Innokin Kroma 217 100W Starter Kit consists of Kroma 217 Mod and Z Force Tank. Innokin Kroma 217 box mod is powered by single 18650/20700/21700 battery with max 100W output and type-C charging.

Features:
Urved ergonomic design, crafted with premium zinc alloy
Powered by single 18650/20700/21700 battery, 6-100W output
Ideal for DL and RDL vaping
Revitalise vape with Coil+ & Refresh
USB-C fast charging
All-new Z Force DTL tank
5ml capacity, top-fill design
Spring loaded automatic e-juice flow control to prevent leaking and wasted e-liquid
ZF coils with DuoPrime wicking

Innokin Vape in USA Z Force Tank has 5ml capacity with top filling design. Z Force Tank features spring loaded automatic e-juice flow control to prevent leaking and wasted e-liquid.
Don't miss out on this sale as black friday deals on vapes is underway!

You may also like:

vaal 2500m for sale
steam crave hadron lite advanced combo kit

I've been looking for tube extensions for some of the popular 21700 mech mods but they're getting hard to find. I did find an extension tube for a Tauren and am eagerly waiting for it to be delivered from China.

I was looking at some 18650 mods. For instance Vaporider has a clone of an Origin Mod that comes with three tubes. The large tube is for an 18350 battery and has two female ends - one for the top cap and one for either the switch or an extension tube. The extension tubes have a male end and a female end. Add the small extension tube for an 18500 battery (adds 150 mm), or add the medium extension tube for an 18650 battery (adds 300 mm).

I was wondering that if I were to buy more than one of these mods, that I might find a combination of extension tubes that would fit two stacked 18650 batteries. Has anyone ever done that?

Actually it's looking doubtful because there's no combination of 150 or 300 that adds up to 650. But if I bought five of these mods, used one 300 mm tube for the first 18650, and added four more 300 mm tubes and five 150 mm tubes, it would add up to an additional 1950 mm which is equal to three additional 18650 batteries.

So it would work for four batteries. Hmm... 16 volts. That would probably burn up the switch pretty fast, but I'd have five switches to burn through.

I'd have to wrap two 2 ohm coils which would result in 16 amps and 320 watts!
I don't think the coils would fit into an atomizer for an 18650 mod.

I could go through the same calculation for 18350 or 18500 batteries, but now I have a headache.

Fun to think about but stupid.

The VapeSmarter UK "Anywhere" DNA 250C is, as the name suggests a new variant of the older "wedge" style mods that VapeSmarter were releasing more than 3 years ago.

VapeSmarter UK "Anywhere" - CHAPTERS

00:00 - Intro and specs
02:00 - Close up
14:00 - Temp Control & Wattage Vape
16:00 - Thoughts


Login to view embedded media

@low_tar_neil

I placed an order for $130 worth of product on November 8, 2021 and another order for $100 on November 12, 2021. I’m aware it says could take up to 14 days max but that time has come and gone and my order still shows as “preparing to ship”

I contacted support through vaping.com website on November 18th. Finally got a response on November 22 from support stating:

“Thank you for getting in contact with us regarding your orders V100651146 & V100652273.
I have forwarded your email to our shipping department, who will contact the shipping carrier and look at getting this resolved asap. We will be in touch shortly.
Thank you once again for getting in touch and for your patience.
Jamie
Vaping.com
Support Team”

Today is the 24th and it still shows the same thing, I have been OUT of my products since the 18th and I had to drive all the way to Indiana and pay DOUBLE the price for a small amount praying my order would arrive. Now I’m almost out of those and still nothing!

My husband has been out of work since October 10th and was hospitalized with COVID pneumonia and I do not have money to go and buy anymore. I’ve got $230 tied up here.

Someone please help me

Hey all,

I posted here a few days ago: Switching from Kr808 to Smok

And it was recommended that I check out the available mods from the store, rather than going with a Smok kit.

The store only sells Innokin mods, and I didn't know what questions to ask the gal on the phone. I know absolutely nothing about mods.

For someone who's only used KR808s for their entire e-cig career (at least 5 years now), what am I looking for if I'm deciding between a Smok kit and an Innokin mod? What questions should I ask the staff when I head in today?

