Threads
-
Locked
Exvape Expromizer V1.4 MTL RTA Limited Edition
The Exvape Expromizer V1.4 MTL RTA Limited Edition, the upgrade version of the Expromizer V1 RTA vape atomizer, is constructed of Stainless Steel / PC / POM with 23mm diameter.
Expromizer V1.4 RTA Limited Edition has easy to wind single-coil deck. Exvape Expromizer V1.4 RTA included the tank expansion kit, three optional drip tips and 4 different tank variants to offer 8 different tank combinations.
Exvape Expromizer V1.4 RTA Limited Edition applied top filling design. Expromizer V1.4 has 6 airflow pins to adjust airflow more precisely for perfect draw and flavor. Its top cap has a bayonet lock. Both the top cap and the airflow ring have knurling to provide a good grip.
Features:
510 threading connection
Diameter: 23mm
Material: Stainless Steel / PC / POM
Capacity: 2.0ml / 4.0ml / 6.0ml
Tank atomizer limited edition
Three drip tips included
4 different tank variants
Easy to wind single-coil deck
Adjustable 510 pin screw
Top Filling with bayonet lock
Precise bottom airflow (including AFC Pins)
MTL: Designed for pulling from the mouth to the lungs
More details for this RTA, please check >> https://www.3fvape.com/51622-exvape-expromizer-v14-mtl-rta-limited-edition.html
-
Locked
Rincoe Jellybox Nano Pod Kit - 70g Lightweight 1000mAh
The Rincoe Jellybox Nano Pod Mod Kit maintains a compact design, constructed with a zinc alloy body and satin material finish and a PCTG tank section for durable construction.
Jelly box Nano has a range of coil options between 0.3ohm and 3.0ohm, and has two types of coils to choose from: Mesh 1.0ohm Coil and Mesh 0.5 Ohm Coil. Powered by 1000mAh Built-in Battery, and you can expect a full day of vaping pleasure when using a Type-C USB port, which allows 5V / 1A Type C charging specification.
Rincoe Jellybox Nano Pod cartridge holds up to 2.8ml of E-liquid, you can refill all sorts of different juices you want, satisfying both nic salt e-liquid and freebase e-liquid.
Rincoe Jellybox Nano comes in small size but 1000mAh big battery capacity. Jellbox Nano 30W is only 70g in weight. Its lightweight and portable size bring enjoyable experience anytiime and anywhere.
The built-in 1000mAh large capacity battery of Jellybox Nano Pod supports you throughout the day, while the Type-C charging port makes it easier to charge anywhere.
Jellybox nano kit features the 3 LED lights and shine through in to the full device lighting it up!
Nano Jellybox has adjustable airflow on the side which can be rotated to adjust the air input. The leaking proof system is also dedicated to provied the best vaping experience.
Features:
Size: 54 x 68.2 x 19mm
Material: Zinc alloy + PCTG + PC
Built-in 1000mAh Battery
Pod capacity: 2.8ml
Power: 10~30W
Input: 3.2~4.2V
Coil resistance: 0.3~3ohm
Charging specification: 5V / 1A
Efficient: 95%
Capable of Outputting 30 Watts
Type-C Fast Charging
Zinc Alloy Body and PCTG Tank Section
2.8ml E-liquid Capacity
More details for this pod system, please check >> https://www.3fvape.com/51597-rincoe-jellybox-nano-pod-kit.html
-
Locked
Drag X Pro and Drag S Pro, All-Round Master
- Voopoo
- 0 Replies
The Drag X Pro and Drag S Pro inherit the beauty of the Drag series, the body ratio has been perfectly designed for a comfortable hold, the well-crafted metallic and leather body is showing off its hand feel perfection. You can definitely tell its quality and elegance in just one glance.
Details of Drag X Pro
The differences between Drag X Pro and Drag S Pro
The new TPP X POD TANK is adopted to the most powerful coil of TPP platform, and initial semi-hidden button, which bring you a professional, reliable and sanitary vape experience all the time.
Smooth 360° infinite adjustment system, meets all your needs from MTL to DL.
Drag X Pro and Drag S Pro adopts the newly designed GENE.FAN 3.0 chip, which improves the comprehensive performance by 20% of the previous generation.
With the boost circuit, the Drag X Pro and Drag S Pro can reach to the highest voltage at 8.5V and it is much more stable even when your battery is low. Besides, with the boost circuit your coil will heat faster, maximize your atomization efficiency in very short time. You will feel stronger power and better flavor with every puff.
Comment below which features of Drag X Pro/Drag S Pro appeal to you the most?
Get to know the all-new Drag X Pro and Drag S Pro.
Learn more on VOOPOO VAPE Spark Your Moments
Details of Drag X Pro
The differences between Drag X Pro and Drag S Pro
The new TPP X POD TANK is adopted to the most powerful coil of TPP platform, and initial semi-hidden button, which bring you a professional, reliable and sanitary vape experience all the time.
Smooth 360° infinite adjustment system, meets all your needs from MTL to DL.
Drag X Pro and Drag S Pro adopts the newly designed GENE.FAN 3.0 chip, which improves the comprehensive performance by 20% of the previous generation.
With the boost circuit, the Drag X Pro and Drag S Pro can reach to the highest voltage at 8.5V and it is much more stable even when your battery is low. Besides, with the boost circuit your coil will heat faster, maximize your atomization efficiency in very short time. You will feel stronger power and better flavor with every puff.
Comment below which features of Drag X Pro/Drag S Pro appeal to you the most?
Get to know the all-new Drag X Pro and Drag S Pro.
Learn more on VOOPOO VAPE Spark Your Moments
-
Locked
VOOPOO DRAG S PRO AND DRAG X PRO review by hittman
- By hittman
- Device Reviews
- 8 Replies
Hello once again. Today I’m here to talk about not one but two new kits from Voopoo. These are the latest addition to the Drag family of pod mods. They are the Drag X Pro and the Drag S Pro. Besides the size difference, the X Pro can use a 21700 or 18650 battery while the S Pro has an internal 3000mah battery. Both are similar in this new design upgrade and have some really nice new features along with a newly developed pod tank. I will get into that more later. For now let’s see what’s included in both kits and take a look at some of the new features then I’ll give my opinions on how both performed.
WHAT’S IN THE BOX?
DRAG X:
DRAG S:
DRAG X SPECIFICATIONS:
DRAG S SPECIFICATIONS:
FEATURES:
1. One button switch( turn on/off or device locked)
2. Brand new TPP X Pod Tank
3. Stable output with boost circuit
4. 360 degree infinite airflow system
5. Gene. Fan 3.0 Chip inside
6. Supports Auto and button activation modes
DRAG X PRO:
DRAG S PRO:
INITIAL THOUGHTS:
Both of the units arrived in small boxes that are pretty standard packaging from Voopoo. Inside of each kit was the mod, the new TPP X Pod Tank, two coils, USB-C charging cable, and user guide.
