What coils can i use in tfv9 tank? (i have smok scar-18)

Anyone used the Sunbox Game Over 360 and/or E7.5?

Thoughts? Are they worth it?

Hi,

Has anyone here tried the Nucleo chipset by Omegavaper?

I'm looking at getting a Sunbox squonk that is available with both Nucleo and DNA60, and I was curious how they compare to each other, especially in TC performance. Efficiency and battery life as well.

Recently bought an SqEvo with the DNA60, so another one would be nice in that I could just copy profiles etc across, but the Nucleo board looks really interesting.

If I should post this elsewhere let me know, I just thought this was the best place as I'm partially asking about TC. There's no chipset subforum

Thanks.

Hi everyone, I'm about to buy an epipe from creavap. I was wondering if you could give me some advice on which one to choose from the normal 60w and the one with the DNA chipset. What's the difference and your recommendation? Thank you

SMOK ACRO is equipped with a long-lasting rechargeable 1000mAh battery, it offers both auto-draw and button-activated draw functions, so you can vape according to your preference. Use the power button to adjust the wattage, anywhere between 5 and 25W to obtain a mellow taste and massive vapor. ACRO kit also has an intelligent detection function to help better understand the status of the device.

Smok acro pod cartridge comes with two Meshed pods, both made of PCTG plastic, which can hold up to 2mL of your favorite e-liquid, whether it is freebase or nicotine salt. ACRO pods use a simple side filling method, making filling a breeze. The mouthpiece is flat, with transparent juice windows on both sides to monitor the internal liquid level. Built-in 0.8ohm meshed coil for excellent flavor. For maintenance, airflow adjustment is provided-this is a special slider on the back of the device. The adjustable airflow inlet allows you to adjust intake volume and immerse in every inhalation.

Specifications:

• Size: 30.2* 11.2* 103mm
• Weight: 48g
• Output Wattage: 5W-25W
• Battery Capacity: 1000mAh (Built-in)
• E-Juice Capacity : 2ml
• Standby Current: < 50uA
• Input Voltage: 3.3V-4.2V
• Output Voltage: 1.5V-4.0V
• Resistance Range: 0.6Ω-2.5Ω
• Charging Voltage: 5V±0.2V
• Charging Current: 0.85A (Max)
• Overcharge Voltage: 4.3V±0.05V
• Overdischarge Voltage: 2.4V±0.05V
• Overcharge Current: 1.75A±0.6A

Package Content:

• 1 x ACRO Device (1000mAh)
• 2 x ACRO Meshed 0.8Ω Pods (2ml)
• 1 x Type-C Cable
• 1 x User Manual
  

Suorin Air Pro keeps the Suorin signature slimline look, the main body becomes smooth and rounded, while still housing an impressive 930mAh battery. It also comes with refillable pods that offer excellent vape experiences. Suorin Air Pro kit is made of durable zinc alloy and has a classic slim card-like chassis with a single button and LED indicator. While ensuring extremely high portability, it also increases durability. The built-in large-capacity battery will last all day and can be charged quickly via USB charging or pogo charging. The LED light on the chassis informs you of your battery's life. This all-in-one pod system is an improvement on its predecessor in a multitude of ways; The maximum output power is 18W, using draw-activated firing or button firing. The refillable Suorin Air Pro pod cartridge can hold 4.9mL of liquid, built-in 1.0ohm coil is most suitable for nicotine salt e-liquid, and the innovative LAVAL nozzle airway design is used inside, which can speed up the inhalation of airflow and achieve excellent flavor delivery. The top of the pod possesses a hidden mouthpiece to provide you with a smooth MTL vape while maintaining stealth. The pod cartridge uses a small plug to prevent leaks and make it easy to refill. Magnets keep the cartridge in place. A variety of fashionable color options. All ensuring that vapers will be able to experience intense satisfaction like never before.

Parameters:

• Cartridge Capacity: 4.9ml
• Resistance: 1.0Ω
• Output Power: 18W
• Battery Capacity: 930mAh
• Charging current: 1000mA
• Material: Zinc Alloy+ PCTG
• USB charging, Pogo Charging
• Open Circuit Protection
• 5s Vaping Protection
• Short Circuit Protection
• Low voltage protection
• Overcharge protection

Package Content:

• 1 x Suorin Air Pro Device
• 1 x Suorin Air Pro Pod
• 1 x USB Cable
• 1 x User Manual
  

Yocan UNI Twist is one vape mod to fit all oil cartridges. A premium wax and oil vaporizer battery that is sleek, durable, and portable. Well the Yocan UNI Twist is perfect for you! This device offers multiple, customized temperature settings as well as the perfect size to take with you all day. It takes all the best things about the UNI and enhances them. Yocan UNI Twist is also the first Box Mod that is suitable for various oil atomizers of different diameters. You can change the connector size by rotating the diameter adjustment dial above the mod. Compatible with atomizers that have a diameter of 6mm-12mm. It is made of zinc alloy shell, delicate and non-scratch, the size is between UNI and UNI S, durable and portable. Powered by a built-in 650mAh battery, with a Type-C charging port on the side, allowing you to keep the UNI Twist upright by charging. The bottom of the device is also equipped with a twist dial for voltage adjustment. You can customize the e-cigarette experience from 1.8V to 4.2V. Just turn the dial to the desired voltage. Yocan UNI Twist supports preheat function: preheat function runs for 10 seconds. Activated by clicking the power button 2 times. There are a level window, hanging hole, and height adjustment button on the panel between the two twist dials. Specially designed with hanging holes, you can use it with a lanyard or keychain to quickly access the equipment you need. The height adjustment button is a patented design of Yocan UNI Twist. It is universally adjustable in width and height and can be used with various oil atomizers.

