Hey my parentner and I just swapped from using Vuse pods to vape with refillable tanks. Just wondering if any one knows a similar juice to Vuse Polar Mint as it's my favorite and I'm missing it. My partner came home with a mint and it tastes like bubblegum. TIA

As part of our ongoing commitment to making vape e-zine style content, we have taken a look at the best disposable vapes available in the UK right now. While the UK isn't in the EU, it does still follow the electronic cigarette rules on nicotine as the rest of the bloc, which means disposable vapes in the UK are limited to 20mg nic. If you have ever tried a Puff Bar in the US, you may feel a little short-changed

For those who haven't, and who are perfectly happy with 20mg nicotine in a throwaway e-cig, this review is for you. Hit the bullet link below for our 2021 guide to the best picks, or if you want to just buy disposable vapes - click that underlined text. For everyone else who fancies a regularly updated inspo blog......

• Guide to the Best Disposable Vape Kits

The YDDZ Tannhauser Legacy RDA came out of left field from a company that has been making solid performing MTL RTA's to suddenly jump into what is a builders dream DRA. The Tannhauser Legacy with its postless deck has massive postholes for those large thick leg coils.

TANNHAUSER LEGACY RDA - CHAPTERS

00:00 - Intro and specs
01:54 - Close up and build & wicking
18:27 - Vape
19:31 - Thoughts


Login to view embedded media

So, I'm currently vaping a 50/50 mix of 50mg saltnic and 3mg freebase in a Tesla Invader GT with a 0.6 Ohm coil at 15W, essentially a 26.5mg liquid that I vape a lot but at this wattage goes really slowly, only 100 ml/month (doing this for about 6 months now). Doing something of an RDL with half of the airflow.

Today my pod system started giving me this weird bad smell from the bottom (where the ventilation holes and the charging port are, basically from here (see attached image). It's like the smell of burnt plastic, or rather burned/shorted circuitry, something like that. It doesn't affect the operation in any way, and doesn't actually alter the taste of the liquid (since the pod is top airflow), but I can still feel it plus it stays on my fingers.

So question 1 is, what the hell might that be? I had some accidental leaking inside the device, and I quite often swim in the pool/sea with the kid with the device sometimes catching some water drops from the bottom. Could the liquid/water damage be the reason for this kind of smell?

Now, it's quite unpleasant so I want to switch to something else. This setup, wattage, coil, coil longevity fit me very much so I'd like to keep as close to it as possible. The pod kit I'm looking at is Geekvape Aegis Boost Pro, it's most certainly an overkill with the 100W max but it has lots of pros including the IP67 rating that should prevent similar problems.

However, the highest impedance coils available for it seem to be 0.4 Ohm rated at 50-60W; there's no chance I'm gonna be vaping any sort of 50mg saltnic mix at that wattage. I don't mind lowering the nic level and increasing the amount of consumed juice a bit, but not too much. Taking into consideration the battery issues, would probably like to stay under 30-35W.

Question 2 then is: what's the lowest wattage I can possibly go below the 'rated' wattage of the coil? Will the mod allow me to do that? Let's say I want to vape that 0.4 Ohm at 20-25W, would that even be possible and if it is, would it be safe for the coil?

Question 3: what are some other suggested alternatives? I'd like a fairly compact pod system with replaceable coils, with 0.6-0.8 Ohm (possibly non-mesh) coils available, 1200mAh or more internal battery or replaceable 18650, at least 3-4ml pod capacity, IP rating would be nice, with coils that are known to last (don't wanna replace them every 3 days), USB-C is desirable. There's also a question of worldwide availability of coils since I'm currently in Thailand but should be travelling back to Ukraine some time next year. Aegis Boost Pro is a good example that fits everything above except for impedance; another thing I was looking at was Uwell Havok.

