$52.99 YiHi SXmini SL Class Mod

SXmini SL Class Mod is a box mod that supports single 18650/21700/20700 cell. It is powered by YiHi SX485J and is made by 316 stainless steel and aluminum with etching. Besides, It is designed with various taste modes: Powerful+, Powerful, Standard, Soft, Eco & SXi-Q-S1~S5 and Novice mode. And you can customize your own taste through the innovative technology SXi-Q control system. SXmini SL Glass Mod also comes with some innovative features: upgradable firmware, reverse polarity, low resistance and so on.


Details:

1. Powered by the YiHi SX485J
2. 316 Stainless Steel + Aluminum with etching
3. TFT color screen
4. Supports 18650/20700/21700 battery
5. Max 100W (require battery current over 35A)
6. Joystick control
7. Precise temperature control
8. 26mm 510 connector
9. Added the Novice mode, more easy to operate for starters
10. Variable Joule supports all TC wire, SS/Ti/Ni
11. Innovative technology SXi-Q control system
12. Buck-Boost & Boost, DC-DC Converter
13. Upgradable firmware. Graphic user interface
14. Reverse polarity, short protection, low resistance, low battery voltage, overheating & battery over-charge protection





Oumier Voocean 80 Kit

Voocean 80 Kit is a pod mod system kit that is polished to be gentle, smooth and lightweight. And it comes with a 4ml large pod cartridge for whole day vaping. And it adopts innovative airflow control system from 0-10 level to provide you with fantastic flavor and effortless cloud production. Plus, it is compatible with VOM 0.8ohm and 0.2ohm mesh coils, rated for 50 to 80 watts. In addition, it is designed with the 510 thread adapter, allowing you to experience different vape with RDA, RTA or other types of the tank of 510 adapter. Besides, there is a magnetic connection between the pod and the Voocean mod. The Voocean Mod is powered by single 18650 battery and features an adjustable output range of 5 to 80W. And it is equipped with a screen to display clear vaping information.


Details:

1. Single 18650 battery and 80W max output
2. 4ml pod cartridge and bottom filling design
3. Compatible with VOM 0.2ohm and 0.8ohm mesh coils
4. Inventive airflow control system from 0-10 level
5. Designed with a 510 adapter for different vape with RDA, RTA, etc
6. Magnetic pod connection
7. Integrate multiple protections
8. Equipped with a screen







GeekVape Mero AIO Kit

Mero AIO Kit features stylish and simplistic appearance. Having large built-in 2100mAh battery capacity, it can offer you two-day vaping. It comes with three power outputs adjustment: Low, Med and High. With 510 connector design, it is of great compatibility and you can use your favorite tank to work with Mero device. Mero AIO Kit has 3ml e-juice capacity and features adjustable airflow intake. Compatible with GeekVape B Series Coils, It will provide you bigger cloud, smoother flavor and strong throat hit. Besides, you can also enjoy great MTL or DTL vaping experience with Mero AIO.


Details:

1. 2100mAh large battery capacity
2. USB type-c charging
3. Adjustable airflow intake for both
4. MTL or DTL flavor chasing
5. 3ml e-juice capacity
6. Supports GeekVape Boost Series Coils
7. 510 connector
8. Three power output adjustment: Low, Med and High

Hi, guys! Welcome to New Product Introduction! I have a question: do you need a Pod Kit at present? Today let me introduce you one pod kit named VapingGT GT Pen Pod Kit. Now let’s take a closer look at the pod kit below.
The Original VapingGT GT Pen Pod Kit is a pod system kit that features compact and portable. It consists of a 2.0ml pod cartridge with side filling design and a 900mAh built-in battery that can fire up to 40W. And it is charged via a safe and fast Type-C port. In addition, it provides Overcharge protection, Short circuit protection and Security protection to ensure your safety. Besides, it supports 0.5ohm GT Pen coil.