Specification:

• Patented box mod for all kinds of oil atomizers.
• 650mah battery capacity
• Built with height slider matching all styles of oil atomizers.
• Adjustable diameter dial fitting different diameters
• 10SEC preheat function(1.8V)
• Twist variable voltage:1.8V-4.2V
• Built with hanging hole
• Type-C Charging
• Compact and discreet

Package Content:

• 1 x Uni Twist box Mod
• 1 x Magnetic Adapter
• 1 x Type-C Cable
• 1 x Instruction Manual
  

SMOK ARCFOX Kit is as precisely crafted as ever, its solid body is clad in scratch-resistance and non-slip silicone, coupled with delicate metal and leather shell to protect the fuselage, making the whole more elegant and superior. And its performance and efficiency are still of utmost priority, keeping pace with advanced technology. Powered by two external 18650 batteries, ARCFOX Kit can convert its inner energy to a versatile power range of 5W to 230W. Equipped with a 0.96-inch TFT Screen, it makes ARCFOX Kit has better designed, it is convenient for one-handed operation. It's a tri-proof function: IP67 Waterproof can withstand water immersion between 15cm and 1 meter for 30 minutes; IP67 Dustproof helps prevent damage to the device due to accumulation or exposure of dust; Shockproof, no need to worry about an accidental drop or unintentional collision. In addition, Featuring VW mode(5-230W) and TC mod(10-80W), ARCFOX Kit allows you to adjust the current resistance, wattage and voltage to achieve accurate control over power and temperature. The powerful performance of the chipset ensures each puff is safe and reliable, delivering a pleasant vaping experience like never before. While the mighty TFV18 tank with two TFV18 meshed coils brings out a more immersive vaping to let you indulge in the rich vapor and mellow flavor.


SPECIFICATION:

SMOK ARCFOX Mod

• Size:88.25*55.6*30mm
• Weight:145g
• Output Wattage:5W-230W
• Batteryual 18650 batteries(not included)
• Standby Current:< 150uA
• Input Voltage:6.4V-8.4V
• Output Voltage:0.5V-8.2V
• Charging Voltage:5V±0.2V
• Charging Current:2.0V (Max)
• Resistance Range:0.10ohm-2.50ohm(VW)/0.05ohm-2.0ohm(TC)
• Temperature Range:200°F-600°F /100°C-315°C
• Screen:0.96-inch TFT Screen
• Charging Port:Type-C Port

SMOK TFV18 Tank

• Size:31.6*66.3mm
• Weight:93.3g
• Filling Type:Top Filling
• Material:Stainless Steel
• Capacity:7.5ml
• Thread:510

PACKAGE CONTENT:

• 1 x ARCFOX Mod
• 1 x TFV18 Tank (7.5ml)
• 1 x TFV18 Meshed 0.33ohm Coil (Preinstalled)
• 1 x TFV18 Dual Meshed 0.15ohm Coil
• 1 x Bulb Glass Tube Replacement
• 1 x Type-C Cable
• 1 x Bulb Glass Tube Replacement
  

SMOK MORPH POD-40 Kit with an emphasis on ergonomics, it feels comfortable in your hand, easy to carry, and easy to use. The arch design of the fuselage enhances the overall aesthetics and provides a better grip. Comes with a large side fire key for easy and comfortable pressing. The invisible key design maintains a perfect balance between minimalism and aesthetics. More than showing the overall modeling, this device also lets you know that the amazing is in the detail. Touch the leather shell, and you will be amazed by its crafted, exquisitely textured surface. MORPH POD-40 is packed with a 2000mAh battery and an enhanced chipset for excellent performance and versatile operation. In the power range of 5W-40W, you can press the UP/DOWN button to adjust the required power and get the preferred effect. This device lasts a long time on a single charge, giving you a long-lasting vaping experience. The 3.7ml pod comes with an adjustable airflow inlet on the top of the device that supports both MTL and DTL hits by adjusting the airflow valve, allowing you to immerse yourself in every inhalation. Its mouthpiece is ergonomically designed with a narrow bore, which is ideal for the enhanced throat hit, and you'll be fully content with the sensation of each inhalation. Equipped with two RPM coils and is compatible with the RPM coil series to maximize coil adaptability.


Specification:

• Size:37.2*28.35*108.35mm
  
  
• Weight:119.5g
  
  
• Output Power:5W-40W
  
  
• Battery: Built-in 2000mAh battery
  
  
• Standby Current:<120uA
  
  
• Input Voltage:3.3V-4.2V
  
  
• Output Voltage:0.5V-8.2V
  
  
• Charging Voltage:5V±0.2V
  
  
• Charging Current:1.4A (Max)
  
  
• Resistance Range:0.30-2.50ohm
  

Package Content:

• 1 x SMOK MORPH POD-40 Device (2000mAh)
  
  
• 1 X MORPH POD-40 Empty RPM Pod (3.7ml)
  
  
• 1 x RPM Mesh 0.40 Coil
  
  
• 1 x RPM Triple Coil 0.60
  
  
• 1 x Type-C Cable
  
  
• 1 x User Manual
  

Just throwing a feeler post out there before I start throwing stuff away. I have a practically new UD Bellus in the original packaging. I tried using it twice with disastrous results. A lot of folks loved this tank back in 2014-2015, and more people hated it with a passion (I'm in this group). I would suggest some familiarity with this tank just to avoid frustration.

