So I've been vaping since 2013 when I was able to kick the cigs to the curb. My go to had been The Vapor Room's house brand strawberries and cream( 70vg/30pg 3 mg) , one of the few e-liquids that doesn't make me wheeze. Since they stopped making it, due to the ridiculous costs of the PTMAs I have tried Naked 100-didn't care for their juice, Vapestasia strawberry parfait- meh, and Beard the one (some kind of strawberry donut) which I didn't like at all. Anything with custard is too strong and gives me a tight chest. I experimented with DIY about a year and a half back because of this regulation possibility, and I followed recipies and downloaded a juice calculator (e-juice me up, I believe), but my diy mixes were just awful. Any suggestions for a good strawberries and cream juice? Nothing with cheesecake, though- I love the flavor, but it makes me wheeze. Thanks for any advice you can give.

Hello friends. My name is Batuhan and I am 30 years old. As you can see from my nick, I'm an Alfred Hitchcock fan.

I have been using electronic cigarettes for 1.5 years and like most users, I started as a DL. I have been an MTL user for 1 year. The atomizers I am currently using are Spica Pro, Penodat, Troy 1x v3 RDA, Troy lv2, IDA RDA produced in my country (although it is prohibited).

My English is not good at all. I can even write to you right now thanks to Google Translate. In this forum, I will use tips on how to improve my English and order from abroad to a country where electronic cigarettes are prohibited. I want to know what to do so that my order is not blocked.

Hi everyone again.

This is basically my wish list. Always hunting for any of the above...

Also would kill for an ambermods spotmod.

I am a native Georgian living 1 hour north of Atlanta. I am a graduate from Georgia State University and a graduate from the Emory
Medical school with a 3rd degree in Emergency medical technician, and a Paramedic. I feel genuinely blessed to have
found a degree and career that I absolutely
feel passionate about. Single guy with two
loving Dobermans.

Hi everyone

My name is Leisl. I've been vaping for around 4 years and love it. I mostly use RTA's and regulated mods. I also dabble in e-liquid DIY with my favourite profiles being fruits on ice.

I look forward to getting to know you all.

The Lost Vape Ursa Quest is a jack of all trades, a pod, AIO, PodMod and a full out mod. The options this kit comes out fo the box with is staggering and makes the Lost Vape Ursa Quest one of those few times that a kit can grow with the vaper from the beginning (pod) through to advanced (RBA for the tank conversion. The big question is, have they sacrificed anything to make this a jack of all trades?

═╣ Lost Vape Ursa Quest ╠═

00:00 ◄ Intro and specs
02:15 ◄ Close up
18:49 ◄ Temp Control & Wattage Vape
27:19 ◄ Thoughts


Login to view embedded media

Hey everyone,

I’ve had the DOVPO x Vaping Bogan BLOTTO RTA for a few months now, and I love building on it and vaping on it. However some reason I can’t get it to stop leaking.

Could it just be bad o rings? I feel like I’ve reseated them dozens of times, but after I clean it all up, I’ll get a few good draws off it and then juice comes right out of the bottom air flow.

Guys, I just started in the world of vape. I use a Luxe 2 with the tank that comes in it equipped with the GT coil head. I was satisfied with the taste, but studying hard I decided to go for an RTA tank. I researched one that fit what I was looking for and arrived at Kylin V2.

My problem is not the leak that they talk about so much, but the fact that it gives me a lot less flavor than the GT coils I used.

I made the wick with dual coil. And I already did 3 rewick, one putting less cotton in the lower tank, another putting more and nothing. I am frustrated because my expectation was that the flavor would be more present in an RTA than in a tank with a coil head. Can anyone help?

(I'm brasilian using Google translator, sorry)

Its still firing, doesnt seem to be a battery issue, i did drop it this morning, but these mods are meant to be very durable, anyone had this issue?

Digiflavor has not released any devices since the beginning of 2019. What is surprising is the sudden appearance of the company in the information field, even with such outstanding novelty, by the way, there is little information about it at the moment, but in this article In the further content of, we will tell you everything we managed to learn - Z1 SBS Kit.

Specifications:
Output Power: 80W
Power supply: 1 * 18650
Charging: USB Type-C
Modes: VW / VV / BYPASS
Tank type: MTL
Bottom airflow
Top filling
One spiral base

The Digiflavor Z1 SBS Kit is not aimed at beginners at all, as is often the case, but at experienced vapers who prefer a cigarette puff. The Kit consists of the box mod of the same name, and also, suddenly, of the Siren 3 GTA tank . The dimensions of none of these devices have not yet been specified, but four color options are presented, for which stabilized wood inserts are used.