Main Features:
Material: Stainless Steel + PCTG + leather
Battery: Built-in 900mah battery
Pod capacity: 2.0ml
Resistance: 0.5ohm GT Pen Coil
Powered by 900mAh built-in battery with Max output power 40W
Compact & portable size
0.5ohm GT Pen Coil, with a base to steady the coil and prevent oil leakage
Half-transparent cartridge
Side-filling system Design
900mAh built-in battery and 40W max output
2.0ml pod cartridge and side filling design
Stable and fast type-C charging port
Battery power indicator and multiple protections
There are six colors for you to choose, so which color is your favourite? If you want to get one, you can come here:
VapingGT GT Pen Pod Kit >>>
Pod Cartridge:
VapingGT GT Replacement Pod Cartridge(1 PC) >>>
Coil Head:
VapingGT GT Replacement Coil Head(5 PCS) >>>

Last week we have shared a comparison between the SMOK Thallo and Voopoo Drag S. It looks like VOOPOO has known SMOK’s plan on Thallo, which has a good advantage over the Drag S – larger battery capacity and wattage output range, now VOOPOO released a new product to match Thallo – the Argus Pro from the Argus Line.

In this post, we will have another comparison for below 3 products – Argus Pro, Drag S and Thallo. Here we go:



Obviously, the Argus Pro is able to match up with the Thallo in the key specifications. While after having boths products in hands, honestely I have to say the Argus Pro is a better one out of its good quality leather material. For the vaping performance, I believe both of them are top winners, if you like PnP coils the Argus Pro will be a nice choice, while if you like RPM coils, Thallo is another choice.

BTW, the lanyard hook on the Argus Pro is totally fixed, you cannot remove it if you dont like it.

Share us your voices in comments below.

Hi again all. So here's the deal. Wanted a Nugget (gold) and now have 3. Before everyone rips me a new a hole for gouging, I'm only looking for what I paid. I'll pay shipping on my end so priority box $8.30.

So this is going to be higher than China vendors but EVERYONE is out of the Nuggets. Found this at NatureVapes in the UK so euro to dollar conversion plus $13 US to ship. SXK 70watt. I'm losing some money here.

I've had 2 SXK 70s since 2016 and have 0 problems with the Asmodus board. Resistance is same as my TAB.

So I'm looking for $117 USD shipped priority. CONUS only. No trades!

I've spoken with Evolv and because of Covid thier supplies are 3+ months out so SXK ain't getting boards either. You wanna wait, cool. You want instant gratification, here's your chance.

Thanks for looking all!

Asking $117, READ ABOVE BEFORE YOU ..... AND GRIPE

The UNI S is a super slim and lightweight vape mod device, it's the upgrade from the Yocan UNI box mod. Engineering team design this Yocan device for outdoor enthusiasts. It has preset 3 voltage levels, and has preheat mode.



The Yocan UNI S comes with the same 510 threaded adapter that comes with Yocan UNI package box. And you can install your favorite 510 threaded oil cartridge with this adapter.

Main Features:
super slim
lightweight vape mod
preset 3 voltage levels
preheat mode
510 threaded adapter

Learn more Yocan UNI S or other vape box mod features, please visit our official site Yocan.com

A new e-cigarette from Geekvape, this time in tube and pod format. The Mero AIO Kit is an easy-to-use and stand-alone all-in-one kit with its 2000 mAh. This kit also offers interesting power. A practical, nomadic and efficient electronic cigarette. What could be better?

Parameters:
Battery: built-in 2100mAh battery
Three output: Low White, Med Blue, High Green
Capacity: 3ml
Resistance: Geekvape B Series Coil 0.4ohm(25-33W)
Geekvape B Series Coil 0.6ohm(15-25W)

This AIO Mero pod takes advantage of Boost resistance technology. Its reservoir allows it to integrate 3 ml of eliquid with a simple top-fill system. Its simplicity does not prevent a certain customization with an adjustable airflow at its base.

Its compact dimensions: 112 x 22 mm allow it to be placed discreetly in your pocket or in a bag. A perfect material to start vaping, but also perfect to act as an auxiliary device. On the top of the Mero Aio GeekVape is a 3ml cartridge equipped with top fill. To inject your e-liquid, all you have to do is lift the seal that surrounds the top of the tank.

To satisfy the most demanding GeekVape allows you to manage the airflow by simply rotating the cartridge. Compatible with Boost coils, the Mero Aio pen vape kit from Geekvape ensures a tasty vape that will delight novices and experts alike.

Related vape kits you may prefer:
geekvape zeus nano tank for sale
geekvape aegis hero for sale

From Dick Durbin:

".. Many of these products were illegally introduced to the market after August 8, 2016, without an FDA marketing order. For years, FDA has inadequately enforced this deeming rule requirement, stemming from the fact that the agency never maintained a list of products on the market by August 8, 2016.