If you want it I can either ship in a small flat rate box for $10 or put in a bubble envelope for $7. Funds to be forwarded to my PayPal F&F with no mention of vape products. I'll forward tracking immediately after I ship it.

CONUS only.

I have the Caliburn A2 and have been Leaving it laid down with juice for about 2 days straight.


And now the Autodraw does not work.

Any chance on a Fix.

I can still fire it with the button but prefer auto draw.

Hello everyone, it's good to be back to vaping

Dear Wholesale Customers,

Here comes our new round of brand discount – March brand discount round 2 for you to save more on different vape-brand products.

Take the chance to join us while offer lasts~

Promotion Details

• Discount: 3% OFF for selected 10 hot brands
• Date: 14th – 21st Mar, 2022(-0600 GMT)
• Wholesale ONLY
• No coupon code required, total discount amount can be found at your shopping cart.

Promotion Brands

• VOOPOO
• UWELL
• INNOKIN
• VANDYVAPE
• DOVPO
• WOTOFO
• Horizon
• Eleaf
• HELLVAPE
• Suorin

With any questions, please feel free to contact your account manager.

Please view the March Brand Discount – Round 2 here.

Authentic Oumier Wasp Nano RDA V2 Vape Atomizer continues the transparent top cover design of Wasp Nano, and the dripper part can bring you a more comfortable touch.

The new double-sided four-slot airflow system provides a powerful air intake system and airflow experience. The 24mm RDA supports single and dual coil building.
Comes with BF / Bottom Feeder / Squonk Pin.

Welcome to vape store near me to buy.

You may also like:

Geekvape Max100
Smok thiner

So the previous 3 generations of VECEE disposables have the same profile design. An impressively shiny metal body is fully loaded with incredible flavor inside.

Do you like its design?



VECEE Disposables: VECEE Disposable Vapes

A super huge thanks, and shout out to not only @Deb50, but out to Maggie @SteamCrave for providing this pair for the purposes of this review. I had briefly thought of reviewing them separately, but they paired up SOO well together, it just HAD to be done. So, YOU the readers, get the MEGA review, all for the low, low, low price, of ....... well, ..........NOTHING !!!!


Starting this mega review off with the SteamCrave Hadron Mini DNA100C 100W powerplant



**Steam Crave HADRON MINI DNA100C 100W Box Mod Features:**

• Evolv DNA100C Chipset
• Dimensions - 96mm by 39.7mm by 26mm
• Single High-Amp 2X700 Battery - Not Included
• Optional 18650 Battery - Battery Sleeve
• Wattage Output Range: 1-100W
• Voltage Output Range: 0.2-9.0V
• Resistance Range:
• Temperature Range: 200°-600°F
• Replay
• Watts Boost
• TC Mode
• Zinc-Aluminum Alloy Chassis Construction
• Intuitive Firing Button
• 0.9" TFT Color Screen
• Two Adjustment Buttons
• Atomizer Protection
• Low Resistance Protection
• Reverse Polarity Protection
• Short-Circuit Protection
• Overheat Protection
• Low Voltage Step Down Protection
• Threaded 510 Connection
• Available in Black or Gunmetal

**Included:**

• 1 Hadron MINI Mod
• 1 Type-C Cable
• 1 18650 Battery Sleeve
• 2 21700 Battery Wraps
• 1 User Manual
• 1 Steam Crave Sticker

We all know the DNA chipset, but just in case ...




And don't forget the Escribe Software,leaves you completely in control, with updates, and customizable options....


Enough blah, blah, blah, on with the show .....


Sometimes all you need, is, well, all you need. Extras included a USB-C charging cable (for 3.0A charging), 21700 battery wraps, an 18650 adapter, and a user manual and sticker (not pictured)...


The Monolith, in all it's glory ....


SteamCrave imprinted on one side, Hadron Mini on the other, and some nice carbon fiber to round out the rear ....





Spring loaded 510 connection and a clean, flush top plate ...


Ample venting on the bottom .....


Two very strong magnets held on the back cover, revealing the battery sled.


Polarity was marked, and the spring loaded battery terminal kept the battery snugly in place ....


Yeah, you COULD adapt, but why ?? 21700's rule, especially in single batt mods ....


HEY, it's got FOUR buttons !!!! The front face greeted you with a 0.9" TFT display, up/down/select/fire buttons, and USB-C charging port, also used for updating with the Escribe software (linked below review) ...


The DNA menu system was simple to navigate and use ...



Onto the topper ....



**SteamCrave Classic MTL RTA Specs:**

• 23mm Diameter
• 3.5mL Tank Capacity
• Threaded Top Fill System - Dual Fill Ports
• Stainless Steel Tank Construction
• Dual Post Build Deck - One Terminal Per Post
• Side Secured via Hex Screws
• Single Coil Configuration
• PEEK Insulator
• Interchangeable Air Pins - 0.8, 1.0, 1.5, 2.0mm
• Threaded 510 Connection
• Available in SS and Black

**Included:**

• 1 AROMAMIZER Classic MTL RTA
• 2 0.8mm Airflow Pin
• 2 1.5mm Airflow Pin
• 2 2.0mm Airflow Pin
• 1 Blind Air Pin
• 1 3.5mL Glass
• 1 Spare 510 Delrin Drip Tip
• 1 Spare Bag of O-Rings and Screws
• 1 Clapton Ni80 Coil
• 1 Kanthal Coil
• 1 Allen Key
• 1 Steam Crave Sticker
• 1 User Manual

Enter the SteamCrave Classic MTL RTA.


SteamCrave knows how to package the goods...


They included the RTA, extra drip tip, spare glass section, driver, AND, the MYSTERY BOX !!!