Siren 3 GTA will not change the tradition, retaining all the basic design solutions of the previous version. The atomizer can only accommodate one vape coil, and the bottom airflow will consist of three small holes on the base. It is recommended to use the lower ring to adjust the tightness of the tightening. The user can open multiple holes at a time, or open one hole at a time.

Related kits you may prefer:
lost vape ursa quest multi review
oumier blade mod review

Hey guys. Have you ever heard of the vape brand "ThunderHead Creations"? This time we'll be covering their latest Tauren MTL RTA, you may try it out if you like MTL vaping.

The Tauren MTL RTA by THC brings the MTL vape revolution with its innovative airflow system design and multiple optimized features. It is made of high-quality stainless steel, with a hollowing out glass shell design with a diameter of 24mm and a capacity of 2ml. Equipped with a replaceable long or short 510 drip tip and a standard 510 connector, it is quite suitable for MTL and restrictive DL vaping. The Tauren MTL RTA can be top filled through the threaded top cap's dual fill ports. And, it is equipped with a brand new honeycomb build deck, provide spacious build space for a single coil. The 61 miniature honeycomb air holes in the center of the deck directly hit the coil in the small chamber, bringing you first-class flavor.

Coupled with the optimized curved internal airflow channel design, air flows enter the bottom airflow ring slotted first, flow gently through the honeycomb holes of the deck, and evenly pass through the coil. The Tauren MTL RTA also adopts a long-distance surround airflow channel design, with double inner domes, completely facing the flavor. The airflow ring is one of the most interesting designs. Moreover, this RTA uses an innovative 360° infinitely variable airflow control system. One side of the ring is completely closed, while the other side is a 6-hole grid. Between these two, as we move from side to side, the groove gets deeper and deeper. You can find the best airflow setting according to your preferences, whether it is MTL or RDL. Infinitely adjustable.

You may also like:
smok rigel kit price
lost vape gemini hybrid price

Freemax Maxus 50W with Fireluke 22 Tank Resin Edition is able to satisfy your DTL, RDL, and MTL different vaping needs, so is this the box mod kit you are always looking for? What’s more, Freemax Maxus 50W also has multiple colors for options: Green-black, Orange-yellow, Yellow-green, Black-blue, Red-orange, and Blue-red, so which is the most charming one?

Maxus 50W Kit is powered by a 2000mAh built-in battery with 2A fast charging, providing an all-day going power. The FM Chip with multiple output modes and smart coil detection function make Maxus 50W one of the best box mod kits in the vape market.



For more information about more Freemax box mod kits, please enter Freemax official website>> Freemax - Taste the Clouds, Feel the Flavors!

I bought a used Rex and it came with a Uforce Tank and was looking online and see there are Triple Mesh coils and Quadruple Mesh coils and Sextuple Mesh coils and Octuple Mesh coils, and the question is does the more of the Mesh coils increase the flavor or increase clouds or both, I ask cause I use Triple Mesh coils in my MAAT Tanks and thats the most they make for the MAAT Tanks, I wanted to ask before I bought some new coils

Specially designed for vape starter, Aspire Onixx kit is born with the desire to help you get away from smoking and step into vaping. All you need, Onixx is enough. Onixx kit succeeds but upgrades the popular BP80 appearance design with upholstered soft leather and metallic zinc alloy. Combining of softness and hardness makes Onixx give you not only strong visual impact at first sight, but also a great and comfortable hand feel. Onixx mod with 2000 mAh built-in battery in such a small size, and equipped with Type-C quick charging, you can get stable power and optimized performance anytime and anywhere. Onixx Tank is equipped with BP coils, famous for outstanding flavor since born, and the compatibility of BP RBA in Onixx tank offers even more options for your vaping.

Key selling points/ Highlights:
1. Professional-grade Starter Kit
2. Replaceable 510 drip tip
3. Very easy top fill
4. Press-fit coil installation
5. Compatible with BP coils for great vapor and flavor production
7. Compatible with BP RBA
8. Comfortable and precise adjustable airflow
9. Big battery capacity: 2000 mAh
10. 1-40W adjustable output
11. ASP chipset safety protection

Hi everyone,

I am a new vaper in my mission to quit smoking. I just bought my first vape device- Smok Nfix last week and so far love it.Its so lightweight and portable and produces nice flavour.

