Hello. What device do you recommend to vape 0mg nicotine with 70vg? I would like a mod type pod with a screen. I have read that the 0.3 ohm coils are the best for 70 vg liquids. What can you say to me? Thank you so much.

I know absolutely nothing about it. I have prostate cancer and can't sleep at night due to the pain, I tried a Norco before bedtime, and slept pretty good, but didn't like how I felt in the morning, so just as soon not mess with it.
The daughter in law was telling me about her boyfriend who was in an automobile wreck and used something called RJ something or other. He'd put just a drop on a cracker before bed and it helped him a lot.
I did briefly talk to my Primary care Dr., about the medical stuff, and while not against it, she would be concerned about me becoming dizzy, dis oriented, and fall and break a bone as I have osteoporosis. I want to talk to my Urologist about it, but don't see him till next month.
So anyway, maybe start a convo here and maybe I can become a little more enlightened.

Thanks.

Hello ECF,

I've been creeping for a few weeks now, but finally decided to take the plunge and make an account. After countless hours (days...weeks??!!) of research, hopefully I am at the point where I form some sentences together about what I'm looking for in a set-up and ACTUALLY make sense. I came here asking for help, so please feel free to tell me if you think I made a wrong decision on anything below.

So, here is my story...(cut to end to see the quick and dirty version)

First and foremost, what I WANT out of the build is excellent flavor. Not quite as important but still important is large clouds and a "cool" factor. I'm leaning way towards DTL over MTL, as I never smoked a cig in my life and have no nicotine addiction. This is something that will be used with friends or when I'm bored, so maybe 1-2x/week. I wouldn't say there isn't a budget, but let's say I have no prob paying for the best quality/functioning gear.

For the majority of my research, I was pretty set on going sub-ohm. But more and more I was reading how if you really want flavor, RDA's can't be beat. Then I start thinking about squonking more and more, and now I think that might be the best of both worlds. I get the convenience of the "tank" (not having to drip, which is what I was most concerned with), and all the flavor benefits. Any learning curve with the squeeze and determining the quantity (if you can squeeze too much) should be minimal. I really think it's a good option for me. I'm really curious what the pros think.

Now, surely you'd all make fun of me behind my back if I didn't acknowledge the elephant in the room: the atomizer. I need to learn a lot here, still. Any and all help would be appreciated. Single coil vs. double coil? Mesh? RDA? What I DOOOOO know is I have no problem paying for pre-builts out of convenience, assuming they aren't impossible to find in stock most of the time.

Equal in both importance and the level of my ignorance on the subject is (are?) batteries! I don't want to die, folks. So any recommendations on 1 vs 2 batteries, battery size, is also needed.

Once the battery thing is figured out, I can look at mods. I don't mind paying a pretty penny for a mod, but what I want is function and reliability first. As mentioned previously, I want "cool", but to a point. For reference, what I have been trying to figure out how to buy is something from BMM. So far, all attempts to get into said facebook group have come up short. But I like the challenge of the hunt, and am willing to see what it takes to get. I've looked at numerous other brands, but am willing to hear what you recommend! And regulated?

There doesn't seem to be any shortage of juice on the market. They all sound soooooo good! Lots of opinions out there, too. I looked all over the place for higher-end juice and ordered way too many already (around 1,000 mL). They range in VG from 50 (I fell for 5 pawns)-90ish. Can I smoke that range out of the same coil?

I'm sure I forgot something, but that is plenty to start!! Thanks so much for anyone who took time to read that and for any assistance they can provide.

Quick summary version:

This will be my first vape set up. I know little about the technical side, but have used vapes often over the past few years. I don't smoke (cigs). I think I want a regulated squonk w/ RDA (don't think the learning curve will be that bad), and plan to buy pre-built stuff instead of build my own if that's a thing. I need to find out what battery size and how many to use. Box mod is up in the air, and probably of least importance. Juice ranges from 50-90 VG currently. In the future, I will probably stay closer to 70. Don't let budget prevent a recommendation.

Hello, new here, my friend got caught recently at a roadblock, they don't supply, but are middleman, however, their phone was taken and I have a record of purchase from them on it, any advice what steps to take? Will HSA contact me, and how long will that take?

Coppervape remade this old but classic RTA - Hussar The End, Let's have a look of it.



The Coppervape Hussar The End clone RTA Rebuildable Tank Vape Atomizer is made from 316 stainless steel and PEI. This RTA is a 22mm rebuildable tank atomizer with 3.5ml capacity. The single coil building deck with 2.5mm airflow pin pre-installed.