Thanks in advance!

the history of vaping, pieces of great beauty to use or for collection
Caravela by Pedro (remember the 1000 units produced?) Number 654 + asterisk in brass, all pipes in ss and brass as well as original packaging and various spare parts
mint condition (unused, i can clean the brass) less than half price 300 Euro + shipping




Juggernaut by M1 Vapors (remember the crazy lists?)
mint condition (unused) less than half price 110 Euro + shipping



beautiful mechanical titanium with touch activation button
by Mark Bugs the Wizard 18500
mint condition (unused) less than half price Euro 120 + shipping


thanks

I tried many juices...didn't like any of them. Maybe i'm picky...yes...probably. Most fruity/sweet juices taste like cough syrup. Miraculously, years ago, my vape shop starting selling Yogi Original Granola. Over the years they've developed some awesome flavors...I switched to Yogi Java quite a while back. 3mg...most excellent flavor. Stay away from anything involving "Salt"--Remember the "Bath Salt" military exp in Florida 2012? I'd advise researching that....I'm sure everyone knows never to buy anything from Royal Farms/7-11/wawa/whatever. NO JUULS. Be safe. Many things are changing.

My wife wants to get off the stinkies. I'm going the pod route to keep it kinda simple. Here is what I'm looking for. Tight mtl, adjustable air, and wattage control. I got her a voopoo argus with the mtl pod. But the mtl is too loose. Any suggestions would be greatly appreciated.

Hi, anyone who has recently had shipping to Aus, Im in Qld. I have been finding a lot of suppliers are not shipping to Au or if they are, the shipping is ridiculous.

I did buy hardware from E-juice the other day for just under $11US which is great, but I need Nicotine and some concentrated flavors. Any other places that send hardware to Aus would still be handy.

Thank you

(I was going to just write AUSSIE AUSSIE AUSSIE, and see if anyone came back with OY OY OY but I thought better of it ) ...

UPDATE

I have just found out that US cannot ship nicotine to Aus, not much I can do about that one coming late to the game and not having a lot stocked up. I do have some tobacco flavors that I purposely bought high nic so I could water it down. Im not up on all the legislations about all this, but if anyone can help me please. Feel free to message me if you would prefer. Thank you.

The MISO pod kit and the new MISO-C are like twin siblings, with the same specs and features but with slight differences in appearance.


The well-loved classic MISO pod kit has a pod cartridge with 1.2Ω resistance while the new MISO-C has a pod cartridge with .8Ω and 1.0Ω resistance.


The good news is that those pod cartridges are all compatible with both devices, so users have more options and can now choose the resistance they prefer.









-UNIVAPO

Hey everyone. I've been vaping for over a decade and this is just annoying as hell. I've had this mod for about six months and it will fire on it's own for 10s which causes it to shut down....OR.....sometimes it just won't even turn on. I've got batteries....a duel charger...I clean it...blah blah...any ideas of how to fix this issue would be welcome!

VOOPOO Drag X Pro Kit

Drag X Pro Kit is inspired by Drag Series. From the appearance to the structure, VOOPOO Drag X Pro Kit polishes every detail to the extreme. VOOPOO Drag X Pro Kit adopts the upgraded GENE.FAN 3.0 chip, it provides explosive power, stable flavour and rich intelligent functions. With Auto/Manual mode and toggle switch(On/Off button), you can feel the top performance. Drag X Pro supports Smart/RBA/TC modes to satisfy every vaper. The new TPP X Pod is designed with 360° infinite airflow system and bottom airflow to maximize the atomization efficiency. It brings more precise airflow control and super cloud. The air holes are specially designed for MTL experience to enjoy smooth and rich flavor. The magnetic suction pod provides easy and sanitary way of filling e-juice. TPP X Pod is compatible with all TPP/PnP coils.


Details:

1. Inspired by the best of Drag, an all-round master
2. Support single 18650/21700 battery, 5-100W output
3. GENE FAN 3.0 chip, improved 20% performance than ever
4. New TPP X Pod Tank, 5.5ml e-juice capacity
5. Innovative 360° infinite airflow system
6. Provide VV/VW/SMART/RBA/TC mode
7. Type-C 5V/2.5A fast charging port
8. Overtime/Short-circuit/Overcharge/Output Over-current/Over Discharge/Over-temperature/Max Power/Battery Reverse Protection





