Threads
-
Locked
Is It Safe to Vape Around Pets?
- Univapo
- 3 Replies
Pets and vape have something in common, aside from bringing little joy to some lives, both were also considered as life-changing factors. A change for a much better us.
According to the research of some credible sources, pets like dogs and cats are vulnerable to nicotine exposure so we must observe necessary safety precautions like keeping vape smoke away from our pets.
And more important is to safeguard our vape devices and pets or those precious belongings will ruin both of them.
Have a great day lovely people.
-Univapo
According to the research of some credible sources, pets like dogs and cats are vulnerable to nicotine exposure so we must observe necessary safety precautions like keeping vape smoke away from our pets.
And more important is to safeguard our vape devices and pets or those precious belongings will ruin both of them.
Have a great day lovely people.
-Univapo
-
Locked
Cheap Yuoto Mini Bar Disposable Vape For Sale
- By Verashu
- Vapesourcing
- 0 Replies
Hey guys. Today let's look at the Yuoto Mini Bar which is a new disposable vape of around 1200 puffs. It is available in a load of flavors, so there's always one for you. Here we go!
Yuoto Mini Bar is such a mini-unit that you will underestimate it. Slammed with incredible appeal, it boasts a 650mAh built-in battery and houses a 4mL vape juice capacity, enough for you to take 1200 puffs per unit, and equipped with a 1.0ohm coil, which saves power and is sufficient to support its pumping. Requiring no maintenance, charging, or refilling of any kind, without any burden, you can throw it away after use.
Each one uses 5% synthetic salt nicotine which gives you greater experience satisfaction that ordinary e-juice can't bring. Yuoto Mini Bar adopts a fashionable appearance design and metal luster shell, it has enough metal feel in the palm of your hand. Packed with its 15 brilliantly crafted flavors, each mini bar can stimulate your taste buds and make you drooling, which is worth trying in such a hot summer.
Check for more details here: Yuoto Mini Bar Disposable Vape Kit 1200 Puffs 650mAh
You may also like:
drag x plus pro review
bantam kiwi berry salts
Yuoto Mini Bar is such a mini-unit that you will underestimate it. Slammed with incredible appeal, it boasts a 650mAh built-in battery and houses a 4mL vape juice capacity, enough for you to take 1200 puffs per unit, and equipped with a 1.0ohm coil, which saves power and is sufficient to support its pumping. Requiring no maintenance, charging, or refilling of any kind, without any burden, you can throw it away after use.
Each one uses 5% synthetic salt nicotine which gives you greater experience satisfaction that ordinary e-juice can't bring. Yuoto Mini Bar adopts a fashionable appearance design and metal luster shell, it has enough metal feel in the palm of your hand. Packed with its 15 brilliantly crafted flavors, each mini bar can stimulate your taste buds and make you drooling, which is worth trying in such a hot summer.
Check for more details here: Yuoto Mini Bar Disposable Vape Kit 1200 Puffs 650mAh
You may also like:
drag x plus pro review
bantam kiwi berry salts
-
Locked
Wanted WTB: black delrin 22mm-24mm atty flow ring
- By inswva
- Member Classifieds and Swaps
- 0 Replies
-
Locked
Coming Soon! Uwell Aeglos H2 60W Kit
- By vapbig
- HealthCabin
- 0 Replies
Uwell Aeglos H2 Kit is a portable pod mod kit. It has 1500mAh built-in battery capacity with type-c fast charging, and the wattage range is 5W-60W. You can rotate it to adjust airflow you want between your fingers. Aeglos H2 Kit comes with meshed 0.18ohm coil for DTL vaping, meshed 0.2ohm coil for RDL & MTL vaping. In addition, It features self-cleaning tech to bring you a clean and convenient vaping experience. A 0.96 inch OLED screen will tell you details vaping information, such as puff counter, wattage, voltage.
Features:
1. Self-cleaning tech, condensation-collecting in time
2. Comfortable grip, too light to hold
3. 0.96 inch OLED screen
4. 1500mAh battery capacity, type-c fast charging
5. Rotate cartridge to adjust airflow
6. 0.18ohm DTL coil and 1.2ohm RDL+MTL coil included
...
Click here for more:
Uwell Aeglos H2 Kit: Uwell Aeglos H2 Kit
Features:
1. Self-cleaning tech, condensation-collecting in time
2. Comfortable grip, too light to hold
3. 0.96 inch OLED screen
4. 1500mAh battery capacity, type-c fast charging
5. Rotate cartridge to adjust airflow
6. 0.18ohm DTL coil and 1.2ohm RDL+MTL coil included
...
Click here for more:
Uwell Aeglos H2 Kit: Uwell Aeglos H2 Kit
-
Locked
Vandy Vape Nox Pod Kit Giveaway, 1 winner, ends on August 12th
- By Ema
- Sourcemore
- 0 Replies
Nox Pod Kit is a exquisite, small and durable pod system kit. The mod is built with 1600mAh battery and can fire up to 60W max. USB Type-C charging design makes the charging fast and convenient. Nox Pod Kit comes with two pods: 4.5ml DL Pod and 3ml MTL pod. You can rotate the cartridge to adjust the airflow from DL to MTL. Nox Pod is compatible with VVC Coils.
Vandy Vape Nox Pod Kit Giveaway, 1 winner, ends on August 12th
Enter here
-
Locked
Freemax Vape Kits: Which Type Do You Like Best?
- Freemax
- 1 Replies
Now you can buy one pod system, pod mod, vape pen, or box mod kit produced by Freemax vape manufacturer. The Onnix series kits are pod systems kits, while the Marvos series kits are pod mod kits, and the Maxus series kits are box mod kits, so which type of vape kit do you like best?
For more information about Freemax vape kits, please click here>> Kits | Freemax - Taste the Clouds, Feel the Flavors!
For more information about Freemax vape kits, please click here>> Kits | Freemax - Taste the Clouds, Feel the Flavors!
-
Locked
VOOPOO SEAL 40 WATT POD MOD REVIEWED BY BIGBOB2322
- By Bigbob2322
- Device Reviews
- 4 Replies
Hello and welcome to today's review of the Seal Pod Mod from Voopoo that has a couple of nice features especially if your a regular user of Voopoo's PNP Pod and coils. Here's a brief description of the Seal and it's features prior to the review. As most Pod Mods in this size class the Seal utilizes a 1200 mAh built in battery and is a wattage only device with a range of 5-40 watts with the Voopoo smart feature that protects the coil stopping wattage adjustment at the maximum wattage of the coil you select. I'll cover more about the Seal shortly but first lets get to know the Seal.
COLOR CHOICES
IN THE BOX
SPECIFICATIONS
IP66 RATED
FEATHERWEIGHT
AUTO - DRAW OR BUTTON PRESS
GENE CHIP
MTL POD
TYPE-C
DEVICE FEATURES
MTL PNP POD AND FULL SIZE PNP POD CAN BE USED
INCLUDED COILS
CAN USE MOST PNP COILS - ( 40W MAX )
FIRST IMPRESSIONS
Mt first look at the device was a bit of a shock because after sliding the tray that the Seal rest in out of the box I saw only the device with the pod attached but no coils or charge cord or protective color matching full sized bonnet as the 2ml has. But they were there tucked in underneath the plastic tray the Seal rest in. The Seal has a IP66 rating and is encased in silicone rubber, even the pod has a color matching protective bonnet that makes the device look like a one piece unit. This is a real featherweight weighing only 72 grams. The Seal has fully adjustable airflow that has 5 airflow holes and is adjusted using a lever shown in the picture below.