The Drag X came with the TPP .15 ohm coil rated at 80-100 watts according to the literature and the .2 ohm coil is rated 40-60 watts. The X uses a replaceable battery and can be used with a 21700 battery or an 18650 battery with the included battery adapter.
The Drag S came with a .3 ohm coil rated for 32-40 watts and a .15 coil rated for 60-80 watts. The .15 coil is not the same as the one that came with the Drag X. This one is a TPP-DM1 and the one that came with the X is a DM3. The Drag S has an internal 3000mah battery.
The Drag X and the Drag S are very similar in appearance with both kits coming with the same tank that holds 5.5ml of liquid. Both mods have the same configuration on the front which has the fire button on top followed by the display screen, the + and – buttons, the new “One Switch”, and the USB-C charging/update port near the bottom.
On the left side of the frame are the words “Designed by Voopoo” and on the right side are the words “Gene Chip inside”. On the back is a nice leather like wrap with the words “Drag X Pro” or “Drag S Pro” stamped into the leather depending on which mod you are holding at the time. Above the leather is the new 360 degree airflow control. I very much like how it is built into the mod frame and we no longer have the rod sticking out for airflow adjustment like there have been on past versions. A definite improvement in my opinion. There is a wide airflow slot as well as a single small hole that would be good for a tight MTL for those that like that. Of course, above the airflow control there is the receptacle for the pod tank. Both mods now have an airflow sensor that allows the user to activate the mod by button firing or auto draw. I found the auto draw worked best with the airflow control mostly closed. The airflow sensor on both kits is offset inside the pod receptacle so it’s not in line with the coil and is thus somewhat protected against any liquid leakage.
Like I mentioned earlier, the S mod has an internal battery but the X mod can use either a 21700 or an 18650 battery with the included adapter. On the bottom of the mod is the hinged battery door. There is a small slide release on the cover used to open the lid. I found it to work very well compared to some other mods that I have used in the past that were often a little difficult to open. It did not appear that there was any markings on the inside of the mod for battery polarity but there is a – sign on the flip up cover underneath to indicate which way to install the battery.
On the .96” TFT display the following information is given going from top to bottom.
- The word Drag and battery level indicator
- Set wattage and mode of operation( S= Smart/ R= RBA) TC will be available for download on the Voopoo website
- Voltage under load and coil resistance
- Length of current puff and Puff counter
The menu operation for both mods is somewhat simplified due to the addition of the One Button Switch. Just like other Drag devices, the mods go into standby after a period of time and when you’re ready to use them again then you must press the fire button once before it will fire.
- Press the fire button five times to turn the device on and off
- Press the fire button and the – button to clear the puff counter
- Press the + and – buttons to enter the menu where the choices are Switch, Mode, and Exit
- Once selected using the fire button, the switch menu allows you to use the switch to either lock or turn off the device. Once locked, the auto draw will still operate.
- Mode allows you to switch between Smart and RBA modes
Both kits include the new TPP X Pod tank. It is a really different design from the prior PNP and TPP pods. The tip included has two o rings and a metal ring on the bottom that matches the tank. Below that is the new fill port design. You have to press the black fill port cap and turn the ring to the left and then the plug can be pulled away to fill the 5.5ml tank. The tank section is made of food grade PCTG. The body of the tank is made of stainless steel. The TPP X Pod tank uses the TPP series coils but has a wide range of compatible coils. The chart on top is from the Drag S Pro literature and the one below is for the Drag X Pro.
I of course preferred the .2 ohm coil in the Drag X and preferred the .3 ohm coil in the Drag S. It had been a while since I had used a TPP coil and forgot how good the flavor and vapor production is with them. I do like these coils and have tested them during prior reviews. The .15 ohm coil included with the Drag X is just out of my range of operation. I just can’t do more than a couple puffs at 80-100 watts. I just am not comfortable running higher than 60-70 watts even with 3mg liquids.
If you aren’t familiar with the TPP series of coils, they are a push and pull coil just like the original PNP coils but have larger liquid flow openings in them. I think both coil types were very good but have experienced some leakage with the PNP coils in the past. I have not up to this point experienced any leaking with the TPP coils that were included in both kits.
FINAL THOUGHTS:
I very much enjoyed testing the Voopoo Drag S Pro and the Drag X Pro. I like that the S has the large 3000mah battery and also like that the X can use the 21700 size battery for longer battery life especially when running higher settings.
The new features like the 360 degree airflow control, the One Button Switch, Auto fire, Gene 3.0 with boost circuit are all welcome additions to these devices. Also the new TPP X Pod Tank design is very nice in my opinion. To be honest it took me a little bit to figure out the new fill port design. I didn’t get at first that you needed to push in on the black tab in order to turn the ring and open the port for filling. I’m ecstatic that they moved away from the bottom fill port that was used on both the PNP and original TPP pods.
I even liked the included Drip tip which is usually one of the first things I would normally change. I do think that if I was going to consistently use this tank in auto fire mode then I would probably use a tip with a little more restricted airflow in order to get better performance from the airflow sensor. I felt like the tank produced very good flavor and vapor production but the airflow ring had to be mostly closed in order for the auto draw function to work well. Once I had it dialed in though I was pretty happy with it.
It has been promised that in the future users will be able to download an update so that temperature control will be available in the menu along with Smart and RBA modes. The cable that comes with the kit must be used in order to update and the triangle shape on the cable connector must be pointed down in order for the mod to update.
Here we are again. So, would I recommend the Drag S Pro and the Drag X Pro for you? I think it’s good that there are two options to fit those that have to have replaceable battery units and also fit those that prefer to charge an internal battery. I almost forgot to mention that the Drag S charges at 5v/ 2.5A which is a very nice charging rate but it is recommended to use the included cable from Voopoo. So, in conclusion, if you would like a very well performing pod mod with many coil options then Yes I would recommend whichever of the two would best fit your type of use. I’d like to thank Voopoo and Aimer for sending these two kits for this review and I have thoroughly enjoyed using them. As always, a big thanks goes out to the readers. Below are links to the Voopoo site for the two devices that were covered in this review.
VOOPOO VAPE Spark Your Moments
VOOPOO VAPE Spark Your Moments
WHAT’S IN THE BOX?
DRAG X:
DRAG S:
DRAG X SPECIFICATIONS:
DRAG S SPECIFICATIONS:
FEATURES:
1. One button switch( turn on/off or device locked)
2. Brand new TPP X Pod Tank
3. Stable output with boost circuit
4. 360 degree infinite airflow system
5. Gene. Fan 3.0 Chip inside
6. Supports Auto and button activation modes
DRAG X PRO:
DRAG S PRO:
INITIAL THOUGHTS:
Both of the units arrived in small boxes that are pretty standard packaging from Voopoo. Inside of each kit was the mod, the new TPP X Pod Tank, two coils, USB-C charging cable, and user guide.