Drag S Pro Kit

Drag S Pro Kit contains a 80W Mod of 3000mAh battery capacity and a 5.5ml TPP X Pod. It not only provides the top performance with a toggle switch (on/off button), but also retains the traditional On/Off function of pressing five times. Drag S Pro increases the output voltage to 8.5V, which makes it bring more steady flavor even when the battery is about to run out. In addition, the new GENE.FAN 3.0 chip brings more powerful cloud and more stable flavor for it. Designed with SMART/RBA/TC mode, Drag S Pro will satisfy different vaping needs, Button and Auto mode are also available for you to choose. There is a new airway layout to avoid direct contact with e-liquid. The new TPP X Pod is adapted to the most powerful coil of TPP platform and is added a 510 base. Drag S Pro will present more precise airflow control and super cloud with the combination of 360° infinite airflow system and bottom airflow. There is also the air holes designed for MTL vaping. Drag S Pro Kit is compatible with all TPP/PnP Coils. So many great functions it have, just get it to enjoy amazing vaping experience.

Details:

1. One button switch, the boost mode of 8.5V
2. The new GENE.FAN 3.0 chip
3. 360° infinite airflow system and bottom airflow
4. With 5.5ml new TPP X Pod, newly upgraded TPP DM4 coil
5. 3000mAh built-in battery, 0.96 inch TFT screen
6. Continues the premium texture of metal and leather
7. The air holes are designed for MTL
8. SMART/RBA/TC mode available
9. Features Button and Auto mode
10. Equipped with high sensitive air sensor
11. 5V/2.5A upgraded type-c fast charging
12. Equipped with two TPP coil of 0.15ohm and 0.3ohm
13. 5-80W adjustable power
14. Compatible with all TPP/PnP Coils
15. Safety protections: Overtime/Short-circuit/Overcharge/Max Power/Output Over-current/Over Discharge/Over-temperature Protection




P Sub Ohm Tank Atomizer

P Sub Ohm Tank is an upgraded version based on Zeus Tank. GeekVape P Tank features 5ml large e-juice capacity and top refilling system. The 26mm Tank applies middle airflow leakproof system, which ensures excellent flavor. With double-layer liquid chamber with shock-proof glass tube, Poseiton Sub Ohm Tank provides better vaping experience. The three airway airflow control is designed for precise airflow control. The Tank is compatible with GeekVape Z Series Coil for soft taste and dense clouds.

Details:

1. Three airway precise airflow control
2. Middle airflow leakproof system
3. Shock-proof 5ml glass tube
4. Double-layer liquid chamber
5. Top filling, easy to disassemble
6. Compatible with GeekVape Z Series Coil

Hello! I am new here, but not new to vaping. I probably starting vaping around 8 years ago. The ejuice I used to buy was a simple Cherry flavor from Voda Vapor here in Arizona. It was the the best flavor that I have ever had the pleasure of vaping. I immediately stopped smoking cigs after trying their Cherry. A year or so later Voda Vapor changed the flavor of their Cherry, and it was just terrible. I ended up moving on juices, but have since picked up the cigs again. I have bought a lot of Cherry flavors over the years, and they all have the same funky taste that I hate. Too sweet, and a weird after-taste. What I liked about Voda Vapor's Cherry was that is was a little harsh, and not too sweet. I really loved the taste. Unfortunately, Voda Vapor has since gone out of business. I really want to stop with the cigs again, but can't find a vendor/flavor that I like that will get me over the hump. So my question here is....does anyone know of any similar Cherry flavors like Voda's out there? Or maybe what ingredients Voda used to make their original Cherry flavor? It may sound stupid, but I am feeling a little desperate here.

The KoguoVape Loki is an odd one. The 510 plate is recessed down inside what is essentially a "collar" along the top of the mod which is similar to the recessed 510 based mods that came out from 2016 to 2018.

KOGUOVAPE LOKI - CHAPTERS

00:00 - Intro and specs
01:32 - Close up
06:58 - Temp Control & Wattage Vape
08:14 - Thoughts


Login to view embedded media

Hi everyone I just joined this group today, and I have a question for you all...

I have been purchasing (and enjoying) my boulder rock pen since my Vladdin pods were discontinued (siiiigh)...but it seems that with at least half of the pods I fill, I get a burnt taste from them...with what looks like condensation where the coil is...does this happen to anyone else, and has anyone figured out why this happens or a solution? I know these are not very expensive, but still...its annoying!! Any help would be welcome!