Voopoo supplies 2 coils in the kit and both are for MTL especially since that's the type of drip tip that comes on the PNP MTL Pod, the drip tip is a proprietary one so no changing it out for one of your own but I found it to be comfortable to use. The 2 coils provided are a 1.2Ω vertical wire build rated for 10-15w and the other is a mesh 0.8Ω coil rated at 12-18w.
The coils are PNP push and pull with no flat spots to line up which makes it very easy to install. The 2ml PNP pod attaches to the device using 4 very strong magnets that connect to the recessed metal ring of the device. The 2 ml pod uses the same bottom fill method as the full size by pulling out the attached rubber plug. I've been using PNP pods for a very long time and they still work as well as when new so longevity is no issue. In the picture below I pulled off the MTL bonnet and rested the device on it, the pod on the left rest upon the full sized pod bonnet that is included in the kit. I would advise you to lift the bonnet up to view juice levels because with the bonnet on it cast to much of a shadow to clearly see the juice.
As you can see with the bonnet on even the full sized PNP pod makes the device and pod look like a 1 piece unit, Both the MTL and full size PNP pods are very tough and durable and will be even stronger wearing protective bonnets. The full size pod fits like a glove while not looking out of place because of it's size difference to the MTL pod. The 5 airflow holes are adjusted by either opening or closing 1 hole at a time, having all 5 holes open gives a loose MTL draw and by reducing the amount of holes open restricts it. Completely closed showing no open holes you get a cigarette like draw, my preference is 1 hole open.
The seal is a very small device and because of it's size the bottom of the device was probably the only spot on the device that Voopoo was able to place the type-c charge port, the cover is easily opened because of the small indent on the side.
The Seal's functioning buttons are pretty straight forward with the fire/power button at the top with a line drawn through it, below it is the display screen followed by the up/down buttons at the bottom. Even though the display screen window is very small I can stick read everything on the screen easily and that was a surprise because my eyesight isn't the best.
At the top of the screen is your battery bar, below it is the wattage selected and below that are your draw or inhale selection. If you choose the letter A your inhale selection will be auto draw, if you choose the letter P you will be using the fire/power button to fire the coil. Below your selection of firing the coil is the coils ohm reading followed by the puff counter.
With the Seal having no menu and just a couple of button combinations it's really simple and easy to operate and in my opinion a nice starter kit for anyone that has quit smoking.
* On/off - 5 presses of the fire/power button
* Locking the entire device is done by hold the fire/power button and up button down simultaneously
* Changing draw modes is done with 3 presses of the fire/power button
* Clearing the puff counter is done by holding the fire/power button and down button simultaneously
FINAL IMPRESSIONS
Coils provided work very nicely for MTL with the 0.8Ω mesh giving a very saturated flavorful vape, you won't be clouding up a room but it's not intended to do so. The vape at 16 watts is a semi warm one and because the flavor at that wattage hit my sweet spot I saw no need to run the Seal any higher which also saves battery life. I am able to make it through almost a full work day on one charge.
The 1.2Ω coils doesn't have as much flavor as the 0.8 mainly because it's a straight wire vertical coil and not mesh but it's still a satisfying vape with the ability to make it through a full work day and then some on 1 charge.
The silicone rubber covering the device really gives it a protective bumper and having a color matching pod bonnet of the same material makes the device appear as a single unit. I thought I would have a problem with it sticking to my pocket but it does not, slipping it in and out of a pocket is no problem.
The fully adjustable airflow works very well for a MTL application giving a loose MTL vape with all 5 airflow holes open and a very cigarette type of inhale with all holes completely closed, there is still some airflow fully closed so you should be able to find a sweet spot somewhere in this range.
Ergonomics are good and it almost disappears in the hand leaving just the tip of the mouthpiece showing, and speaking on the mouthpiece I found it to be comfortable to use and liked the height of it as well as the bore size.
Having the ability to use the full size PNP Pod on the Seal is a nice bonus that gives more options on how the Seal can be used. Providing a extra bonnet for the full sized PNP Pod was a nice touch, having the bonnet on really pulls everything together.
If you inhale very strong and deep the auto draw feature should work for you but I don't inhale very deeply and found the auto draw feature didn't function well for me, I'm a button presser anyway so I rarely use auto draw.
Having the charge port on the bottom of the device means you will be pulling the cover to it off when charging time arrives, replacing the cover be sure to fully seat it back into place or the Seal will wobble a bit standing up. If you lay the Seal down the airflow selector lever protrudes just enough to prevent it from rolling off the surface it's on.
All in all I think Voopoo did a nice job with designing the Seal and think it's a good started kit for someone just quitting smoking and wanting to get into vaping.
I would like to thank Aimer and Voopoo for providing the Seal for review and I hope this review has helped anyone looking to purchase the Seal.
THANK YOU
BIGBOB2322
COLOR CHOICES
IN THE BOX
SPECIFICATIONS
IP66 RATED
FEATHERWEIGHT
AUTO - DRAW OR BUTTON PRESS
GENE CHIP
MTL POD
TYPE-C
DEVICE FEATURES
MTL PNP POD AND FULL SIZE PNP POD CAN BE USED
INCLUDED COILS
CAN USE MOST PNP COILS - ( 40W MAX )
FIRST IMPRESSIONS
Mt first look at the device was a bit of a shock because after sliding the tray that the Seal rest in out of the box I saw only the device with the pod attached but no coils or charge cord or protective color matching full sized bonnet as the 2ml has. But they were there tucked in underneath the plastic tray the Seal rest in. The Seal has a IP66 rating and is encased in silicone rubber, even the pod has a color matching protective bonnet that makes the device look like a one piece unit. This is a real featherweight weighing only 72 grams. The Seal has fully adjustable airflow that has 5 airflow holes and is adjusted using a lever shown in the picture below.
Voopoo supplies 2 coils in the kit and both are for MTL especially since that's the type of drip tip that comes on the PNP MTL Pod, the drip tip is a proprietary one so no changing it out for one of your own but I found it to be comfortable to use. The 2 coils provided are a 1.2Ω vertical wire build rated for 10-15w and the other is a mesh 0.8Ω coil rated at 12-18w.
The coils are PNP push and pull with no flat spots to line up which makes it very easy to install. The 2ml PNP pod attaches to the device using 4 very strong magnets that connect to the recessed metal ring of the device. The 2 ml pod uses the same bottom fill method as the full size by pulling out the attached rubber plug. I've been using PNP pods for a very long time and they still work as well as when new so longevity is no issue. In the picture below I pulled off the MTL bonnet and rested the device on it, the pod on the left rest upon the full sized pod bonnet that is included in the kit. I would advise you to lift the bonnet up to view juice levels because with the bonnet on it cast to much of a shadow to clearly see the juice.
As you can see with the bonnet on even the full sized PNP pod makes the device and pod look like a 1 piece unit, Both the MTL and full size PNP pods are very tough and durable and will be even stronger wearing protective bonnets. The full size pod fits like a glove while not looking out of place because of it's size difference to the MTL pod. The 5 airflow holes are adjusted by either opening or closing 1 hole at a time, having all 5 holes open gives a loose MTL draw and by reducing the amount of holes open restricts it. Completely closed showing no open holes you get a cigarette like draw, my preference is 1 hole open.
