My control board is bad on my radius, looking for a p3 or radius I can take a board out of. Or willing to buy a radius for a good price.

One hundred specialists call for WHO to change its hostile stance on tobacco harm reduction - new letter to FCTC delegates published
"
"100 specialists in nicotine science, policy and practice have come together to call on the 182 parties (countries) to the Framework Convention on Tobacco Control to take a more positive stance on tobacco harm reduction. The letter pushes back against WHO’s misguided and unscientific drive for prohibition or excessive regulation and taxation of vaping products, heated and smokeless tobacco products, and novel oral nicotine products, such as pouches.

From 8-13 November 2021, the ninth meeting of the Conference of the Parties of the Framework Convention on Tobacco Control (COP-9) will be held online. The meeting details are here.

The letter makes seven main points relevant to FCTC parties and then six recommendations. The letter text must speak for itself.

The letter in final form

Several signatories have made statements on the letter, or on WHO’s approach to tobacco harm reduction and innovation. These are set out here.

The letter text, references and signature list are included below in English:.........."

2. E-cigarettes are a driver of smoking cessation
Since COP8, evidence has continued to accumulate supporting the role that e-cigarettes play in reducing smoking. In particular, the Cochrane Review, which provides a world-renowned synthesis of clinical trial evidence, concludes in September 2021:[3]

Nicotine e‐cigarettes probably do help people to stop smoking for at least six months. They probably work better than nicotine replacement therapy and nicotine‐free e‐cigarettes. They may work better than no support, or behavioural support alone, and they may not be associated with serious unwanted effects.

The trial evidence is supported by observational studies, population trends, market data and user testimony.[4] Taken as a whole, the evidence makes a compelling case that smoke-free alternatives to cigarettes displace smoking......."

See whole article here:
One hundred specialists call for WHO to change its hostile stance on tobacco harm reduction – new letter to FCTC delegates published

By using a new resistant cover braid, the #TARGET 200 will be ideal for enjoying your outdoor activities, even in winds or rain!

Different from previous DRAG series, Voopoo Drag Nano 2 has small but powerful body. It not only perpetuate the professional performance of DRAG series, but also creatively tailor-made the appearance smaller and more exquisite. With the feature of simplify the complexity outside but maintain the strength inside, Drag Nano 2 will provide a unique experience for you!





Capacity: 2ml
Material: PCTG
Resistance: 0.8ohm, 1.2ohm
Size: 72*44*14.2mm
Material: Zinc alloy+Leather/PC
Output Power: 8-20W
Output Voltage: 3.2 - 4.2V
Resistance: 0.1 - 3.0ohm
Battery Capacity: 800mAh (built in battery)
...

Click here for more:

Drag Nano 2 Kit: Voopoo Drag Nano 2 Pod Kit

Dear Customers,

Hope you are doing well these days!

Here comes Healthcabin new round of brand discount promotion for wholesale only, Oct Brand Discount – Round 2, with 3% off for selected 10 brands. Take the chance to join us and save more on your favorite vape-brand products!

3% OFF Selected Hot Brands

• Discount: 3% OFF for selected 10 hot brands
• Date: 18th – 25th Oct, 2021(-0600 GMT)
• Wholesale ONLY
• No coupon code required, total discount amount can be found at your shopping cart

10 of our best selling brands listed below:

• Geekvape
• VAPORESSO
• SMOK
• VANDYVAPE
• WOTOFO
• FreeMaX
• DIGIFLAVOR
• LOST VAPE
• HUGO VAPOR
• Joyetech

With any questions, please feel free to contact your account manager.

Please view the Oct Brand Discount – Round 2 here.

Freemax Marvos MS Mesh Coil adopts Freemax’s latest FM CoilTech 4.0 technology(Tea Fiber Cotton Formula & Military Grade SS904L Mesh), which has outstanding performance in making abundant clouds and marvelous flavors at 20-80W for RDL and DTL vaping. MS Mesh Coils utilizes Freemax Patented Mesh Coil Structure, which not only increases the maximum atomization contacting surface inside the coil, accelerates the absorption speed of cotton, but also improves the heating speed of the whole coil.