Please keep in mind there is no local to me store, I'm out of town for Thanksgiving, so this is my one chance to stock up. What am I buying? Extra coils, for sure. But what else?

Thanks in advance for any advice you can give!

i need a legend battery door new or used is ok just need it to work

Dear ECF Friends,

Thanks for your participating~
The Voopoo DRAG X PNP-X Kit Giveaway has ended, please feel free to check the winner below, congratulations!!

#102 @Epsonikatu

Please DM us below infos to get the prize shipped, thanks.

Name:
Add:
City:
State:
Post Code:
Country:
Tel:
Email address:

-------------------------------------------------------------------------------------------------------------------


Hope you are doing well these days!


We are so excited that the Black Friday, an exciting shopping weekend is just around the coner. So Healthcabin is now partnering with Voopoo to giveaway the brand new Voopoo DRAG X PNP-X Kit with 1 luckly winner.

Feel free to check the details below.


Voopoo DRAG X PNP-X Kit is made of metal and leather, so DRAG X PNP-X is not only soft, but also has advantages of anti scratch, anti perspiration and anti fingerprint. It is powered by single 18650 battery. With the new GENE.TT Chip, Drag X features fast ignition (only takes 0.001s) and high burst. GENE.TT Chip also offers intelligent functions such as PUSS and SCORE ranking mode. In addition, the SCORE ranking mode helps you continuously unlock the new level from “IRON” to “KING” according to the cloud size of each suction. It comes with 5-80W power range to fit your needs and the 80W max power will enable you to make bigger flavorful clouds. Drag X is designed with the innovative infinite airflow system that supports the regulation of any size of airway. Most importantly, you can enjoy the most comfortable experience through this system no matter which kind of coil or different parameters are set! As for the pod, it can hold 5ml big e-juice capacity and adopt a wide range of coils, including RBA. 510 adapters and other new technologies are also be added to this pod. DRAG X PNP-X is equipped with 0.15ohm and 0.3ohm PnP coil and it is compatible with all PnP coils.






Do you wanna test it? Take the chance to join us and win it home for free.


How To Enter?
Word Chain Game - Take the last letter from the last post and post a new word(about vaping) begins with the taken letter.


Example:
Voopoo
Oxva
Abyss
...
So let's start with: Drag X

Note:
1. 1 lucky winner will be randomly selected by random.org on 2nd Dec.
2. You must be over 21.
3. Number your entry, for instance: #Post 1, #Post 2...But No Continuous Posts at the same time.
4. Max 10 replies for each participant.


Good luck to you all!

Pulse AIO Kit comes with a great of compatibility. The tank can work in most boro style mods. Most importantly, there is a DIY RBA Tank of 3.5ml capacity and a pre-built tank of 5ml capacity, which will satisfy your different vaping needs. The DIY RBA Tank is designed with curved airflow for large or small coils. The height of the positive table is adjustable. USB type-c charging will provide reliable power and smooth charging. Vandy Vape Pulse AIO Kit supports 21700, 20700 and 18650 (a 18650 adapter included) cell. You can customize button and plates easily for DIY fun. Pulse AIO Kit is compatible with VVC coils.


Vandy Vape Pulse AIO Kit Giveaway, 1 winner, ends on December 7th

Enter here

ThunderHead Creations introduces the Tauren Beest RTA, a 24mm evaporator with 4.5ml bubble glass and large dual coil deck.

The ThunderHead Creations THC Tauren Beest is made from 304SS and Pyrex glass and measures a total of 24 mm * 41 mm. Inside the tank there is a sophisticated dual coil deck, which is easy to handle and is optimally ventilated via the infinitely adjustable bottom airflow. We fill the Tauren Beest quickly and easily via the liquid opening under the TopCap, which thanks to the size, can also be used with large drip tips.




Features:
Innovative appearance pattern
Unique double sides with 26 hexagonal honeycomb airflow system
Convenient top filling system
Innovative Aluminum package with 510 stand basement
...