The Drag X came with the TPP .15 ohm coil rated at 80-100 watts according to the literature and the .2 ohm coil is rated 40-60 watts. The X uses a replaceable battery and can be used with a 21700 battery or an 18650 battery with the included battery adapter.
The Drag S came with a .3 ohm coil rated for 32-40 watts and a .15 coil rated for 60-80 watts. The .15 coil is not the same as the one that came with the Drag X. This one is a TPP-DM1 and the one that came with the X is a DM3. The Drag S has an internal 3000mah battery.
The Drag X and the Drag S are very similar in appearance with both kits coming with the same tank that holds 5.5ml of liquid. Both mods have the same configuration on the front which has the fire button on top followed by the display screen, the + and – buttons, the new “One Switch”, and the USB-C charging/update port near the bottom.
On the left side of the frame are the words “Designed by Voopoo” and on the right side are the words “Gene Chip inside”. On the back is a nice leather like wrap with the words “Drag X Pro” or “Drag S Pro” stamped into the leather depending on which mod you are holding at the time. Above the leather is the new 360 degree airflow control. I very much like how it is built into the mod frame and we no longer have the rod sticking out for airflow adjustment like there have been on past versions. A definite improvement in my opinion. There is a wide airflow slot as well as a single small hole that would be good for a tight MTL for those that like that. Of course, above the airflow control there is the receptacle for the pod tank. Both mods now have an airflow sensor that allows the user to activate the mod by button firing or auto draw. I found the auto draw worked best with the airflow control mostly closed. The airflow sensor on both kits is offset inside the pod receptacle so it’s not in line with the coil and is thus somewhat protected against any liquid leakage.
Like I mentioned earlier, the S mod has an internal battery but the X mod can use either a 21700 or an 18650 battery with the included adapter. On the bottom of the mod is the hinged battery door. There is a small slide release on the cover used to open the lid. I found it to work very well compared to some other mods that I have used in the past that were often a little difficult to open. It did not appear that there was any markings on the inside of the mod for battery polarity but there is a – sign on the flip up cover underneath to indicate which way to install the battery.
On the .96” TFT display the following information is given going from top to bottom.
- The word Drag and battery level indicator
- Set wattage and mode of operation( S= Smart/ R= RBA) TC will be available for download on the Voopoo website
- Voltage under load and coil resistance
- Length of current puff and Puff counter
The menu operation for both mods is somewhat simplified due to the addition of the One Button Switch. Just like other Drag devices, the mods go into standby after a period of time and when you’re ready to use them again then you must press the fire button once before it will fire.
- Press the fire button five times to turn the device on and off
- Press the fire button and the – button to clear the puff counter
- Press the + and – buttons to enter the menu where the choices are Switch, Mode, and Exit
- Once selected using the fire button, the switch menu allows you to use the switch to either lock or turn off the device. Once locked, the auto draw will still operate.
- Mode allows you to switch between Smart and RBA modes
Both kits include the new TPP X Pod tank. It is a really different design from the prior PNP and TPP pods. The tip included has two o rings and a metal ring on the bottom that matches the tank. Below that is the new fill port design. You have to press the black fill port cap and turn the ring to the left and then the plug can be pulled away to fill the 5.5ml tank. The tank section is made of food grade PCTG. The body of the tank is made of stainless steel. The TPP X Pod tank uses the TPP series coils but has a wide range of compatible coils. The chart on top is from the Drag S Pro literature and the one below is for the Drag X Pro.
I of course preferred the .2 ohm coil in the Drag X and preferred the .3 ohm coil in the Drag S. It had been a while since I had used a TPP coil and forgot how good the flavor and vapor production is with them. I do like these coils and have tested them during prior reviews. The .15 ohm coil included with the Drag X is just out of my range of operation. I just can’t do more than a couple puffs at 80-100 watts. I just am not comfortable running higher than 60-70 watts even with 3mg liquids.
If you aren’t familiar with the TPP series of coils, they are a push and pull coil just like the original PNP coils but have larger liquid flow openings in them. I think both coil types were very good but have experienced some leakage with the PNP coils in the past. I have not up to this point experienced any leaking with the TPP coils that were included in both kits.
FINAL THOUGHTS:
I very much enjoyed testing the Voopoo Drag S Pro and the Drag X Pro. I like that the S has the large 3000mah battery and also like that the X can use the 21700 size battery for longer battery life especially when running higher settings.
The new features like the 360 degree airflow control, the One Button Switch, Auto fire, Gene 3.0 with boost circuit are all welcome additions to these devices. Also the new TPP X Pod Tank design is very nice in my opinion. To be honest it took me a little bit to figure out the new fill port design. I didn’t get at first that you needed to push in on the black tab in order to turn the ring and open the port for filling. I’m ecstatic that they moved away from the bottom fill port that was used on both the PNP and original TPP pods.
I even liked the included Drip tip which is usually one of the first things I would normally change. I do think that if I was going to consistently use this tank in auto fire mode then I would probably use a tip with a little more restricted airflow in order to get better performance from the airflow sensor. I felt like the tank produced very good flavor and vapor production but the airflow ring had to be mostly closed in order for the auto draw function to work well. Once I had it dialed in though I was pretty happy with it.
It has been promised that in the future users will be able to download an update so that temperature control will be available in the menu along with Smart and RBA modes. The cable that comes with the kit must be used in order to update and the triangle shape on the cable connector must be pointed down in order for the mod to update.
Here we are again. So, would I recommend the Drag S Pro and the Drag X Pro for you? I think it’s good that there are two options to fit those that have to have replaceable battery units and also fit those that prefer to charge an internal battery. I almost forgot to mention that the Drag S charges at 5v/ 2.5A which is a very nice charging rate but it is recommended to use the included cable from Voopoo. So, in conclusion, if you would like a very well performing pod mod with many coil options then Yes I would recommend whichever of the two would best fit your type of use. I’d like to thank Voopoo and Aimer for sending these two kits for this review and I have thoroughly enjoyed using them. As always, a big thanks goes out to the readers. Below are links to the Voopoo site for the two devices that were covered in this review.
VOOPOO VAPE Spark Your Moments
VOOPOO VAPE Spark Your Moments
-
Locked
WOTOFO MDURA KIT REVIEWED BY BIGBOB2322
- By Bigbob2322
- Device Reviews
- 4 Replies
Hello again folks and welcome back for today's review of the MDURA Kit from Wotofo that was provided to me from HEALTHCABIN and can be purchased clicking on this link Wotofo MDura 200W Mod Kit With NexMINI Sub Ohm Tank Atomizer 3.5ml . The MDURA Kit is a very simple and easy one because of it having only 1 power mode ( WATTAGE ) with no need of a menu just a few button combinations for adjustments. The device houses a replaceable dual 18650 and has a wattage range of 5-200 watts and thankfully has the round robin feature because it's not the fastest scroller. Weight was kept down as well as thickness of the device and it contours the hand really well. Along with the MDURA device is a Sub Tank called the NEXMINI Sub Tank that has a very nice twist that I'll cover shortly. Now that you know a little bit on this kit lets check it out shall we.