Thanks so much

Hi there,

does anyone else have the Issue that the GTX Coils dont fit?
this is the one that came with the kit.

this is a 1.2 GTX Mesh.

I just realised that i have ordered me some GTX Coils while the ones that came with the Kit are GTX 2 Coils. So are they lying when the say compatible with all GTX Coils?
Does anyone else have this Problem?

Thanks for your answers.
Greetings from Germany (excuse my English)

FreeMax Marvos S 80W Mod Kit is consist of a Marvos DTL Pod and Marvos S 80W Box Mod. FreeMax Marvos S is powered by single 18650 battery (not included) with max 80W output. Marvos S features 0.9 inch TFT screen, easy to operate, and applied VW, VPC, Bypass modes to meet different needs. Paired with FreeMax Marvos DTL Pod Tank, it has 4.5ml capacity for long time use and MS mesh coil with adjustable side airflow for DL. The Pod features two-side airflow control and innovative 810 driptip, make it better than the best sub-ohm tank in the market.


Features:

Size: 25.7 x 51.7 x 110.2mm
Material: Zinc Alloy + stainless steel + leather
Battery: 1 x 18650 battery (not included)
Output: max 80W
Output modes: VW, VPC, Bypass
Screen: 0.9 inch TFT display
Capacity: 4.5ml
Pod: 0.15ohm MS mesh coil / 0.25ohm MS mesh coil
Compact design
Type-C Charging
Adjustable side airflow for DL
510 drip tip
Short circuit protection
Overheating protection
Undervoltage protection
Overcharging protection
Deep discharge protection
More details for this FreeMax Marvos S DTL Pod Kit, please check >> https://www.3fvape.com/51471-freemax-marvos-s-80w-mod-kit.html

Welcome the New Drag X Pro and Drag S Pro!
Find more details here:
Login to view embedded media

TARGET 80 is the new 80W Pod Kit addition to the Vaporesso TARGET Series. The triangular TARGET 80 MOD body is more ultra-durable and suited to the outdoors. Its rugged appearance outside and the hi-tech Axon Chip inside are combined perfectly to provide an awesome DTL vaping experience outdoors.




POD Capacity: 5ml/2ml(TPD)
Coils & Suggested Wattage: GTX 0.2ohm MESH Coil, GTX 0.3ohm MESH Coil
Battery Capacity: 3000mAh
Output Power: 5-80W
Charging Current: DC 5V/2A,Type-C
Battery Display: 0.96 inch TFT Screen
...

Click here for more:

Vaporesso Target 80 Kit: Vaporesso Target 80 Kit

This thread is for the general discussion of the Product Geekvape P Sub-Ohm Tank:. Please add to the discussion here.

Hey ECF,

It’s Friday again. How is everyone doing this week?

We are extremely pleased that the #CoolfireZ80 has been super popular since its release!

In order to gain a better understanding of what people think about the Coolfire Z80 we would love to hear what you have to say about it.

Comment below and let us know.

1. What do you like or what don’t you like about the Coolfire Z80 Zenith II kit?

2. And follow us via Pinterest and Twitter with the following link.
Pinterest:
InnokinTechnologyOfficial (InnokinTechOfficial) - Profile | Pinterest
Twitter:
https://twitter.com/InnokinStore
https://twitter.com/Innokintech

We will randomly choose the winners on August 16th.

More entries = More Chances to win.

Good luck & Thank you for your support!

Best Regards,
Innokin Team

Aegis Solo 2 Kit (S100) is designed with new tri-proof technology (industry-leading IP68 rating water & dust resistance, ground-breaking shock-resistance). It is powered by single 18650 battery with 100W max power for long-lasting vaping and convenience, you can recharge it with type-c cable. In order to avoid the accidental press, a-lock design is applied to Aegis Solo 2. There is a 1.08 inch full screen to show you the details and bring a better visual experience. Paired with Geekvape Z Subohm 2021 Tank that features leakproof top airflow system and supports Geekvape Z Series coil, Aegis Solo 2 will provide you amazing vaping experience. The e-juice capacity is 5.5ml.