Quick link to this Hussar RTA >> Buy Coppervape Hussar The End Style RTA Rebuildable Tank Atomizer

Vaporesso LUXE 80 S Kit is a 80W pod mod kit powered by Axon Chip with great functions. It is powered by single 18650 battery and features type-c 2A fast charging for longer and stable vaping. In addition, LUXE 80 S also features integrated aesthetic, user-friendly interface and intelligent recognition to offer you more fantastic vaping. Equipped with a 5ml GTX Pod 26 that adopts GTX Coils, it is of great compatibility to guarantee different vaping experience. The GTX Pod 26 utilizes SSS leak-resistant technology. There is also a lock ring to lock your juice in. It is easy to refill the juice and adjust the vapor you desire with top filling system and precise airflow adjustment.



Features:
1. 80W pod mod powered by Axon Chip with 0.001s insta-fire
2. Equipped with GTX Pod 26 that adopts GTX coils, RBA finish included
3. SSS leak-resistant technology
4. An additional outer layer of protection: lock ring
5. Top filling system ,precise airflow adjustment
6. Integrated aesthetic, user-friendly interface, intelligent recognition
7. Powered by single 18650 battery
8. Type-C 2A fast charging
...

Click here for more:

Luxe 80 S Kit: Vaporesso Luxe 80 S Pod Mod Kit 5ml

Check the Smok THINER Pod Kit, which impresses on you with a card style,more creative and space-saving than common bulky vaporizers.A 750mAh of rechargeable battery and a 4ml refillable Thiner Meshed Pod unite in delivering you thrilling vaping with long endurance and diverse flavors.And the Smok Thiner Pod Kit supports you to adapt the wattage level within 5W-25W to your taste preference,the higher the wattage is,the faster the heating speed is and the stronger the taste is.The plug-and-play system simplifies the pod replacement.Unimpressive as the 0.69inch OLED screen is,it is functional,clarifying your vaping by displaying the real-time data,including the battery life,selected power,resistance,voltage and puff numbers.Innovation keeps changing the vaping experience!

Been using this device since 2017, still going strong!

The Smoant VEER Pod Kit 750mAh, with the super light weight and portable size, the weight only 33.5gram. comfortable to hold and pocket-friendly. built-in 750mAh battery and the max output power 1-15W, which is enough for your daily vaping. The Smoant Veer Pod Kit has three battery indicator to show battery life.The Smoant Veer Pod can hold 2.3ml e-juice,with convenient side e-juice refill design,which maximum avoid e-liquid leakage and reduces the mess.Install the pod in different directions,you will get 2 different airflow and 2 different vaping experience.The Smoant Veer Pod Kit includes 0.6ohm Mesh Coil and 1.2ohm Ni-80 Coil,which is also compatible with Charon Baby and Battlestar Baby.So just get the Smoant Veer Pod Kit and enjoy the wonderful vaping.

Hey guys. Father's Day Vape Sale 2021 is coming! Ends at 23:59:59 on June 21st.


Details:
1. Use discount code "FD15" for sitewide 15% Off.
2. Flash Sale (can not use the discount code)
$16.99 Uwell Caliburn: Uwell Caliburn Pod System Kit 520mAh
$66.99 SMOK G-Priv 3: Smok G-Priv 3 Kit 230W with TFV16 Lite Tank
$51.99 Geekvape L200: Geekvape L200 (Aegis Legend 2) Kit 200W with Z Sub Ohm Tank 2021
$20.99 Suorin Air Pro: Suorin Air Pro Pod Kit 930mAh 18W

Entrance: Vape Shop Online E-Cigarette & E-liquid Best For Sale

Maxus 100W Box Mod Kit by Freemax has two editions available: Metal Edition & Resin Edition. As for you, which edition do you like better? And do you know the difference between the two editions of the Maxus 100W Kit? Freemax Maxus 100W Kit includes Fireluke 3 Tank Metal Edition and Maxus 100W single battery box mod. Fireluke 3 Tank Metal Edition is the upgraded version of Fireluke 3 Tank Resin Edition. As we all know, Freemax Fireluke 3 Tank Resin Edition has originally with Maxus 100W Kit Resin Edition.



What’s the big difference between the two editions is that Fireluke 3 Metal Edition is designed with Child Resistant Top Fill Design and ISO 8317 Child Resistant Certified. All you have to do is simply lift and slide the top cap and then fill the tank, super easy and convenient. However, the Fireluke 3 resin edition is designed with three steel balls into the top cap to increase friction without the chance of loosening the top cap and potential leaking.