OVERVIEW
COLOR CHOICES
INCLUDED IN THE KIT
FULL MDURA KIT PARAMETERS
* Brand Wotofo
* Product Name MDura Kit
* Mod Dimensions 82mm*52mm*26mm
* Display 0.96" TFT screen
* Battery Type Dual 18650 batteries (not included)
* Resistance Range 0.1ohm-2.5ohm
* Power Range 5W-200W
* Charging Port Type-C
* Charging Current DC 5V/2A
* Atomizer Connection 510 connection
* Tank Size Φ25* 32.85mm (without drip tip and 510 pin)
* Tank Capacity Standard edition: 3.5ml straight PCTG tube/4.5ml bubble glass tube
* Drip Tip 810 delrin drip tip
* Filling Method Top filling
* Airflow Type Adjustable bottom airflow
* Threading 510 thread
* Color King Kong Black, King Kong Blue, King Kong Orange, King Kong Red
FEATURES
SIMPLE EASY TOP FILL
COMPATABLE COILS
INCLUDED COILS ( BOTH ARE INCLUDED )
NEXCHIP WITH TYPE-C 2A FAST CHARGING
DUAL 18650
ATTRACTIVE LEATHER AND VERY LIGHTWEIGHT
SIX DIFFERENT BACKGROUND COLORS TO CHOOSE FROM
FIRST IMPRESSIONS
Many of you that have purchased Wotofo products know just how difficult it is to open and get to the object that you just bought, Wotofo changed their packaging a while back to a much better and easier to open type of packaging but it seems they have reverted back to the difficult package opening, you almost have to destroy the package to get to the product.
With packaging out of the way lets get back to my fist impressions of this kit. The device has a rugged appearance with some soft leather that wraps around the device making it very comfortable in the hand.
Another reason it's comfortable is even though it's a box mod it's very thin nature just fit's the palm of your hand perfectly without any slippage thanks to the leather wrap. The metal frame surrounding the leather is a gunmetal color but in different shades of light it gets a tinge of other colors that sometimes appear.
Also provided in this kit is the NEXMINI Sub Tank that fits the MDURA well, it's shipped with the straight 3.5ml tube installed and the bubble 4.5 glass tube is packaged, normally I would use the bubble glass for added capacity but in this case the straight tube in my opinion looked better so I used it in the testing. I'm not a fan of tall tanks and was glad this 25mm was short in stature even with the straight tube.
The NEXMINI Sub Tank has triple airflow slots airflow with 6 holes of the same diameter in each of the slots that produce a very nice RDL vape, I had no goofy sounds or whistles vaping it using every type of setting, airflow was very smooth and about average in sound, not very loud. The top fill works very well and it's a slider top cap, look for the arrow colored in white and push to reveal the fill port. I get a perfect RDL vape closing off 1 hole as pictured below, what is adjusted on 1 slot is adjusted on all 3 slots.
Filling the NEXMINI is a breeze by sliding open the top cap to reveal the spring loaded fill port that seals after the bottle tip is removed. If using a 100ml bottle or larger you will need to remove the drip tip when filling, all other sized bottles and dropper bottles work without having to do so.
Having the 510 centered or at least pretty close to being centered brings the look and comfort of using this combo of the tank and mod all together. The 510 plate is held in place with 3 screws, there may be a nut also securing it as well inside. Tanks will sit flush with no gap showing.
The batteries are loaded into the device via a bottom hinged door as many devices use, this battery door has quite a lot of movement without any batteries being inside and when shaken is very noisy but after batteries are installed the door feels solid and no noise is heard from it when the device is shaken. I've went so far as to tap the bottom battery door very hard on a solid surface many times to get it to fail and pop open but it never did. To open the door push in the direction of the arrow, there is also ribbing to help your finger or thumbs grip.
I applaud Wotofo on their polarity markings done in white color on the battery door as well as markings for A&B in white also, inside the battery tubes both tubes have correct polarity and are marked with a red + for positive and a blue - for negative. All company's should have the polarity marked this way.
I've already shown you one side of the device that has the only branding that is a stand out with in very small print NEXCHIP INSIDE, there is more branding but it's so lightly stamped in the leather that you really have to look for it. In the 2nd picture it's barely visible towards the spine of the device, pictured below is the other spot on the device with branding of Wotofo and it's logo at the very bottom in the leather next to the 2 green accent thread running from top to bottom. This side of the device is also where the charge port is located, unlike some that are difficult to pull the charge plug out the MDURA is easily unplugged when or if you need to use the type-c charge port.
We now come to the display screen of the MDURA, in the past I have always liked Wotofo displays because they have all the important information you need nicely laid out and their display screens are usually bright and have vivid images.
The MDURA didn't disappoint me in the display screen, indoors the screen is bight and vivid but outdoors in direct sunlight it washes out some.
If you like to customize your display screen with different colors you will be happy to know that you have 6 different background colors to choose from. I always liked the Wotofo green color that is displayed.
BLUE, GREEN, WHITE, RED, PURPLE, ORANGE
The display layout is pretty self explanatory but I'll list the info displayed from left to right and top to bottom.
* A battery bar B battery bar
* A battery percentage B battery percentage
* Wattage applied Lock/Unlock symbol
* Ohms
* Volts
* Puff counter
* Last vape ( seconds vaped )
USING THE WOTOFO MDURA KIT
The very first thing that I noticed was the size of this full sized mod, thin is how I would describe it and lightweight even after 2 18650 batteries were installed. If any of you have the Voopoo Argus GT this MDURA device has just about the same dimensions and is almost as light. The leather wrap is soft and has padding giving it a plush feel that almost sticks to your hand.
There is no ramp up when fired and buttons all feel nice as well as being very responsive when pressed. I mentioned earlier that the battery door really rattled when shaken with no batteries installed but is silent when batteries are installed, I don't shake my devices and probably wouldn't have heard it but like a shake test.
This is a 200 watt device that is painfully slow at scrolling and takes a full 20 seconds to reach 200 watts from 5 watts, thankfully the MDURA has the round robin feature that saves some time.
I couldn't be happier with the display screen even though in direct sunlight it does wash out some but indoors it works great, fonts are large enough and vey sharp and vivid .
Having a battery % for each battery tube as well as a battery bar is a nice bonus that I very much appreciate as well as marking the polarity in white on the battery door, very few company's do this.
Having a color display is good but having a choice of 6 color backgrounds is great and switching colors is effortless that I'll cover shortly.
Being a wattage only device makes it super easy to navigate through the features and adjustments with just a couple button combinations that I'll list below.
