volt

What would be the equivalent of 10watts using a voltage mode only Digiflavor S Tube Mod? The options are: 3.1v 3.4v 3.7v I've only ever used wattage mode before and have no idea how to calculate Voltage mode. Thanks

Hello, I started to build my coils with steam engine application, I have found information about heat flux per watt, heat capacity and it helped me to build coils that suite me perfectly. the only thing that still gives headaches is current per volt value. I would be very grateful if someone...

I quit smoking with the help of Steel Jan and Smokeless Image a few years ago. Now with stress and quarantining I find I'm dying for a cigarette. So here I am. Couldn't help but notice everything has changed! I want to find something similar to my old Volts and clearimizers. Is it hopeless? Anyone?

I was using Smokeless Image products quite happily for some time and then they went out of business. The batteries I used were the larger Volt units, approx 100mm long with KR808D thread. I need to replace these as I have had them for some time. Does anyone know where I might get them? I...

Hello i am new here and any responses would be greatly appreciated. I am building a fully mechanical 21700 box today. I have everything figured out except the volt meter. I was wondering how to install it. Is it as simple as positive to positive and negative to negative? I do a decent amount of...

What is recommended , charge my 18650 batteries up to 4.2 v , or lower - like 4.0 to 4.1 volt for best possible life span ?

I stopped vaping a few years back after vaping since 2010 so i'm no newbie. I used a Lava Tube by Volcano with 5 volts and a CE 5 type cartomizer. No one speaks of e-cigs in terms of volts anymore and I'm kinda lost picking out a new system. I used a 3.0 ohm coil with between 4.5 to 5 volts so...

Hey guys! Right after the Proton Plex Kit, I'm gonna bring you a new box mod, which is the third version by Council of Vapor. Let's take a look. [Introduction] COV Mini Volt V2 Mod 40W looks same as the Mini Volt, but with some new features. Constructed by stainless steel, the mod presents an...

Hello vapers! The MiniVolt box mod will easily fit into the palm of your hand. It is one of the smallest mods on the market, but still packs a punch. You can easily take it wherever you go. with code:NP5D get 5% off Specifications: 1300mAh Battery Ultra-Compact Size Three Ramp Modes: Soft...

Hi guys i have a Snowwolf Vfeng and by pushing 2 buttons i can see the bettery status on each battery ! i have 2 pairs witch i always charge togather and use the same 2 togather but when i check status on both pairs like now the volt is 4.16 on 1 and 4.12 on 1 and the one that has 4.12 is tiny...

I just received this vape today from someone, so it isn’t new and It doesn’t have the original tank, I’m not sure exactly what tank it is but it’s from smok. I got home and tried to use it and it said No Atomizer, but it was working yesterday for the person I got it from so I’m not sure why it’s...

Hello! I am fairly new to vaping as far as wattage and TC is concerned. Just bought a Vaporesso Target Pro, did the software update and started vaping. Since I just bought it today everything seemed pretty fine but I realised the Volts might be a bit to high. On a 0.9 Ka cCell resistance with...

Hi there I use the volt Aspire ET Bottom Dual Coil Clearomizer tank with the volt spinner. My question is where can I buy just the coils from instead of buying new tanks each time mine is past its used by date, I did try ebay and got a pack of 5 and they fit but are a little longer and I can't...

Hi! So I have a bunch of Kanger T2 with 2.2 ohm coils (single top coil long wick). I found the specs and it says that the coil's recommended volt range is 3.5-3.8V. If I set my battery to 3.8V that will only give me 6.5watts... I have a feeling that isn't going to cut it for me :) I find I need...

Okay so now one is able to explain it because somewhere down the line( I am an okay vaper. I know most of my stuff) I need a good starting point. I have the Samsung r 18650 batteries. Dual parallel in a Dimitri box mod. 4.2 volts each that comes out to 8.4 volts total right? I was told my 1.2...

I have a battery that is capable of going up to 6.0 V but the chart that came with the battery did not have 1.6 Ohm listed on the chart, it skipped from 1.5 Ohm to 1.8 Ohm. I just need to know what the max amount of volts that I can use with this coil without reducing it's life expectancy to...

I use the Apollo Valiant VV & VW 1300mah battery capable of providing 3.0 - 6.0 V (it has a VW mode to but I don't use the watt mode) and the Aspire Nautilus tank. The batterys need to be replaced every 2 months approximately, (that by itself is expensive) but the tank is permanent. What is...

I have a variable voltage/wattage battery and I have heard that some say charge it as often as you can this reduces stress, others say that's bad, some say a combination of long and short cycles but I don't know which is best. My battery's manual said get down to 10% but it doesn't measure it...

I have a variable W/V battery and I prefer it on 4.2, but it is expensive and I never get the full 300 charges out of them like they claim they are supposed to get. Will decreasing the voltage by 0.4 Volts increase the battery life to a significant extent that makes it worth while?

So I work in a vape shop. I get a lot of questions about which batteries are best for sub-ohming and which last the longest, etc. I've been doing some reading and can't get a clear cut answer of how mah, amps, and voltage effect the performance of mechanical or regulated mods. If someone could...