The seal is a very small device and because of it's size the bottom of the device was probably the only spot on the device that Voopoo was able to place the type-c charge port, the cover is easily opened because of the small indent on the side.
The Seal's functioning buttons are pretty straight forward with the fire/power button at the top with a line drawn through it, below it is the display screen followed by the up/down buttons at the bottom. Even though the display screen window is very small I can stick read everything on the screen easily and that was a surprise because my eyesight isn't the best.
At the top of the screen is your battery bar, below it is the wattage selected and below that are your draw or inhale selection. If you choose the letter A your inhale selection will be auto draw, if you choose the letter P you will be using the fire/power button to fire the coil. Below your selection of firing the coil is the coils ohm reading followed by the puff counter.
With the Seal having no menu and just a couple of button combinations it's really simple and easy to operate and in my opinion a nice starter kit for anyone that has quit smoking.
* On/off - 5 presses of the fire/power button
* Locking the entire device is done by hold the fire/power button and up button down simultaneously
* Changing draw modes is done with 3 presses of the fire/power button
* Clearing the puff counter is done by holding the fire/power button and down button simultaneously
FINAL IMPRESSIONS
Coils provided work very nicely for MTL with the 0.8Ω mesh giving a very saturated flavorful vape, you won't be clouding up a room but it's not intended to do so. The vape at 16 watts is a semi warm one and because the flavor at that wattage hit my sweet spot I saw no need to run the Seal any higher which also saves battery life. I am able to make it through almost a full work day on one charge.
The 1.2Ω coils doesn't have as much flavor as the 0.8 mainly because it's a straight wire vertical coil and not mesh but it's still a satisfying vape with the ability to make it through a full work day and then some on 1 charge.
The silicone rubber covering the device really gives it a protective bumper and having a color matching pod bonnet of the same material makes the device appear as a single unit. I thought I would have a problem with it sticking to my pocket but it does not, slipping it in and out of a pocket is no problem.
The fully adjustable airflow works very well for a MTL application giving a loose MTL vape with all 5 airflow holes open and a very cigarette type of inhale with all holes completely closed, there is still some airflow fully closed so you should be able to find a sweet spot somewhere in this range.
Ergonomics are good and it almost disappears in the hand leaving just the tip of the mouthpiece showing, and speaking on the mouthpiece I found it to be comfortable to use and liked the height of it as well as the bore size.
Having the ability to use the full size PNP Pod on the Seal is a nice bonus that gives more options on how the Seal can be used. Providing a extra bonnet for the full sized PNP Pod was a nice touch, having the bonnet on really pulls everything together.
If you inhale very strong and deep the auto draw feature should work for you but I don't inhale very deeply and found the auto draw feature didn't function well for me, I'm a button presser anyway so I rarely use auto draw.
Having the charge port on the bottom of the device means you will be pulling the cover to it off when charging time arrives, replacing the cover be sure to fully seat it back into place or the Seal will wobble a bit standing up. If you lay the Seal down the airflow selector lever protrudes just enough to prevent it from rolling off the surface it's on.
All in all I think Voopoo did a nice job with designing the Seal and think it's a good started kit for someone just quitting smoking and wanting to get into vaping.
I would like to thank Aimer and Voopoo for providing the Seal for review and I hope this review has helped anyone looking to purchase the Seal.
THANK YOU
BIGBOB2322
-
Locked
Uwell Aeglos H2 - Stylish New Look And More?
New member today for Uwell Aeglos series. It's Aeglos H2, based on AEGLOS and AEGLOS P1, any new improvement this time?
First, you will get a brand new look which is more stylish.
Main Features:
1. Translucent bottom-filling cartridge, you can rotate the cartridge to adjust the airflow
2. Compatible with Aeglos H2 Coil 0.18/1.2Ω and Aeglos & Aeglos P1 Coils
3. Self-cleaning Tech to collect condensation and evaporate with the involvement of aerodynamics
4. 1500mAh built-in battery, output power 5-60W, with 0.96'' OLED screen
5. Light aluminum alloy material & ergonomics design, compact and concise
Size: 27.5 x 27 x 113mm
Capacity: 4.5ml/2ml(TPD/UK)
Resistance: 0.18Ω
Color: Dusky Silver, Ruby Red, Emerald Green, Classic Black, Dove Blue
Learn More: (login first to check better wholesale price)
Uwell Aeglos H2
Elego provides the most competitive wholesale price for all the vape devices, login to check more latest vape kits with better price!
For any questions about Uwell wholesale or any vape wholesale in China, feel free to contact us.
First, you will get a brand new look which is more stylish.
Main Features:
1. Translucent bottom-filling cartridge, you can rotate the cartridge to adjust the airflow
2. Compatible with Aeglos H2 Coil 0.18/1.2Ω and Aeglos & Aeglos P1 Coils
3. Self-cleaning Tech to collect condensation and evaporate with the involvement of aerodynamics
4. 1500mAh built-in battery, output power 5-60W, with 0.96'' OLED screen
5. Light aluminum alloy material & ergonomics design, compact and concise
Size: 27.5 x 27 x 113mm
Capacity: 4.5ml/2ml(TPD/UK)
Resistance: 0.18Ω
Color: Dusky Silver, Ruby Red, Emerald Green, Classic Black, Dove Blue
Learn More: (login first to check better wholesale price)
Uwell Aeglos H2
Elego provides the most competitive wholesale price for all the vape devices, login to check more latest vape kits with better price!
For any questions about Uwell wholesale or any vape wholesale in China, feel free to contact us.
-
Locked
Flash Sale & Happy International Friendship day from Innokin!
- Innokin Technology
- 3 Replies
What’s up ECF,
It is the International friendship today, Happy International Friendship Day to you all!
A friend is one of the best things you can be and the greatest things you can have.
We hope you and your friends have a wonderful day and don’t forget to tell them how much you appreciate them!
Not sure what kind of gift to get your friend?
InnokinStore is here to help! A Better Vape Experience | Innokin Store
Use promo code: FRIENDSHIP20 for 20% off on your purchase.
Available till August 1st, 2021.
Thank you for always support and encourage us.
Best Regards,
Innokin Team
It is the International friendship today, Happy International Friendship Day to you all!
A friend is one of the best things you can be and the greatest things you can have.
We hope you and your friends have a wonderful day and don’t forget to tell them how much you appreciate them!
Not sure what kind of gift to get your friend?InnokinStore is here to help! A Better Vape Experience | Innokin Store
Use promo code: FRIENDSHIP20 for 20% off on your purchase.
Available till August 1st, 2021.
Thank you for always support and encourage us.
Best Regards,
Innokin Team
-
Locked
Aspire Nautilus Mesh Coil for Nautilus/BOXX
- By Ema
- Sourcemore
- 0 Replies
Nautilus Mesh Coil is designed for all Nautilus series products and BOXX Pod. It features 0.3ohm resistance with 23W-28W wattage range. 5pcs each pack.