Both editions have different colors available. The resin edition has six colors for options: Blue-green, Red-yellow, Black-red, Green-orange, Yellow-blue, Orange-black. Moreover, the splicing style 2-color resin panel of the Maxus 100W mod matches with the Fireluke 3 resin edition and makes the whole kit look so different from all the box mod kits in the market. However, the metal edition of Maxus 100W offers four brand new panel options: Gunmetal, Silver, Marble Black, and Stabwood Rainbow.

Finally, which one will you prefer between the Resin Edition and Metal Edition?

Vaporesso LUXE 80 Kit

LUXE 80 Kit is a newly released Pod Mod of LUXE Series. Combined with LUXE 80 Mod and GTX Pod 26, it features luxury and stylish design for compact style, and classic appearance brings you an unmatched vaping experience. The built-in 2500mAh battery garantees 5-80W max output, you can charge up via the Type-C 2A charging port. LUXE 80 adopts AXON Chip, it can fire up quickly at a speed of 0.001s. The GTX Pod 26 has 5ml large capacity, the magnets are designed for a precise airflow adjustment. SSS leak-resistant technology with an extra lock ring would provide a higher level of protection for your e-juice. GTX Pod Tank 26 is compatible with the Triple-Silicone version of GTX coils.


Details:

1. Ergonomic body shape, compact style
2. Long-lasting built-In 2500mAh battery
3. 0.96 inch TFT screen, user-friendly interface
4. 5ml GTX Pod 26, precise airflow adjustment
5. 5-80W max output, top filling system
6. SSS leak-resistant technology, mess-free
7. AXON chip with 0.001s Insta-Fire
8. Compatible with Triple-Silicone version of GTX coils





LUXE 80 S Kit

LUXE 80 S Kit is a 80W pod mod kit powered by Axon Chip with great functions. It is powered by single 18650 battery and features type-c 2A fast charging for longer and stable vaping. In addition, LUXE 80 S also features integrated aesthetic, user-friendly interface and intelligent recognition to offer you more fantastic vaping. Equipped with a 5ml GTX Pod 26 that adopts GTX Coils, it is of great compatibility to guarantee different vaping experience. The GTX Pod 26 utilizes SSS leak-resistant technology. There is also a lock ring to lock your juice in. It is easy to refill the juice and adjust the vapor you desire with top filling system and precise airflow adjustment.


Details:

1. 80W pod mod powered by Axon Chip with 0.001s insta-fire
2. Equipped with GTX Pod 26 that adopts GTX coils, RBA finish included
3. SSS leak-resistant technology
4. An additional outer layer of protection: lock ring
5. Top filling system ,precise airflow adjustment
6. Integrated aesthetic, user-friendly interface, intelligent recognition
7. Powered by single 18650 battery
8. Type-C 2A fast charging
9. Safety protections: Short-circuit/No Load/PCBA Overheat/Auto Shut off/Over Charger/Over Discharge/Over Voltage/Low Voltage Protection

LUXE 80 & LUXE 80S are the latest Pod Mod to debut from the LUXE series. If you are familiar with Vaporesso, you will know that the LUXE series from them are all luxurious/stylish vape kits with beautiful appearance and quality solid inside!

So today, let's check those 2 new luxurious kits together!



What's New For Vaporesso Luxe 80 & Luxe 80S?
1. 5ml Visible cartridge, with top filling slot & SSS leak-resistant technology
2. Precise airflow adjustment by rotating the cartridge
3. Compatible with all GTX series of coil including an RBA finish
4. Single-sized leather texture, anti-sweat & anti-smudge

PS: The cartridge is the same on from Vaporesso GTX Go 80, a pen kit also new released recentely from Vaporesso.

Any Difference Between Luxe 80 & Luxe 80S?

1. Battery
Luxe 80 come with 2500mAh built-in battery with 5-80W output
Luxe 80S come with single 18650 external battery with 5-80W output

2. Size
Luxe 80 is more portable with size of 39.4 x 28 x 111.1mm
Luxe 80S is wider and taller with size of 42.4 x 26.53 x 128.05mm

Learn More: (Login first to check better wholesale price)
Vaporesso Luxe 80
Vaporesso Luxe 80S

Elego 10th Anniversary Sale stills on! Join us now to get the biggest discount ever.

Elego provides the most competitive wholesale price for all the vape devices, login to check more latest vape kit with better price!

For any questions about Vaporesso wholesale or any vape wholesale in China, feel free to contact us.

Hey guys, I'm just curious, in your opinions, do you think what makes the different prices of e-liquid?