Click here for more:

Tauren Beest RTA: ThunderHead Creations Tauren Beest RTA

Tauren Beest RTA Tube: ThunderHead Creations Tauren Beest RTA Glass Tube

Tauren Beest RTA Accessory Bag: ThunderHead Creations Tauren Beest RTA Accessory Bag

Sourcemore 2021 Black Friday & Cyber Monday Sale

6 Rounds Flash Sale from $0.01
--Limited 5PCS/Day. 20:00, Nov. 24th - Nov. 29th, GMT+8 Time

Hot Deals & Big Discounts

10% OFF SITEWIDE Coupon: BFCM
(Sale page items excluded)

Bronze Level Exclusive 5% OFF Coupon: BFCM5
(Must log in, sale page and special discounted items excluded)

Sale time: Nov. 24th - Dec. 2nd

Enter here<<<Sourcemore 2021 Black Friday & Cyber Monday Sale

Vapefly Nicolas II MTL Tank black and Rainbow has two version: G Version S Version to offer ultimate MTL vaping. Vapefly Nicolas II tank features very restrictive airflow for strong throat hit. Nicolas II MTL Tank comes with 2ml capacity with top refilling system and FreeCoreTM N series coils to produce excellent flavor. Vapefly Nicolas II adopts Pull & plug coil replacement.

Features:
Ultimate MTL vape experience
FreeCoreTM N series coils produce excellent flavor
Compatible with Nicolas coils(BVC 0.6hm coil and BVC 1.8ohm coil)
Top refilling system
Pull & plug coil replacement

Buy cheap Nicolas II Vape Coils is compatible with Vapefly Nicolas Tank, Vapefly Nicolas II Tank and Galsxies Starter Kit. It is the FreeCore™ coil, which can ensure excellent flavor and long lifespan. There are 0.8Ω/1.2Ω mesh coil for your option. 5pcs each pack.

Vapefly Nicolas II MTL Tank G/S Version Glass Tube is a firm glass tube designed for Nicolas II MTL Tank G/S Version Tank.

Black friday 2021 vape deals is going on,welcome to buy the best vape tanks.

You may also like:

voopoo drag s pnp x kit near me
drag nano 2 pod cartridge review

Freemax Marvos T 80W Vape Starter Kit is an all-in-one vape pen-style pod mod kit, consisting of a Marvos DTL Pod and Marvos T Battery, containing a 3000mAh internal battery for a whole-day vaping also with 2A Type-C fast charging within 90 minutes.

While Freemax Marvos 60W is Freemax’s first pod mod kit with Tri-Proof Technology, consisting of a Marvos DTL Pod and Marvos 60W Mod, powered by a 3000mAh internal battery for a whole-day vaping with 2A Type-C fast charging within 90 minutes. The IP67 Dust-Resistance and Water-Resistance and a high level of Shock-Resistance make Marvos 60W Kit perfect for extreme outdoor activities.

Freemax Marvos 60W and Marvos T 80W Kit are paired with the same vape pod - Marvos DTL Pod, adopting the industry-leading mesh coil technology FM COILTECH4.0 (Tea Fiber Cotton Formula & Military Grade SS904L Mesh). But as for you, which one do you like better, Marvos 60W or Marvos T 80W?

I have the nic, flavorings ,pg ,vg. Now i need to order a scale and other accessories needed. Was wondering if I could get some good advice on which brands and what exactly makes life a little easier to have when mixing or the necessities needed. Also a good calculator for mixing by weight??
Scale
Bottles
Syringes
ect... please fill in anything else you can think of so I can get this show on the road!!

Freebie on All Orders Placed(only China Warehouse) from Nov.23rd to Nov.28th (HKT)
Vouchers for 2Fdeal Orders (Limited Quantity)
Vouchers Apply to All Products (Included Flash Sales Products)

$2 (Code: THANKS2, for order over $20) 200 Vouchers Only
$5 Voucher (Code: THANKS5, for order over $40) 200 Vouchers Only
$10 Voucher (Code: THANKS10, for order over $60) 100 Vouchers Only
$15 Voucher (Code: THANKS15, for order over $80) 100 Vouchers Only

Even Larger Voucher from Nov.25th to Nov.26th (HKT)

$25 Voucher (Code: THANKS25, for order over $120) 50 Vouchers Only
$35 Voucher (Code: THANKS35, for order over $160) 40 Vouchers Only
$45 Voucher (Code: THANKS45, for order over $200) 30 Vouchers Only

