Product introduction
SMOK Thallo Pod Mod Kit powered by integrated 3000mah battey, holds of 5ml capacity,provides fast charge VIA a type-c port,decorated with a leather matching,the brand-new IQ-XS chip accompanies the 80W max output,instant 0.0001s firing time and multiple safety protections,Reshuffles the standard pod mod series with extender standby time and heightened happiness when you are vaping.Dual applicable pod(RPM 2& RPM) for doubled experience,sold separately.There are 2 types coils included,RPM 2 Mesh 0.16ohm and RPM 2 DC 0.6ohm MTL,respectively focus on producing a plumper taste and tight flavor.DIY the airflow to expose more or less space of the air slot on either side to strengthen or weaken the flavor to suit your taste preference.

Parameters:
Size: 123.65 x 37.7 x 30mm
Capacity: 5ml
Battery: 3000mah built-in
Output Voltage: 0.8-4.0V
Input Voltage:3.3-4.2V
Standby current: <100uA
Overcharge voltage: 4.3±0.05V
Overcharge current: 2±0.6A
Overdischarge voltage: 2.4±0.05V
Power Range: 1-80W
Charging Current: Max 1.2A
Resistance Range: 0.15-2.5ohm
Resistance: Mesh 0.16ohm(25-50W,Best:40W)
DC 0.6ohm MTL(12-25W)

Features:
-Metal matching leather with the dreamy fluid patterns
-Powered by integrated 3000mah battey with the 80W max output
-Provides fast charge VIA a type-c port
-Driven by brand-new IQ-XS chip,instant 0.0001s firing time
-RPM 2 Mesh 0.16ohm and RPM 2 DC 0.6ohm MTL,respectively focus on producing a plumper taste
-DIY the airflow
-Dual applicable pod for doubled experience
-5 protections guard a realiable vaping

Package includes:
1 x SMOK Thallo device(3000mah)
1 x SMOK Thallo RPM 2 Pod(5ml)
1 x RPM 2 Mesh 0.16ohm coil
1 x RPM 2 DC 0.6ohm MTL coil
1 x Type-c Cable
1 x User Manual

Hi, guys! Welcome to New Product Introduction! I have a question: do you need an RDA at present? Today let me introduce you one RDA named Augvape DRUGA 2 BF RDA . Now let’s take a closer look at the RDA below.
The Original Augvape DRUGA 2 24mm RDA, featuring revised Clamp Snag System build deck bundled in a visually striking aesthetic. Constructed from superior 304 Stainless steel, the chassis is well constructed and visually striking. Implemented within the build deck is an upgraded clamp snag system to maintain ease of building, accommodating a single or dual coil configuration. In addition, the top cap features a dual sided airflow control, offering control over airflow intake. At the bottom is a threaded 510 connection to facilitate connectivity through a swappable gold plated pin or bottom feeder squonk pin, allowing e-Juice to travel through the bottom from your favorite squonk mod


Main Features:
510 Threading Connection - Gold Plated Contact Pin
Deep Juice Wells
Superior 304 Stainless Steel Construction
Upgraded Clamp Snag System
Gold Plated Build Deck Posts
Single or Dual Coil Configuration
PEEK Insulator
Dual Sectioned Airflow Control Top Cap
810 Wide bore Drip Tip
Gold-Plated BF Squonk Pin
Diameter: 24mm510 Threading Connection - Gold Plated Contact Pin
Deep Juice Wells
Superior 304 Stainless Steel Construction
Upgraded Clamp Snag System
Gold Plated Build Deck Posts
Single or Dual Coil Configuration
PEEK Insulator
Dual Sectioned Airflow Control Top Cap
810 Wide bore Drip Tip
Gold-Plated BF Squonk Pin
Diameter: 24mm
If you want to get one, you can come here:
Augvape DRUGA 2 BF RDA >>>
Recommended Squonk Mod:
Vandy Vape Pulse V2 Squonk Box Mod 95W >>>

The IJOY Aria Pod kit is a handbag-shaped device with an ultra-portable design. It has a transparent ink cartridge and can easily check the electronic liquid level in real time. There are two types of coil resistance built in the box, suitable for DL/MTL atomization.