Parameters:
Resistance 0.3ohm
Wattage 23-28W
Fit for Nautilus series product, BOXX Pod
Quantity 5psc/pack
Parameters:
Resistance 0.3ohm
Wattage 23-28W
Fit for Nautilus series product, BOXX Pod
Quantity 5psc/pack
-
Locked
Closed/Sold REO Grand P67 Tumbled Raw Mod
- By Jet Knight
- Member Classifieds and Swaps
- 5 Replies
For Sale: REO Grand P67 Tumbled Raw Mod
Price: $90
Condition: Very Good
Payment: PayPal or Check
Shipped when payment received or check clears.
Shipping included and will only ship to Continental USA only.
Thank you for viewing.
Price: $90
Condition: Very Good
Payment: PayPal or Check
Shipped when payment received or check clears.
Shipping included and will only ship to Continental USA only.
Thank you for viewing.
-
Locked
Closed/Sold Dovpo Topside 90w Squonk Box Mod (2)
- By Jet Knight
- Member Classifieds and Swaps
- 7 Replies
For Sale: DOVPO Topside 90W Squonk Box Mod (Original) Black & Gunmetal
Price: $50/each, Both for $90
Condition: Good, and with all original box, hardware and extra bottle
Payment: PayPal or Check
Shipped when payment received or check clears.
Shipping included and will only ship to Continental USA only.
Thank you for viewing.
Price: $50/each, Both for $90
Condition: Good, and with all original box, hardware and extra bottle
Payment: PayPal or Check
Shipped when payment received or check clears.
Shipping included and will only ship to Continental USA only.
Thank you for viewing.
-
Locked
Curdo ODIN MINI Kit 30W Is Best For You
- VapesourcingUK
- 0 Replies
Today, introducing you to a kit that perfectly combines the art of ergonomics and the culture of simplicity, the Curdo Odin Mini uk is an exquisite portable pod system starter kit with a pen style that gives you a unique emotional visual experience.
Consisted of 650mAh built-in battery and 2.0ml refillable pod with 1.0ohm meshed coil, the Curdo Odin Mini Cartridge is fit for both regular e-juice and nic-salt e-juice with excellent flavor.
The Curdo Odin Mini pod kit uk for sale online adopts 1W to 30W adjustable wattage for precise vaping experience.
The Curdo Odin Mini Pod also features a side e-juice refill system and transparent window to make you check the e-juice easily.
If you're intersted in Odin Mini,you could click best online vape shop uk.
SPECIFICATION
Size:130.8mm*18mm*18mm
Weight:45g
Output Wattage:1-30W
Battery Capacity:650mAh
Standby Curent:<40uA
Input Voltage:3.3V-4.2V
Cartridge Capacity:2ml
Filling:Side Filling
Resistance:1.0ohm Mesh
Colors:Green, Black, Silvery
Quick Link:Curdo ODIN MINI Kit 30W 650mAh 2ml
Consisted of 650mAh built-in battery and 2.0ml refillable pod with 1.0ohm meshed coil, the Curdo Odin Mini Cartridge is fit for both regular e-juice and nic-salt e-juice with excellent flavor.
The Curdo Odin Mini pod kit uk for sale online adopts 1W to 30W adjustable wattage for precise vaping experience.
The Curdo Odin Mini Pod also features a side e-juice refill system and transparent window to make you check the e-juice easily.
If you're intersted in Odin Mini,you could click best online vape shop uk.
SPECIFICATION
Size:130.8mm*18mm*18mm
Weight:45g
Output Wattage:1-30W
Battery Capacity:650mAh
Standby Curent:<40uA
Input Voltage:3.3V-4.2V
Cartridge Capacity:2ml
Filling:Side Filling
Resistance:1.0ohm Mesh
Colors:Green, Black, Silvery
Quick Link:Curdo ODIN MINI Kit 30W 650mAh 2ml
-
Locked
DIGIFLAVOR SIREN V4 MTL RTA - Review
- By Tim Wiseman
- Atomizer Reviews
- 0 Replies
Hi ECF members, In this review i take a look at the Siren V4 MTL RTA from Digiflavor. The Digiflavor Siren V4 MTL RTA was supplied for the purpose of this review by Allison from Geekvape.
S MTL RTA V4 - Digiflavor
Introduction
Geekvape's sister brand Digiflavor have a few favourite series in their camp but maybe the one which is held in the highest regard especially amongst MTL vapers is the Siren with the Siren V2 22mm version still regarded as one of the very best MTL RTA's ever to be released. There was a long wait for V3 and if that was a little disappointing to some it's been swiftly followed by the V4 which see's a radical makeover and semi-hidden bottom airflow design. The V4 comes with 2 different drip tips including the Siren style and 4 different coils, let's check out the Siren V4 from Digiflavor!
_________________________________________________________________________
In The Box
Contents:
1* Siren MTL RTA V4
4* Feather Cotton
1* 510 Drip Tip
4* DIY MTL Coil
1* Spare Parts Pack
1* Tri Tool
1* Manual
_________________________________________________________________________
Aesthetics
The Siren V4 came in sample packaging that consisted of a Red cardboard box with outer White cardboard sleeve, we have the "Digiflavor" logo front and contents etc on the reverse! I received the Gunmetal version, the options are Gunmetal, Rainbow, SS or Black.
The Siren V4 is a very short 22mm MTL RTA with just a narrow PEI viewing tube which is frosted on the Gunmetal and Rainbow versions but Ultem style on the Silver and Black versions! The top cap steps in and has fine aggressive knurling, we then have a very long narrow drip tip. On the main sleeve we have the "Digiflavor" logo printed on the front which looks ok in my opinion but may not be to everyone's liking. On the base section below the frosted tube and on the airflow control ring we have the same fine aggressive knurling to match the top-cap. Between the two we have an indented section which includes airflow markings and a Red dot on the AFC which can be lined up against those markings!
Moving to the base we have a Gold plated Brass pin that protrudes and printed branding and safety markings. It's a noticeably small and short RTA and in my opinion quite a looker!
_________________________________________________________________________
Siren V4 MTL RTA Specs and Features:
Dimensions: 22 x 28.5mm
Capacity: 2ml
Stainless Steel
PEI Narrow Tube
Thread: 510
Filling: Top fill
Included Coil: Braided Coil(0.65Ω); MTL Fused Clapton(1.0Ω); MTL Fused Clapton(1.2Ω); MTL Clapton(1.4Ω)
GTA design deck, easy to build and trim
Semi-hidden AFC structure, precise airflow
4 Different kinds of MTL coils
Colour: Gunmetal, Rainbow, SS, Black
_________________________________________________________________________
What You Receive?
As well as the Siren V4 MTL RTA with pre-installed long narrow 510 drip tip you also receive what i would describe as a Siren style shorter (but still quite long) alternative. I would imagine it's more to do with mine being a sample but the alternative drip tip didn't have the O-rings fitted so was loose but were in the bag of O-rings and spare grub screws so needed installing.
So that's the spares bag mentioned so on to the two packets of cotton and coils! One packet has 2 different 2.0ID coils which are a MTL fused clapton (1.2ohm) and a MTL Clapton (1.4ohm), you also receive 2 shoelace cotton pieces. The second packet consists of two 2.5ID coils which are a Braided Coil (0.65ohm) and a MTL fused clapton (1.0ohm), again you receive a further 2 shoelace cotton pieces, finally you receive paperwork!
_________________________________________________________________________
It's Various Parts!