Tea fiber cotton adopts superior cotton for refreshing flavor, faster absorption than your imagination, and Military-grade SS904L mesh feature a longer lifespan, larger explosive power, evenly and sufficiently heated, which offers users excellent flavor performance. Due to MS Platform, now here are four types of Marvos MS Mesh Coils and more MS series Coils on the way for Freemax Marvos Series Kits(Marvos 80W, Marvos S 80W, Marvos 60W, Marvos T 80W). These Marvos MS Series Mesh Coils: MS Mesh Coils 0.15ohm & 0.25ohm & 0.35ohm & 0.5ohm are inspired from Freemax world-known Fireluke Series Sub Ohm Tanks.

As a new continuation of the Ursa series,the URSA NANO pod kit evolves into a pocket-friendly pod kit with sensational throat-hit and super stable flavor maintenance for beginners and MTL lovers to enjoy the satisfying experience of vaping.


Lost vape in USA URSA NANO features an incredibly lightweight and relatively slim that is easily invisble in the pocket during on-the-go vaping.URSA NANO is constructed from durable zinc-alloy,it adopts different textured plates on both sides of URSA NANO pod kit.The pattern changes color depending on the light ang angle you see it through.

The refilable 2.5ml capacity URSA NANO pod includes a more comfortable drip tip which meets the ergonomics demand.URSA NANO allows a rapid firing and power output of up to 18w,providing a responsive auto-draw every single time.

URSA NANO packs an internal battery at 800mAh that can also perform admirably and is no problem for most vapers to last all day vaping.

There are 2 resistence coils for choice integrated in these all-in-one URSA NANO pods,allow you to chase different flavor in this positive device.Clear URSA NANO pod design lets you easily check the e-liquid level.

Please go to vape online store to visit.

Quick Link:Lost Vape Ursa Nano Pod System Kit 800mAh

I have something a little bit different to show you this time, it’s the Kamry K1000 Plus Epipe, sent to me by Sourcemore for the purpose of this review.





The K1000 Plus is an inexpensive and fun bit of kit, and although I wouldn’t think of it as something I’d vape all the time, it’s a lot nicer than I expected.






In the box, you’ll get:

• Kamry K1000 Plus Battery/pipe body
  
  
• Kamry K1000 Plus atomizer
  
  
• Drip tip
• Coil
  
  
• Micro USB charging cable
  
  
• User manual
  
  
• Warranty card
  
  

It comes in black or brown, and I got the black option, although it’s actually a dark brown. The battery body is made of zinc alloy and the drip tip is plastic. All the surfaces are smooth and flawlessly finished.





The battery is 1,000mAh and supports a resistance range of .30 - . 9ohms. There is no power adjustment, so the output will be dependent on the resistance. The on/off and fire button is on top, where the bowl of the pipe would be. It turns on and off with three clicks, and the LED lights up while firing, and blinks three times when plugged in to charge. It seems to charge quickly, but as there is no battery life indicator I can’t be sure how low it was to start with.



The atomizer has a capacity of 4mls, and the included coils (the package says one is included, but I got two) are .5ohms. The coils are alright, not the best I’ve tried, but surely not the worst. They don’t last me as long as better ones do, but the flavor is fairly good. The tank has good air flow, and can tighten down to a tight MTL, or open up to a nice restricted DL. I’ve had no leaking, flooding, or any other problem with it. It’s a 510 connection top and bottom, so you could – as I will – swap it out for your favorite tanks.



The drip- tip was too tight to get on, so I had to remove the first O ring. It stays on just fine like that.



Overall, it’s nice looking, comfy in the hand, and the bottom is angled in such a way that it sits on the table securely and keeps the coil in the juice.



Thanks, Sourcemore for the opportunity to review the Kamry K1000 Plus Epipe!

Hello and welcome back for today's review of the Voopoo Doric 20 that was sent to me for review from Voopoo. This is a very simple and easy to use AIO having no display screen or wattage adjustments other than it's 3 power levels of LOW, MED, and HIGH just like it's big brother the DORIC 60 that I recently reviewed, if you missed it I will leave it's review link here VOOPOO DORIC 60 KIT REVIEWED BY BIGBOB2322. As simple as it is there are some nice features that it has that make a world of difference on a AIO Pod System, so lets open the envelope and see if it's a winner or just a runner up in this crowded field of AIO Pod Systems.