* On/Off - 5 quick presses of the fire/power button
* Color change - Press and hold the fire/power button and up button simultaneously
* Clear puff counter - Press and hold fire/power button and down button simultaneously
* Lock/Unlock wattage adjustment - Press and hold up and down buttons simultaneously
* Lock all controls - Press the fire/power button 3 times
The NEXMINI Sub Tank is a very nice one that isn't overly loud even though it has 3 airflow slots instead of the usual 2 slots that most have.
Airflow is very smooth at any setting and this is a tank that I actually use different settings on, some days I just want to get a great vape without having to inhale a ton of air and I can do it with this tank as well as get a airy vape on days I want that.
Both coils work well and give a nice flavorful saturated vape but the pre-installed clapton mesh coil is my favorite of the 2.
PROS
* Lightweight
* leather Padding
* Comfortable
* Thin
* Attractive
* Vibrant Display
* Multicolor Background Choices
* Not Excessively loud
* Very Good Flavor
* Solid Feeling Device
* Battery Polarity Marked In White And Colors
* Dual Battery Percentage
* Triple Airflow Slots
* Easy To Read Display
* Type-C
CONS
* Battery Door Feels Flimsy when Empty
* Slow Scrolling
* Drip Tip Must Be Removed For Filling Using 100ML Bottles
FINAL IMPRESSIONS
First off as most of you know I am a straight wattage vaper for the most part and enjoy fast power without using TC or power curves, I've tried them and prefer straight wattage and it's nice to come across a device that is very simplistic having only wattage as a power mode such as the MDURA.
Hand feel is great and the leather wrap really sticks to the hand, no worry of slippage out of your hand with a lightweight like this.
My one issue is the flimsy battery door, without batteries installed there is a lot of movement but when batteries are in place it's solid as a rock and I really tried hard to get it to fail but it passed with flying colors.
The 2nd issue I have is it's painfully slow 20 second scroll from 5 to 200 watts. Other than those 2 issues the mod proves to be a nice choice to get.
The NEXMINI Sub Tank is a good performer that produces more than enough vapor and with the supplied coils above average flavor is a given.
As I said earlier I am a big fan of the clapton mesh coil and feel it gives off better flavor than the straight mesh 0.2Ω coil while giving me the warmth that I like.
I didn't think I was going to like the tank when I first saw the triple airflow slots and if it didn't have the airholes inside the slots I might have had a different viewpoint but I think Wotofo did a great job on this tank and I do like it a lot.
Overall I think it's a very nice kit as a whole and I do recommend it .
I would like to thank Sue and Healthcabin for providing the MDURA Kit for the purpose of this review and it can be purchased at Heathcabin using this link Wotofo MDura 200W Mod Kit With NexMINI Sub Ohm Tank Atomizer 3.5ml
THANK YOU
BIGBOB2322
OVERVIEW
COLOR CHOICES
INCLUDED IN THE KIT
FULL MDURA KIT PARAMETERS
* Brand Wotofo
* Product Name MDura Kit
* Mod Dimensions 82mm*52mm*26mm
* Display 0.96" TFT screen
* Battery Type Dual 18650 batteries (not included)
* Resistance Range 0.1ohm-2.5ohm
* Power Range 5W-200W
* Charging Port Type-C
* Charging Current DC 5V/2A
* Atomizer Connection 510 connection
* Tank Size Φ25* 32.85mm (without drip tip and 510 pin)
* Tank Capacity Standard edition: 3.5ml straight PCTG tube/4.5ml bubble glass tube
* Drip Tip 810 delrin drip tip
* Filling Method Top filling
* Airflow Type Adjustable bottom airflow
* Threading 510 thread
* Color King Kong Black, King Kong Blue, King Kong Orange, King Kong Red
FEATURES
- High wattage mod & small-sized sub ohm tank
- High-performing, excellent build quality
- Durable with an exquisite leather wrap
- NexChip technology, rapid-firing in 0.001s
- 0.96" color screen, easy-to-navigate interface
- Child lock on fill port, completely leak-proof design
SIMPLE EASY TOP FILL
COMPATABLE COILS
INCLUDED COILS ( BOTH ARE INCLUDED )
NEXCHIP WITH TYPE-C 2A FAST CHARGING
DUAL 18650
ATTRACTIVE LEATHER AND VERY LIGHTWEIGHT
SIX DIFFERENT BACKGROUND COLORS TO CHOOSE FROM
FIRST IMPRESSIONS
Many of you that have purchased Wotofo products know just how difficult it is to open and get to the object that you just bought, Wotofo changed their packaging a while back to a much better and easier to open type of packaging but it seems they have reverted back to the difficult package opening, you almost have to destroy the package to get to the product.
With packaging out of the way lets get back to my fist impressions of this kit. The device has a rugged appearance with some soft leather that wraps around the device making it very comfortable in the hand.
Another reason it's comfortable is even though it's a box mod it's very thin nature just fit's the palm of your hand perfectly without any slippage thanks to the leather wrap. The metal frame surrounding the leather is a gunmetal color but in different shades of light it gets a tinge of other colors that sometimes appear.
Also provided in this kit is the NEXMINI Sub Tank that fits the MDURA well, it's shipped with the straight 3.5ml tube installed and the bubble 4.5 glass tube is packaged, normally I would use the bubble glass for added capacity but in this case the straight tube in my opinion looked better so I used it in the testing. I'm not a fan of tall tanks and was glad this 25mm was short in stature even with the straight tube.
The NEXMINI Sub Tank has triple airflow slots airflow with 6 holes of the same diameter in each of the slots that produce a very nice RDL vape, I had no goofy sounds or whistles vaping it using every type of setting, airflow was very smooth and about average in sound, not very loud. The top fill works very well and it's a slider top cap, look for the arrow colored in white and push to reveal the fill port. I get a perfect RDL vape closing off 1 hole as pictured below, what is adjusted on 1 slot is adjusted on all 3 slots.
Filling the NEXMINI is a breeze by sliding open the top cap to reveal the spring loaded fill port that seals after the bottle tip is removed. If using a 100ml bottle or larger you will need to remove the drip tip when filling, all other sized bottles and dropper bottles work without having to do so.
Having the 510 centered or at least pretty close to being centered brings the look and comfort of using this combo of the tank and mod all together. The 510 plate is held in place with 3 screws, there may be a nut also securing it as well inside. Tanks will sit flush with no gap showing.
The batteries are loaded into the device via a bottom hinged door as many devices use, this battery door has quite a lot of movement without any batteries being inside and when shaken is very noisy but after batteries are installed the door feels solid and no noise is heard from it when the device is shaken. I've went so far as to tap the bottom battery door very hard on a solid surface many times to get it to fail and pop open but it never did. To open the door push in the direction of the arrow, there is also ribbing to help your finger or thumbs grip.
I applaud Wotofo on their polarity markings done in white color on the battery door as well as markings for A&B in white also, inside the battery tubes both tubes have correct polarity and are marked with a red + for positive and a blue - for negative. All company's should have the polarity marked this way.