Being a newbie I have a pretty silly question- the pod in the nfix is very easily refillable. But if i want to fill it with a different flavoured juice, how do i empty/ clean the juice which is already in it? Or do i need to vape the juice until it reaches minimum level and then add another flavour juice?

Very excited to join the forum and the vape community. Thanks in advance

The new ThunderHead Creations Tauren 24mm MTL RTA is a single-coil acceptable rebuildable tank atomizer that features an unprecedented 61 hole inner honeycomb airflow system to deliver an even airflow transportation to the coil and cotton. And it's also equipped with a 360-degree bottom airflow control system that can provide an accurate airflow control situation from all directions.


Don't forget to use Coupon (PD12) to get an extra 12% off!

Click here to check them out: ThunderHead Creations Tauren 24mm MTL RTA

We're looking for Vape Wholesale partners eagerly. Join us here: Vape Wholesale Supply, Vape Wholesale China - AVE40

Welcome you, vendors, to view our catalog online and navigate through the process for Vape Wholesale, set up your wholesale account, or drop us an email at info@ave40.com first

Lost Vape Ursa Quest Multi Kit

Ursa Quest Multi Kit is an amazing kit that flavorful like a sub-ohm tank, smaller like a pod mod and powerful like a box mod. It is closer to the original shiny color every time you use it with superior color-changeable leather. It comes with four series to fit your preference: Ukiran Leather Series, Crocodile Leather Series, Wood Series and Embossed Leather Series (please note that: for the Embossed Leather, the dark surface of the leather will gradually fade after using day-by-day then showing the original bright color). It can work with single 21700/20700/18650 battery and a 18650 battery adaptor is included in the package. Ursa Quest Multi supports Wattage, Voltage, TC, VPC, Bypass modes and has 5-100W power range. It is more stable than magnetic connection with innovative clip-on lock. It has two pod tank options: 7ml Ursa Pro Tank and 6ml Ursa Pod Tank. In addition, the pod features visible capacity, side refilling and wide airflow range (from all close to all open). Ursa Pro Pod Tank is compatible with UB Pro Coils: UB Pro P1 0.25ohm for DL, UB Pro P3 0.3ohm for DL, UB Pro RBA Deck for DIY. Ursa Pod Tank is compatible with UB Coils: UB M2 0.6ohm Coil for DL, UB M1 0.3ohm Coil for DL, UB M4 0.2ohm Coil for DL, UB M3 0.15ohm Coil for DL, UB 1.0ohm Coil for MTL, UB RBA Deck for DIY.


Details:

1. Superior color-changeable leather
2. Innovative clip-on lock, more stable than magnetic
3. Visible capacity and side refilling
4. Newest UB Pro Coil to bring amazing vaping
5. Wide airflow range: all close to all open
6. Powered by Single 21700/20700/18650 battery with 100W output
7. Five vape modes: Wattage, Voltage, TC, VPC and Bypass
8. Faster type-c charging
9. New generation of Quest Chip
10. Redefined 510 adapter
11. Two Pod Tank options: Ursa Pod Tank and Ursa Pro Pod Tank
12. Compatible with UB Pro Coils (with Ursa Pro Pod Tank)
13. Compatible with UB Coils (with Ursa Pod Tank)
14. Full-color TFT Screen





Rincoe Jellybox Mini 80W Mod

Jellybox Mini Mod is a lightweight and portable device for both starters and advanced users, it is comfortable to hold. Rincoe Jellybox Mini Mod is powered by replaceable 21700/20700/18650 battery and fires up to 80W of output power. Just pop up the bottom battery door and you can easily install the li-ion battery. It comes with 0.96-inch color display, so all vaping data including wattage adjustment and temperature variation can be easily and clearly showed on it. Rincoe Mod will bring you wonderful vaping experience.

Details:

1. Transparent PC cover with zinc alloy
2. Single 18650/20700/21700 battery, powerful 80W output
3. 0.96-inch colorful display screen shows vaping data
4. Quick Type-C charge port, 5V/2A
5. Innovative Rincoe chip for stable performance
6. 6 LED lights shine through the full device
7. 200-600°F temperature control, VW mode
8. 6 LED lights shine through the full device





Jellybox 228W Mod

Jellybox Mod is produced with transparent PC cover and zinc alloy frame, which make the mod durable and a visually stunning aesthetic. It is powered by dual 18650 batteries and can fire up to 228W max. Jellybox Mod is easy to remove and install cells. 6-LED-light design will shine through into the full device and light it up. Jellybox Mod supports VW/TC(NI/TI/SS) mode and you can adjust the mode you want. The mod can be charged fast and easy with type-c charging cable. Multiple protections are designed to ensure your safety.


