Ambition Mods Ripley MTL / RDL RDTA, designed by The Vaping Gentlemen Club, is elegant RDTA for MTL and RDL vaping. Ambition Mods Ripley RDTA comes with 22mm diameter and interchangeable 510 drip tips. Ambition Mods Ripley features compact 2-post single-coil deck and "Xylemas" SS304 Capillary tubes or mesh rolls to transport e-juice. Ripley RDTA has 3.2ml capacity and 2 opposite air inlets in the top cap. What's more, Ambition Mods Ripley can exchange Air pins for air inlets(2* 0.8, 2* 1.0, 2* 1.6, 2* 1.8, 1* blind) for wonderful flavor.


The Vaping Vaping Gentleman Club Designed Ambition Mods Ripley MTL RDL RDTA rebuildable dripping tank atomizer is with the same double opposed airflow system of the Bishop RTA is re-proposed, further increasing the possibilities by also inserting Air Pins with a wider flow. This system allows to obtain a high turbulence inside the chamber and therefore an excellent aromatic performance, while maintaining a laminar flow in intake and exhaust.

Ripley RDTA has kept the shapes and innovative features of the Bishop's Deck, now considered the reference point of the entire sector in terms of ease of rebuild, adding a surprise: directly inside the characteristic "sledges" of the cotton, Ambition Mods has put the holes for housing the Xylemas. Xylemas are stainless steel capillary microtubes developed by The Vaping Gentlemen Club and now considered one of the best possible system for the ascent of the liquid in an RDTA. The internal and external diameters of the Xylema and of their housings as well as the trays that have been obtained at their base have been carefully calibrated to offer the most reliable Juice-feeding possible. On the Deck you still find another distinctive feature of the Bishop: the two wells that collect the condensation and increase the air vortexes on the sides of the coil.


Features:
510 threading connection
Size: 22 x 52mm
Material: SS316 & POM & glass & silicone
Capacity: 3.2ml
22mm diameter
Elegant design RDTA for MTL and RDL
Designed by The Vaping Gentlemen Club, produced by Ambition Mods
Cooling grooves with holes on four levels for heat dissipation from top cap
Interchangeable 510 drip tips
Compact 2-post single-coil deck
Liquid transparent through "Xylemas" SS304 Capillary tubes or mesh rolls
3.2ml glass tank, filling by the filling opening on the deck
2 opposite air inlets in the top cap
Air pins for air inlets (2 x 0.8, 2 x 1.0, 2 x 1.6, 2 x 1.8, 1 x blind), exchanged by plug-in system
Extensive accessories included


More details for this RDTA, please check >> https://www.3fvape.com/51892-ambition-mods-ripley-mtl-rdl-rdta.html

Geekvape Z MTL Tank is the first Geekvape Z Series Tank exclusive for MTL! Industry-leading leakproof top airflow. Two hollow-carved 'Z' s on a slim body. New Geekvape A Series Coil, made for MTL! This MTL experience is from A to Z!




Features:
1. Stylish tank design, two hollow-carved 'Z' to protect the glass tube by the metallic shell
2. Top-to-bottom airflow system, side air inlets control
3. Industry-leading Z-level leakproof design, zero-leakage
4. New Geekvape A series coil for MTL
5. 2ml capacity, top filling design
...

Click here for more:

Geekvape Z MTL Tank: Geekvape Z MTL Tank

Hello,guys!I have good news for you. "Labour Day"Promotion is coming! Ends at 23:59:59 on September 8th.

Use discount code "LABOR12" for sitewide 12% Off.