Hi ECF members, In this review I take a look at the Aromamizer Classic MTL RTA from Steam Crave. The Steam Crave Aromamizer Classic MTL RTA was supplied for the purpose of this review by Sue from the Healthcabin.

Steam Crave Aromamizer Classic MTL RTA





Introduction

Steam Crave have quite a cult following and are mainly known for their large RDTA's but in more recent times have been much more diverse even showing they are very capable of delivering quality MTL Atomizers! Here I take a look at their latest MTL offering the Aromamizer Classic MTL RTA which has exactly the same drop in deck design which gets fed from a tank above as their RDTA's so why they are calling this an RTA is a bit confusing but then what most refer to as an RDTA these days are actually Top Coilers so nothing is at it seems anymore!

As well as having the usual drop in deck design Steam Crave are known for which does give the possibility of having future deck designs the Classic utilises side airflow pins for different MTL and even a RDL draw! The 23mm tank size allows for a respectable 3.5mm juice capacity while maintaining a deck size more akin to a 22mm atomizer which in my opinion is the ideal size for MTL! With the usual outstanding build quality we have come to expect from Steam Crave and coming in 2 colour options, let's check out the Aromamizer Classic MTL RTA!

_________________________________________________________________________




In The Box





Contents:

1pc AROMAMIZER CLASSIC MTL RTA (single coil deck and airflow pin 1.0 mm*2 fitted)
2pc 0.8 mm airflow pin
2pc 1.5 mm airflow pin
2pc 2.0 mm airflow pin
1pc blind air pin
1pc 3.5 ml glass
1pc spare 510 Delrin drip tip
1pc spare bag of o-rings and screws
1pc coil, clapton Ni80, 32 Ga*2+38 Ga, ID 2.5mm, 5 wraps
1pc coil, K-A1, 28 Ga, ID 2.5mm, 7 wraps
1pc Allen key
1pc SteamCrave sticker
1pc Manual

_________________________________________________________________________



Aesthetics


The Classic is immaculately presented in the usual Steam Crave flip open presentation box, I received the Black, the options are Black or Stainless Steel. The front has the Steam Crave logo carved into the lower metal while we have more carved branding to the rear, to both sides we get more aesthetic features in the form of airflow pins that screw into position.

Above the metal we have a glass section which is followed by a stepped top cap and metal nipple style MTL drip tip (a straight Delrin drip tip is included). The bottom of the RTA has the decks retainer base section which has knurling which matches the knurling to the top cap, both helping with grip! On the base we have the usual branding, safety stamps and a Gold plated 510 pin. With it's 23mm diameter but small drop in deck into a reduced chamber it retains classic MTL attributes while it's slightly bigger diameter allows it to look much better on most devices!




_________________________________________________________________________



Classic MTL RTA Specs and Features:

Diameter: 23mm
Height: 34.4mm (tank) 48.8 (including drip tip)
E-juice Capacity: 3.5ml
Filling Type: Top filling
Airflow: Adjustable side airflow
Coil Building: Single coil deck
Air Pins: 0.8mm, 1.0mm, 1.5mm, 2.0mm and a blind air pin
Deck slots into chamber (potential for alternative decks)
Colours: Stainless Steel, Black






_________________________________________________________________________



What You Receive?

In the box you receive the Classic RTA with installed metal MTL nipple style drip tip, 3.5ml glass and the two 1.0mm side airflow pins installed. You also receive a straight Delrin drip tip with the same size narrow bore if you prefer, below is a photo with the Delrin drip tip installed!







You also receive the customary Steam Crave sticker, extensive manual, T-piece tool, spare 3.5ml glass and a handy little tub housing the other accessories!





Inside the Accessories tub we get a bag of spare O-rings and screws, a simple round wire coil K-A1, 28 Ga, ID 2.5mm, 7 wraps, 0.4ohm, a fused clapton Ni80, 32 Ga*2+38 Ga, ID 2.5mm, 5 wraps, 1.0ohm, and the other different sized airflow pins.




_________________________________________________________________________



It's Various Parts!

Up top we have a narrow bore metal drip tip which as mentioned can be swapped for a Delrin version, the top cap fastens to the tank via threading to the chimney section with a top O-ring for a good seal. I much prefer a bayonet fitment but this has silky smooth threading and can be removed and re-installed very quickly!

The chimney section screws away from the lower metal section of the tank leaving the top section of the fill plate with chimney, lower retainer ring which sits between the glass and lower metal section and the glass between, all these parts disassemble very easily!





To the top of the bottom metal section we have 2 slots that allow the juice to travel down cavities in the double walled lower section and feed the deck from below. The base screws off revealing the Classic utilises a drop in deck that pulls out. Looking inside the chamber we can see the reduced upper section where the build area will sit and an airflow pin to either side which will hit the sides of the coil with jets of air!





Below is the tank completely taken apart:




_________________________________________________________________________



The Airflow Pins

The airflow on the Classic is adjusted by fitting different sized pins into the sides, as usual you get the obligatory blind pin but as this is direct airflow to the sides of your coil and not airflow feeding a bottom airflow outlet it's beyond any logic I can think of to have airflow only hitting one side of the coil so needless to say the blind pin is something I will just never use!


The pins screw into the tank so you will need to use a screwdriver until they are out far enough to get a grip with your fingers, likewise to fasten them in position a screwdriver is needed to tighten. Obviously they are small pins so you need to keep them safe as they can easily get lost but that just goes with the territory of MTL tanks that use some form of airflow inserts or pins! My main concern is with the Black tank especially if someone likes to constantly swap out the pins will the heads of the pins and finish surrounding the area to where they get installed get scuffed up, only time will tell!