I've already shown you one side of the device that has the only branding that is a stand out with in very small print NEXCHIP INSIDE, there is more branding but it's so lightly stamped in the leather that you really have to look for it. In the 2nd picture it's barely visible towards the spine of the device, pictured below is the other spot on the device with branding of Wotofo and it's logo at the very bottom in the leather next to the 2 green accent thread running from top to bottom. This side of the device is also where the charge port is located, unlike some that are difficult to pull the charge plug out the MDURA is easily unplugged when or if you need to use the type-c charge port.
We now come to the display screen of the MDURA, in the past I have always liked Wotofo displays because they have all the important information you need nicely laid out and their display screens are usually bright and have vivid images.
The MDURA didn't disappoint me in the display screen, indoors the screen is bight and vivid but outdoors in direct sunlight it washes out some.
If you like to customize your display screen with different colors you will be happy to know that you have 6 different background colors to choose from. I always liked the Wotofo green color that is displayed.
BLUE, GREEN, WHITE, RED, PURPLE, ORANGE
The display layout is pretty self explanatory but I'll list the info displayed from left to right and top to bottom.
* A battery bar B battery bar
* A battery percentage B battery percentage
* Wattage applied Lock/Unlock symbol
* Ohms
* Volts
* Puff counter
* Last vape ( seconds vaped )
USING THE WOTOFO MDURA KIT
The very first thing that I noticed was the size of this full sized mod, thin is how I would describe it and lightweight even after 2 18650 batteries were installed. If any of you have the Voopoo Argus GT this MDURA device has just about the same dimensions and is almost as light. The leather wrap is soft and has padding giving it a plush feel that almost sticks to your hand.
There is no ramp up when fired and buttons all feel nice as well as being very responsive when pressed. I mentioned earlier that the battery door really rattled when shaken with no batteries installed but is silent when batteries are installed, I don't shake my devices and probably wouldn't have heard it but like a shake test.
This is a 200 watt device that is painfully slow at scrolling and takes a full 20 seconds to reach 200 watts from 5 watts, thankfully the MDURA has the round robin feature that saves some time.
I couldn't be happier with the display screen even though in direct sunlight it does wash out some but indoors it works great, fonts are large enough and vey sharp and vivid .
Having a battery % for each battery tube as well as a battery bar is a nice bonus that I very much appreciate as well as marking the polarity in white on the battery door, very few company's do this.
Having a color display is good but having a choice of 6 color backgrounds is great and switching colors is effortless that I'll cover shortly.
Being a wattage only device makes it super easy to navigate through the features and adjustments with just a couple button combinations that I'll list below.
* On/Off - 5 quick presses of the fire/power button
* Color change - Press and hold the fire/power button and up button simultaneously
* Clear puff counter - Press and hold fire/power button and down button simultaneously
* Lock/Unlock wattage adjustment - Press and hold up and down buttons simultaneously
* Lock all controls - Press the fire/power button 3 times
The NEXMINI Sub Tank is a very nice one that isn't overly loud even though it has 3 airflow slots instead of the usual 2 slots that most have.
Airflow is very smooth at any setting and this is a tank that I actually use different settings on, some days I just want to get a great vape without having to inhale a ton of air and I can do it with this tank as well as get a airy vape on days I want that.
Both coils work well and give a nice flavorful saturated vape but the pre-installed clapton mesh coil is my favorite of the 2.
PROS
* Lightweight
* leather Padding
* Comfortable
* Thin
* Attractive
* Vibrant Display
* Multicolor Background Choices
* Not Excessively loud
* Very Good Flavor
* Solid Feeling Device
* Battery Polarity Marked In White And Colors
* Dual Battery Percentage
* Triple Airflow Slots
* Easy To Read Display
* Type-C
CONS
* Battery Door Feels Flimsy when Empty
* Slow Scrolling
* Drip Tip Must Be Removed For Filling Using 100ML Bottles
FINAL IMPRESSIONS
First off as most of you know I am a straight wattage vaper for the most part and enjoy fast power without using TC or power curves, I've tried them and prefer straight wattage and it's nice to come across a device that is very simplistic having only wattage as a power mode such as the MDURA.
Hand feel is great and the leather wrap really sticks to the hand, no worry of slippage out of your hand with a lightweight like this.
My one issue is the flimsy battery door, without batteries installed there is a lot of movement but when batteries are in place it's solid as a rock and I really tried hard to get it to fail but it passed with flying colors.
The 2nd issue I have is it's painfully slow 20 second scroll from 5 to 200 watts. Other than those 2 issues the mod proves to be a nice choice to get.
The NEXMINI Sub Tank is a good performer that produces more than enough vapor and with the supplied coils above average flavor is a given.
As I said earlier I am a big fan of the clapton mesh coil and feel it gives off better flavor than the straight mesh 0.2Ω coil while giving me the warmth that I like.
I didn't think I was going to like the tank when I first saw the triple airflow slots and if it didn't have the airholes inside the slots I might have had a different viewpoint but I think Wotofo did a great job on this tank and I do like it a lot.
Overall I think it's a very nice kit as a whole and I do recommend it .
I would like to thank Sue and Healthcabin for providing the MDURA Kit for the purpose of this review and it can be purchased at Heathcabin using this link Wotofo MDura 200W Mod Kit With NexMINI Sub Ohm Tank Atomizer 3.5ml
THANK YOU
BIGBOB2322
-
Locked
Vanilla - Smoke E Mountain - Rhodium Mod (Brand New)
- By dnakr
- Member Classifieds and Swaps
- 2 Replies
Hey all, I have a Vanilla - Smoke E Mountain - Rhodium Mod (18650) that is brand new! I am wanting to sell it.
I paid over 200 hundred dollars back in the day for this mod when these were popular.
What would you offer me? my asking price at $95 paypal ff
I also have a brand new BLACK one and I think I might have one more that is still new (I will have to check the color on it).
Thanks!
I paid over 200 hundred dollars back in the day for this mod when these were popular.
What would you offer me? my asking price at $95 paypal ff
I also have a brand new BLACK one and I think I might have one more that is still new (I will have to check the color on it).
Thanks!
-
Locked
Is it risky to vape after covid-19 infection?
- By daud7078
- General Vaping Discussion
- 38 Replies
-
Locked
NEW | Nasty Fix 2.0 Disposable
- By Ed Swain
- Vape Superstore
- 0 Replies
From the makers of Nasty Juice, Nasty Fix 2.0 is a revamped version of the Nasty Fix disposable e-cig. The Nasty Fix 2.0 comes back better than ever with a 700mAh battery (vs the original Nasty Fix’s 280mAh) and 'AIRFIX' tech, granting you the ability to adjust the airflow intake by a simple rotation of the base of the pen.