Main Features:
1. Transparent Cartridge for easily checking e-liquid levels in real-time
2. Prebuilt coil with 2 resistances(0.6/1.0Ω), suitable for DL/MTL vaping
3. 900mAh Built-in Battery & 3 output voltages for option
4. Univ.mini chipset with IFTT, easy operation and best flavor
5. Made of zinc alloy+PCTG material, ultra portable design

Equipped with Univ.mini chipset and IFTT (IJoyLAB flavor testing technology), it can bring you easy operation and the best flavor. There are 3 output voltages to choose from. In addition, the iJoy vape pod kit is made of zinc alloy + PCTG material, which is durable and lightweight.

The IJOY vape Aria Pod Kit is powered by 900mAh inbuilt battery with 22W output. Featuring 3ml IJOY Aria Pod with 0.6ohm/1.0ohm coil, the IJOY Aria Pod Kit will bring you a amazing taste.

Related pod we recommend:
voopoo rta pod review
vaporesso barr kit review

Freemax Twister 80W, one of the best starter kits in early 2019, and now Freemax released a new Twister 30Wwith a brand new tank. Why they lower the wattage to 30W, what are the differences between the Twister 80W and 30W? We will give you the answer in this post.



These two products are all arms with some similar apperance, material on both device are made from stainess steel. Looks similarlly to each others right? But What’s different? Through reading following content, you will find out the details.



Differnces:

• Twister 80W came with a Mesh subohm tank, which is for cloud chasing;
• Twister 30W comes with a Fireluke 22 tank with 2 MTL coils, it is a friendly pen kit for starters & ex-smokers. This is also the main reason why they released a 30W kit.

Previously we have shared another post to show the differences between Freemax Fireluke 3 and Freemax M Pro 2. Check this post to see the itty-bitty differences between those two Freemax’s tanks.

Anyone tried e-liq bases for DIY?
E-Liquid Base 1 Gallon

The dual-coil version of the 'ancient' Wasp Nano RDA. The whole profile design still remains the same as the previous one. The transparent top cap section and stainless steel base both smells familiar. But it can offer a dual-coil configuration for bigger vapor production and denser flavor delivery. 510 drip tip is replaceable and airflow is adjustable via turning the top cap around to cut down four airflow inlets(each side has two slots). All in all, the Oumier Wasp Nano S is still an easy Rebuildable Dripping Atomizer.

Don't forget to use Coupon (PD12) before completing your order!

Click here if interested: Oumier Wasp Nano S 25mm BF RDA

We're looking for Vape Wholesale partners eagerly. Join us here: Vape Wholesale Supply, Vape Wholesale China - AVE40

Welcome you, vendors, to view our catalog online and navigate through the process for Vape Wholesale, set up your wholesale account, or drop us an email to info@ave40.com first

Hello guys, do you want a giveaway? If yes, what do you want? How about the rules? How many winners? Tell me your thoughts.

Recently VOOPOO adds a new member into its popular Drag family, called Drag Max, which is an elegant,luxurious, powerful and intelligent kit. Powered by dual 18650 batteries, it can fire up to 177W output to provide long standby energy. The newly upgraded GENE.FAN 2.0 chip provides more stable output and richer intelligent functions than the previous generation. It supports dual UI theme interfaces, RBA & smart modes, keeping vaping fun and professional. With the special magnetic function, VOOPOO PnP tank makes ejuice refilling and coil change super easy. It's equipped with dedicated coils, PnP-VM5 0.2ohm and PnP-VM6 0.15ohm for impressive flavor and huge clouds. Moreover, you can have a versatile and fantastic vaping experience with all Pnp coils on the VOOPOO Pnp tank.



To enter:

Play word chain: comment one word and the word should be related to Vaping. One word per post and the word has to begin with the last letter of the previous word commented.

Example:
VOOPOO Drag Max Kit
Think vape
Eleaf

If you draw a blank then post
‘VOOPOO Drag Max Kit’
Next post will start with Letter ‘T’

Note:
1.We will pick 2 lucky testers via random.org on September 30, 2020.
2.Each participant can post 8 times at most; number your entry, for instance: #Post 1.
-----------------------------------------
Tester Announcement

Dear all,

Thanks for your active participation and supports.

Congratulations #61 @mac63 & #330 @Aruones



Please PM us your shipping address in following format.

Name:
Address:
City:
State:
Post code:
Country:
Tel & Email:

Note: Chinese National Day is coming! We’ll have a long holiday from Oct 1 ~ Oct 8. So your prize will be shipped out after Oct 8. Hope you don’t mind it.