On the Black pins included with the Black Classic the size of the bore on each pin is clearly labelled in White although obviously the writing is very small but it's hard to see how they could be labelled any better with being so small in diameter!

Obviously when writing this review I have already tried the various pins so this is how I found them:

0.8mm - not super tight but still a tight MTL draw (too tight for my preference)
1.0mm - A cigarette type draw which I really enjoyed for MTL with this particular RTA (pre-installed pins)
1.5mm - Still a MTL but on the loose side
2.0mm - Very versatile still possible to do a MTL but very loose but these pins installed gives a very decent RDL draw




_________________________________________________________________________



The Deck and Build

The deck has posts at the diagonal which have top terminals with grub screws fastening from the sides, so very similar to how you would install the coil on a postless deck. Apart from little MTL coils are a bit fiddly (to be honest now lockdown is over I need to get my eyes tested, struggling a bit) this is a very easy way of installing a coil, we also have a little wall each side with a cutout to rest a coiling rod to get the perfect height! You do however need to cut the legs of the coil to the correct length, the posts are about 2mm in height with good sized grub screws so it does allow for a little in length error and will still get trapped nicely into position, it does say 4.5mm if you wish to use a coil cutting guide tool!

The pictured build was using the Ni80 Clapton which came out at 0.92ohm, since I have also done a second build using one of @Charln Hybrid SS/N80 MTL Aliens (Bearded Viking Customs) which is also purring nicely!
After fastening your leads into position just give your coil a few low wattage pulses and strum out any hotspots until the coil glows from the middle outwards!





Then feed your cotton through the coil and leave each end long enough to feed down to the bottom where it will get fed with juice from below, then fluff up and tuck down! I then primed the cotton and gave it a few pulses to admire my work, fitted the deck into the chamber, screwed on the base section and filled!




_________________________________________________________________________



My Thoughts!

Let's put it this way I have been using the Classic for a couple of weeks and already purchased a Stainless Steel version based on it's performance but I have had one issue with it!

After a build and fill it's a dream but when refilling at first I got quite bad flooding, I have since increased the cotton which did make a difference but after 2 builds and about 6 re-wicks trying different amounts of cotton I still get an over-saturated vape just after a fill although it soon clears after a few vapes and then begins to puurrrrrr!

The Classic is super smooth with the only sound being the crackle of the coil, I particularly like the 1.0mm air pins which is a bit tighter than I normally do MTL but with the classic it's such a smooth vape with flavour for days, I also enjoyed a very decent RDL with the 2.0mm pins despite not using a coil which would be more suited to vaping this way and although the Classic doesn't give a Super tight draw the 0.8mm pins should be tight enough for most! Of course you do have that blind pin for more draw options but having the air from just one side isn't for me!

Other pros are the looks, build quality (including silky smooth threading) and 3.5ml capacity! I do worry about the Black finish with needing to use a screwdriver to loosen and tighten the pins but can't really put it has a con because that's something only time will tell. I also would of preferred a bayonet fit top cap but at least the threading allows Steam Crave to show off how silky smooth the threading is!

You get loads included and as always it's very well presented but I always say any rebuildable should come with everything needed to do at least one build yet there is no cotton included. Yes a very small thing and many will say but everyone has cotton but they would be factually wrong because someone always has a very first rebuildable and if that happens to be this then they eagerly take it out it's box to find they need to order some cotton before they can even use it, just throw a bit of cotton in Steam Crave! I have tried both deserts and fruits and the flavour is quite outstanding!!!! My final pros is the fact the airflow pins can be swapped out on the fly which many will like!

Because I have been experiencing over-saturation (on the cusp of flooding) after filling then for me this would benefit from juice flow control but apart from that performance wise this is right up there with the best MTL RTA's I have used!




_________________________________________________________________________



Likes

Excellent build quality
Silky smooth threading
Very well presented
3.5ml Capacity
Included Airflow pins for adjustability
Airflow pins can be swapped on the fly
Very easy coil installation
Drop in deck
Possibility of future decks being released
Quite tight MTL right up to a RDL draw!
Airflow super smooth
Tried both desserts and fruits, flavour excellent
2 different drip tips included
2 different coils included
Spare glass included
Can be easily stripped down for cleaning purposes


Cons

Get oversaturation after filling (soon clears)
For above reason would benefit from JFC
Airflow pins could get lost easily
Would prefer bayonet fit to top cap
No cotton included (petty I know but have to be consistent)

I would once again like to thank Sue from the Healthcabin for supplying the Steam Crave Aromamizer Classic MTL RTA, thanks for reading and stay safe!

Steam Crave Aromamizer Classic MTL RTA

_________________________________________________________________________

I bought the Efest luc v4 elite but it doesnt charge 21xxx or charge if a battery is depleted past 15% . I have the Miboxer c12-4 which does but I have gone thru 2 of them. What would people recommend?

Once again I say hello and welcome back for another review. Todays review is on 1 of a series of 3 new Target kits from Vaporesso, the Target 80 is the baby brother of the 3 having a built in 3000mAh battery and the Target 200 is a dual 18650 device that I reviewed already, and that leaves the Target 100 that is a single 21700 or 18650 when using the included adaptor with maximum wattage output of 100 watts using either type of battery. All three in the series use the new iTANK with new GTI coils that really perform well. Lets have a look at the features of this kit before my review later on.