Up to 86% off for All ULTON Products, click here
Extra Tank and Silicone Rings for ULTON Dotshell RBA, click here
6% off site-wide coupon code: THANKS

https://www.2fdeal.com/ulton-fev-pl...lling-juice-control-kit-316ss-3ml_p17843.htmlULTON Fev Plus Kit Flash E Vapor Top Filling Juice Control Kit 316SS 3ml



Features

316 Stainless Steel

3ml Capacity

Top filling (100% no leakage)

Juice control by tank

Compatible with all Fev products sold at 2fdeal (ULTON, YFTK, SXK, Vazzling and Original version)



https://www.2fdeal.com/search/?Keyword=Charon&CateId= Smoant Charon Baby Plus 1000mAh Pod System Vape Kit 3.5ml



Compatible with Santi S-coils (S-2 Mesh 0.6ohm Coil)

U type airflow control system and dual independent airflow system

Auto-adjust wattage & auto draw

Side air inlet, no leaking

Replaceable magnetic 3D panel

2-layers protective UV films technology

1000mAh built-in battery

Supports DL, RDL, MTL vaping

New wire material with mesh structure

3.5ml pod with strong magnet

1A type-c fast charging

AI smart Ant-chip

Multiple protection: Low Voltage / No-load / Overtime / Short-circuit / Overcharge Protection

WE WANT TO HEAR YOUR VOICE(U.S. Market only)

- Take 5-10 minutes to fill out the survey and attend an online group discussion on early December, 2021

- 6 qualified winners will get $100 for each.


*Vaporesso reserves the right of the interpretation of the relevant terms.

Vaporesso zero 2 colors:

- Carbon Fiber
- Black
- Black Blue
- Black Red
- Black Green
- Black Purple






Specification:

Size: 89*31.8*19mm
Pod Capacity: 3ml(standard), 2ml(TPD)
Output Power: 1.3ohm CCELL Pod(9W), 1.0ohm Mesh Pod(11W)
Battery Capacity: 800mAh
Battery Display: Dynamic tidal light
Charging Current: Type-C, 1A
Charging Time: 45mins

In the box:

1* Zero 2 Battery
1* Zero 2 1.0ohm Mesh Pod
1* Zero 2 1.3ohm CCELL Pod
1* E-liquid Filling Bottle (10ml)
1* Type-C Cable
1* User Manual
1* Warranty Card







Here I will talk about new zero pod system from Vaporesso. This pod system is new and better version than very famous zero pod system. This device comes in really nice package where you will receive two pods and bottle to fill the pod which is amazing. Build quality of the device is really good, everything is as it should be. Dimensions of the device are 89*31.8*19mm and it fits really nice in the hand if you ask me.









Pod:

So with this device you will receive two pods which is always good. Pod stays really nice in place because of magnets. Mouthpiece is good and comfortable for using. This device is compatible with pods from previous zero which is really good and I really like this because many people have previous version and they can use pods here. Capacity of the pod is 3ml which is really good and this is better than on previous version. Filling the pod is easy, you will receive bottle in the package and you will use it to fill the pod from the bottom. You can use here pod with 1ohm coil or 1.3ohm coil.









Mod:

From the top side is slot for the pod and everything here is made very well. The design is similar as previous version but it looks way more modern in my opinion and I like it more. Also this device is very comfortable for using. The device has built in 800mah battery which is better than on previous pod system. From the bottom you can see usb c which is good and this device supports 1A charging. On the device you can see the battery indicator, you can see few led lights and I really like it. On this device you can't adjust the power but it works in constant working mode which is good, it works at 9w with 1.3ohm coil and at 11w with 1ohm coil which is okay in my opinion and really simple.










My thoughts:

Build quality is very good, really nothing to complain about. In the package you will receive two pods and bottle which is good. Mouthpiece is comfortable for using and you can really easy fill the pod with bottle from the package. You can also see eliquid in the pod which is good. Pod stays really good in the place and it is compatible with pods from previous model of the device. The capacity of the pod is 3ml which is really good. Device is designed really nice and it is comfortable for using. We have 800mah battery here and you can pretty fast charge the battery. On this device you can't change working modes but it works in constant working mode which is good for someone who want to start vaping because it is very simple. With 1ohm coil device will work at 11w, but with 1.3ohm coil it will work at 9w which is good. The device has draw activated switch that is very sensitive and works really good. Airflow is tight which is good for real mtl vaping, we can't adjust airflow here. Both pods are very good, similar as on previous zero, flavor is very good and they preform really good. In my opinion zero 2 is one very simple and friendly device that works really good.