After receiving the product, please share your real feeling and user experience with other vaping friends here or any of your account such as Facebook, Instagram or Twitter.

If you have interests, you can also pick one from
https://www.heavengifts.com/product/VOOPOO-DRAG-Max-Kit-with-PNP-Tank.html

Product introduction
Smok SCAR-P3 Kit is a waterproof, shockproof, dustproof pod kit. It is powered by an internal 2000mAh battery and can be charged by the convenient type-C charge port. Equipped with the advanced IQ-80 Chipset, Smok SCAR-P3 has enhanced the performance which will be a more stable output and has all-round protection.

Parameters:
Size: 27x 32.3x 110mm
Pod capacity: 5.5ml
Output wattage: 5-80W
Charge: USB Type-C port
Output wattage: 0.5-4.0V
Resistance range: 0.2-2.5ohm
Screen: 0.96 inch TFT display
Battery: Built-in 2000mAh battery

Features:
-5w to 80w adjustable power
-Convenient type-C charge port
-Sophisticated design in and out
-Waterproof, shockproof, dustproof
-IQ-80 Chipset for enhanced performance

Package includes:
1x Smok SCAR-P3 Device
1x Scar-P3 RPM 2 pod
1x Scar-P3 RPM pod
1x USB charge cable
1x User manual

Have you got one Freemax Twister 30W Vape Pen Kit in hand? Freemax Twister 30W consists of Fireluke 22 Tank and Twister 30W VW mod, designed for both DTL and MTL vaping needs with 0.5ohm DTL Mesh Coil and 1.0ohm & 1.5ohm MTL Mesh Coil available. So how do you like this vape pen kit?

And do you know how to change the glass tube of Twister 30W? Now let’s watch the video on how to take the glass off Fireluke 22 tank below:
Login to view embedded media
If you want to know more pictures about Freemax Twister 30W, please feel free to check our official Facebook, Instagram, Twitter, Pinterest page.

The FORZ TX80 has so many impressive moments waiting for you to explore,you can pre-order it on our official website.

hi , my eng is very bad sorry pls
My voopoo vmate battery issue , who know how to fix ?

OBS Cube-S Box Mod 80W

The box was sent to me by Sourcemore for a review, thank you.

The "S" becomes part of the Cube family, this is a single Battery Mod that delivers a rated power from 5 to 80 W.
It is powered by a single 18650 cell and adopts an upgraded and more stable chipset than in the past, the delivery speed is lightning fast, only 0.001s.

The 0.96 "OLED screen allows you to easily read the parameters of the device and the multiple protections guarantee a safe vaping experience.

Enjoy the reading.



The cardboard packaging shows on the front, the name of the Brand, the name of the product and shows two different profiles of the Mod.



On the back there are the contents, the main features, some warnings, the manufacturer's addresses and the inevitable logos & brands.



On the side we find the scratch & check, the QR-Code with the invitation to check the originality of the product on the OBS website, the color indication of this sample and two "social" QR-Codes.





Content:
1 x OBS Cube-S Mod 80W
1 x Type-C Cable
1 x User Manual
1 x Warning Card



Specifications:
Material: Leather + Zinc Alloy
Dimensions: 86x28x34 mm
Weight: 120.5g
Wattage range: 5-80W
Battery: Single 18650 (not included)
Screen: 0.96 inch OLED
Charging Port: Type-C.
Charging current: 4.2V / 2A.
Standby current: ＜ 45uA
Output voltage: 3.2V-4.25V.
Resistance range: 0.1-3Ω





Colors:
Black blue, classic black, black red, black brown, blue red, camouflage blue



The new Cube-S is designed to be ergonomic, has a compact body, is smooth and comfortable without sharp edges, the frame is made of zinc alloy, the removable panel is made of plastic material covered in leather.

The palm of the hand directly touches the leather surface which provides good tactile feedback. The materials used make the device beautiful and durable, resistant to scratches and sweat.

My Sample uses two different colors for the leather insert, the brown part bears the hot-branded Cube-s writing.

Hello everibody!!! How is everything?

Hi everyone,, so I recently had a heart attack and 2 stents put in,, I know I have to quit smoking but I am struggling with this, it's so much harder than I thought.

After doing some research on all the different ways to quit,, I decided that I believe vaping will truly help me finally break the cigarette habit.

I joined this site in hope to get some advice on how to get started with vaping. There seems to be so many different types of devices, juices, accessories,, it's just so overwhelming for a newbie.