COLOR CHOICES





INCLUDED IN THE BOX





FEATURES

* Matte finish, convenient grip

* Internal 1500mah battery, type-C fast charging, 8-18W output

* LED lights to show output

* MTL vaping

* Auto or button modes

* 2ml cartridge, leakproof side filling design

* Compatible with all ITO series coils


SPECIFICATIONS





ATTRACTIVE LIGHTWEIGHT AND SLIM





ANTI-LEAK POD







PRECISE CHANNELED AIRFLOW





NEW ITO MESH COILS







ADJUSTABLE AIRFLOW





CLEAR 2ML POD WITH BOTTOM SIDE-FILL





ATTRIBUTES





AUTO-DRAW OR MANUAL BUTTON PRESS





1500mAh INTERNAL BATTERY WITH TYPE-C 1.5A FAST CHARGING





ANTI-SKID BOTTOM





SEVEN SAFETY PROTECTIONS





UNBOXING AND FIRST IMPRESSIONS


Just like it's big brother the Doric 20 rest in a plastic tray housed inside a box with the charge cord, user manual, and both coils in a separate box that is fitted underneath the tray that the Doric 20 is in.

I received the Gray colored one that is of a lighter shade of Grey than the Doric 60 that was sent earlier. The color is kind of metallic that has a shimmer to it and looks attractive to me.





Picking the device up it's lack of weight was a nice touch though I thought it would be fairly light. The pod ships without a coil pre-installed and when I tried to pull the pod off the Doric it took considerable force to release it from the device, no magnets are used to hold the pod in place but rather 2 small tabs located 180° from each other that slip over a thin metal band at the connection point.

This pod is a side-fill that located toward the bottom with a fill plug that is very thin but easy to open by sliding your finger across it, the fill port isn't the largest and I wouldn't recommend using a glass dripper bottle tip to fill but 100ml tips work fine.

The mouthpiece is part of the pod so there is no putting on your own drip tips but it's a true MTL mouthpiece that narrow enough to get the job done while being comfortable as well.





Voopoo has a new coil that's used in the Doric 20 pod called the ITO coil that is a mesh style on both the 1.0Ω and 1.2Ω.These coils are the push in type with 2 flat sides that have to be matched to the flat sides of the pod when installing the coil in the pod.





These new ITO mesh coils although similar in diameter have different air supply openings from each other. The 1.2Ω mesh coil has 4 separate air holes to channel airflow while the 1.0Ω mesh coil uses 2 slots 180° apart from each other. Both coils produce pretty good flavor but the 1.0Ω produces more vapor with a slightly looser draw, don't get me wrong these are both MTL coils and work well but you can get a very very tight RDL vape with the 1.0Ω with all 3 air holes open on the airflow control if that's what you like.





Just like the Doric 60 does the Doric 20 gives you a choice to either use the fire button or you can use the auto-draw feature that it has. I feel that the auto-draw is better on the Doric 20 than the 60, it really works very well and I've been forcing myself to not use the button because I prefer to Button fire and the auto-draw has fired every time.

Inside the connection spot of the pod/device are 2 gold colored spring loaded contact pins to connect to the coil and between them underneath the metal support rim lies the auto-draw air nozzle tube.





Turning to the bottom of the device Voopoo put a rubber bumper on the protect the finish if of desk or table which it does do but it also can make it prone to tip over if the table or desk it's sitting on is bumped, even sitting it down it wobbles for a second.

I always keep my eyes on the juice level and always refill when juice in the tank reaches half, so laying it down is not a issue for me besides the airflow control lever and fire button stick out just enough to prevent it from rolling off any surface it's laid on. There are 2 ventilation holes in the center for battery safety.





On the Doric 20 there is adjustable airflow via 3 airflow holes and each hole is a different size, that should make most MTL vapers happy providing differing selections. The first air hole that is closest to the airflow control lever is the smallest with the next being slightly larger and the next one being the largest of all three.

You can get the auto-draw to engage even fully closed so some air is still flowing but nobody would vape it that way, way to tight ( eyes popping out tight ), the type-c charge port location is underneath the airflow selector.

Fully open it's a loose MTL and with 2 holes it becomes a somewhat tight MTL vape, 1 holes makes it super tight, my preferred setting is 2 holes open. Auto-draw works very well on all airflow selections.









