temperature control

Hello, I'm using the Wye with temperature control, unfortunately it doesn't always work very well. I have no problems whatsoever if I use SS316, but with Ni200, it consistently shows about 0.01 Ohm less resistance, and while that may not sound like much, it makes quite big difference. I have to...

Imgur version of post, here: The above is the first of 7 charts/states tested and does not represent overall performance - follow link for full report and analysis, or the TLDR summary. See a full list of mods tested so far, at the end for comparison. TLDR: One has to conclude that the older...

See imgur.com/a/5KlI6TJ for a full set of charts, results and test analysis. Attached is one of half a dozen tests/charts for this mod, just as an example. TLDR: This mod doesnt do a good job of protecting against dry h its with the stock SS profile and plenty of cotton singed during testing...

See imgur.com/a/5KlI6TJ for a full set of charts, results and test analysis. TLDR: This mod doesnt do a good job of protecting against dry hits with the stock SS profile and plenty of cotton singed during testing, especially at low resistances - only once did I see the "No liquid" message...

See imgur.com/a/Yem5bdF for the full set of charts, results and tests. TLDR: These are hands down the best out of the box results I have seen from from a cheaper mod so far. Compare the result to the DNA 75 and its not too far off in most states imgur.com/a/7Pe3Gad. You could argue this is...

See imgur.com/a/Yem5bdF for the full set of charts, results and tests, the attached is the one of 7 tests/states/charts. TLDR: These are hands down the best out of the box results I have seen from from a cheaper mod so far. Compare the result to the DNA 75 and its not too far off in most states...

Imgur version of post with all charts and analysis here: imgur.com/a/vc6hvEr Eleaft iStick Pico 75 - TC bang for buck that is remarkable - Temperature Control Testing ResultsArctic Fox Firmware 190624 Stock SS316 Profile : Vaping The attached is the first of 7 charts/states tested and does not...

Please refer to my test results posted yesterday, I think you can get a GREAT reputation for temperature control if you issue a few firmware updates to some of your mods. A firmware update for TCR 75 for the Smok Mag will produce results that are as close to DNA temperature control as you could...

The results are in for the Smok Mag for SS temmperature control testing, and if you set the TCR to 75, you actually get a pretty damn good result. Its crazy, you can get the same result on a Smok XPriv Baby, with a TCR 88...Smoke, why isnt someone calibrating your devices before you send them...

The results are in for the Smok Mag for SS temmperature control testing, and if you set the TCR to 75, you actually get a pretty damn good result. Full charts, analysis and conclusions here: imgur.com/a/KQKCH1H (manually link, for some reason imgur links dont work on this forum) OR...

The results are in for the Smok Mag for SS temmperature control testing, and if you set the TCR to 75, you actually get a pretty damn good result. Full charts, analysis and conclusions here: imgur.com/a/KQKCH1H (manually link, for some reason imgur links dont work on this forum) OR...

Temperature control testing results are available for the DiCoDes Dani 25 using the stock SS profile, here: imgur.com/a/89GNaPJ or Temperature Control Testing Results: DiCoDes Dani25 tube mod (~$300 USD) : electronic_cigarette TLDR: This is a $400 AUD mod that doesnt produce a premium...

Temperature control testing results are available for the DiCoDes Dani 25 using the stock SS profile, here: imgur.com/a/89GNaPJ or Temperature Control Testing Results: DiCoDes Dani25 tube mod (~$300 USD) : electronic_cigarette TLDR: This is a $400 AUD mod that doesnt produce a premium...

Temperature Control Testing results for the DNA 75C board (Lostvape Paranormal) using the Steam Engine SS316L profile are available here: Temperature Control Testing Results: DNA 75C LostVape Paranormal Using Steam Engine SS316L Profile : Vaping OR imgur.com/a/EOL9hRE TLDR: You might expect...

Results of temperature control testing for the Vsticking VK530 may be found here: Temperature Control Testing Results: Vsticking VK530 (YiHi Sx530 board) - the cheaper cousin of the Sx Mini G Class : electronic_cigarette Or imgur.com/a/h3Km5Ht TLDR: This Vsticking VK530 mod is a more recent...

Apologies for the reddit links, but imgur links turn into blank black boxes for some reason. We have been undertaking a consistent set of tests to produce graphs of temperature and power behaviour of various mods in temperature control mode to work out which mods do what they say on the box. See...

Temperature control testing results for the YiHi Sx Mini G Class are now available here and there are some particularly interesting issues to discuss imho: imgur.com/a/os23png or Temperature Control Testing Results: YiHi Sx Mini G Class (YiHi SX550j board) : electronic_cigarette TLDR: This is...

Temperature control testing results for the YiHi Sx Mini G Class are now available here and there are some particularly interesting issues to discuss imho: imgur.com/a/os23png

imgur.com/a/1co2soH presents the results of temperature control testing for the vaporesso Gen.

imgur.com/a/1co2soH shows the results of temperature control testing for the vaporesso gen.