I am looking for an easy to use starter kit, preferably a pen with a charger that doesn't have a bunch of different components to put it together, I don't want nicotine, just a light fruity taste, easy to refill with different types of juices, something that is re chargeable, not a throw away, something that is larger than a regular cigarette, but no so large that it's heavy to hold, something that I can easily travel with and looks elegant.

Anyways, nice to meet you all, glad to have found this site and hope to get some great advice and ideas on how to go about starting out new to vaping.

Thanks for listening and have a great day.

One for the science minded geeks that I know patrol these shores.

Why doesn't the thermionic effect short circuit a domestic light bulb?

Electrons produced by the filament should be drawn directly to its positive terminal. Why doesn't this current flow draw power away from the anode or short circuit the filament completely?

The thermionic effect was rediscovered by Edision in 1880 while investigating filament breakage and anode darkening in his incandescent bulbs. He promptly patented it.
Thermionic emission - Wikipedia

A modern tungsten filament is definitely boiling off electrons as it's work function is well below the 2500 centigrade that modern filaments run at. Modern light bulbs do not seem to suffer from this effect, but Edison's did.

Is it that the anode/cathode potential is too low in a modern light bulb compared to Edision's to produce the a sufficient current flow to significant? I've tried googling the hell out of this, and despite increasing my knowledge of the associated technology I can't find an answer.

I was a long-time ECF member but kind of drifted away a few years back. Still vaping (8+ years) and not smoking! All the anti-vaping stuff going on got me more re-involved.

hiya,

My first review for a Wotofo product, the Profile RDTA, which was sent to me for the purpose of this review.







Earlier versions of the Profile, for example the Unity, are very popular RTA's/RDA's. This is the first RDTA in the Profile productline. What makes it special is that it can be both used as an RDTA or RDA, and maybe even more special is the fact that the deck is versatile, you can have dual, single and mesh builds on the same deck.

Also it uses the metal rope wicking technology like on the well known Brunhilde RDTA.

Let's begin with some specifications:






What I got in the box:

Profile RDTA x1
nexMESH Clapton Ni80+A1 0.20 ohms x1
nexMESH Extreme A1 0.16 ohms x1
nexMESH Turbo A1 0.13 ohms x1
Framed Staple Clapton Ni80 0.33 ohms x2
6mm Thick Cotton Strip x2
3mm Thick Cotton Strip x2
Stainless Steel Wick x6 (4 pre-installed + 2 spares)
Mesh Bending Tool x1
RDA Adapter x1
Cross Head Screwdriver x1
Allen Key x1
Accessory Bag x1
User Manual x1




Review:

Have to start by saying there is a lot of goodies in the packaging, 3 mesh strips is a lot and it allows for quite some vaping pleasure.

I was sent two color options, black and stainless steel. Both very beautiful tanks with a nice colored drip-tip. Personally, I like the black more because it just matches my Aegis X perfectly.



It is quite a tall tank, but on a dual mod it doesn't bother me at all. It being not so wide (25mm) makes it fit on many mods.






The design is interesting basically having an RDA on top of a RDTA tank. It takes seconds to convert the RDTA into an RDA with the included RDA base, nice. Generally taking the whole tank apart is easy and doesn’t need much force.




Interesting fill system, just pull of the top-cap and fill it through the fill hole on the base of the deck, very comfortable. But it has its minuses, you cannot leave the tank sideways (like an RDA) cause all liquid will flood out, had it once. That is probably because the metal wicking wires are on the loose side. Also, the fill hole is quite small, had trouble with larger tip bottles. Would have been nice if a special fill-pin or something of that sort was included. The tiny hole on the opposite side makes sure that there are no air bubbles while filling.



Glass tube is well protected in the frame, not to worry about breaking it really. Its 6.2ml capacity is more than enough for me.

Airflow is adjustable with the mechanism on the top cap, when its dry its hard to turn, but it gets better overtime. With the honeycomb design you can precisely adjust airflow, also while turning there is an option to only cover the top row of inlets. It is for sure the smoothest airflow I have had from a rebuildable so far, it is very silent, and it is not whistling, close to a MTL tank it sounds.



Always was a bit skeptical about the stainless steel wicking wire concept, but with this tank I can confirm it actually wicks the cotton extremely well. No issues with chain vaping on both mesh and regular coil builds. It is possible to vape without the wires as well, the cotton will saturate in motion.