Cons:

- You can't adjsut airflow, but airflow is really good



Pros:

- Build quality
- Included 2 pods in the package
- Bottle
- Confortable for using, device and mouthpiece
- Good 3ml capacity
- I like the battery indicator
- 800mah battery
- Good flavor
- Usb c
- Good draw activated switch


Thanks VAPORESSO
You can buy it here: VAPORESSO ZERO 2

Vapefly Nicolas II MTL Tank Atomizer 2ml, which has two version: G Version S Version, is is dedicated to giving you ultimate MTL vape experience.


With very restrictive airflow, MTL vapers can get a strong throat hit from the Nicolas ll Tank.


Vapefly Nicolas II MTL Tank G Version and Vapefly Nicolas II MTL Tank S Version adopt top refilling system and Pull & plug coil replacement. And FreeCore N series coils will produce excellent flavor on this Vapfly Nicolas 2 MTL Tank.


Features:
510 threading convection
E-juice Capacity: 2ml
Filling Type: Top filling
510 Drip Tip
Compatible with: FreeCore 0.8ohm / 1.2ohm Mesh Coil (Nicolas II Coil, included), Vapefly Nicolas 0.6ohm/1.8ohm Coil / Galsxies Starter Kit 0.5ohm Mesh Coil (not included)
Ultimate MTL experience, 5 levels airflow
Restrictive airflow to bring MTL vapers a very strong throat hit
2ml e-juice capacity, easy top refill system
Diameter: 22.2mm
Version: G version & S version


Quick links to the 2 versions of Nicolas 2 Tank as below
G Version >>Buy Authentic Vapefly Nicolas II MTL Tank Black G Version
S Version >> Buy Authentic Vapefly Nicolas II MTL Tank Silver S Version

Interested in picking up a V3 or V4

The best experience, all gathered here.XROS 2 will impress you with its unmistakeable, elegant aesthetics.

Hey, guys, come on! Vapesourcing's annual Black Friday great promotion has started, you can get vape coupons to have a discount during our Black Friday vape deals 2021.

What are you waiting for? Just come and buy it! For more details, you can click here to glace at Vape Shop Online E-Cigarette & E-liquid Best For Sale

Some products we recommend:
SMOK Nord 50W Pod System Kit 1800mAh
SLAPS 4500 Puffs Rechargeable Disposable Kit

When someone complains their tank is leaking or not wicking/feeding juice, someone usually inevitably comes along and says "you need to leave some space above your juice and create negative pressure in your tank", or something similar.

Explain to me like I am 5 years old how one goes about "creating that negative pressure" in a vape tank?

Also, in the case of juice wicking/feeding, how does negative pressure help with that?

looking for a Gp Paps X top cap only. Doesn't need to have beauty ring or airflow ring have PP, cashapp, or things possibly to trade.

Urgent - please take action, and forward to anyone who may be able to help.

Politicians and bureaucrats in Washington want to double the price of your vape through a new Federal tax on nicotine. Under the proposals, vaping would become far more expensive than smoking and hit vapers hard financially. But you can help stop it by getting in touch with Senators Joe Manchin, Kyrsten Sinema & Catherine Cortez Masco. (You can read more about what to do/say on the links at the CASAA website)

AZ VAPERS CALL KYRSTEN SINEMA NOW! DC OFFICE 202-224-4521

NV VAPERS CALL CATHERINE CORTEZ MASTO NOW! DC OFFICE 202-224-3542

WV VAPERS CALL JOE MANCHIN NOW! DC OFFICE 202-224-3954

Please don't sleep on this one, this will kill vaping as we know it, regardless of what the FDA does.

See this helpful chart from CASAA to see what the increase in tax will mean for you.

Wondering if there is anyone else here that is in Boise Idaho like me. Just want to ask about some local shops and what not. I recently order a vaporesso swag px 80, and was wondering where to get coils...other than online. TIA guys, happy vaping.