Up top we have fine aggressive knurling on the top cap which sounds a little squeaky when unscrewing and securing but actually feels very smooth! We have a narrow, very long drip tip pre-installed which can be swapped for the Siren style drip tip which in my opinion despite the V4 having a complete aesthetic overhaul and being much shorter still becomes visually a Siren in appearance with this drip tip installed, I like both!
The next section is all one piece which includes fill plate with two fill ports, outer sleeve, chamber and narrow PEI tube, you don't get a spare PEI tube but maybe that's because it can't be removed, at least i can't find a way of separating it from the sleeve which if is the case must be a con because if it cracks the whole top section needs replacing!
The deck section has a 2 post GTA style deck with shower head airflow holes underneath where the coil will sit. We have an AFC which can be removed which has a Red dot for lining up with the airflow markings!
_________________________________________________________________________
Filling
The Siren V4 has a 2ml capacity and top-fill design. As mentioned even if it doesn't sound it the threading is nice and smooth and removing the top-cap reveals the fill plate to be indented allowing any spill to find it's way into one of the fill ports which are not huge but big enough for most nozzles.
_________________________________________________________________________
The Airflow!
The main talking point is the airflow which consists of a semi-hidden design! When removing the airflow ring you can see notches which means everything will be lined up correctly when installed and an indented rail that adjusts against five 0.6mm airflow holes on the base section.
When the ring is installed the airflow holes are completely hidden and you adjust the Red dot on the AFC against markings on the base, essentially the higher on the scale the Red dot is positioned the more of the airflow holes (or partial holes) are exposed to the indented rail which opens the airflow! You can have just one 0.6mm partially open right up to all five 0.6mm airflow holes fully open!
_________________________________________________________________________
The Deck and Build!
The Siren V4 has a GTA style deck with 2 post design, side terminal openings and Gold plated flathead screws! The wicking channels despite being a GTA style deck have floors rather than being open bottomed, those floors have 3 wicking holes in each!
Your coil leads slide into the terminals from the side where we can see the openings are curved upwards acting the same as lips in regard stopping your leads popping out while fixing in position. Use a coiling rod to place the coil in position and fix each lead one at a time holding the lead in position while tightening down from above especially if using thin wire as there is a gap between the bottom of the screw which acts as your clamp and the inside edge of the terminal! Once your leads are fastened in place use the coiling rod or fit for purpose tool to manoeuvre into the ideal position, then snip your access leads (there is plenty of room), give your coil a few low wattage pulses and strum out any hotspots!
Wicking is a doddle (in fact it's a very easy build) and is helped with those floors to the wicking channels telling you that your ends need cutting short, simply fluff up and place into the channels! Then you can prime your build and give it a few pulses to admire your work before screwing the tank together and filling!
_________________________________________________________________________
How It Vapes And Thoughts!
I love this MTL RTA which is strange because the amount of cons i found leaves me scratching my head to why i like it so much, maybe i am just shallow and find to me what is it's stunning looks is ruling my head but there is far more to it than that which i will come to.
So what about those cons, well nearly all are to do with viewing the e-liquid whether that's while in use or while filling! The very narrow frosted PEI tube only allows the level to be seen when the tank is almost empty and even then only in good light, yes in decent light you can tilt and get some idea but i want to be able to just glance at a tank to see the level which isn't possible with the Siren V4! Again having mostly a metal sleeve with just the lower narrow tube means when filling you have to use the fill port you are not using to fill to judge the level which again needs good light and is far from ideal and will probably cause many to slightly underfill turning a low capacity 2ml RTA realistically into about 1.5ml to 1.75ml! Then we have the PEI tube which doesn't seem to detach from the main sleeve which is a big con for me and if it's just tight and actually does undo still a con that i would be worrying about using force to remove it. My other con is although the tolerance on the AFC is spot on it won't turn while on the device so if I want to adjust airflow during use i need to first remove it from the device which is annoying!
So why do I like it so much other than it's good looks? Well firstly it's that semi-hidden airflow design which is so well thought out and allows the precision of the airflow setting to be as precise as with atomizers that come with inserts that need fitting. Next is smoothness which is something that is very important to me, the acoustics of the tank allows for the crackle of the coil to be easily heard but to a background of silence as this gives such a silky smooth and silent draw. Next is it's credentials as a true MTL RTA with airflow going from extremely tight up to a loose MTL but not over loose so you would need this fully open and to use a wider bore drip tip to have any chance of a RDL draw! The build and wicking is straightforward and I have had zero leaking which surprised me along with just how tight this will go bearing in mind we have a showerhead airflow outlet under the coil which usually does restrict just how tight the draw can go and also can be prone to leaking, so both surprised and very happy!
I also like both drip tips and that you get 4 different coils plus 4 shoelace cotton pieces and then we come to flavour which is as good as with my other very best MTL RTA's like the Bishop and Glaz Mini, this has particularly been excelling with Bakeries, Desserts and Fruits!
So to sum up, despite being aesthetically so different, much shorter and with a different airflow design we have a Siren which is a worthy successor to the Siren V2 22mm MTL RTA, it's been a long wait!
_________________________________________________________________________
Likes
Stunning and cute looking (in my opinion)
22mm and short (usually is a recipe for flavour in my experience)
4 Colour options
Semi-hidden airflow design
Precise airflow adjustment
True MTL RTA, extremely tight to loose MTL
Smooth top cap threading
Easy build and wicking
Super smooth draw
Quiet apart from crackle of coil
Excellent flavour
Zero leaking or flooding
Wicked like a dream
Includes 2 narrow drip tips (like both)
Includes 4 different coils and shoelace cotton
Cons
Can't detach PEI tube from main sleeve
Difficult to see juice level during use
Difficult to see juice level when filling
The above can mean under filling what is a low capacity tank anyway (2ml)
Can't adjust airflow ring with the tank on a device
I would once again like to thank Allison from Geekvape for supplying the Digiflavor Siren V4 MTL RTA for the purpose of this review, thanks for reading and stay safe!
S MTL RTA V4 - Digiflavor
_________________________________________________________________________
S MTL RTA V4 - Digiflavor
Introduction
Geekvape's sister brand Digiflavor have a few favourite series in their camp but maybe the one which is held in the highest regard especially amongst MTL vapers is the Siren with the Siren V2 22mm version still regarded as one of the very best MTL RTA's ever to be released. There was a long wait for V3 and if that was a little disappointing to some it's been swiftly followed by the V4 which see's a radical makeover and semi-hidden bottom airflow design. The V4 comes with 2 different drip tips including the Siren style and 4 different coils, let's check out the Siren V4 from Digiflavor!
_________________________________________________________________________
In The Box
Contents:
1* Siren MTL RTA V4
4* Feather Cotton
1* 510 Drip Tip
4* DIY MTL Coil
1* Spare Parts Pack
1* Tri Tool
1* Manual
_________________________________________________________________________
Aesthetics
The Siren V4 came in sample packaging that consisted of a Red cardboard box with outer White cardboard sleeve, we have the "Digiflavor" logo front and contents etc on the reverse! I received the Gunmetal version, the options are Gunmetal, Rainbow, SS or Black.