Hey folks,
I gonna introduce our new MGO D01 Disposable E Cig Nicotine Free Vape Pen

Feature:
Size: 110x20x7mm
Nicotine: 0mg/ml
Battery capacity: 280mAh
Liquid capacity: 1.4ml
Puffs number: 500-600
Flavors: Coffee, Cola, Grape, Litchi, Mango, Melon, Mint, Orange, Pineapple, Watermelon

I am interested in setting up an Arduino charger for my vape batteries. But the charger I want to use, an Adafruit bq24074 solar charger, does not support nominal 3.6V batteries. And basically all the Mooch approved batteries are nominal 3.6V. So, which 3.7V batteries are considered fairly robust for high current, vaping purposes?

This thread is for the general discussion of the Pod Vape SMOK latest product Thiner Kit. Please add to the discussion here.

Hi, Vaporesso fans,

We are introducing another new product to u, the LUXE 80 Kit. It's a new member of our LUXE family, an 80W Pod Mod with a 2500mAh built-in battery. The slogan for this product is "Luxury on the go". Here are some highlights:

1. Luxurious feel in Compact Design

Extremely compact in 80W Pod Mod


2. Added protection to SSS LEAK-RESISTANT TECHNOLOGY

Seal comprehensively / Saturate properly / Store safely

Lock ring added to prevent condensation into the battery


3. Highly compatibility

Compatible with all GTX coils including an RBA finish

The GTX POD can be compatible with other VAPORESSO products (GTX Go)


4. User friendly

Top filling system

Recommending the best wattage automatically


We also get the external 18650 version LUXE 80S along with the LUXE 80. Choose your own style!

More details here:

LUXE 80 Vaporesso » LUXE 80

LUXE 80 S Vaporesso » LUXE 80

IORE LITE Pod Kit uk is released by Eleaf. Eleaf IORE Lite Kit differs from previous IORE one-off series in that it is compatible with both pre-filled pods and open pods.Let's see what kind of surprise it brings.

Eleaf Vape uk IORE Lite Kit adopts ultra-light and superior materials for portable and on-the-go vaping experience. Eleaf IORE Lite is combined with a refillable 1.6ml pod and a rechargeable 350mAh battery in a minimalist design.

IORE Lite is draw-activated. It is super easy to use for its no-button feature. The whole body adopts smooth plastic finishes and soft rubberized finishes for your choices.

IORE Lite pod cartridge uk delivers most puffs of its kind, and supports pure and consistent flavor. The 1.2Ω replaceable pod would deliver the most satisfying flavor with quick slide-in design. It only takes about 40 minutes to fully charge the 350mAh battery of IORE Lite with USB Type-C port.If you interested in this pod kit,don't miss the affordable vape,please visit best online vape store uk.

SPECIFICATION
Battery Capacity:350mAh
OutPut:12W
Pod Capacity:1.6ml
Coil Resistance:1.2ohm
Charging:Type-C

Quick link:

Eleaf IORE LITE Pod System Kit 3000Puffs 350mAh
Eleaf IORE Lite Replacement Pod Cartridge 1.6ml (2pcs/pack)

Hello again and welcome back for today's review of the Suorin Air Pro that was sent to me from Suorin for the purpose of this review. The Air Pro is a fixed wattage pod with a output of 18 watts and has a juice capacity of a large 4.9mls of liquid. You also get the option of 2 types of firing the device ( AUTO DRAW OR BUTTON FIRE ) and there's a optional charging dock that will be available soon. The Air Pro has a very different look being very thin while still having a 930 mAh internal battery to power the device and a unique mouthpiece. Lets get to know the Suorin Pro Pod Kit a little bit prior to my review of it.


COLORS





INCLUDED WITH THE POD





PARAMETERS


* Size: 96 x 45 x 12.7mm
* Cartridge Capacity: 4.9ml
* Resistance: 1.0ohm
* Output Power: 18W
* Battery Capacity: 930mAh
* Charging current: 1000mAh
* Material: Zinc Alloy+ PCTG
* Charging: USB charging, Pogo Charging



LAVAL NOZZLE





VERY THIN





AUTO DRAW OR BUTTON FIRE





930 MAH INTERNAL BATTERY





OPTIONAL POGO DOCK CHARGING





1 Ω MESH COIL IN THE POD





FULLY PACKAGED KIT





POD CAN BE REFILLED 6 TIMES ( 30ML )





INITIAL IMPRESSIONS


I just reviewed the Suorin Ace a couple of days ago and the packaging of both devices are the same with a plastic form fitted insert for the device inside a box with another small box containing the charge cable and the pod underneath the device. With this kit you receive a device, pod, micro USB charge cable and user manual. The color that I received for this review is called faded skeleton and is a metallic two-toned color.