GeekVape S100 Aegis Solo 2 Kit Giveaway, 1 winner, ends on August 26th

Enter here

Hey guys. Today let's look at the brand new Drag S Pro Kit by VOOPOO. It is a big upgrade to the original Drag S Kit, so you will definitely like it if you like its predecessor. Here we go!

The Drag S Pro continues the premium texture of metal and leather, using an ergonomic rounded design that perfectly fits the curved curvature of the fingers. Powered by a 3000mAh built-in battery, the mod can fire from 5-80W while supports Smart Mode, RBA Mode, and TC Mode. Thanks to the newly designed GENE.FAN 3.0 chip, the output voltage is increased to 8.5V, which brings more stable flavors even when the battery is about to run out. In terms of use, VOOPOO add a toggle switch to power on/off the device but the fire button can still be used to do the same thing. The addition of a 0.96" TFT screen makes the Drag S Pro pleasing to the eye on every side. At last, the mod has 7 protection to ensure the safety of use.

As for the TPP X Pod, it can store up to 5.5mL of e-liquid, and the filling port is located on the side near the top. The pod is compatible with all TPP coils, but from the kit you only get a 0.15ohm TPP-DM1 Coil and a 0.3ohm TPP-DM4 Coil. Even better, the PnP pods and coils can also be paired with the mod if you are tired of the TPP X Pod or coils. In terms of airflow, the TPP X Pod combines 360° infinite airflow with bottom airflow, bringing more precise airflow control and super cloud. Underneath the pod, there is a highly sensitive air sensor and a new airway layout, which avoids direct contact with e-liquid, providing a more sensitive and smoother vaping experience.

Check for more details here: VOOPOO Drag S Pro Pod Mod Kit 3000mAh

You may also like:
cheap voopoo pnp coils
bantam mango passion

You've started to quit smoking. Is there any flavor that is particularly suitable for quitting smoking?

I recently found a forgotten half-used bottle of salt nic vape juice (Yogi Salts peanut butter granola bar 35mg). After I started vaping it, I noticed some chest tightness after about 10-20 mins. This occurs even with a single drag (I normally take a 2-3 drags each time). Before this, I was consistently vaping a spearmint flavoured 25mg salt nic juice for the past month. Should I be concerned with this chest tightness at all ? The reason I'm asking is because I never had this issue before, not with this juice, nor other juices with similar flavour profiles or nic levels.

The VooPoo Drag X Pro vape kit is a lightweight device that supports sub ohm vaping. Capable to push up to 100W, it's powered by either a single 18650 or 21700 battery (NOT INCLUDED).

Featuring the technology of the GENE.FAN 3.0 chipset, the Drag X Pro pod mod kit for sale is easy to set up and offers the latest modes. Recommended for sub ohm vapers and anyone looking to move away from MTL vaping, this kit includes the TPP 5.5ml TPP X Pod which combines the simplicity of a pod and the performance of a classic sub ohm tank.

When it comes to performance, you'll experience a speedy vape with no lag thanks to the fast ramp-up the Drag X Pro offers. This quick firing time, along with a host of safety features, exists as a result of the advanced chipset inside each kit.

Each TPP X pod tank will hold up to 5.5ml of eliquid.The kit also comes with two of VooPoos TPP/PNP coils, both of which can be used with high VG eliquids. A 0.15(TPP DM3) and 0.2ohm(TPP DM2).

If you want to learn more details,please go to vape online store.

VOOPOO Drag X Pro Pod Mod Kit SPECIFICATION
Mod Parameter
Name: DRAG X PRO
Coil Configuration:double mesh coil
Material: Zinc Ally +Leather
Output Voltage:0-8.5V
Output Power:5-100W
Resistance:0.1-3.0ohm
Battery Capacity:Single 21700 or 18650 (Excluding battery)
Pod Parameter
Capacity:5.5ml
Material: PCTG
Resistance:0.15ohm(TPP DM3), 0.2ohm(TPP DM2)

Quick Link:VOOPOO Drag X Pro Pod Mod Kit 100W