The Siren V4 is a very short 22mm MTL RTA with just a narrow PEI viewing tube which is frosted on the Gunmetal and Rainbow versions but Ultem style on the Silver and Black versions! The top cap steps in and has fine aggressive knurling, we then have a very long narrow drip tip. On the main sleeve we have the "Digiflavor" logo printed on the front which looks ok in my opinion but may not be to everyone's liking. On the base section below the frosted tube and on the airflow control ring we have the same fine aggressive knurling to match the top-cap. Between the two we have an indented section which includes airflow markings and a Red dot on the AFC which can be lined up against those markings!
Moving to the base we have a Gold plated Brass pin that protrudes and printed branding and safety markings. It's a noticeably small and short RTA and in my opinion quite a looker!
_________________________________________________________________________
Siren V4 MTL RTA Specs and Features:
Dimensions: 22 x 28.5mm
Capacity: 2ml
Stainless Steel
PEI Narrow Tube
Thread: 510
Filling: Top fill
Included Coil: Braided Coil(0.65Ω); MTL Fused Clapton(1.0Ω); MTL Fused Clapton(1.2Ω); MTL Clapton(1.4Ω)
GTA design deck, easy to build and trim
Semi-hidden AFC structure, precise airflow
4 Different kinds of MTL coils
Colour: Gunmetal, Rainbow, SS, Black
_________________________________________________________________________
What You Receive?
As well as the Siren V4 MTL RTA with pre-installed long narrow 510 drip tip you also receive what i would describe as a Siren style shorter (but still quite long) alternative. I would imagine it's more to do with mine being a sample but the alternative drip tip didn't have the O-rings fitted so was loose but were in the bag of O-rings and spare grub screws so needed installing.
So that's the spares bag mentioned so on to the two packets of cotton and coils! One packet has 2 different 2.0ID coils which are a MTL fused clapton (1.2ohm) and a MTL Clapton (1.4ohm), you also receive 2 shoelace cotton pieces. The second packet consists of two 2.5ID coils which are a Braided Coil (0.65ohm) and a MTL fused clapton (1.0ohm), again you receive a further 2 shoelace cotton pieces, finally you receive paperwork!
_________________________________________________________________________
It's Various Parts!
Up top we have fine aggressive knurling on the top cap which sounds a little squeaky when unscrewing and securing but actually feels very smooth! We have a narrow, very long drip tip pre-installed which can be swapped for the Siren style drip tip which in my opinion despite the V4 having a complete aesthetic overhaul and being much shorter still becomes visually a Siren in appearance with this drip tip installed, I like both!
The next section is all one piece which includes fill plate with two fill ports, outer sleeve, chamber and narrow PEI tube, you don't get a spare PEI tube but maybe that's because it can't be removed, at least i can't find a way of separating it from the sleeve which if is the case must be a con because if it cracks the whole top section needs replacing!
The deck section has a 2 post GTA style deck with shower head airflow holes underneath where the coil will sit. We have an AFC which can be removed which has a Red dot for lining up with the airflow markings!
_________________________________________________________________________
Filling
The Siren V4 has a 2ml capacity and top-fill design. As mentioned even if it doesn't sound it the threading is nice and smooth and removing the top-cap reveals the fill plate to be indented allowing any spill to find it's way into one of the fill ports which are not huge but big enough for most nozzles.
_________________________________________________________________________
The Airflow!
The main talking point is the airflow which consists of a semi-hidden design! When removing the airflow ring you can see notches which means everything will be lined up correctly when installed and an indented rail that adjusts against five 0.6mm airflow holes on the base section.
When the ring is installed the airflow holes are completely hidden and you adjust the Red dot on the AFC against markings on the base, essentially the higher on the scale the Red dot is positioned the more of the airflow holes (or partial holes) are exposed to the indented rail which opens the airflow! You can have just one 0.6mm partially open right up to all five 0.6mm airflow holes fully open!
_________________________________________________________________________
The Deck and Build!
The Siren V4 has a GTA style deck with 2 post design, side terminal openings and Gold plated flathead screws! The wicking channels despite being a GTA style deck have floors rather than being open bottomed, those floors have 3 wicking holes in each!
Your coil leads slide into the terminals from the side where we can see the openings are curved upwards acting the same as lips in regard stopping your leads popping out while fixing in position. Use a coiling rod to place the coil in position and fix each lead one at a time holding the lead in position while tightening down from above especially if using thin wire as there is a gap between the bottom of the screw which acts as your clamp and the inside edge of the terminal! Once your leads are fastened in place use the coiling rod or fit for purpose tool to manoeuvre into the ideal position, then snip your access leads (there is plenty of room), give your coil a few low wattage pulses and strum out any hotspots!
Wicking is a doddle (in fact it's a very easy build) and is helped with those floors to the wicking channels telling you that your ends need cutting short, simply fluff up and place into the channels! Then you can prime your build and give it a few pulses to admire your work before screwing the tank together and filling!
_________________________________________________________________________
How It Vapes And Thoughts!
I love this MTL RTA which is strange because the amount of cons i found leaves me scratching my head to why i like it so much, maybe i am just shallow and find to me what is it's stunning looks is ruling my head but there is far more to it than that which i will come to.
So what about those cons, well nearly all are to do with viewing the e-liquid whether that's while in use or while filling! The very narrow frosted PEI tube only allows the level to be seen when the tank is almost empty and even then only in good light, yes in decent light you can tilt and get some idea but i want to be able to just glance at a tank to see the level which isn't possible with the Siren V4! Again having mostly a metal sleeve with just the lower narrow tube means when filling you have to use the fill port you are not using to fill to judge the level which again needs good light and is far from ideal and will probably cause many to slightly underfill turning a low capacity 2ml RTA realistically into about 1.5ml to 1.75ml! Then we have the PEI tube which doesn't seem to detach from the main sleeve which is a big con for me and if it's just tight and actually does undo still a con that i would be worrying about using force to remove it. My other con is although the tolerance on the AFC is spot on it won't turn while on the device so if I want to adjust airflow during use i need to first remove it from the device which is annoying!
So why do I like it so much other than it's good looks? Well firstly it's that semi-hidden airflow design which is so well thought out and allows the precision of the airflow setting to be as precise as with atomizers that come with inserts that need fitting. Next is smoothness which is something that is very important to me, the acoustics of the tank allows for the crackle of the coil to be easily heard but to a background of silence as this gives such a silky smooth and silent draw. Next is it's credentials as a true MTL RTA with airflow going from extremely tight up to a loose MTL but not over loose so you would need this fully open and to use a wider bore drip tip to have any chance of a RDL draw! The build and wicking is straightforward and I have had zero leaking which surprised me along with just how tight this will go bearing in mind we have a showerhead airflow outlet under the coil which usually does restrict just how tight the draw can go and also can be prone to leaking, so both surprised and very happy!
I also like both drip tips and that you get 4 different coils plus 4 shoelace cotton pieces and then we come to flavour which is as good as with my other very best MTL RTA's like the Bishop and Glaz Mini, this has particularly been excelling with Bakeries, Desserts and Fruits!
So to sum up, despite being aesthetically so different, much shorter and with a different airflow design we have a Siren which is a worthy successor to the Siren V2 22mm MTL RTA, it's been a long wait!