VapX Art Pod Mod & Powerbank Antimicrobial vaping
Enjoy the reading

► VapX Art Pod Mod & Powerbank Antimicrobial vaping; Packaging:
The package includes the combination of two colors; forest green for the outer sleeve and black for the inner box. On the front there is the image of the Powerbank device, the Art logo, and the presence of 2 Pod tank with 1.4ml capacity is indicated.

On the back of the box; it shows the color of this Sample (Midnight Green), some main features, the packing list, the useful addresses of VapX (Shenzhen) Technology co., limited, hologram, batch number, QR code, logos and legal trademarks.

The main device (Art) and the motto are depicted on the side; Stay Focused.





► Art Pod Mod With VapX Powerbank; Packing List:
• 1x 800mAh Art VapX Powerbank
• 1x 300mAh Pod Mod Art Vapx
• 2x 1.4ml Art VapX Replacement Pod
• 1x USB-C cable
• 1x User Manual



► VapX Powerbank Features:
• Dimensions: 58x20x100mm
• Battery Capacity: Integrated 800mAh
• Reload: Complete in 10 minutes
• Input voltage: 3.3-4.2V
• Usb Type-C port: PD3.0 / PD2.0 / 0C3.0 / CC20 MAX 18W protocol

► VapX Art Features:
• Dimensions: 17x15x87mm
• Battery Capacity: Integrated 300mAh
• Output voltage: 3.3-3.7V
• Liquid capacity: 1.4ml
• Resistance: Pre-Installed 1.2Ω
• Maximum Power: 18W
• Closed UV system
• 99% UV disinfection
• Food-safe antimicrobial steel lid
• Upload Wirless



► Art Pod Mod With VapX Powerbank; Available colours:
• Black panda
• Red maple leaf
• Midnight Green



► Art Pod Mod With VapX Powerbank; First impressions:
For this test I received the kit with midnight green color, the power bank with plastic body has a fine "rubbery" paint while the ART device inside is made of metal. The whole kit is compact and light, it can easily be placed even in a shirt pocket.

The Powerbank is built to keep the kit to a minimum size, plus vapers will no longer have to worry about battery life or forgetting to recharge the device. The Bank is equipped with a built-in 800mAh lithium polymer battery that can be fully recharged in 10 minutes via the Type C interface. After each use, simply put the 300mAh Art device back into the case for it to be recharged quickly when not you use it. This design allows for constant vaping for a whole day without compromising on portability and size.

Antimicrobial Vaping is one of the prerogatives of this Kit that addresses this very important issue for health with a non-chemical and non-thermal military medical grade technology. The closed UV system is designed inside the bank and with each closing action of the lid (in the first 10 seconds) it emits a strong concentration of UV rays on the integrated food grade antimicrobial steel tip of the Pod tank.
According to VapX, both cores contribute to 99.9% protection against bacteria, molds, fungi and even viruses.
VapX wishes everyone a safe all day vaping with no compromise in terms of risks and health issues.



► VapX Powerbank; led signals:
• When the charging case is opened, the battery level indicator lights up for 2 seconds.
1 Red light: Less than 30% remaining charge
2 Blue lights: Residual charge between 30% and 70%
3 Blue lights: Residual charge above 70%

• By closing the cap of the Powerbank (without connected device) The LED lights will turn on and show the battery level for 2 seconds.
• By closing the Powerbank cap (with the Art device connected) the light indicator on the cap will turn off after 10 seconds of UV sterilization.
• When the Powerbank charges the Art device, the LED lights will flash alternately to show the battery level of the case and the charge status.
• Once the device is fully charged, the LED lights turn off.
• While charging: The LED lights will flash and stay on when charging is complete
• Low battery warning; The LED lights will flash red 3 times (when the battery voltage is less than 3.3V)
• Warning of abnormal charge; The LED lights will blink red 60 times (the adapter is not compatible with the charging case)





► Art Pod Mod With VapX Powerbank; View of the complete kit:
On the front of the bank there is a metal button which, if pressed, opens it, on the inside of the cap there are two contacts for the reflection of UV rays directly on the drip tip of the VapX Art device inside the Bank and on the Pod drip tip of spare. Three gold-plated pins are the cap open / close "sensors", consequently and depending on the action the chipset is stressed and provides UV sterilization or light information regarding battery charge.