COLOR CHOICES





INCLUDED WITH THE KIT





SPECIFICATIONS AND PARAMETERS







FEATURES

• Wattage Range: 5 - 100W
• Resistance Range: 0.03 - 5.0ohm
• Output Mode: VW / Pulse / F(t)
• Compact yet Versatile Box Mod
• Single 18650/20700/21700 Battery (Sold Separately)
• Advanced AXON Chipset
• Intuitive Firing Button
• 0.96 Inch TFT Color Screen
• Water-Resistant Braid
• Durable Zinc-Alloy Construction
• Bottom Hinged Battery Door
• 510 Connection
• Type-C Fast Charging
• Short Circuit Protection
• Burn Protection
• No Load Protection
• Overtime Protection
• Low Resistance Protection
• Low Power Protection
• Overcharge Protection
• ESD Circuit Protection
• Pass Through Protection

RUGGED BUILD YET VERY COMFORTABLE





COMPACT SIZE





EASY TO OPERATE





NEW TANK





NEW GTI COILS





LEAK RESISTANT





SMOOTH AIRFLOW









EXPLODED VIEW





UNBOXING AND FIRST IMPRESSIONS


One thing that Vaporsesso usually does with their kits is make the first impression of the device look great and they continued with the Target 100 Kit, the device, tank with a protective shipping cover ( not shown ) incidentally Target 100 uses straight glass instead of the bubble glass used on the Target 200 , spare straight glass tube with extra O-rings inside it, 2nd 0.4Ω mesh coil and the braided type-c charge cord all tucked in their own compartment within the box, all your paper documents are tucked in a nice cardboard envelope. The 18650 battery adaptor is pre-installed inside the device.

The first thing that I noticed was the fabric on the device that is hard to describe, it's a braided fabric that has a comfortable feel to it and wraps around to the back of the device on both sides to the middle portion where they are separated by a metal bar that runs from top to bottom with Vaporesso engraved on it. The 2nd thing that stood out to me was how compact it is, it's also very lightweight, and the 3rd thing I noticed was the 510 platform on top of the top plate, I really wish that Vaporesso would stop using this platform on devices for 2 reasons # 1 it limits the size of your atomizer to the size of the 510 platform , # 2 it detracts from the style on the device. A flush fit would have been a better choice to use, maybe the internals of the device prevented it from being a flush fit.







Getting back to the fabric that wraps the device I have a hard time trying to describe it for you, it's soft but grippy because of the braids within, there is some cushion feel to it but very little. I was sent the gunmetal and Red color and really like the way both colors contrast with each other and pull together a winning look for the device. Vaporesso really did a fantastic on the attractive look of the Target 100, even the back of the device looks great with Vaporesso deep engraving on the metal bar that separates the fabric.







The battery is loaded into the device via a bottom battery door that is very flimsy when the device has no battery inside but once a battery is installed it is rock solid, you actually push up a bit when closing the door then slide it shut for a secure closure. Axon chip as well as Target 100 is branded on the door.





Battery polarity is only marked with a minus symbol on the door, no positive marking or symbol inside the battery tube, if using a 21700 battery pull the 18650 adaptor out of the tube before installing the battery.






iTANK


We now come to the new iTank that has a new coil lineup as well, 0.2Ω mesh, 0.4Ω mesh and coming soon 0.15Ω mesh and others. This is a 5ml tank with straight glass, I am glad that Vaporesso decided against using the bubble glass that's in the Target 200 kit , coils are a push & pull type with no flat spots that need to be lined up.








The iTank is a top fill tank that uses a swivel out top cap that is very secure when put back in place for vaping, it actually clicks into place when closed , I have not had any unwanted openings while it was in my pocket. If using a 100ml bottle to fill the tank you will have to remove the drip tip in order to get the bottle stem fully inside the self sealing fill membrane. You will notice a arrow underneath the Vaporesso name that is where the top cap needs to be pushed in to open for filling. Always prime your coil and let sit for 5 min before first vaping it. This is a very simple easy Sub-Tank with no mess or fuss. By the way this is a 510 drip tip and it's comfortable to use. The iTank has 3 airflow intake slots and that makes it very airy fully open but closing the slots halfway restricts the airflow to a very nice DL vape that's half as airy, closing down to a 1/4 gives a great RDL vape. Airflow is smooth at any setting that's used.




The iTaste Tank ships with the GTI 0.2Ω mesh coil that's rated for 60-75 watts pre-installed, the 2nd GTI coil is a 0.4Ω mesh rated for 50-60 watts. I will say that the mod is usually the star of the show with kits but this iTank is really very good and the GTI coils perform great giving great flavor with thick clouds of vapor also.

As many of you know I like a warmer vape and the 0.2 is more my speed but using the 0.4 was a treat as well, I must be gravitating to liking a cooler vape as well as my normal warm one because I really enjoy both coils.





The Target 100 device has no settings for TC use but does have many power modes to choose from and they are Vaporesso's F(t) mode, PUL - pulse mode, VW- variable wattage, Bypass, in the DIY section of the second sub-menu there is a further way to tweek VW with 3 more choices of Soft, Normal or Hard setting for wattage mode. There is a Smart setting as well.

There are pre-set display screen colors for different power modes when activated. Power mode colors are listed below, the smart feature when activated will appear above ohms. The display screen is very bright and vivid with easy to read fonts, the wattage font is very large but I would have liked it shrunk down a bit while increasing the size of the other fonts.