The Doric 20 has a very tiny but bright LED light right above the fire button that illuminates when vaping or charging, this LED light has 2 functions, 1 function is to select your power level of which there are 3 and they are color coded, you battery strength corresponds to the colors as well. When charging the LED will breathe on and off until fully charged where it will remain solidly lit. Turned on/off is done as most devices by pressing the fire button quickly 5 times, once on 3 quick presses of the fire button will change your power level, each time you press the fire button 3 times the power level will change.

LOW - ( GREEN ) - 10W

MEDIUM - ( BLUE ) - 12W

HIGH - ( RED ) - 14W





PROS

* Lightweight

* Attractive

* Good Flavor Producing Coils

* Comfortable Mouthpiece

* 3 Power Levels

* Auto-Draw

* No Leaking

* Adjustable Airflow

* 1500mAh Internal Battery

* Nice Button Feel


CONS

* Fill Hole Could Be Larger ( FOR GLASS DRIPPER TIPS )

* Fill Port Plug Very Thin


USING THE DORIC 20


I really like the metallic color that sort of shimmers in some lighting, this light Grey finish isn't slippery at all and hold very well in the hand.

In the week I've been using it I haven't had any leaking from either coil, I will say the 1.2Ω really drops in the vapor production from the 1.0 Ω coil but that's not a bad thing in fact it's been beneficial to me this week, I had to spend a number of hours in a place that was to far away from outside doors and there was no place to have a vape except a very small rest room that had staff coming and going , but I managed to hide my vaping in there because of the 1.2Ω coil without getting caught.

The 1.2 is a good coil with good flavor but not as good as the 1.0 that became my favorite of the two, but I thought it would before even trying them because I like a warm vape and the 1.0 coil satisfied me more. Throat hit was good for both as well.

I did not get a full day of battery life but more like 5 or 6 hours of heavy use, flavor was so good that I left my standard mod and RTA at home and just brought the Doric 20 and another pod system from another manufacturer to work for the week of testing, this is something I never do.

In closing I think Voopoo did a great job on the Doric 20 and the new ITO coils perform very well, the auto-draw actually works great on the device in any airflow setting selected.

Having the 3 airflow choices is a big plus there's actually more than 3 if you close the holes down in slivers. I think every MTL vaper should be able to find a setting that they like on the Doric 20. I will 100% recommend the Doric 20 for a half a day of heavy vaping and being that it charges fully in about 1 hour you wont be down for long.

I would like to thank Aimer and Voopoo for providing the Doric 20 for the purpose of this review, if your in the market for a AIO that has good flavor producing coils with adjustable airflow options and is a true MTL AIO get yourselves one, it's a winner.

THANK YOU
BIGBOB2322

Looking for a Vaponaute Le Supersonic. Authentic preferred if the price is right but will consider YFTK or SXK clones.

PayPal ready. Thanks!

What it b my people, happy to have found a place like this, only been vaping for 1yr and already have a collecting problem. Just wanted to say hi and hope to make some friends with similar interest. Peace and peanut oil!!!

Thanks for joining me again for another review. Today I’ll be discussing the newly released Voopoo Drag Nano 2 that was sent to me by Voopoo to provide a fair and honest review for you. I never had a chance to try the original Nano so will not really be able to do a fair comparison. I will instead just focus on my experience testing the Nano 2 and do my best to point out the features. The Nano 2 contains an 800mah battery with a maximum output of 20 watts. The included pods have a liquid capacity of 2ml and are compatible with Vinci Pod cartridges.







WHAT’S IN THE BOX?






SPECIFICATIONS:




FEATURES:

- Stylish and Exquisite Appearance

- Top-Fill and Visible Cartridge

- Leak-Resistant Pod System

- Customized Various Vape Experiences

- Three-Level Adjustable Power

- Compatible with VINCI Pod Cartridge

Hello folks. I’m back again with another review. This time I will be taking a look at the Voopoo Doric 20 Pod Kit that was sent to me in order to provide this review. The Doric 20 is a smaller version of the Doric 60 that I reviewed not too long ago. The Doric 20 has an aluminum alloy body with a PCTG pod and contains a 1500mah battery and a 1.5A charging capacity via the USB-C charging port.







WHAT’S IN THE BOX?



