550mAh built-in battery, and One Kit houses a 780mAh integrated battery, both of them operate within ONE tiny button and allow you to expect several vape sessions by its three output levels, the LEDs will indicate the status of the battery and output level. One Kit receives a 2ml vape juice capacity and supplies your e-juice via the top filling system, designed for MTL vaping, then navigate your journey of vaping experience at once.


Features:

• S-shaped’ Design Airway
  
  
• Skin-like Touch And Streamline Profile
  
  
• 780mAh Integrated Battery For One Kit
  
  
• 550mAh Built-in Battery Bor 1FC Kit
  
  
• ONE Tiny Button
  
  
• Three Output Levels
  
  
• 15 Minutes Fully Charge For 1FC
  
  
• 2ml Vape Juice Capacity And Top Filling System
  
  
• Designed For MTL Vaping
  

SPECIFICATION:

• Geekvape Aegis 1FC Kit
  
  
• Output Voltage: 3.7V max
  
  
• Output Current: 5A max
  
  
• Battery Capacity: 550mAh
  
  
• Display Method: 3 LEDs
  
  
• Atomizer Resistance: 0.8ohm±0.1ohm/1.2ohm±0.1ohm
  
  
• Charging Port: Type-C DC 5V/2A
  
  
• Vaping: Draw activation/firing button
  
  
• E-juice Capacity: 2ml
  
  
• Filling Type: Top filling
  
  
• GeekVape Aegis One Kit
  
  
• Battery: 780mAh
  
  
• Charging: Type-C DC 5V/2A
  
  
• E-juice Capacity: 2ml
  
  
• Filling Type: Top filling
  
  
• Output Mode: Constant voltage output
  
  
• Output Voltage: 3.7V max
  
  
• Output Current: 5A max
  
  
• Display Method: 1 LED
  
  
• Atomizer Resistance: 0.8ohm±0.1ohm/1.2ohm±0.1ohm
  
  
• Vaping: Draw activation/firing button
  

Vaporesso TARGET 100 mod Kit features the monumental iTank Sub Ohm Tank, inspired by the Spacecraft, this tank is decorated with an all-metal wrapped design, there’s no denying that its compact and mechanical tank has a more strong structure to protect itself. It has an 8ml capacity that is 67% larger compared to similar sized tanks, and redefines the new DTL experience, as you hold the vapor in your mouth, rather than sending it directly to your lung, you can have more time to taste and absorb the flavor. its Turbo Airflow system combines airflow from three air inlets at the bottom and then gives you the most flavorful taste, when the air is added, you can enjoy infinite airflow with lower noise. The GTi coil can create a larger surface area to enhance the quality of flavor and cloud delivery. Depending on its self-circulating system, it efficiently prevents leakage when you consume your e-liquid. Alternatively, the special F(t) mode in the AXON CHIP gives you a premium heating rate to control and matches the suitable flavor at different temperatures. This series inherits the unique cage-like TARGET 80 frame, TARGET 100 is powered by a single 21700/18650 battery (not included), with its large case, it is 16% smaller and lighter, which can be carry for any occasion. Crafted for its braided water-resistant fabrics, you will hold it more comfortable and textured.


Features

• Monumental iTank Sub Ohm Tank
  
  
• Decorated With all-metal Wrapped Design
  
  
• 67% Larger Compared To Similar Sized Tanks
  
  
• For DTL Experience
  
  
• Self-circulating System
  
  
• Special F(t) Mode In The AXON CHIP
  
  
• Match The Suitable Flavor At Different Temperatures
  
  
• Inherite The Unique Cage-like TARGET 80 Frame
  
  
• 220W External Dual 18650 Battery For TARGET 200
  
  
• Single 21700/18650 Battery (Not Included) For TARGET 100
  
  
• Braided Water-resistant Fabrics
  

Vaporesso TARGET 100 & 200 Kit SPECIFICATION

• Target 100
  
  
• Dimensions: 140.3*28.6*35.1mm
  
  
• Tank capacity: 5ml/2ml(TPD)
  
  
• Coil resistance: GTI 0.2ohm Mesh Coil (60-75W), GTI 0.4ohm Mesh Coil (50-60W)
  
  
• Battery capacity: 1* 21700/18650 battery (not included)
  
  
• Output power: 5-100W
  
  
• Charging current: DC 5V/2A, Type-C
  
  
• Display: 0.96” TFT Screen
  

anyone able to help me

I changed coil in my Innokin coolfire z80 (coil from same pack as the old one)
never had any problems before, but this time it’s become hard to vape on it and it’s even with airflow fully opened.
Tried a new coil again with same result
Refresh function works a bit, but only for a short time.
Any ideas to what it could be??

Thanks in advance for any replies