As part of FDA’s plan..., the agency committed to quickly removing from the market all new tobacco products that did not submit PMTAs by September 9. To do so, FDA has stated it will, “make publicly available a list of the deemed new tobacco products that are subject to the Sept. 9 deadline, were on the market as of Aug. 8, 2016, and for which a premarket application is submitted by Sept. 9, 2020."

It has been more than one month since PMTA applications were submitted to FDA.

In order to protect public health and uphold the duty to enforce against products on the market that are out of compliance, I urge FDA to immediately publish a comprehensive product listing of all relevant e-cigarette applications received by FDA...

... it is imperative that FDA publicize its list..., so thorough enforcement can quickly follow......"

"Richard Joseph Durbin is an American attorney and politician serving as the senior United States Senator from Illinois, a seat he was first elected to in 1996. He has been the Senate Democratic Whip since 2005, the second-highest position in the Democratic leadership in the U.S. Senate." Wikipedia

I was going to vote for Joe Biden in the coming election but now if I vote at all it will be Libertarian !

I've been using 14GA needles with 20ml syringes, the plunger is SO hard to pull and fills very slowly. Been looking for 12GA needles but the seem few and far between. I'm looking into getting bottles for measuring by volume any recommendations? Also for weight what kind of scales are you using? 500+ grams and .01g I assume would be needed? Thanks I am somewhat new to DIY

I have dabbled in mixing for a while but only now semi-seriously getting into it. I have made some good mixes for myself and a few for my grandpa. He has been vaping the same coffee from Good Life called 9 to 5 for years. I have made mix 2.5% French Vanilla Cream (TFA) 2.5% Cappuccino (FW) and 1% Sucralose, no nic, 50/50 PG/VG Steeped 2+ weeks

I didn't think it was harsh, he says it is only very slightly harsh compared with his daily juice. Any suggestion? or flavor suggestions? He likes a mild flavor with little sweetness, knocking the sweetener down as the Vanilla has some sweetness to it.

Thanks.

I have dabbled in mixing for a while but only now semi-seriously getting into it. I have made some good mixes for myself and a few for my grandpa. He has been vaping the same coffee from Good Life called 9 to 5 for years. I have made mix 2.5% French Vanilla Cream (TFA) 2.5% Cappuccino (FW) and 1% Sucralose, no nic, 50/50 PG/VG

I didn't think it was harsh, he says it is only very slightly harsh compared with his daily juice. Any suggestion? or flavor suggestions? He likes a mild flavor with little sweetness, knocking the sweetener down as the Vanilla has some sweetness to it.

Thanks.

I am having severe leaking problems with my innokin zlide. I tried changing coils but no dice.

Does anyone know of a good leak proof tank? 4+ ml capacity. I tend to run it at 20-30 watts as well.

Thanks in advance for the advice!

I placed an order last night with no issues, but...

Notice--PayPal payment method will be suspended for most e-cigarettes items: FastTech Forums

Notice--PayPal payment method will be suspended for most e-cigarettes items

Dear valued customers,

We're very sorry to inform you that PayPal officially revised the Acceptable Use Policy regarding e-cigarette related products, transactions involving most of the e-cigarette products will be prohibited from now. Other payment methods such as cryptocurrencies and gift cards are not affected. Non-e-cigarette products on our website are also not affected.

Paypal claims that e-cigarettes belong to activities requiring approval. But the fact is there is no way we can get the pre-approval after confirming with Paypal.

We are currently connecting with new credit card payment processors and will try to get them online asap.

At the same time, we will keep communicating with PayPal at all times. Once there are any further updates of this policy, we will make an announcement.

We apologize for any inconvenience that this change may cause, and thank you all for your understanding and continued support.

Please do not hesitate to contact our customer service if you have any questions, as we will be very happy to assist you with anything you need.

Best regards,

FastTech Team

Hi everyone! im new to vaping and i really like this hobby so far,however i study abroad in turkey and i want to figure out if i want to order coils and e-liqs to turkey for individual use,is there any way to do this? i own the TFV-16 lite subohm tank,my mod is the smok G-Priv 3 and i really like it, but i need help on how to get my stuff so i know how to act asap,thank you!