SPECIFICATIONS:




FEATURES:

1. Supports ITO series coils

2. New cavity design for better leakage prevention

3. Accurate air holes matching brings excellent MTL vaping

4. Corrugated anti-skid design

5. Slim aluminum alloy body

6. Visible pod with better leakage prevention

7. Stable power output tech brings stable flavor

8. ITO airflow design helps to control airflow and solve leakage problem

9. Dual activate modes: Puffing or Button-pressing

10. 1.5A upgraded Type-C fast charging

11. Output Over-current/Over Discharge/Max Power/Short-circuit/Overtime/Over-temperature/Overcharge Protection


























INITIAL THOUGHTS:

The packaging of the Doric 20 is very similar to what it was on the Doric 60. You open one end of the box and the device slides out while sitting in a plastic tray and the accessory box is strategically placed underneath to conserve space and box size.

Included in the package is the Doric 20 that has a 1500mah battery which I think is a great capacity for this size of device. Already installed is the empty pod and in the accessory package are two coils which are 1.0 ohm rated at 10, 12, and 14 watts depending on the setting and a 1.2 ohm coil rated at 8, 10, and 12 watts depending on the setting. Also included in the accessory package is a USB-C charging cable and a user manual.

On the front of the Doric 20 is the Doric name etched near the bottom and above that is a single button and indicator light. The Doric 20 can be activated with the fire button or can be used in auto draw. The button operation is as follows:

- Press the fire button five times to turn the device on or off

- Press the fire button three times to change the output level

- The three output levels are: High=Green/ Medium=Blue/ Low=Red

- The device will auto lock after 15 minutes and can be woken by either pressing the fire button or simply taking a puff



The indicator light also acts as a battery level indicator when the device is activated normally. The three levels of the batter are as follows.

- Green= 66-100%

- Blue= 33-66%

- Red= <33%




On the back side of the unit is the airflow slide control with three airflow holes and a lever sticking out that makes the adjustment very easy but is stiff enough to not move too easily. Also found on the back is the USB-C charging port.





On the top of the Doric 20 is the pod receptacle that contains the two spring loaded gold plated contacts and not visible is the airflow sensor tube which sits a little higher than the base. Even though there is the metal ring inside that we normally see with magnetic pods, this one does not have magnets but the pods snap into place very securely and it takes a bit of effort to remove them.



On the bottom of the mod is a silicon cover with two battery vent holes. My guess is that the silicon is to prevent the device from sliding when sitting upright on a table or other flat surface but the diameter is so small on this device that it still could be easily knocked over. I have just been laying it down flat when not in use.



The 2ml pods are clear with very little tint to them which I greatly appreciate the ease with which the liquid level can be seen. The coils are simply push to seat. I do wish though that with a 1500mah battery capacity that the liquid capacity could have been a little more like perhaps 3ml.



The tip of the pod is fixed but it is comfortable enough to me. This pod is a side fill. The rubber plug has the Voopoo name on it and has an arrow on it pointing to the side to lift in order to fill. I was able to use a standard 10ml plastic bottle to easily fill the pod and once again since it is mostly clear you can easily see the liquid while filling so you don’t make a mess.

As I mentioned earlier, there are two coils included in the kit. There is a 1.0 ohm and a 1.2 ohm coil. It might have been nice had they made the o rings different colors on the coils to make it easier for the visually challenged to tell the difference in resistances.








FINAL THOUGHTS:

I actually enjoyed testing the Voopoo Doric 20 pod kit. I felt like both coils provided good flavor and a decent amount of vapor. I did find that when on the highest setting that the tip could get a little hot if chain vaping but was not an issue with normal use.

I very much like that the Doric 20 has an airflow control. I did end up running it completely open most of the time but it’s good to have the option to tighten up the airflow if you feel like it. I found myself running mostly in the medium range with both coils.

I like that Voopoo stuck with mostly clear pods on this one. I do wish it had a little more liquid capacity or that they had included a second pod in the kit. I had no leaking during my time using the Doric 20 which was over a week of use. I really hadn’t noticed any condensation either. This is a big improvement from some of the other Voopoo pods that I’ve used in the past.

The Doric offers both button fire and auto draw functions and I found it most natural to use it in auto draw. Even with the airflow slide completely open, the auto draw sensor worked very well which is another improvement on Voopoo’s part compared to past auto draw devices. I feel like they are constantly trying to improve on their products and it shows in their airflow sensor on this one and the Drag Nano 2.