Entrance:vapesourcing.com

You may like:

Uwell Caliburn AK2
m100 geek vape

VOOPOO Drag S Pro Kit 5.5ml 3000mAh
Quick Link:
VOOPOO TPP X Pod Tank 5.5ml

Description:
Drag S Pro Kit contains an 80W Mod of 3000mAh battery capacity and a 5.5ml TPP X Pod. It not only provides the top performance with a toggle switch (on/off button) but also retains the traditional On/Off function of pressing five times. Drag S Pro increases the output voltage to 8.5V, which makes it bring a more steady flavor even when the battery is about to run out. In addition, the new GENE.FAN 3.0 chip brings a more powerful cloud and a more stable flavor for it. Designed with SMART/RBA/TC mode, Drag S Pro will satisfy different vaping needs, Button and Auto mode are also available for you to choose from. There is a new airway layout to avoid direct contact with e-liquid. The new TPP X Pod is adapted to the most powerful coil of the TPP platform. Drag S Pro will present more precise airflow control and super cloud with the combination of a 360° infinite airflow system and bottom airflow. There are also air holes designed for MTL vaping. Drag S Pro-Kit is compatible with all TPP/PnP Coils. So many great functions it has, just get it to enjoy an amazing vaping experience.


Main Features:
1. One button switch, the boost mode of 8.5V
2. The new GENE.FAN 3.0 chip
3. 360° infinite airflow system and bottom airflow
4. With 5.5ml new TPP X Pod, newly upgraded TPP DM4 coil
5. 3000mAh built-in battery, 0.96 inches TFT screen
6. Equipped with high sensitive air sensor
7. 5V/2.5A upgraded type-c fast charging
8. Equipped with two TPP coils of 0.15ohm and 0.3ohm
9. Compatible with all TPP/PnP Coils


Specifications:
Brand: VOOPOO
Product Name: Drag S Pro Kit
Mod Material: Alloy+Leather
Output Power: 5-80W
Output Voltage: 0-8.5V
Mold Resistance: 0.1-3.0ohm
Battery Capacity: 3000mAh built-in battery
Pod Capacity: 5.5ml
Pod Material: Stainless Steel+PCTG
Pod Resistance: TPP-DM1 0.15ohm, TPP-DM4 0.3ohm(included)
Screen: 0.96 inch TFT screen
Color: California Orange, Classic Black, Garda Blue, Mystic Red, Sahara Brown, Sapphire Blue, Basalt Gray




Package Contents:
1* Drag S Pro Device
1* TPP X Pod 5.5ml
1* TPP-DM1 0.15ohm Coil
1* TPP-DM4 0.3ohm Coil
1* Type-C Cable
1* User Manual

Does anyone have both? If so, what are your thoughts? I have a Drag X coming in the mail today, but also really want the LV Ursa Quest. Thanks for any/all input

J

Sorry about the ad in the beginning.

Login to view embedded media

I, for some unknown reason, started craving a 50mg kick in the chest and bought myself a new fancy shmancy disposable. Lovely, it is. But. Mango ice cream isn't all that. Kinda weird actually. I love eating real mangoes but mango vapes are just weird. To me anyway.

Hi everyone im Ata from Turkey i have been vaping since 2016 im already in turkish vape forums but im looking for new friends and saw some more new setups we are having a difficult time for supplying new stuff from other countries in below you can see my setups.

Eleaf pico - asmodus minikin 2 - sx mini s class - wismec rx300 - drag x - drag 1 - vopoo vinci 2 - minifit - smok nord 4 - tarot mini - doggystlye 2k16 - griffin 25plus - kylin mini v2 - berserker v2 - taifun gt3 - maddog rda - troy 1xv3 - ida rba - tfv 8 - aromamizer plus v2 rdta

Wotofo Profile PS Dual Mesh RDA collaborates with Mrjustright1. A fascinating and warm cloud associated with the special dual mesh that keeps the vaping experience more enjoyable and fascinating. It is capable of 3ml juice well that is suitable for both direct dripping method and squonkable way. Armed with the flexible honeycomb and side airflow system, you can fine-tune the airflow by side airflow ring to takes more precise airflow control and super cloud. it is formed from the toughest stainless steel material for its body material and made of German PEEK for its insulator material, having an incorporated art into this solid body. In terms of the adjustable wattage, you can choose your power requirement by adjusting the wattage between 60W and 90W, and the recommended wattage is no more than 85W.