Shop our range of disposable vapes
Shop our range of disposable vapes
-
Locked
It’s August GEEKDAY
- By vapbig
- HealthCabin
- 0 Replies
Dear Valued Customers,
Hope you are doing well! Geekvape has released lots of new and hot vapes recently. So Healthcabin teamed up with Geekvape is here to bring August GEEKDAY promotion for retail customers.
Customers who are Geekvape fans, don’t miss the chance and save more on your favorite devices!!
Sign in to get 30% OFF
- Old customers – Please sign in directly to get your member VIP price, which is about 30% cheaper than regular price (the price before login).
- New customers – Please create a new account to get the same member VIP price.
Extra 20% OFF coupon code is available for all Geekvape products, take the chance to join us!!
Offer details
- Coupon code: GEEKDAYAUG
- Date: 20th – 31st Aug, 2021 (-0600 GMT)
- Retail Only
Please view the It’s August GEEKDAY here.
-
Locked
Why do disposable e-cigarettes often leak oil?
- By Weisen
- General Vaping Discussion
- 32 Replies
-
Locked
Review: Vaporesso Target 80 Starter Kit 3000mah
- Everzon
- 0 Replies
Vaporesso TARGET 80 Pod Mod Kit is the new 80W Pod Kit addition to the VAPORESSO TARGET Series. The triangular TARGET 80 MOD body is more ultra-durable and suited to the outdoors. Its rugged appearance outside and the hi-tech Axon Chip inside are combined perfectly to provide an awesome DTL vaping experience outdoors.
With the latest GTX POD TANK, the TARGET 80 is compatible with all GTX coils and delivers a satisfying vaping experience regardless of preference.
TARGET 80 stands 130.9mm by 38.3mm by 30.8mm and houses a 3000mAh battery, ergonomically gripping and comfortably holding in your hand, in addition, it comes with a USB port to allow this device to charge swiftly that ensures you to expect all day of vaping pleasure and makes it more durable, as simple as charging your phone. With its 5ml e-liquid capacity, you can refill what you want for your most favorite, famed with its SSS leak-resistant technology that offers you a safeguard when you are in the wonderland of vaping.
There are two types of Coil that are compatible: GTX 0.2ohm MESH Coil (45-60W), GTX 0.3ohm MESH Coil (32-45W), and equipped with a 0.96 inch TFT Screen that makes your vaping controllable. In the output power range from 5W to 80W, you can press the UP/DOWN button to adjust, each inhalation is in your control. When it comes to its design of appearance, uneven texture and geometric patterns bring a sense of fashion and elegance. Come and have a taste of one!
Features:
Ergonomic shape, easy to hold
High-precision texturing
Internal 3000mah battery
Triangular target 80 mod
Axon chip
0.96 inch TFT screen with updated UI
VW mode, Pulse mode, F(t) mode
Adjustable airflow
Top filling system
Compatible with all GTX coils(triple-silicone version), including the RBA finish
Magnetic connection
Target 80 mod is compatible with vaporesso GTX pod tank and also the classic NRG S and GTX tanks by 510 adaptor
Short circuit protection
No-load protection
PCBA overheat protection
Auto-shutoff protection
Overcharge protection
Over-discharge protection
Overvoltage protection
Low voltage protection
Packages:
1* Target 80 Mod
1* GTX Pod tank 26(5ml)
1* GTX 0.2ohm mesh coil
1* GTX 0.3ohm mesh coil
1* Type-C cable
1* User manual
1* Warranty card
Quick Links:
Vaporesso Target 80 Box Mod 3000mah
With the latest GTX POD TANK, the TARGET 80 is compatible with all GTX coils and delivers a satisfying vaping experience regardless of preference.
TARGET 80 stands 130.9mm by 38.3mm by 30.8mm and houses a 3000mAh battery, ergonomically gripping and comfortably holding in your hand, in addition, it comes with a USB port to allow this device to charge swiftly that ensures you to expect all day of vaping pleasure and makes it more durable, as simple as charging your phone. With its 5ml e-liquid capacity, you can refill what you want for your most favorite, famed with its SSS leak-resistant technology that offers you a safeguard when you are in the wonderland of vaping.
There are two types of Coil that are compatible: GTX 0.2ohm MESH Coil (45-60W), GTX 0.3ohm MESH Coil (32-45W), and equipped with a 0.96 inch TFT Screen that makes your vaping controllable. In the output power range from 5W to 80W, you can press the UP/DOWN button to adjust, each inhalation is in your control. When it comes to its design of appearance, uneven texture and geometric patterns bring a sense of fashion and elegance. Come and have a taste of one!
Features:
Ergonomic shape, easy to hold
High-precision texturing
Internal 3000mah battery
Triangular target 80 mod
Axon chip
0.96 inch TFT screen with updated UI
VW mode, Pulse mode, F(t) mode
Adjustable airflow
Top filling system
Compatible with all GTX coils(triple-silicone version), including the RBA finish
Magnetic connection
Target 80 mod is compatible with vaporesso GTX pod tank and also the classic NRG S and GTX tanks by 510 adaptor
Short circuit protection
No-load protection
PCBA overheat protection
Auto-shutoff protection
Overcharge protection
Over-discharge protection
Overvoltage protection
Low voltage protection
Packages:
1* Target 80 Mod
1* GTX Pod tank 26(5ml)
1* GTX 0.2ohm mesh coil
1* GTX 0.3ohm mesh coil
1* Type-C cable
1* User manual
1* Warranty card
Quick Links:
Vaporesso Target 80 Box Mod 3000mah
-
Locked
First Look - Geekvape P Sub Ohm Tank
- By Verashu
- Vapesourcing
- 0 Replies
Hey guys. Today let's check out the Geekvape P Tank. It features a brand new appearance with wider metallic aesthetics and a glass-inset design to give it a brand new look while making the atomizer break-resistant. Here we go!
As mentioned above, the new design makes the tank more solid and the double layer structure results in easier disassembly while reducing the chance of misoperation. However, that's not all making the P Tank unique. You see, the structure features double juice chambers to save e-liquid and to have a cleaner glass swapping experience, two of which are included with purchase. This also means that the 5mL reservoir has abundant storage and is easy to refill by removal of the top cap. And, the circular top design also prevents liquid spillage during the refill process.
The airflow control ring's location is also in the middle of the tank to ensure precise control of its three intakes. This not only results in smooth flavor production but also a personalized vape experience, less liquid leakage, and reduced condensation. The P Tank also uses Zeus coils with multiple options and different configurations. With purchase, you will get the KA1 0.2ohm version which operates from 70 to 80 watts, and the 0.4ohm KA1 head that should be fired from 50 to 60 watts for the best possible flavor production.
Buy it here: Geekvape P Sub Ohm Tank 5ml
You may also like:
aegis x mod cheap
naked 100 e-juice price
As mentioned above, the new design makes the tank more solid and the double layer structure results in easier disassembly while reducing the chance of misoperation. However, that's not all making the P Tank unique. You see, the structure features double juice chambers to save e-liquid and to have a cleaner glass swapping experience, two of which are included with purchase. This also means that the 5mL reservoir has abundant storage and is easy to refill by removal of the top cap. And, the circular top design also prevents liquid spillage during the refill process.