I wanted to start out the review with a fully charge device so I began charging the Air Pro and noticed just like the Ace Pod Device this one also has a very tiny bright led light in the fire switch that illuminates when charging with 3 different colors that define the strength of the battery, when vaping the tiny led light also illuminates letting you know how strong the battery is.

This led light is very bright but also very tiny that I really had to look hard to find out where the light source was coming from. When charging the led light will blink very slowly then when the device is fully charged the led light will stay lit with the color green.

The colors represent the battery's strength and are as follows.

* Steady Green - Fully Charged

* Blinking Green - 41-95%

* Blinking Blue - 10-40%

* Blinking Red - Less Than 10%






Unlike the Ace that uses a type-c charge connection the Air Pro uses a micro USB connection that is located on the opposite side of the fire button below 1 of the airflow holes, the Air Pro has 2 airflow holes, 1 on each side of the device.





Suorin gives the user of the Air Pro 2 options for inhale, #1 is auto draw and the other is the traditional button fire type to ignite the coil in the pod. Both methods work well and are quick to fire. In this photo you can see just how thin the Air Pro really is, it's thickest point is just above the fire button.




The connection of the pod is done as most pods do by using magnets, inside the device are 2 magnets located at each end of the device, the 2 gold colored spring mounted contact pins in the center are the connection points for the coil inside the pod itself. The center silver pin keeps the pod up far enough for the air intake holes to travel to the center of the coil imbedded in the pod, the pod can only be connected one way and once connected a haptic feedback will sound when the devices pod is connected correctly.





On the right of this photo are the 2 metal contact points of the pod with the coil's air intake between them in the center, the left side of the photo shows the large fill port with the plug unplugged and held up using a toothpick. Suorin even went the extra mile to ensure the pod stayed scratch free in transport by wrapping the pod in plastic that I kept on for this photo.





The Air Pro must be laid down flat when not in use, because it's so thin no other way is possible which concerned me regarding the coil staying saturated with juice but that quickly gave way when I noticed how low the cotton intake holes were on the coil. The laval nozzle airway design is supposed to disperse heat while traveling up and it does a good job of it.

This is a very large thin pod that has 3 dividers that are hollowed out at the bottom for juice to pass through from one section to another, I don't know what these dividers are used for other than maybe pod strength stability. Suorin lightly tinted the pods just enough with a very light tint so there is no problem viewing juice levels. This is a very odd pod with the coil and mouthpiece airhole being on 1 side of the device. Just remember to inhale on the side of the laval nozzle airway, it takes some getting used to but you get the hang of it quickly.







The base of the Air Pro has contact points for a soon to be released optional docking base for charging the device without the need for plugging in a charge cord.





In the time I've used the Air Pro I have 0 miss fires using the auto draw, I am a button guy but like it's little brother the Suoren Ace the auto draw works great and I rarely used the fire button in testing the device.

The flavor is very good and after about 4 or 5 refills it's still popping with good flavor. I wish that this had a adjustment for airflow because I prefer my MTL vape to be just a hair tighter so I have used the old trick of placing a piece of clear scotch tape across 1 of the side airflow intake holes and now I get the MTL vape that I prefer.

Battery life has been very good, I have not been able to get a full day from 1 charge but I tend to chain vape when busy at work and I've been super busy as of late so keep that in mind your vaping millage will vary because we all vape differently.

The color that was sent to me is a fingerprint magnet but I can't speak for the other colors. In my opinion this is a jeans pocket device being just a bit to heavy for a shirt pocket carry. The thinnest reference I could find and give the Air Pro some scale.





I would like to thank Mira and Suorin for providing the Air Pro Pod Kit for the purpose of this review. I hope that this review has helped anyone looking to purchase the Suorin Air Pro.

THANK YOU
BIGBOB2322

Looking to sell my Dvarw FL MTL to fund another purchase. It’s a great RTA, had no intentions of ever getting rid of it.. until something else came up. So here it is. $100 shipped. SOLD!

https://i.imgur.com/Hmx1QyL.jpg


Sent from my iPhone using Tapatalk

We kicked off the Fathers Day Sale early at Ejuice.Deals
Get 30% off the entire site this week!

Code: Fathers30
Expires June 21

Please let me know if you need any support or have any questions. I am happy to help!

Hi just wondering what tanks would be compatible and/or be the best to add to my uwell nunchaku 1 as I'd rather a glass tank one instead of the original it came with not a fan of the cotton