Quick Links:
Wotofo A1 Mesh Style Coils 10pcs

Parameter:
Size: Ф28.5* 35.5mm(with 810 drip tip and 510 pin)
Material: Stainless Steel & German PEEK Insulator
Drip Tip: 810 Resin Drip Tip
Configuration: Dual Mesh in Parallel or Series
Included Mesh Resistance: 0.3ohm, 0.6ohm(series build), 0.15ohm(parallel build)
Wattage Range: 60-90W(best 75-85W)
Juice Well Capacity: 3ml
Thread: 510

Features:
The collaboration of Wotofo and Mrjustright1
Dual mesh RDA
3ml e-Juice well capacity
Flexible honeycomb
Adjustable side airflow
Turn the usual parallel deck into a series deck
Direct dripping method & squonk way

Hey guys. Today let's check out the Wasp Nano RTA 2 by Oumier. It is the latest addition to the popular Wasp Nano family which is one of the best series of atomizers on the market. Here we go!

The new Wasp Nano RTA 2 is an upgraded version based on the V1 and has an overall diameter of 24mm, which will look great on both single battery and dual battery box mods. In addition, this tank has a maximum e-juice capacity of 2ml or 3ml and has a top fill design. This atomizer is primarily constructed out of stainless steel material and includes a PCTG drip tip with a wide bore.

Inside the RTA is a dual post single coil build deck, making coil building a breeze. Moreover, there are two large adjustable airflow slots at the bottom of the RTA, the unique airflow design prevents leaks and provides a better vape experience. Lastly, it has a gold-plated 510 connection pin, ensuring great conductivity. For the price, this Oumier RTA is hard to beat and can easily make it into the best RTAs of 2021.

Buy it here: Oumier Wasp Nano RTA 2 2ml 24mm

You may also like:
fat rabbit rta release date
innokin coolfire z80 review

Hellvape Dead Rabbit R Tank boasts a 5ml vape juice capacity and modifies the structure of its bottom airflow system and a condensed chamber aimed at a more delicate flavor.

Hellvape Dead Rabbit R Rebuildable Mesh Tank is made of SUS304, comes with 510 drip tip and 5ml capacity (6.5ml bubble glass) with quarter-turn top fill system. Dead Rabbit R features complete bottom airflow adjustment and condensed chamber to bring extremely superior flavor.

What's more, Dead Rabbit R Mesh Tank has R coil accessories, which can be built the coil 10 times, cost-saving. A 0.2ohm resistant value is recommended to the power range of 50 to 60W. One pack of R coil contains 10 stock coils, allowing you to rebuild your coil 10 times. Compared to the regular coil, it can save 75% cost and enjoy more joy by rebuilding your own tank. Dead Rabbit R Tank also adds a 510 drip tip that conforms to human mechanics, whats more, it utilizes a strong PCTG plastic material to ensure a superior level of durability.

Features:
510 threading connector
Diameter: 25.5mm
Capacity: 5ml / 6.5ml
Filling Type: Top filling
Coil: 0.2ohm Meshed Fe-Cr Coil
Recommended Power: 50~60W (0.2ohm)
Drip Tip: 510
Knurled grip to assist bottom airflow adjustment easily
Rebuild Your Coil 10 Times A Pack
Easy to guide e-liquid rapidly, with long life span
Cost saving over coils
New style meshed rebuildable tank

More details for this new mesh rebuildable tank, please check >> https://www.3fvape.com/51836-hellvape-dead-rabbit-r-tank.html

Hi, folks.

So, I have two Dotsquonk 100w and love them. Now I'm debating whether I should get another or go for the mech version. Anyone own the mech and can give me their thoughts on it?

The Wotof x MR.JUSTRIGHT1 Profile PS Dual Mesh RDA Rebuildable Dripping Atomizer is made from stainless steel in 28.5mm diameter.

TheWotofo Profile PS Dual Mesh RDA can level up your single-mesh vape! Once again, collaborated with Mrjustright1 in hope to bring excellent vape to vapers!

With Profile PS RDA, you are in the safe zone with ohms law when building with dual mesh coils of low resistance. You can turn the usual parallel deck into a series deck with this dual mesh RDA. A series deck will get you 4 times the resistance from the same build on a parallel deck (parallel deck design is basically the standard design for dual coil RDAs on the market). So now you can have either parallel builds or series builds of dual mesh coils on only one deck, with just an easy switch of the pin!