Love the build deck concept, no more separate purchasing of mesh and regular decks. For both mesh, single and dual coils it is easy to build on. I do however miss spring loaded mesh clamps, would have been nicer if they were spring loaded.



It vapes fantastically, to me it is RDA level if its about flavor. The new Clapton Mesh provides really amazing flavor, unfortunately I broke the strip as they are very delicate, you need to be careful. The other mesh strips also deliver great flavor. Did not experience any dry hits on mesh.



Both single and dual coil perform great on this deck as well. Love vaping this tank with a dual coil set up. If its about single coil, there is enough airflow options to get a restricted lung hit. A single 3mm coil performs well for me and delivers really good flavor.



Conclusion:

A nice versatile tank with the ability to use it as an RDTA and RDA. The Clapton mesh strip is really worth a try as it delivers a very flavorful and bit warmer vape compared to regular mesh.

Enjoy using this RDTA as a single, dual and mesh. The build deck is easy to use with its postless design and it is allowing for different build types is a major pro. Metal ropes saturate the cotton very well, no dry hits from this tank.

Incredibly smooth airflow makes it a joy to take a drag from this tank every time.

If there are any downsides worth mentioning it’s the fill port, it is too tiny in my opinion. Also the wicking ropes could have been tighter so that your tank won’t leak straight away if it does not stand up straight.

On the official Wotofo website the tank is available for 40$, Wotofo Profile RDTA

Thank you for reading.

Take care,

SP013

Product introduction
Stratum Balance Style 60W TC VW Box Mod powered by single 18350 / 18650 battery (not included),Long side by side version with 18650 battery or short version with 18350 battery,supports max. 60W output.Compatible with 24mm diameter vape atomizer.The activation button and the adjustment button are perfectly integrated into the attractive design and can be adjusted laterally.Stratum Balance Style is made from POM/PC and Stainless Steel.

Parameters:
Battery:18350 / 18650(not included)
Power Output:1-60W
Display: 0.91"
Thread Type: 510
Input Current: 0.5A-30A
Output Voltage: 0.5V-8V
Resistance: 0.1ohm-3.0ohm
Coil Material Supported: Ni / SS / Ti
Efficiency: 91%
Temperature control range: 100'C-315'C / 200'F-600'F

Features:
-Powered by 1 x 18350 / 18650 battery (battery not included)
-Compatible with 24mm diameter atomizer
-Made from POM/PC and Stainless Steel.

Package includes:
1 x Stratum Balance Style 60W Box Mod

Hi, guys! Welcome to New Product Introduction! I have a question: do you need an RTA? Today let me introduce you one RTA named ShenRay VG Extreme V2 RTA Clone. Now let’s take a closer look at the RTA below.
The ShenRay VG Extreme V2 RTA Rebuildable Tank Vape Atomizer Clone is in 23mm diameter and holds 6.5ml capacity. The ShenRay VG Extreme V2 RTA Clone supports dual / single coil building and DL / RDL / MTL Vape. The airflow control is adjustable via Air Pins, Winding is supplied air from three sides (frontal, bottom, diagonal top).

Main Features:
510 threading connection
Dual coil or Single coil
6.5ml filling capacity
Chamber reduction for single coil
810 MTL and DL stainless steel Drip Tip included
Air supply adjustable via Air Pins
Liquid transport via 4 stainless steel ropes
Winding is supplied with air from three sides (frontal, bottom, diagonal top)
high-quality stainless steel construction
DL / RDL / MTL
Diameter: 23mm
If you want to get one, you can come here:
ShenRay VG Extreme V2 RTA Clone >>>

You can regard the Voopoo Drag Max Kit as a dual-battery version of the previous Voopoo Drag X/Voopoo Drag S that adopts a pair of 18650 batteries to offer a maximum output of 177w. And it's also compatible with Voopoo's proprietary PnP Pod Platform which includes a regular pod tank, PnP MTL pod, and RTA pod. Most importantly, all PnP coils included RBA coil are workable on this Max kit.


Don't forget to use Coupon (PD12) before completing your order!

