【New】SWAG PX80 is Coming
- Thread starter Vaporesso_Milo
- Start date
- th_trl_thread_readers 0
- Status
So you bought just the pods? The pods are designed for the GTX Go 80.
I understand that but the problem here is with the pods. GTX 0.6/0.8 ohm coils don't fit into GTX GO Pod 26. That's the problem. I showed a picture with PX80 to properly display the situation since it raises the o-rings on the pod so we can see better.
But if I use it with GTX Go 80, it won't fit either.
Again, the problem is with the GTX Go Pod, regardless of the mod we use.
Do you have the gtx go 80? I'll grab one of mine when I get home and try a .6 coil in it so I can see for myself. I'll post a picture when I do. I guess it could be a flaw.
I don’t have the GTX GO 80 but the issue is with the GTX GO pod. Maybe it’s with my particular pod itself.
Please let me know after trying yourself. I’m interested to see.
Sorry I forgot to post last night. I tried the coil in the 26 tank with the go and it fits fine but only blocks airflow on the px80. Like I was trying to explain before, the 26 tank was designed specifically for the go 80 and not the px80.
But the way 0.6 ohm coil fits into the pod, it feels like it doesn't fit properly and leak eventually.Sorry I forgot to post last night. I tried the coil in the 26 tank with the go and it fits fine but only blocks airflow on the px80. Like I was trying to explain before, the 26 tank was designed specifically for the go 80 and not the px80.
I'm going to get myself a GTX 80 and try filling the tank as well.
I watched while I inserted the coil and had to make sure to align the small tip of the coil with the tube but it did go in.
Doesn’t it leave a little ledge on the bottom of the pod? 0.2 coil sits flash to the pod while 0.6 coil pops out a little from the bottom of the pod and this makes me think it’ll leak.
You can try shaking the empty pod while 0.2 and 0.6 coils inserted and you’ll see 0.6 coil falls while 0.2 stays in tact. That’s what I’m talking about.
I’ll get it back out this weekend and try it with liquid in the tank and vape it for a while. I noticed the distance from the base of the tank to the air holes is different on the 26 tank and the px80 tank so was thinking that’s why the airflow is partially blocked when the 26 is put on the px80.
In general, yes it’s a bit blocked on PX80 but that’s not the problem.
The problem is with the 0.6 coil the holes get even more blocked while 0.2 they don’t. That’s because 0.6/0.8 coils don’t fit properly to the pod and leave a little ledge on the bottom.
That’s why I stated that not every GTX coil work with the GTX GO Pod. Again it’s not about the PX80. It’s about the pod itself.
I guess I misunderstood since I thought the concern was the airflow being blocked. Like I said, I’ll try it this weekend.
I had about ten reviews in a row and had forgotten that I did try a .6 coil in the 26 with the go 80. It was an airy mtl vape but worked. Depending on the coil each has a different amount of airflow available due to the size of the opening. However, I’ll try it again this weekend.
I tried with 0.8 ohm GTX2 coils (the ones with 3 o-rings) and they work fine. I think the problem is with the GTX coils. New GTX2 coils work just fine.
The one on the left is GTX coil and the right one is GTX2 coils. They have 3 o-rings. Looks like new GTX2 coils work while the old ones don't.
Anyway, so far I'm happy that I could insert 0.8 ohm coils which sits flash and doesn't leave a ledge.
Cheers!
I’m running one of the old .6 coils in the 26 pod right now on the go 80 and it’s working fine with no leaking. My only complaint is it’s a bit warm of a vape for my tastes. On the gtx go80 the airflow isn’t blocked at all.
I was going to try a .8 but the only ones I had were gtx2 so figured it was pointless.
I was going to try a .8 but the only ones I had were gtx2 so figured it was pointless.
- Status
Similar threads