Flexible honeycomb airflow design, smoothening air inflows and straightening it out to evenly hit on heating coils for greater efficiency.

In addition to direct dripping method of juice feeding, the Wotof x MR.JUSTRIGHT1 Profile PS is also squonkable, and it also features a massive 3ml juice well.

The Wotofo Profile PS Dual Mesh RDA is very easy to build on. It has larger deck space and all the wonderful features that the original Profile deck has, like the clamp-securing system and the spring-loaded ceramic support for effective mesh-and-cotton contact. To sum it up, you get warmer vape experience, mass vapor production and fabulous flavor delivery.

Features:

510 threading connection
RDA Type: Dual Mesh RDA
Deck Diameter: 28.5mm
Overall Height: 35.5mm (with 810 drip tip and 510 pin)
Drip Tip: 810 Resin Drip Tip
Coil Configuration: Dual Mesh in Parallel or Series
Included Mesh Resistance: 0.30ohm (series build: 0.60ohm; parallel build: 0.15ohm)
Wattage Range: 60~90W
Recommended Wattage: 75~85W
Juice Well Capacity: 3.0ml
Juice Feeding Method: Drip / Squonk
Airflow Type: Adjustable Side Airflow
Body Material: Stainless Steel
Insulator Material: German PEEK

More details for this Wotofo PS Dual Mesh RDA, please check >> https://www.3fvape.com/51843-profile-ps-dual-mesh-rda.html

Zelos Nano Kit is a ultimate starter kit designed for great MTL vaping experience. It is the combination of a Zelos Nano Mod and a brand new Nautilus Nano Tank. Made by premium aluminum alloy body, it not only features an outstanding final appearance, but also an exceptionally pleasant hand feel. Designed with 5 different air intake adjustments (None, Φ0.8, Φ1.0, Φ1.2, Φ1.6 air intake holes), Zelos Nano will bring precise airflow adjustment, amazing vape and tasty flavor. Equipped with brand new Nautilus 1.0ohm Mesh Coil, you can get more concentrated aroma, and more flavorful vapor. In auto wattage detection mode, the device can determine the optimal output wattage based on the coil's resistance, and each resistance comes with three wattage level settings: Low, Mid, or High. Built with 1600mAh battery, it can be vaped a whole day. The ASP chipset used will guarantee your safety. Nautilus Nano Tank has 2ml e-juice capacity, features top filling system. Zelos Nano Kit is compatible with Nautilus coils and also supports Nautilus 2S 0.7ohm mesh coil.

Details:

1. Premium aluminum alloy body
2. Convenient top fill, bottom adjustable airflow
3. Compatible with Nautilus coils, Nautilus 2 coils, Nautilus 2S coils
4. Precise airflow adjustment
5. 1600mAh battery capacity, 2ml e-juice capacity
6. Type-C 1A charging, VW/Bypass output mode
7. Auto wattage detection
8. ASP chipset for safety protection: Vaping Over-time/Overdischarge/Battery Reverse/Short Circuit/Overheat/Low Voltage Protection

Do you want further more information about Freemax Marvos S Kit? Here comes a 3D Video on Freemax Marvos S 80W Kit, which shows you many more details of Marvos S Kit. So which feature can attract you to buy Marvos S 80W Kit?

Moreover, the 510 adaptor makes Freemax Marvos S 80W Kit so versatile, so you can use the Marvos DTL pod in the other Marvos Series vape devices (Marvos 60W, Marvos T 80W, and more Marvos Kits on the way ) and any vape tank on this Marvos S 80W Mod.

Please watch the video on Freemax Marvos S 80W Kit below:
Login to view embedded media

Air Bar Vapejoy Disposable 1500 Puffs is launched by Suorin.It has a stylish appearence.I think the color also looks very gentle.The mouthpiece design is comfortable,fits the lips.