POWER MODE COLORS

* F(t) - Green

* Pulse - Red

* Wattage - ( Soft ) - Red
* Wattage - ( Normal ) - Blue
* Wattage - ( Hard ) - Red

* Bypass - ( Red )

MAIN MENU


* ON/OFF - 5 Presses Of The Fire Button

* LOCK/UNLOCK WATTAGE - 3 Quick Presses Of The Fire Button

* CHANGE POWER MODES - Long Press The Middle bottom Menu Button
Once Flashing Press Either Adjustment Button to Move



* SUB-MENU - 3 Quick Presses Of The Menu Button Brings You To The Sub-Menu
Once There Either Adjustment Button Moves You Along To Your Desired Setting


PROS - TARGET 100 MOD

* Attractive

* Compact Size For A SINGLE 21700 Device

* Comfortable

* No Sharp Edges

* Easy Menu System To Navigate

* Multi-Colored Display Screen

* Flawless Performance

* Fast Response Time

* Solid Build Quality

* Type-C With 2A Charging

* Axon Chip


CONS - TARGET 100 MOD

* Raised 510 Platform

* Font Size Should Be Larger / Wattage Size Font Should Be Smaller
( EQUAL FONT SIZE )


PROS - iTANK

* 5mm Capacity

* Top Fill

* Comfortable Drip Tip

* Great performing GTI Coils

* Great Flavor

* Thick Vapor Production

* Smooth Airflow On Any Setting


CONS - iTANK

* Using 100ml Bottles Drip Tip Must Be Removed When Filling


USING THE VAPORESSO 200 KIT


First thing that I want to mention is the compact size of this device, I am in the construction industry and started using a single 18650 mod from another manufacturer that I reviewed a few years back that was built to be abused and take a beating, I wont mention the device or manufacturer but I'm sure you know which one I'm talking about, when I took the Target 100 out of the box and set it down on my desk the mod I just mentioned was next to it and the Target 100 with a 21700 battery is actually smaller in size.

I really like the looks of the device that was sent to me with the Red and Grey contrasting colors coming together nicely, I really like the deep engraving down the back of the device, it gives it a bold look.

After my first look over I set the device down on the desk and heard something that clang like it wasn't closed completely, the noise came from the battery door. With no battery inside the device the door has a lot of play to it and that worried me but it's like that for a reason, once a battery is installed you have to push up with the door to slide it over to latch shut, once the door is shut it's rock solid.

Vaporesso is using a braided fabric on the mod that is hard to describe, it's soft and grippy while feeling tough at the same time and it's water resistant according to Vaporesso.

I really like the Axon chip inside the device because of smooth power delivery, power mode choices and easy menu to navigate through. One thing I wish will be changed in the next mod is the size difference of the fonts, the wattage font should be scaled down and the other fonts scaled up, sometimes it's a little hard to see the smaller fonts with aging eyes.

Having reviewed many Vaporesso devices I am familiar with their F(t) mode and really like it and I can taste a difference using it over wattage mode, some people can't tell a difference but I can and prefer it over straight wattage mode.

There are 5 different power modes to choose from but no TC modes, I know some people do use TC but I don't know of any personally.

I really hope that Vaporesso stops using the raised 510 platform on any new devices because it's really the only thing that I dislike with the device.

The new iTank is a very nice tank with a 5ml capacity with the straight glass, as far as the new GTI coils goes I think they are great coils and definite winners in my book, both have performed very well giving a saturated vape with a abundance of vapor.

I think Vaporesso did a fantastic job with both the device and tank. Battery management is really good as well especially when using the 0.4Ω coil.

I would like to thank Sue and Healthcabin for providing the Target 200 kit for the purpose of my review and I hope all your questions were answered concerning the Target 100 Kit.

THANK YOU
BIGBOB2322

Wotofo Disposables Part Deux: The Ultra and Mega!

Hello again, vaping community! I am finally back with another review for the ECF community. This time, we will be having a look at Wotofo’s newest disposable devices on the market: the Ultra and Mega. These were kindly sent to me for review by Wotofo (thank you, Cara!).

If you guys have had the chance to read my previous review on ECF, and that so happened to be about Wotofo disposables too (the Airy, Wafer, Mini +), I had described some introductions on Wotofo there. I also mentioned some considerations about disposable e-cigarettes, and the controversy in the community about their rise and use. Saying all that, it looks like Wotofo are really putting their mark in the now highly-congested but very lucrative disposables market. Indeed, at least to me, it seems like they had recently released far more disposable products than their usual fare of atomisers and mods. Perhaps it is driven by demand, or maybe atomisers/mods take longer to design and implement than disposables. But whatever the reason is, these disposables are here now and will be in the market soon enough.

As before, my review will be from my own experience of using these devices in everyday life as a regular vaper.

Wotofo Ultra


Quick specs:

- 24.6 x 112.8 mm. Yep, it’s tall and chunky!

- 550 mAh battery

- Made from food-grade PC

- Having a 1.4 ohms mesh coil

- 8.5mL e-liquid volume and claims to have an up to 3000 puff-life.

- Rechargeable via a micro-USB port.



The Ultra is a pen-like (more like a fat pen) disposable vape made mostly of plastic. In keeping with other Wotofo devices, this has big and bold branding printed on it, although it does become a little minimal around the device which was a nice change to see.

It’s a typical disposable that works on auto-draw. What sets it apart from most disposables in the market is that it is rechargeable, and thus can afford to carry so much e-liquid inside. It is very light and pocketable though, owing to the materials used.

The auto-draw is very responsive, and its duckbill-type mouthpiece is comfortable enough. The draw is a medium MTL to me though, with the air coming from the bottom via a hole beside the concealed white LED indicator light that lights up when charging and when the device is in use. I do feel that Wotofo missed a trick here in not including an adjustable airflow, even a basic slider type. As it stands, I could not get a tight MTL, and this should certainly be a consideration for smokers who would like to use this device to simulate a cigarette to avoid it falling short of expectations.


