The ΣΟΦΙΑ v2 - Cage v2 tank - STR10 combo is now in stock
I see that you changed the size of the included tube (now a short body) and the drip tip (now an SS STR 10). I can't speak for others, but that's totally the setup that I prefer.
The ΣΟΦΙΑ v2 - Cage v2 tank - STR10 combo is now in stock
Most people get the short ΣΟΦΙΑ so we thought it's better this wayI see that you changed the size of the included tube (now a short body) and the drip tip (now an SS STR 10). I can't speak for others, but that's totally the setup that I prefer.
You would need a ΣΟΦΙΑ v2 35mm and a BB kit . I have heard once that on the v4 the top hollow screw is different than the previous so the top screw of the BB kit won't fit, but we haven't been able to get our hands on a v4 yet to verify itBillie - can you link me to whatever I need to get started at using a Sophia with the Billet Box Rev4? I'd be using the below tank:
R4 Boro Black
I'm just confusing myself on what I need to purchase to get going on that. Haha.
Thanks!
Sent from my SM-N920V using Tapatalk
The 35mm ΣΟΦΙΑ (v1 and v2) sit flush with the BB. You can se the instruction manual here@Billie-cig,
I hope you and the family are well.
On another note, I'm hoping you can answer a question for me.
I am planning on purchasing a Sophia V2 + Billet Box kit.
How does the Sophia V2 compare in airflow, to the BVC coils commonly used in the BBox?
I'm currently using a BVC set up in my BBox, but I would much rather have a Sophia V2 in there.
Thanks in advance!
Also, does anyone have any pictures of how low the Sophia tube opening/juice port sits in the tank on a Billet Box?
Thanks in advance!
I think I'll be your guinea pig (if you're not familiar - "guinea pig" just means: "test subject")If anyone could verify if the threading of the v4 BB is different than the previous versions, I would greatly appreciate it!
We are looking for the brass hollow screw the BB has on top, where the carto goes in, to keep the tank in place.
Thank you very much! It will help immensly!I think I'll be your guinea pig (if you're not familiar - "guinea pig" just means: "test subject")
I have a Rev4 now and am going to head to your site to place an order for the Sophia v2 and the existing billet box kit.
If it happens to need anything else - no worries - I'll figure it out one way or another. I'd hate to ship it all the way to Greece, but in all honesty, I did get a second one earlier today! So technically I "could". That's IF it's even needed. My guess is that it'll fit just fine with the existing kit.
Heading on over to place the order! I'll PM you my order number just so you have it.
Sent from my SM-N920V using Tapatalk
Ohh - cool! K well here's an update. The brass fitting from my rev3 absolutely fits in the Rev4. It screws and tightens. BUT the threads are a little different. Haha - I hope I didn't do any small damage to my threads. If I did - it wouldn't be your fault, and at that, the threads are so similar I'm sure it wouldn't effect things.Thank you very much! It will help immensly!
The only thing that we would need if it doesn't fit, is the original top hollow screw so we can make the same threading
Ohh - cool! K well here's an update. The brass fitting from my rev3 absolutely fits in the Rev4. It screws and tightens. BUT the threads are a little different. Haha - I hope I didn't do any small damage to my threads. If I did - it wouldn't be your fault, and at that, the threads are so similar I'm sure it wouldn't effect things.
Here's some pics of the two side by side. And you tell that the rev4 has almost a flat edge at the for edge if the threads that the Rev4 one doesn't have?
Honestly... I think they fit and if I wasn't told to look out for them being different - I wouldn't have known the wiser. I'm tempted to ask the Billet Box makers if they approve of using the Rev3 fitting in the Rev4 and vice versa.
Sent from my SM-N920V using Tapatalk
ΣΟΦΙΑ v2The Sophia works in the Rev 3 BB because it uses its own brass screw with a hole in it. Billie is asking whether they have to redesign the actual screw made to house the Sophia. We know the Sophia will work if the screw is correct.
Yes. It is the 35mm ΣΟΦΙΑ v2 with an STR 15 and the GV telescopic tank.So - I didn't place my order yet like I said I would. Haha - trying to figure out if i want to add a tank system onto the order to go with the Sophia. The descriptions confuse me a little. Is there a tank that's made of plastic that comes with the 35mm Sophia v2?
I'm guessing the below isn't the 35mm:
ΣΟΦΙΑ V2 - GV Telescopic Tank - STR15 BECK - By Leo
And do you know when you might get more stock of the below sweet 5mm clear tip?
Sent from my SM-N920V using Tapatalk
Thank you! That makes it more reassuringBillie - some good news to curb any remaining worries you (or I) had.
The below is a pic of the included instruction sheet with the Billet Box Rev4.
Look at #5 on the second page. I think this might mean your Billet Box kit is good to go for the Rev4 as well.
Sent from my SM-N920V using Tapatalk
Ha - just saw this now. Maybe I'll order that tank next time.Yes. It is the 35mm ΣΟΦΙΑ v2 with an STR 15 and the GV telescopic tank.
I will look in our stock tomorrow and let you know