The Vape Suorin Air Bar VapeJOY Disposable accommodates 5.5ml of Salt Nicotine E-Liquid with a nicotine level of 5%. Each Suorin Air Bar Vapejoy features one (1) device per package and has a smooth mouth to lung draw. Each VapeJOY disposable eCig features more than 1500 puffs!

Suorin Air Bar Vapejoy Disposable SPECIFICATION
Puffs:1500 Puffs
Battery:1000mAh integrated battery
Nicotine:5%
Capacity:5.5ml prefilled

Please go to vape online store to make an order.

You may also like:

bmor sober kit
uwell caliburn ak2 kit

Looking for 1 or 2 Reactors. I would prefer stock air holes but OK if they're not drilled out too big. Also big plus if they've already been drilled out for squonking.

I'm willing to pay original new part price. Possibly more for finders fee. As much as $50.00 each.

Version 1 or 2 is OK. Here is a pick for those of you like me that have piles of atty's and not too sure what they all are.

These are among my favorite squonking RDAs of all time and I've owned more than a few. At one time, I only used Ammits and had about a dozen of them. Realizing that was probably excessive, I've been letting a few go here and there.

These can be true MTL when using the single air hole on the AFC ring or provide a great restricted DL hit when wide open, which is how I run them. They are also darn near leak proof. I pocket carry these attys regularly. And unless you are bionic, you aren't going to over squonk these. I've never used them as a convential dripper but I imagine they would work well having deep juice wells. They are also some of the easiest to build RDAs I've owned.

On offer is one black and one stainless steel, 22mm. Both come with two drip tips, all unused (I put my own 510 tips on them). They also include solid 510 pins and spares.

Both have been scrubbed in hot water and dish soap and then ultrasonically cleaned in 70% isopropyl alcohol. I also put fresh o-rings on both. They show signs of use but are clean as a whistle.

$15 shipped each or $25 shipped for the pair.

The SMOK RPM 4 is the latest iteration of the old RPM AIO line from SMOK which also marks the launch of a newer line of coils which will no doubt be showing up in newer AIO's

SMOK RPM 4 - CHAPTERS

00:00 - Intro, specs and close look
07:13 - Vape
10:00 - Thoughts


Login to view embedded media

This RDA is brand new, never used. Only out of the box for the pics. Includes spares, 510 adapter, pair of what look like fused claptons, etc.

$15 shipped. PP F&F or buyer pays fees. Thanks!

Add it to this package for only $10! For Sale - Flawless 26650 100w mod and Hellfire Sentinel RDA clone combo

Hello, there are aromas that are 100% VG based and 100% PG based, how do they differ? If i were to add these aromas to a 70/30 base, would that increase VG content of the entire e-liquid?

Proverbs 24:16
For a just man falleth seven times, and riseth up again: but the wicked shall fall into mischief.


Sent from my iPhone using Tapatalk

Exvape Expromizer V5 MTL RTA
Hello everyone, today I would like to give my opinion on this product that sourcemore kindly sent me for review.
Before starting let's see the ten main features that Exvape promises us ...

1. Designed in Germany
2. Single-Coil platform
3. Sliding top fill cap
4. Pyrex glass tank with protection
5. Liquid control
6. Two ways of airflow control
7. Adjustable 510 pin
8. A merger between V3 and V4
9. Top filling method
10. Can be used with any type of e-liquid
Enjoy the reading.

Exvape Expromizer V5 MTL RTA; Packaging:
On the front we find various inscriptions in silver on a black background; Expromizer and Exvape Professional Atomizer, the gigantic embossed V5 logo, the written Designed in Germany, Exvape and the indication to the official website.

On the back of the box there is a silver plate with the V5 logo inside, again the writing "Exvape Professional Atomizer", below this plate, we find; the warnings, the packing list, some features, the barcode and the inevitable logos & brands.

On the side, the logo and the words "Exvape Professional Atomizer" appear again as a mantra, both in silver color.