Hi
I am a new member from Auz and have been happily using a 50/50 or 60/40 VG/PG mix. My current supplier has been having commercial issues. So, I have tried some other suppliers, but they only supply 70/30 VG/PG. I have found that this mixture causes my coils to carbonise quickly and I soon get a burnt taste. I have been told to use lower Ohm coils which I already do - 0.5 ohm Aspire Tritan and wattage between 20 to 40 watts, I currently only run 14 watts where I have found I get the best flavour and longevity from my coils.
I have been told to use coils of a higher wattage
Can any advise on this as it appears most oversees suppliers are of the 70/30 type liquids

"
Vaping is supposed to be a form of harm reduction, that is, allow nicotine addicts to have access to the drug without the harmful tars and chemicals in cigarettes that cause cancer, heart disease, and other maladies.

Last year, the Journal of the American Heart Association published a study finding that vaping posed as great a heart risk as smoking itself. That study fueled public policies at all levels of government to stifle the industry. A lot of small business people had their livelihoods destroyed or damaged as a result.

Now, the study has been retracted — which is a very big deal in science — because the editors are “concerned that the study conclusion is unreliable” due to what appears to have been an uncompleted peer review process..........."

Major Anti-Vaping Scientific Study Retracted | National Review


Score one for our side. 'They will not stop until tobacco becomes regulated like a hard drug - 'We will not stop until our rights, especially our right to use a less harmful form of tobacco, such as vaping,
is assured.

I can't find my favorite flavor anywhere except in salts (which I don't use). I found another from them I like but I was wondering if they're closing down and I need to find a new brand. I'm super picky so I'm not looking forward to that.

Been vaping for years, I make my own stabwood, and own a cnc router. I've made mods in the past, but it's just hobby for me.
I'm interested in diy juice, but I'm pretty lazy.
Just here for the free knowledge, either giving it or taking it.

I make this thread to show what I did to my hellvape MD RTA and I don't get leaks anymore plus i don't need to use lot of cotton to wick it or have any problem with it....

1) my sliding topfill mehcanism didn't felt it was sealing properly on the rubber seal as I was sliding it....
I removed the rubber seal and then took some aluminium foil and put it underneath to push it up and then it was tighter as I slide it to provide better seal....go slow in that to make sure u don't over tighten it.....
Also as I see in all the mds even in YouTube videos as u close the slide mechanism u can see the rubber seal getting dragged by it at the point showen in the picture

Then I used some food safe glue and removed the seal and put a little glue underneath Soo it can't be draged while the slide mechanism closes...
After this not only I didn't had problems with flooding but I even got a dry hit....why?
Cause now it seals good and it creates a vacuum and the juice it's not running easy to the coil....since then I wick it using with much less cotton and I fluff it and I can see while I vape it bubbles come out in the tank cause it draws air from the cotton....

2) the next problem I had was that I was getting a minor leaking few times from the airflow just few drops but still was annyoing to me even if it was rare....the problem was the aiflow disks inside the building deck....they may have a rubber ring around them but when they sit on the deck it's metal to metal contact....that don't provide good seal....
So what I did that I stuffed some cotton into the disk hole that I am not using and put some aluminium foil underneath Soo it sits on it and not letting juice run to airflow of the deck....Let's say u use turnable number 1 with the large hole....I stuffed cotton from.undernearth and also put the aluminum foil on the one I don't use...
That was it never leaked again...

Those fixes worked for me and are tested many days maybe a month or something to verify them and they worked for me...for you maybe it's ok cause maybe it was a bad manufacturing process on my hellvape md.....

Happy vaping

The eLeaf Pico Compaq is, as the name suggests, a redo of the old eLeaf Pico but this time reformatted into a side by side style AIO with an external battery.

═╣ eLeaf Pico Compaq ╠═

00:00 ◄ Intro, specs and close look
06:55 ◄ Vape
08:17 ◄ Thoughts


Login to view embedded media

Up for sale my collection of Zen stuff:

- ZNA Lite b-stock (DNA 30)
- Kabuki Z2 tank (works with Nautilus 1.6 & 1.8 ohm coils)
- DX-650 2 mod. This is a Z2 threaded, 22mm mod that can be used as a regular mod or as a 18650 extension for the ZNA
- VERY VERY rare Z2 Link RDA with both dual and single caps. This is a vertical coil RDA that threads directly to the ZNA or the DX
- ZEN carto tank with glasses for standard & XL cartomizers
- 3 18490 batteries included
- 2 boxes of LocalVape carto tanks (I think these are re-branded boge)