Click here if interested: Voopoo Drag Max 177W Vape Starter Kit

We're looking for Vape Wholesale partners eagerly. Join us here: Vape Wholesale Supply, Vape Wholesale China - AVE40

Welcome you, vendors, to view our catalog online and navigate through the process for Vape Wholesale, set up your wholesale account, or drop us an email to info@ave40.com first

Hi, guys! Welcome to New Product Introduction! I have a question: do you need a DL RTA? Today let me introduce you one RTA named YFTK Monarchy J3S DL RTA Clone . Now let’s take a closer look at the RTA below.
The YFTK Monarchy Monarch J3S RTA Rebuildable Tank Vape Atomizer Clone is made from 316 Stainless Steel and PCTG tank with 22mm diameter and holds 2.5ml capacity. The YFTK Monarch J3S RTA Clone is with single coil deck and bottom airflow control. The RTA supports DL Vaping.


Main Features:
510 threading connection
PEEK drip tip
316 stainless steel construction
PCTG Tank Capacity: 2.5ml
Single coil deck
Bottom airflow adjustable
Diameter: 22mm
If you want to get one, you can come here:
YFTK Monarchy J3S DL RTA Clone >>>
Replacement Air Insert:
YFTK Monarchy J3S Replacement Air Insert(3 PCS) >>>
Replacement Drip Tip:
YFTK Monarchy J3S Replacement Drip Tip Set >>>

Hi, guys! Welcome to New Product Introduction! I have a question: do you need an RTA? Today let me introduce you one RTA named Innokin Ares 2 D24 LE MTL RTA. Now let’s take a closer look at the RTA below.
The Innokin Ares 2 D24 LE MTL RTA Tank Vape Atomizer is a limited edition. The new ARES 2 LE is with a particularly elegant appearance thanks to its sandblasted matt surface. Thus the ARES 2 LE looks more modern and in connection with the tank even more elegant. The branding of the bell was revised and had to make room for the embossing "ARES-2 LE". Innokin has used a slide mechanism for easy filling, which means that the top cap can be easily moved to the side. The existing Cross-Airflow-Control (CAFC) allows the air intake below the coil to be regulated in 5 stages without having to adjust screws or inserts.

Main Features:
Diameter: 24mm
Drip tip: 510 Drip tip
Connection: 510 thread
Tank Capacity: 4.0ml
Fill: Slide-open top-fill
Coil build: Single coil build
Adjustable bottom airflow control
Leak-proof slide open top filling method
Bell-shaped chamber to prevent loss of taste
Drop-in coil sky build deck for easy single coil build
If you want to get one, you can come here:
Innokin Ares 2 D24 LE MTL RTA - Silver >>>
Innokin Ares 2 D24 LE MTL RTA - Black >>>

Good Morning/afternoon/evening where ever you reside friends.
I'm new to the forums so please excuse me if i have posted in the wrong section.
I switched from the smok morph 2019 kit to the aegis x zeus kit hoping it was an upgrade,
But the zeus tank coils are burning out so quick is this normal? a coil will last me a day, I still have my Mini V2 so i put the same juice in both tanks to see if it was the juice causing this, the mini v2 had to be changed after 1 week, the zeus coil started getting the burnt taste at the end of day 1, i then changed liquid to a less sweeter and from 70vg to 60vg and still the same problem.
I use the 0.2 mesh z2 coils vaping at 75 watts, the mini v2 i use the A1 coils vaping at 100 watts.
To prime the coils i soak the oil for 15 minutes and start vaping at 40 watts after the 15 minutes and build it up to the required wattage.
I was thinking of either sending the full kit back or buying a new tank the valyrian 2 but then again i would be taking another chance as i have never used this tank and could end up with the same problem as i have now.
I have seen the same issue with these coils on reddit posts but never a solution.
After reaching out to one of the users who had the same issue a few months back his reply was - "My only guess is the coils and tank setup just suck. I'm no longer using the aegis x for that reason"
I have contacted geekvape for their input and they just told me how to prime coils.

any suggestions would be great.

Geekvape just released a brand new AEGIS HERO few days ago, and everybody is asking what makes it special compared to other Geekvape pod systems. In this post, we will have a detailed comparison between the brand new AEGIS HERO and the AEGIS BOOST.





Another big difference is the airflow system:

• Aegis Boost – the airflow was controlled by a knob at the side of the cartridge, this is a same story like bottom airflow, leaking problem cannot be avoid;
• Aegis Hero – completely top airflow to avoid leaking issue, while you may also lose some flavor, same story like a top airflow subohm tank.

...

Please view the whole GeekVape AEGIS HERO VS AEGIS BOOST here.