_________________________________________________________________________
Likes
Stunning and cute looking (in my opinion)
22mm and short (usually is a recipe for flavour in my experience)
4 Colour options
Semi-hidden airflow design
Precise airflow adjustment
True MTL RTA, extremely tight to loose MTL
Smooth top cap threading
Easy build and wicking
Super smooth draw
Quiet apart from crackle of coil
Excellent flavour
Zero leaking or flooding
Wicked like a dream
Includes 2 narrow drip tips (like both)
Includes 4 different coils and shoelace cotton
Cons
Can't detach PEI tube from main sleeve
Difficult to see juice level during use
Difficult to see juice level when filling
The above can mean under filling what is a low capacity tank anyway (2ml)
Can't adjust airflow ring with the tank on a device
I would once again like to thank Allison from Geekvape for supplying the Digiflavor Siren V4 MTL RTA for the purpose of this review, thanks for reading and stay safe!
S MTL RTA V4 - Digiflavor
_________________________________________________________________________
-
Locked
Closed/Sold Lost Vape Therion BF DNA75 (2)
- By Jet Knight
- Member Classifieds and Swaps
- 5 Replies
For Sale 2 Lost Vape Therion BF with Evolv DNA 75 chipset
Includes all original hardware and Delirium RBA.
Price: $40/each Both for $75
Condition: Good
Payment: PayPal or Check
Shipped when payment received or check clears.
Shipping included and will only ship to Continental USA only.
Thank you for viewing.
Includes all original hardware and Delirium RBA.
Price: $40/each Both for $75
Condition: Good
Payment: PayPal or Check
Shipped when payment received or check clears.
Shipping included and will only ship to Continental USA only.
Thank you for viewing.
-
Locked
ZENITH D22 TANK BY INNOKIN & coils if ya got em
- By oplholik
- Member Classifieds and Swaps
- 2 Replies
-
Locked
Closed/Sold TRADE: Half Moon Mods All Hallows V2 SQNKR squonk mod
- By inswva
- Member Classifieds and Swaps
- 1 Replies
Looking to trade my HMM SQNKR for another mech squonk. I really enjoy the mod but I am in "one mod in, one mod out" mode. So, rather than buy another mod outright, it is trading time.
Mod is in good, used condition as evidenced by the pics. I'm not going to rate it on the 1-10 scale simply because I've received gear stated as 9/10 which was more like 6/10. Anyway, I'll let the pics represent the condition (click on images for high res versions). Mod takes a 18650 or 20650 battery. I will include a nearly new Samsung HG6 20650 30A battery (less than 5 charge cycles). Mod has silver plated contacts and uses a Varitube BF 510.
Mod has been freshly disassembled and thoroughly cleaned.
RRP is $179.99 from HMM (none available currently). The bottle I was using in the mod is pretty gnarly so I'll let you supply the bottle. HMM does sell bottles and extra doors. Hardware - Half Moon Mods LLC
Trades only for now. Cash can go either way to even a deal, if necessary. I may consider a cash sale if no viable trades are presented.Let me know what you have. I'd also consider trades/partial trades for high end squonk attys.
Pics: (I discovered pics hosted on imgur don't show up in Tapatalk when browsing ECF). If you can't see the images or links, please let me know and I can provide detailed pics via email.
Mod is in good, used condition as evidenced by the pics. I'm not going to rate it on the 1-10 scale simply because I've received gear stated as 9/10 which was more like 6/10. Anyway, I'll let the pics represent the condition (click on images for high res versions). Mod takes a 18650 or 20650 battery. I will include a nearly new Samsung HG6 20650 30A battery (less than 5 charge cycles). Mod has silver plated contacts and uses a Varitube BF 510.
Mod has been freshly disassembled and thoroughly cleaned.
RRP is $179.99 from HMM (none available currently). The bottle I was using in the mod is pretty gnarly so I'll let you supply the bottle. HMM does sell bottles and extra doors. Hardware - Half Moon Mods LLC
Trades only for now. Cash can go either way to even a deal, if necessary. I may consider a cash sale if no viable trades are presented.Let me know what you have. I'd also consider trades/partial trades for high end squonk attys.
Pics: (I discovered pics hosted on imgur don't show up in Tapatalk when browsing ECF). If you can't see the images or links, please let me know and I can provide detailed pics via email.
-
Locked
Blitz CIO RDA 25mm Postless for Dual Coil
First-class dripping atomizer imagined with great care by the thinking heads of Blitz , the CIO RDA impresses with its outfit and its divinely crafted finishes.
Available in two colors, the Blitz CIO RDA comes in black and silver.
Blitz CIO RDA is a 25 mm double-coil RDA with a stand-free base, a spacious reservoir and a set of interchangeable air grids. a Dual Coil plate and a Pin Bottom Feeder . In addition, it participates in a very nice restitution of the flavors of your e-liquids and a very well thought out airflow. It is also distinguished by its ability to produce dense vapor and by the consequent depth of its tank.
Features
510 threading connection
Post-less deck
Deep tank for good cotton storage
Dual coil configuration
Standard 810 resin drip tip
Pre-installed airflow insert
Interchangeable airflow design
Can be used without any airflow inserts for fully open airflow
Diameter: 25mm
View more details of this CIO 25mm here >> https://www.3fvape.com/51136-blitz-cio-rda-25mm.html
[/align]
-
Locked
Think Vape Craton DNA 75C Box Mod Compact & Light Weight Aluminum Alloy
Think Vape Craton DNA 75C Box Mod, constructed of Aluminum Alloy & SS, is powered by ingle 21700(20700)/18650 battery and can fire up to 75W output.
Thinkvape Craton DNA 75C mod features DNA 75C Evolv chip and supports multi modes: VW/ Kanthal/ Nichrome/ Ni Fethal 30/ SS430/ SS316/ Titomium/ Nickel 200 to meet different needs.
The ThinkVape Think Vape Craton DNA 75C's 510 deck is with 26mm diameter, perfect match for most of vape atomizers.
Features:
510 threading connection
510 deck diameter: 26 mm
Material: Aluminum Alloy & SS
Battery: single 21700 / 20700 / 18650 battery (not included)
Output Wattage: 1~75W
Mode: VW / Kanthal / Nichrome / Ni Fethal 30 / SS430 / SS316 / Titomium / Nickel 200
Temperature Range: 200~600'F / 100~300'C
Adjustable wattage of 1~75W
DNA 75C Evolv chip
Top battery cap
More details for DNA75C CRATON, check >> https://www.3fvape.com/51134-hinkvape-craton-dna-75c.html
-
Locked
Overview of All SMOK Nord Series | Preview
- Everzon
- 0 Replies
SMOK Nord Series is one of the most successful SMOK product line. Never stop exploring life and creating wonders. Innovation keeps changing the vaping experience. Let`s check out the upgrading of the 5 products in the SMOK Nord series: SMOK Nord 15W – SMOK Nord 2 40W – SMOK Nord X 60W – SMOK Nord 4 80W - SMOK Nord 50W .
SMOK Nord 15W is a button-triggered pod system device. It has 1100mAh battery capacity, extremely large among pod system devices, making it a definitely powerful one! It is equipped with two exclusive coils, Nord Mesh 0.6Ω coil and Nord regular 1.4Ω coil, one is perfect to get massive vapor; the other can offer excellent MTL experience. It also has a perfect size for you to hold in hand, there's an e-liquid window on the pod, all of which are for your convenience!