This is retro vaping AF. (I still enjoy the Nautilus coils myself quite a bit)

Price: $220

Use code "get20more" at checkout to get 20% off. Expires 10/19 at midnight PST

Shop at ejuice.deals for deals on thousands of juices including:

Nude

Naked 100

Holy Cannoli

1. Artery Cold Steel AK47 50W Pod Mod Kit 1500mAh（NP Version/HP Version/XP Version）
Artery Cold Steel AK47 50W Pod Mod Kit adopts a compact zinc case with militaristic and ergonomic style. Artery Cold Steel AK47 50W Pod Mod features innovative dual airflow adjustment system and patent E-juice detachable tech to avoid dry burn. Artery Cold Steel AK47 works with built-in 1500mAh battery with max 1.5A Type-C charging and can reach up to 50W output. Artery Cold Steel AK47 pod maintains 4.3ml capacity with bottom filling design. Artery Cold Steel AK47 cartridge is compatible with eight different types of coils in four series and can adjust airflow. The first option is the rotating ring at the bottom of the coil. The second option is the round Gear button fixed on the side of the mod. Cold Steel AK47 also can replace top drip tip with two drip tips for DTL and MTL vaping.

Parameters:
Size: 30.5* 22* 111mm
Materials: Zinc alloy & PCTG
Battery: 1500mAh built-in battery
Wattage: Max 50W
Output Voltage: 8V
Resistance Range: 0.4-1.2ohm
Charging current: max 1.5A
Capacity: 4.3ml
Resistance: 0.7ohm mesh HP coil(15-18W)
1.2ohm HP coil(9-12W)

Features:
Internal 1500mah battery with max 200W output
Innovative dual airflow adjustment system
Patent E-juice detachable tech, avoid dry burn
Changeable MTL/DTL 510 Drip Tip
Bottom filling design
Short-circuit protections
Over heat protection
Over current protection
Weak battery protection
8S cut off protection
Low voltage protection
Battery over-charge protection

Packages:
HP Version:
1* Artery Cold Steel AK47 MOD
1* Cold Steel AK47 POD (HP POD)
1* Extra Coil
1* Drip Tip
1* Type-C Cable
1* User Manual
1* Warranty Card

NP Version:
1* Artery Cold Steel AK47 MOD
1* Cold Steel AK47 POD (NP POD)
1* Extra Coil
1* Drip Tip
1* Type-C Cable
1* User Manual
1* Warranty Card

XP Version:
1* Artery Cold Steel AK47 MOD
1* Cold Steel AK47 POD (XP POD)
1* Extra Coil
1* Drip Tip
1* Type-C Cable
1* User Manual
1* Warranty Card

2.Artery Cold Steel AIO 120W Pod Mod Kit
Artery Cold Steel AIO 120W Pod Mod Kit is the most versatile pod mod in the market which includes RBA deck & 510 adapter & XP Cores. Artery Cold Steel AIO Pod Mod Kit, the second member of the new Cold Steel Series, is powered by single 18650/ 20700/ 21700 battery with max 120W output and Type-C Charging. Artery Cold Steel AIO Pod kit is equipped with screen to show vaping date. Artery Cold Steel AIO RBA Version comes with 510 adapter to be a box mod. Artery Cold Steel AIO Pod Mod maintains two pods: Artery Cold Steel AIO RBA Pod 2ml and Artery Cold Steel AIO XP Pod 4ml. COLD STEEL AIO XP Pod is compatible with 0.15Ω/ 0.4Ω XP coils. COLD STEEL AIO RBA Pod is compatible with XP RBA for DIY fun. COLD STEEL AIO pod features slide-top filling design and adjustable airflow by removable silicone inserts.


Parameters:
Size: 39.1* 28* 106.5mm
Materials: Zinc alloy & PCTG
Battery: 18650/ 20700/ 21700 battery(Not Included)
Wattage: max 120W
Output Voltage: 0.5-8V
Resistance Range: 0.1-3ohm
Capacity: 2ml(RBA POD)/ 4ml(XP POD)
Resistance: 0.15ohm(60-80W)/ 0.4ohm(20-35W)/ XP RBA


Features:
Powered by single 18650/ 20700/ 21700 battery with max 120W output
Best Performance RBA Deck
510 Adapter to be a box mod
Patent E-juice detachable tech
Multiple Work Mode
Slide-top filling design
RBA Pod & XP Pod
Type-C Charging Port
Numerous protection functions
Short-circuit protections
Over heat protection
Over current protection
Weak battery protection
Reverse battery protection
8S cut off protection
Low voltage protection
Battery over-charge protection