Exvape Expromizer V5 MTL RTA; Packing List:
1 * Expromizer V5 RTA
1 * O-ring kit
1 * screwdriver
2 * M2 Replacement Screws
1 * Coil + Cotton
1 * Replacement Glass (Pyrey)
1 * User Manual



Exvape Expromizer V5 MTL RTA; Specifications:
Construction material: Stainless steel + Pyrex glass
Drip-Tip: 510 Stainless steel + POM
Height (without Drip-Tip): 40mm
Height (with Drip-Tip): 54mm
Diameter: 23mm
Capacity: 2ml
Thread: 510
Air flow: From top to bottom
Filling method: Superior



Exvape Expromizer V5 MTL RTA; Color range:
Brushed, Gunmetal, Sandblast, Black, Polished.



Exvape Expromizer V5 MTL RTA; First impressions:
Unfortunately I have never had the opportunity to test previous versions of Expromizer, so for me the Exvape V5 is a novelty and in this spirit I will go to analyze it.

I received the black version. Of this V5 I really like its "rugged" appearance with protected glass, the finishes look good, needless to say that the dimensions are also quite compact being a tank with only 2ml of capacity. An extension kit is also available on the market to increase the e-liquid flow rate up to 4ml.

The presence of an AFC with adjustment from above immediately leads me to think of a product intended for those users who require an absolutely leak-proof tank, but in order to give up a bit of "flavor". With this arrangement of the AFC I am almost sure that the sophisticated and demanding lovers of tobacco e-liquids will have to turn their attention to other tanks, certainly with AFC from below to start.

Exvape Expromizer V5 MTL RTA; Top Air-Flow:
Between the Top-Cap and the body of the tank there is a knurled ring, by rotating it it is possible to discover up to 5 holes of 0.8mm each, for restricted MTL vaping needs up to more open MTL / RDL, continuing in the rotation of the ring you can take advantage of a wide 1mm high, 12mm long slot for MTL / RDL vaping experiences.



Exvape Expromizer V5 MTL RTA; Refill from the top:
The refilling system designed by Exvape is childproof. It is necessary to hold the AFC ring steady and unscrew the Cap counterclockwise by grabbing it above the AFC ring nut. Subsequently, after having unscrewed the Cap, it is necessary to slide it to the side in the point indicated (visible in the second image below).
The generously sized slot allows for refil with bottles even with a rather voluminous tip.

Wotofo Profile PS RDA, the collaboration of Wotofo and Mrjustright1, is a dual mesh RDA with 810 Resin Drip Tip. Wotofo Profile PS Dual Mesh RDA features adjustable side airflow with flexible honeycomb. Wotofo Profile PS supports direct dripping method & squonkable way to fill e-juice.




Features:
1. The collaboration of Wotofo and Mrjustright
2. Dual mesh RDA
3. 3ml e-Juice well capacity
4. Flexible honeycomb
5. Adjustable side airflow
6. Direct dripping method & squonkable way
...

Click here for more:

Profile PS Dual Mesh RDA: Wotofo Profile PS Dual Mesh RDA

Innovation comes from the ultimate exploration of details. Voopoo Drag S Pro Kit contains a Max 80W iOutput Mod of 3000mAh battery capacity and a 5.5ml TPP X Pod. It not only provides the top performance with a toggle switch (on/off button), but also retains the traditional On/Off function of pressing five times. Drag S Pro increases the output voltage to 8.5V, which makes it bring more steady flavor even when the battery is about to run out. In addition, the new GENE.FAN 3.0 chip brings more powerful cloud and more stable flavor for it. Designed with SMART/RBA/TC mode( The temperature control mode needs to be downloaded from the official website of Voopoo by yourself,you can click here to find software.)




Features:
1. One button switch, the boost mode of 8.5V
2. The new GENE.FAN 3.0 chip
3. 360 Degree infinite airflow system and bottom airflow
4. With 5.5ml new TPP X Pod, newly upgraded TPP DM4 coil
5. 3000mAh built-in battery, 0.96 inch TFT screen
6. Continues the premium texture of metal and leather
7. The air holes are designed for MTL
8. SMART/RBA (TC mode) available
...

Click here for more:

Drag S Pro Kit: Voopoo Drag S Pro Kit | Healthcabin