Ok I have an idea of how it works as well. I downloaded and updated the firmware V2.32 and I don't see anything in the menu for it. So an automatic feature maybe?
Boxer Mod Dual 18650 Yihi 350J
- Thread starter jstrong
- Start date
- th_trl_thread_readers 0
- Status
I hope this is the correct thread to ask this in but I was told that using the new v2.32 update on a dual battery SXJ that the screen glitches out when you try to go above 75 watts. Can anyone here confirm this?
I have not experienced it. I run mostly in temp mode, however just tried going above 75W in Power mode and all is good.
I just upgraded a Boxer to 2.32
No screen aberration up to 120
Crown .25Ω SS316(?) so .00092 @ 40J 500F compensation 25C is OK meh
back to 80W power mode.
Anyone have good safe settings that will give an 80W equivalent hit?
No screen aberration up to 120
Crown .25Ω SS316(?) so .00092 @ 40J 500F compensation 25C is OK meh
back to 80W power mode.
Anyone have good safe settings that will give an 80W equivalent hit?
Last edited:
You won't get a 80w vape from 40J. I doubt even set to PowerFu+ that you' get enough heat into the coil to get that level of vape. Crank it all the way up to 75J and give it a try.
Also, the TCR of your coil isn't necessarily (or even likely) .00092. I don't have a Crown, but pre-built coils generally use a different metal for the legs of the coil to prevent the insulators from getting burnt. That means the overall TCR of the coil will be different (higher), So I recommend bumping the TCR up in small increments (.00002) until the vape suits you.
Hopefully down the road manufacturers will publish TCRs specifically for their coils.
Thanks! That got it in the ballpark. .00094 @ 69J 450F is way better
Got an email from Ginger Vaper and thought I'd share a few things with their permission.
1) There is a new firmware update w/ the Boxer logo on the site. Also, they will receive a 150W firmware update sometime soon.
2) They are working on a new YiHi Boxer, which should be available in November-ish. What's different this time? It's a 26650 mod. So if you want more battery life, but need something more slim/pocketable than a dual 18650 - here ya go.
Boxer 26650 - 81.5mm x 29.5mm x 51.2mm (3.2” x 1.16” x 2.01”)
SXMini M-Class - 94mm x 25mm x 41.5mm (3.7" x 0.98" x 1.63")
Boxer Dual 18650 - 80.5mm x 41.5mm x 39.2mm (3.17″ x 1.63″ x 1.54″)
1) There is a new firmware update w/ the Boxer logo on the site. Also, they will receive a 150W firmware update sometime soon.
2) They are working on a new YiHi Boxer, which should be available in November-ish. What's different this time? It's a 26650 mod. So if you want more battery life, but need something more slim/pocketable than a dual 18650 - here ya go.
Boxer 26650 - 81.5mm x 29.5mm x 51.2mm (3.2” x 1.16” x 2.01”)
SXMini M-Class - 94mm x 25mm x 41.5mm (3.7" x 0.98" x 1.63")
Boxer Dual 18650 - 80.5mm x 41.5mm x 39.2mm (3.17″ x 1.63″ x 1.54″)
I've never had a 26650 mod before.
I looked at RTD for specs and see MNKE has this:
Genuine MNKE IMR 26650 3500mAh 3.7v
Maximum Continuous Discharging Current 20 A
Maximum Instantaneous Discharging Current 60 A
Maximum Continuous Charging Current 6.5 A
Maximum Rated Discharging Current 30 A
Nominal Voltage 3.8 V
Maximum Charge Voltage 4.2±0.05 V
We'd call this a 30A 3500 mah battery that can be charged faf?
I looked at RTD for specs and see MNKE has this:
Genuine MNKE IMR 26650 3500mAh 3.7v
Maximum Continuous Discharging Current 20 A
Maximum Instantaneous Discharging Current 60 A
Maximum Continuous Charging Current 6.5 A
Maximum Rated Discharging Current 30 A
Nominal Voltage 3.8 V
Maximum Charge Voltage 4.2±0.05 V
We'd call this a 30A 3500 mah battery that can be charged faf?
Last edited:
I'll pass on the 26650. I have no interest in them with the current high-drain, high-capacity 18650s we have these days. If they just slim it down to 18650 size I'd be purchasing my 4th Boxer. A triple 18650 DNA200 would be nice as well. 
Last edited:
I just got my Boxer logo back! Thanks for this
To get the file go to the 150W Boxer ad page and scroll to
* Firmware Download **
Drop it in your cart, checkout for 0 dollars (no payment info required)
It gets sent to your e-mail. Upgrade as usual. easy.
There are also much higher capacity 26650's. The form factor never really caught on, but the super high amperage of some of them is overkill for a regulated mod. Whats nice is on the lower amperage ones you can get some battery life equal to dual 18650s while still plenty of amps to run this chip.
I like the idea. Not really a fan of the aesthetics of the ML class and the battery life of the M (not to leave out the battery cap). Now an option for a unit about the same size and 1/2 the weight with the run time of the dual 18650 version. With 75W/75J firmware and a 5200mAh battery, Im in.
And the Vape Droid design is complete.
I would hate to see the size of Boxer's take on a dual 26650 though.
And the Vape Droid design is complete.
Thats about as similar as an airplane is to a UFO. You have a better argument if you said VS copied Hana.
Ok, with my SXminiM sent back for warranty replacement/repair I started itching to try the newly released 350J firmware. (I currently only have one functional mod with TCR adjustment and I'm liking SS430)
I've been eyeing the Boxer for months, finally bit the bullet and ordered one. (RED)
While the 26650 mod sounds interesting, I'll wait to see what YiHi releases in December.
I've been eyeing the Boxer for months, finally bit the bullet and ordered one. (RED)
While the 26650 mod sounds interesting, I'll wait to see what YiHi releases in December.
Yep, V2 chip:
https://gingervaper.com/product/boxer-mod-75w-with-yihi-sx350j-v2-temperature-control/
I assume the dual 18650 will also go v2 in November. Probably all depends on Yihi.
- Status
Similar threads