Packages:
XP Version:
1* Artery COLD STEEL AIO MOD
1* COLD STEEL AIO XP POD (0.15ohm XP Core Including)
1* 0.4ohm XP Core
1* 18650 Battery Adapter
2* O-rings
4* Air Reduction Silicon Part
1* User Manual
1* Warranty Card

RBA Version:
1* Artery COLD STEEL AIO MOD
1* COLD STEEL AIO RBA POD (RBA Including)
1* COLD STEEL AIO MOD 510 Adapter
1* Pre-made Coil (Ni80 Triple Fused Clapton)
1* 18650 Battery Adapter
1* RBA 510 Adapter
1* Screw Driver
2* Hex Screws
2* O-rings
4* Air Reduction Silicon Part
1* User Manual
1* Warranty Card

Vape Flash Sales:
$4.49 VOOPOO Drag Nano Pod System Kit 750mah

$15.49 Uwell Ironfist 200W Box Mod

$7.90 YiHi SXmini Mi Class Pod System Kit 400mAh

$18.90 Vape Master & Wotofo Flux 200W Box Mod

$84.40 AsMODus Lustro 200W Stabilized Wood Mod Relic Edition

Product introduction
Geekvape Mero Aio kit has Stylish and simplistic appearance, with Geekvape B Series Coil to meet your flavor expectations, and a large built-in 2100mAh battery with USB Type-C for longer battery life, faster and easier charging experience.It is an all-in-one kit and is easy to handle and also has the luxury of being ultra-nomadic.On the top of the Mero Aio GeekVape is a 3ml cartridge equipped with top fill.

Parameters:
Dimensions: 23mm x 81.6mm
Resistance Range:0.2-3ohm
Resistance: Geekvape B Series Coil 0.4ohm(25-33W)
Geekvape B Series Coil 0.6ohm(15-25W)
Battery: built-in 2000 mah battery
Power output: 3.2V/3.5V/3.8V
Max Output Voltage: 4.2V
Charging: TYPE-C 5V 1.5A
Filling Type:Top Filling
Drip Tip: 510
Longest Vaping time:10s
Airflow:Adjustable

Features:
-Adjustable airflow intake for both MTL or DTL flavor chasing
-Long-lasting battery with USB Type-C
-510 connector - Pick your favorite tank
-Three Power Output Adjustment to meet all your demand.
-Perfectly compatible with all upcoming Geekvape B series coils

Package includes:
1 x Mero Aio Kit
1 x Geekvape B series coil(0.4ohm 25-33W)
1 x USB-C cable
1 x user manual
1 x Warranty card
1 x Coil Tool

Product introduction
VOOPOO Argus Pro 80W Pod Mod Kit powered by integrated 3000mAh Battery with wattage output Range of 5-80W.Featuring the GENE.TT Chipset, various output modes, and compatibility with the PnP Coil Series.Type-C USB Port for fast charging and firmware updates, while at the top is a magnetic connection for PnP Pod and coils of the MTL or DTL variety.It is made of Zinc-Alloy, ergonomically fitting within the hand, the Argus Pro can be brought around safely using the lanyard attachment point.

Parameters:
Size:124mm x 35mm x 31mm
Battery: 3000mAh Battery integrated
Capacity: 4.5ml
Mod Material: Zinc Alloy
Resistance Range: 0.1-3.0ohm
Wattage Output Range: 5-80W
Voltage Output Range: 3.2-4.2V
Chipset:GENE.TT Chipset
Screen:OLED Display Screen

Features:
-4.5ml Large E-juice Capacity
-Zinc-Alloy Chassis Construction
-Bottom Fill System
-Magnetic Pod Connection
-Dual Slotted Sliding Airflow Adjustment
-Double Ignition Mode/Smart Mode/RBA Mode/Manual Mode
-OLED Display Screen
-Press-Fit Coil Installation
-Single Firing Button

Package includes:
1 x Argus PRO Pod Mod
1 x 4.5mL PnP Pod
1 x Silicone Pod Sleeve
1 x 0.3ohm PnP-VM1 Coil
1 x 0.15ohm PnP-VM6 Coil
1 x MicroUSB Cable
1 x User Manual