SMOK Nord 2 40W ,the upgrade version of the button-triggered pod system nord, has been fully improved. Based on nord's exceptional features, the nord 2 adds more highlights: 0.69inch OLED screen, increased capacity to 1500mAh, charging display interface, adjustable wattage, and multiple protection. It's equipped with a nord 2 RPM pod and a nord 2 nord pod to offer more pod and coil options. Nord 2 is a new innovator.
SMOK Nord X 60W has given new meanings to the entire collection. It's a tri-proof pod system featuring a built-in 1500mAh battery that can provide up to 60 watts of power. The two matching pods are equipped with RPM 2 Mesh 0.16Ω coil and RPM Mesh 0.4Ω coil, which can hold 6ml of e-liquid to ensure long-lasting vaping and reduce frequent filling.
SMOK Nord 4 80W is an emblematic pod system kit with versatile capabilities, which can give full play to the performance and advantages of the entire device. It has a built-in 2000mAh battery, enough to provide a maximum power of 80 watts. The kit comes with two 4.5ml nord 4 pods, one with an RPM 2 mesh coil and the other with an RPM mesh coil. Besides, two air-inlet rings are cleverly designed on the top of the device for free adjustment of air intake.
SMOK Nord 50Wsets new standards for the nord series with an internal 1800mAh battery bringing you up to 50W of power to your satisfaction. The kit includes two versatile pods that work perfectly with the upgraded airflow system to deliver scrumptious flavor and massive vapor: one is the nord pod compatible with nord coil series, and the other is the LP2 pod compatible with LP2 coil series with enhanced leak-proof technology. Based on the classic appearance, the nord 50W advances into two collections featuring a variety of colors and premium textures to match your mood of the day.
Which one catches your eyes? Share us your opinions on the SMOK Nord Series in comments down below.
Blog:Overview of All SMOK Nord Series | Preview
-
Locked
Review: Uwell Aeglos H2 Pod Mod Kit 5-60W 1500mah
- Everzon
- 0 Replies
Uwell Aeglos H2 Pod Mod Kit is equipped with a 1500 mAh large-capacity rechargeable battery and the output power can reach 60W. Type C Fast Charging, one hour per day, no worries all day.
Rotate to adjust airflow,easy and convenient. Get the airflow you want just between your fingers.
Aeglos H2 is not only compatible with Uwell Aeglos P1 Coils but also Uwell Aeglos H2 Coils. Compatible Aeglos H2 Coils bring you full fange of flavours. UN2 Meshed-H 0.18 ohm DTL(direct to lung) brings your rich and moisture flavour. UN2 Meshed-H 1.2 ohm RDL+MTL (restricted direct to lung, mouth to lung) brings you dry and comfortable flavour. UN2 Meshed-H Coils with Uwell's PRO-FOCS Technology for absolute top taste and thick clouds.
This feature of Self cleaning tech is very friendly, Clean hand, clean pocket, clean bag, no more mess, condensation-collecting in time.
Uwell Aeglos H2 is equipped with 0.96 inch screen,definitely clear about what's happening, not only display puff counter, but also wattage and volt.
It's too light to notice it, yet a necessity for a vaper to carry around. Safely and quietly stay in your hand. There are 5 colors for your choice,please don't miss this perfect Pod Mod Kit!
Quick Links:
Uwell Aeglos H2 Replacement Pod
Uwell Aeglos H2 Replacement Coils (4pcs/pack)
-
Locked
Uwell Aeglos H2 Pod Mod Kit | Suorin Trident Kit
- By Ema
- Sourcemore
- 1 Replies
Uwell Aeglos H2 Pod Mod Kit
Aeglos H2 Kit is a portable pod mod kit. It has 1500mAh built-in battery capacity with type-c fast charging, and the wattage range is 5W-60W. You can rotate it to adjust airflow you want between your fingers. Aeglos H2 Kit comes with meshed 0.18ohm coil for DTL vaping, meshed 0.2ohm coil for RDL & MTL vaping. In addition, It features self-cleaning tech to bring you a clean and convenient vaping experience. A 0.96 inch OLED screen will tell you details vaping information, such as puff counter, wattage, voltage.
Details:
1. Self-cleaning tech, condensation-collecting in time
2. Comfortable grip, too light to hold
3. 0.96 inch OLED screen
4. 1500mAh battery capacity, type-c fast charging
5. Rotate it to adjust airflow
6. 0.18ohm DTL coil and 1.2ohm RDL+MTL coil included
Suorin Trident Kit
Trident Kit is inspired by the SLS racing version, Suorin Trident Pod Mod Kit is constructed of outstanding vaping dynamics and uncompromising lightweight design. Suorin Trident is powered by single 18650 battery in accordance with advanced ORI chipset. It can automatically monitor and manage the process to provide best vaping experience. The brand new Quick-Firing Technology improves the performance from 0.025s to 0.006s. Besides, Trident adopts a massive 4.4ml translucent pod to bring a long-time vaping with less refill time. With different TRI Coils and its dual airflow system, Trident ensures pure flavor and rich vapor than ever.
Details:
1. The fastest pod mod with 0.006s firing speed
2. SLS racing version inspiration, breathtaking design
3. Advanced ORI chipset, 5-85W adjustable power
4. Impressive performance with boost convertor
5. Dual airflow adjustment, 4.4ml translucent pod
6. Compatible with all TRI coils
7. Powered by single 18650 battery
8. 2h charging time with Type-C port
9. Low voltage/Over-charge/Short Circuit/8s Vaping/Open Circuit Protection
Aeglos H2 Kit is a portable pod mod kit. It has 1500mAh built-in battery capacity with type-c fast charging, and the wattage range is 5W-60W. You can rotate it to adjust airflow you want between your fingers. Aeglos H2 Kit comes with meshed 0.18ohm coil for DTL vaping, meshed 0.2ohm coil for RDL & MTL vaping. In addition, It features self-cleaning tech to bring you a clean and convenient vaping experience. A 0.96 inch OLED screen will tell you details vaping information, such as puff counter, wattage, voltage.
Details:
1. Self-cleaning tech, condensation-collecting in time
2. Comfortable grip, too light to hold
3. 0.96 inch OLED screen
4. 1500mAh battery capacity, type-c fast charging
5. Rotate it to adjust airflow
6. 0.18ohm DTL coil and 1.2ohm RDL+MTL coil included
Suorin Trident Kit
Trident Kit is inspired by the SLS racing version, Suorin Trident Pod Mod Kit is constructed of outstanding vaping dynamics and uncompromising lightweight design. Suorin Trident is powered by single 18650 battery in accordance with advanced ORI chipset. It can automatically monitor and manage the process to provide best vaping experience. The brand new Quick-Firing Technology improves the performance from 0.025s to 0.006s. Besides, Trident adopts a massive 4.4ml translucent pod to bring a long-time vaping with less refill time. With different TRI Coils and its dual airflow system, Trident ensures pure flavor and rich vapor than ever.
Details:
1. The fastest pod mod with 0.006s firing speed
2. SLS racing version inspiration, breathtaking design
3. Advanced ORI chipset, 5-85W adjustable power
4. Impressive performance with boost convertor
5. Dual airflow adjustment, 4.4ml translucent pod
6. Compatible with all TRI coils
7. Powered by single 18650 battery
8. 2h charging time with Type-C port
9. Low voltage/Over-charge/Short Circuit/8s Vaping/Open Circuit Protection