The airflow control ring's location is also in the middle of the tank to ensure precise control of its three intakes. This not only results in smooth flavor production but also a personalized vape experience, less liquid leakage, and reduced condensation. The P Tank also uses Zeus coils with multiple options and different configurations. With purchase, you will get the KA1 0.2ohm version which operates from 70 to 80 watts, and the 0.4ohm KA1 head that should be fired from 50 to 60 watts for the best possible flavor production.
Buy it here: Geekvape P Sub Ohm Tank 5ml
You may also like:
aegis x mod cheap
naked 100 e-juice price
-
Locked
Review: Dovpo Blotto Single Coil RTA 23mm
- Everzon
- 0 Replies
Dovpo Blotto Single Coil RTA stretches 23.5mm in diameter, providing a 2.8ml straight glass tube and a large 5ml bubble glass tube. It is constructed of stainless steel with its body and glass tank, allowing it to become durable and capable of withstanding even the toughest conditions for your daily use. According to its glass tank, you can check the progress of the e-juice.
What’s more, it offers a dual diffusion airflow, and along with its 272-degree airflow, which supplies the smoothest draw and gives a fantastic and dense flavor. As well as its strengthened AFC ring and base, making it easier to install and remove. The colors of Blotto have three classic options: Black, Gunmetal, and Stainless Steel. All of its functionality and appearance give you a brilliant and premium experience. There are 3 colors for your choice.
Parameter:
Diameter: 23.5mm
Material: Stainless steel & PCTG & Glass
Capacity: 2.8ml / 5.0ml
Thread: 510
Features:
272 Degree airflow
Improved metal-backed airflow posts
Strengthened AFC ring & base
23mm diameter
Dual diffusion airflow for the smoothest draw
Easy filling
New look
Packages:
1* Blotto Single Coil RTA
1* Glass Bubble Tube
1* PCTG Bubble Tube
1* Accessory Bag
1* User Manual
1* Bottle Opener
What’s more, it offers a dual diffusion airflow, and along with its 272-degree airflow, which supplies the smoothest draw and gives a fantastic and dense flavor. As well as its strengthened AFC ring and base, making it easier to install and remove. The colors of Blotto have three classic options: Black, Gunmetal, and Stainless Steel. All of its functionality and appearance give you a brilliant and premium experience. There are 3 colors for your choice.
Parameter:
Diameter: 23.5mm
Material: Stainless steel & PCTG & Glass
Capacity: 2.8ml / 5.0ml
Thread: 510
Features:
272 Degree airflow
Improved metal-backed airflow posts
Strengthened AFC ring & base
23mm diameter
Dual diffusion airflow for the smoothest draw
Easy filling
New look
Packages:
1* Blotto Single Coil RTA
1* Glass Bubble Tube
1* PCTG Bubble Tube
1* Accessory Bag
1* User Manual
1* Bottle Opener
-
Locked
Lost Vape Thelema Quest 200W Vape Kit Review
- By Verashu
- Vapesourcing
- 0 Replies
Thelema Quest 200W Starter Kit is the latest launched by Lost Vape.It is powered by dual 18650 batteries and firing up to 200W.
Check out the Lost Vape THELEMA QUEST 200W Starter Kit which is paired with the UB Pro Pod Tank. Outfitted with the QUEST 2.0 Chipset, the THELEMA Quest Kit offers a temperature control suite for those that prefer a tailored vapor output.
Constructed from durable zinc-alloy, the chassis of the THELEMA Quest Mod utilizes PC materials for a transparent battery door for a visually striking look. Paired with the UB Pro Pod Tank, the Lost Vape THELEMA Quest Kit utilizes coils from the UB Pro Coil Series, delivering massive flavor and vapor from your favorite eJuice, holding up to 5mL within the side-filled pod.
You could click best online vape store to make an order.
Features
• Dual High-Amp 18650 Batteries
• Maximum of 200 Watts
• A Replaceable Battery Door
• Ergonomically Curved Mouthpiece
• Threaded 510 Connection
• Two Adjustment Buttons
• Mode Button
• Soft, Norm, and Hard Mode
• Intuitive Firing Button
• Full Protection Suite
Quick Link:Lost Vape Thelema Quest 200W Starter Kit
Check out the Lost Vape THELEMA QUEST 200W Starter Kit which is paired with the UB Pro Pod Tank. Outfitted with the QUEST 2.0 Chipset, the THELEMA Quest Kit offers a temperature control suite for those that prefer a tailored vapor output.
Constructed from durable zinc-alloy, the chassis of the THELEMA Quest Mod utilizes PC materials for a transparent battery door for a visually striking look. Paired with the UB Pro Pod Tank, the Lost Vape THELEMA Quest Kit utilizes coils from the UB Pro Coil Series, delivering massive flavor and vapor from your favorite eJuice, holding up to 5mL within the side-filled pod.
You could click best online vape store to make an order.
Features
• Dual High-Amp 18650 Batteries
• Maximum of 200 Watts
• A Replaceable Battery Door
• Ergonomically Curved Mouthpiece
• Threaded 510 Connection
• Two Adjustment Buttons
• Mode Button
• Soft, Norm, and Hard Mode
• Intuitive Firing Button
• Full Protection Suite
Quick Link:Lost Vape Thelema Quest 200W Starter Kit
-
Locked
Voopoo Drag X Pro Giveaway
- By vapbig
- HealthCabin
- 0 Replies
Dear Vape Friends,
Good days!
Voopoo has just released the brand new Drag X Pro Kit, features explosive power, stable flavour and rich intelligent functions. Do you want to try it? Here is the chance. We are partnering with Voopoo to giveaway Drag X Pro Kit with 5 winners in total. Ends on 29th Aug. Come join us and win it home for free!
*Colors will be shipped out randomly if you are lucky to win!
About Voopoo Drag X Pro Kit
The subtleties show the master’s quality. Voopoo Drag X Pro Kit adopts the upgraded GENE.FAN 3.0 chip, it provides explosive power, stable flavour and rich intelligent functions. With Auto/Manual mode and toggle switch(On/Off button), you can feel the top performance. Drag X Pro supports Smart/RBA/TC modes to satisfy every vaper. The new TPP X Pod is designed with 360 degree infinite airflow system and bottom airflow to maximize the atomization efficiency. It brings more precise airflow control and super cloud. The air holes are specially designed for MTL experience to enjoy smooth and rich flavor. The magnetic suction pod provides easy and sanitary way of filling e-juice.
Join & Win
Finish the tasks below and win Voopoo Drag X Pro Kit home easily. Good luck to you all!!
Please click here to join: HealthCabin Giveaway or Voopoo Drag X Pro Giveaway | HealthCabin