So, would I recommend the Voopoo Doric 20 for you to purchase? Here’s the thing, if you want what seems to be a solid pocket carry device that could possibly last a day out and about depending on your vaping style then yes I’d recommend it but you’re going to need to carry a bottle of liquid or extra pods since I doubt that 2ml will last most people a day but the 1500mah battery very well might.

I’d like to thank Voopoo and Milo for sending the Doric 20 pod system for this review and also thanks go out to all the readers. Below is a link to the website if you’d like to look around.

VOOPOO VAPE Spark Your Moments

Has anyone got both the Venna and the Duet? I'm curious about comparisons before I buy one.

To me it seems like the Duet might take slightly chunkier coils before it gets hot, am I wrong?

Any input appreciated.

I'm now on my 3rd Drag X in 6 months. First one the firing button stuck on, whatever, I got most of a year out of that so I bought another. Now I'm getting weak hits and a low power message stopping my hits. I'm only vaping 30W on a .3 coil, and my batteries are usually about 4.10 volts left when this starts to happen. I switched from 25r's to LG and it's still happening, bought another drag X, exact same thing. Any ideas? I really don't want to get a new vape considering how plentiful the coils are. I'm also using it for nic salts MTL so my choices are kind of limited.

Hi all! (New here...)

I have been vaping for a long time now (over a year and a half) and have run into a sudden bit of paranoia that Google cannot seem to solve. I know that there is a lot of controversy surrounding how toxic nicotine really is. I have always been decently responsible with my vaping, primarily used vuse products, but there is always a possibility for anyone who vapes to have the tiniest leak... not the persistent kind, but the usual stuff.. This is what bred my paranoia, wiki says that the lethal dose for children is 0.1 mg/kg ... that would mean a fraction of a drop could kill an infant. What bothers me even more is that nowhere can I find any info on whether or not e juice in small drop/smudge/ect amounts evaporate or dry over time, or become non-harmful. The only related info I can find on Google are people concerned with whether their stock is evaporating and steeping related things. I have recently started a job where I work with playground equipment and have become paranoid that somewhere in my house there is a drop of juice just chilling waiting for me to stick my hand in it, not notice, and somehow have it end up somewhere and hurt somebody. I know this probably sounds paranoid to most but, I still find it odd that nowhere on the internet is there any info (that I can find) that would calm my paranoia. I suddenly feel the urge to wipe down every surface of my house with rubbing alcohol...and have smoked my first pack or two of cigarettes in years...

Any knowledge to help with this would be greatly appreciated...

The Jai Haze / MK Mods Inception is a new mod designed by Jai Haze and manufactured by MK over in Greece. Featuring a DNA 250C, magnetic battery door and a replaceable shell.

Jai Haze / MK Mods Inception - CHAPTERS

00:00 - Intro and specs
04:00 - Close up
16:00 - Temp Control & Wattage Vape
18:00 - Thoughts

Login to view embedded media

"Therefore, says the FDA, “In light of the clear evidence that flavored e-cigarettes attract youth to an addictive product, FDA determined that the [Tobacco Control Act’s] public-health standard would be satisfied only by robust and reliable evidence of countervailing benefits."

"But the FDA offers no evidence that it is the flavors that attract youth to vaping. The agency merely asserts that it is so, based on prevalence of use. They offer no proof that teenage vaping would cease without the existence of non-tobacco flavored products. Nor does the FDA offer “product-specific evidence” that Triton’s e-liquids currently are used by youth.

The agency merely states that 85 percent of youth begin vaping with flavored products, as though that is justification for eliminating products that millions of adults prefer. The FDA’s logic seems to be that since some teenagers use these products, they obviously cannot be marketed responsibly to adults."

"
Not counting Turning Point Brands, at least eight petitions for review have been filed so far in federal court........

"
More MDO challenges filed in 5th Circuit Court of Appeals......

See full article here:
MDO Update: FDA and Triton Argue in Court Filings

I've had the banners below in my signature for a long time. Now they can't be seen in my posts. Does anybody know why?

So I’ve got this old 26650 mod and I bought a new battery for it but it won’t fit. It’s ever so slightly too large. this thing:

Was the top selling 26650 on liion wholesaleanyway, I’m hosed. Pulled off various packaging to make it fit and it still won’t so I own it now even though it’s useless. What battery SHOULD I be buying? It’s clearly not this one.

New in box, black Provari Classic.
$135 shipped obo