Details:

1. Transparent PC cover and zinc alloy frame
2. Powered by dual 18650 batteries with 228W max
3. Features 6 LED lights
4. Type-c charging
5. Support VW/TC(NI/TI/SS) mode
6. Over-heating/Reverse Battery/Over-load/Over Short-circuit/10S Cut off/Low Voltage Protection





Jellybox Mini 80W Kit

Jellybox Mini Kit consists of a Jellybox Mini Box Mod and a Jellytank. The Box Mod is made by transparent PC cover and features zinc alloy frame, so it is a visually stunning aesthetic. There are trigger-style fire switch and adjustment buttons on the front edges. It is of great compatibility of battery and can work with single 18650/20700/21700 battery with 80W maximum power output. Jellybox Mini Kit has 6 LED lights shinning through into the full device. In addition, the screen UI color will match with the LED color, which make Jellybox Mini bright and beautiful. Jellybox Mini comes with 4.8ml Jellytank that is made by PCTG and stainless steel. It utilizes mesh coil 0.15 ohm to present the clear flavor and dense cloud.


Details:

1. Transparent PC cover and zinc alloy frame
2. Trigger-style fire switch and adjustment buttons
3. Supports single 18650/20700/21700 battery with 80W max power
4. 6 LED lights
5. Easy to remove and install battery
6. Type-C charging cable
7. 4.8ml transparent Jellytank
8. Multiple protections: Over-heating/Reverse Battery/Over-circuit/Short-circuit Protection/10S Cut-off/Low voltage Protection





OBS Pluck Kit

Pluck Starter Kit takes on an ergonomic, portable cylinder design, is a perfect starter kit with a simple control panel. Pluck transparent tank with top slide refilling also provides MTL & RDL vaping. OBS Pluck AIO Kit supplies an adjustable airflow ring with small holes that promotes a wonderful grip every time you vape. On the upper part of the mod is a small LED indicator clearly shows the battery life. With build-in 1500mAh battery, you can charge up quickly via the Type-C charging port. OBS Pod Mod Kit is constructed with zinc-alloy and leather, it adopts OM SK 1.0Ω regular coil & OM YE 0.4Ω mesh coil, which will bring you scrumptious vaping experience.

Details:

1. Ergonomic Zinc Alloy & Leather material, portable cylinder design
2. Built-in1500mAh battery, 5V/1A quick-charging capability
3. Adjustable airflow design
4. LED indicator shows 3 battery power of vaping data
5. Automatically setting the wattage 35/15W based on the coil
6. Transparent tank with top slide refilling
7. Suitable for MTL & RDL vaping
8. Compatible with OM SK 1.0Ω regular coil & OM YE 0.4Ω mesh coil

The AugVape Foxy One is a small single battery mod which takes a form factor we haven't seen for a while, a full (non-bracket) C-Frame mod. AugVape Foxy One could be a possible new mod for folks with arthritis or dexterity issues who have problems with normal battery doors.

═╣ AugVape Foxy One ╠═

00:00 ◄ Intro and specs
01:45 ◄ Close up
05:54 ◄ Temp Control & Wattage Vape
08:35 ◄ Thoughts


Login to view embedded media

The following are available for sale as one complete lot:
• One Uwell Caliburn (Grey) in sealed unopened box.
• Three Boxes of Uwell Caliburn 1.2 Ohm Koko Pods in sealed unopened boxes (12 Pods total).
• One Box Uwell Caliburn 1.4 Ohm Caliburn Pods. (4 Pods total)
• One Uwell Caliburn (Grey) - Used - in box including one 1.2 Ohm Koko Pod and charging cable. The Caliburn is in excellent condition.

Only $40.00 for the entire lot - includes free shipping via USPS mail with tracking (Continental US only).
Payments accepted through Verified PayPal payment only - to verified PayPal address.

Please shop at ejuice.deals, use code 20offeverything at checkout for a huge 20% discount sitewide.

Big savings on everything including:

Mystery eJuice Grab Bags from $5.60

20% off all Clearance Juices

GeekVape Kits and Tanks