Another point to note is the use of a micro-USB port as opposed to USB-C. Devices that have come out in the last couple of years have started to incorporate USB-C ports for its obvious advantages. And so I’m a little puzzled as to why Wotofo stuck with a (retro) micro-USB port for this device, especially so because the devices do not come with their own charging cable.

The Ultra comes in a variety of flavours, and I was sent these flavours: Grape Ice, Mango Peach Pineapple Ice, Blueberry Raspberry Ice, Sour Apple, and Pineapple Coconut. As with most disposables I have sampled/reviewed, all of the flavours have varying degrees of cooling in them. As I mentioned in my previous review, I am not a fan at all of ice or menthol vapes, but the flavours of the Ultra are very well done in that the cooling doesn’t flood my mouth when vaping. To further elevate the vape experience though, I wished that the draw was warmer. The Ultra can definitely afford to because it has a rechargeable battery. Currently, the draw is rather tepid: ideal in the summer but will feel really cold in the winter because of the “ice” in the e-liquid. Let’s put it that way.



Did it last the advertised 3000 puffs though? Well, at the time of this review, I have not managed to empty or exhaust any of the Ultra flavours sent to me. So, it is definitely lasting a fair while, and I think it will indeed last at or close to the advertised number because of the Ultra’s rechargeable nature.

From a low power state, it takes about an hour or so to charge which is pretty good. All in all, it’s a simple device to use and get on with. Flavour and (relative) cloud production is really nice owing to the use of mesh coils.


Wotofo Mega


Quick specs:

- 20 x 105 mm in dimensions. This one is sort of short and fat.

- A whopping 980 mAh of battery.

- Made from SS304 and food-grade PC

- Having a 1.6 ohms wire coil

- 5mL e-liquid volume and claims to have a 1500 puff-life.



The Mega is another pen-style disposable device. In contrast to the Ultra, the Mega is lathered in branding and product information all printed throughout the circumference of the device. I did wish it was a little understated than this, but I know better as this is a Wotofo device!

It has a round drip tip that narrows in the middle, which is my preference as far as MTL devices are concerned. Although it holds less e-liquid, the Mega is actually slightly heavier than the Ultra, and that is likely because it has almost twice the battery capacity. It needs this capacity to be able to use up the 5mL of e-liquid it comes loaded with.



This one is a classic open and use disposable: there is no ability to recharge it and no feature to be able to customise draw either. Speaking of draw, it is almost the same at the Ultra’s as a medium MTL. So, as mentioned earlier, this should be a consideration for those wanting that tight MTL to simulate the smoking experience. I suggest for Wotofo to consider adding a simple airflow control option on the Mega so that the user can tailor the draw to their desire.

And like the Ultra, the draw is also not warm- so I have the same suggestion for Wotofo here to make the draw warmer. However, I am not quite sure if that will be practical because increasing the warmth also increases the demand on the non-rechargeable battery. That might mean not being able to use up all of the pre-loaded e-liquid in the device. But, maybe making the draw tighter via adding an airflow control feature might make the draw a tiny bit warmer.

It also comes in a wide selection of flavours, and I was sent the Mint, Strawberry Ice Cream, Strawberry Banana Ice, Mango Peach Pineapple Ice, and Watermelon Ice. All of these flavours went down very well with me, making my vaping experience enjoyable. Cloud production was OK, and was about what I expected from a low wattage device using wire coils.

As for puff-life, it had indeed lasted me a relatively long time. Was it close to the advertised 1500 puffs? I’d say so, although I have a feeling that the battery may go first before the all of the e-liquid is used up.



Final Thoughts:

I know I mentioned a few “wishes” on these disposables, but overall, my experience of using these Wotofo disposables has been a treat! As a vaper for years, I know the kind of vape I enjoy and what needs to be changed to achieve that, hence the wish list peppered throughout my review. But for a smoker that is curious about vaping or those wanting to try it, these are certainly good devices to consider in making that transition. The flavours are really well done and punchy, enough to satisfy cravings.

These will certainly stay in my rotation as back-up devices in the car or when I need a device in a pinch!

My sincerest thanks again to Wotofo for allowing me to review these products!

So I’ve read some of the discussions about rayon wicking and I wanna try it. On Fasttech they have different diameters of braided wick, is that what I should order?
I usually build 2.5mm coils, is 2mm rayon the ideal size? Also, why is it braided?
$21.94 (Free or Cheap Shipping) Silica Wick for Rebuildable Atomizers (50M / 164ft) (Wick, 2mm*50m) at m.FastTech.com

Ordering on the internet for ready made e-juice certainly has gotten expensive just lately. It seems that the shipping costs have just about tripled to get the juice to your door from an on-line vendor.

I have a couple of questions maybe some of you folks that understand the system can answer:

1. I understand that USPS, UPS and FedEx cannot ship vape related materials (to include ready-made juice) anymore to US residential addresses ... Well, when you order juice now, who is providing the shipping and delivering it to the door ?

2. As I mentioned above, it seems like the shipping cost has pretty much tripled ... is that because some shipper other than USPS, UPS or FedEx is charging triple what USPS, UPS and FedEx used to charge for shipping ?

Note: It was not very long ago that I ordered and had delivered to my house (here in Florida) a 1 liter bottle of 100mg unflavored nicotine base. I didn't have to sign for it and it was delivered right to my mailbox by USPS.

I am very confused as to all of this ... Can anyone here tell me how ready-made juice is now being shipped once I pay triple shipping charges to some on-line vape company ?

Thanks ...