I haven't got a mech mod yet, but from what I've read on here, a Nemesis clone can be a good place to start. I'm sure others will chime in on recommendations for the mod, but I've heard that you want to steer clear of the Trustfire chargers. I've also heard that Samsung 25R batteries are good for running in mechs.I'm thinking of buying my first mechanical mod, a nemesis style mod, it comes with a Trustfire TR-001 Multifunctional Charger, is this mod and charger a good choice to start with? And also can anyone recommend a battery to buy for it? I'll be using this when I'm out and about, cheers
I'm thinking of buying my first mechanical mod, a nemesis style mod, it comes with a Trustfire TR-001 Multifunctional Charger, is this mod and charger a good choice to start with? And also can anyone recommend a battery to buy for it? I'll be using this when I'm out and about, cheers
As far as mech mods go the Nemesis clone is a good place to start. But before buying one, you should ask yourself exactly what you want from a mod.
Mech mods have several disadvantages, especially in today's market with so many high powered VV/VW mods available. In mech mods as the battery drains your vape gets weaker. As the voltage drops off so does vapor production. Also mech mods usually require a lot of fiddling to keep them working right. You'll find that frequent adjustments of pins, buttons, and insulating rings are usually required to keep it working smoothly. Regular cleanings is also a must.
Then there is the issue of battery safety and power delivery to your coil. You've got to know your ohms law calculations and battery specs so you know what coils will and won't work well with it, and what coil builds are just plain dangerous to use on it. Mech mods have ZERO protection on them so if you put a coil with a short or too low of an ohm you can quickly damage your battery or worse. While IMR batteries shouldn't explode like the old unprotected ICR would you could still get it so hot it will vent black smoke or even catch fire, and some batteries can still rupture into flames.
If you know what you're doing, know your ohms law calculations and battery specifications, and you have all of the necessary tools, especially an ohm meter for your coils and you're wanting to take the plunge then like I said, the Nemesis is a really good place to start. A high quality Nemesis mod should be relatively trouble free once you figure out how to adjust everything to make it work right, and there's very little voltage loss through the mod so it hits really well. It has an excellent balance between performance and being easy to use and maintain.
And as far as a battery for a mech mod, the only one I would recommend is the Orbtronic SX30. It's a true 30A continuous drain IMR battery similar to the Sony VTC line. There are far too many fake Sony VTC batteries on the market for me to recommend those, but you buy the Orbtronic directly from Orbtronic so you're guaranteed to get a genuine battery and not some unsafe counterfeit. They also come with an insulating plastic carrying case which makes transporting your spare batteries far safer.
High Drain IMR 18650 Battery 30A Orbtronic SX30 rechargeable Li-ion Li-Mn
If anything I just said scares you or went over your head then you should probably give careful consideration to a high powered VV/VW mod instead. The 100-150W adjustable mods can deliver the same power as the mech mods without the hassle and trouble of constantly fiddling with it to maintain it, they'll deliver consistent power to the coil from beginning to the end of a battery charge, and they've got electronic safety measures in place to keep you from hurting the battery, your mod, or yourself.
I've got a couple of mech mods including the Nemesis, but I never use them anymore. I only use VV/VW mods. I prefer the regulated power delivery and hassle free daily use of the VV/VW mods. There are lots of reasons why people like mech mods, but they aren't for everyone. Make sure you know what you're getting into before you spend your money.
I already have a 30w mvp 3.0 which does just the job, I'm just after something slightly smaller for use when going out socialising and stuff I've been tempted with the istick, can you get a regulated tube mod that isn't huge? As I'm not going to lie what you said was a bit mind blowing and sounds a lot more complicated than my mvp
LolAs far as mech mods go the Nemesis clone is a good place to start. But before buying one, you should ask yourself exactly what you want from a mod.
Mech mods have several disadvantages, especially in today's market with so many high powered VV/VW mods available. In mech mods as the battery drains your vape gets weaker. As the voltage drops off so does vapor production. Also mech mods usually require a lot of fiddling to keep them working right. You'll find that frequent adjustments of pins, buttons, and insulating rings are usually required to keep it working smoothly. Regular cleanings is also a must.
Then there is the issue of battery safety and power delivery to your coil. You've got to know your ohms law calculations and battery specs so you know what coils will and won't work well with it, and what coil builds are just plain dangerous to use on it. Mech mods have ZERO protection on them so if you put a coil with a short or too low of an ohm you can quickly damage your battery or worse. While IMR batteries shouldn't explode like the old unprotected ICR would you could still get it so hot it will vent black smoke or even catch fire, and some batteries can still rupture into flames.
If you know what you're doing, know your ohms law calculations and battery specifications, and you have all of the necessary tools, especially an ohm meter for your coils and you're wanting to take the plunge then like I said, the Nemesis is a really good place to start. A high quality Nemesis mod should be relatively trouble free once you figure out how to adjust everything to make it work right, and there's very little voltage loss through the mod so it hits really well. It has an excellent balance between performance and being easy to use and maintain.
And as far as a battery for a mech mod, the only one I would recommend is the Orbtronic SX30. It's a true 30A continuous drain IMR battery similar to the Sony VTC line. There are far too many fake Sony VTC batteries on the market for me to recommend those, but you buy the Orbtronic directly from Orbtronic so you're guaranteed to get a genuine battery and not some unsafe counterfeit. They also come with an insulating plastic carrying case which makes transporting your spare batteries far safer.
http://www.orbtronic.com/batteries-c...li-ion-battery
If anything I just said scares you or went over your head then you should probably give careful consideration to a high powered VV/VW mod instead. The 100-150W adjustable mods can deliver the same power as the mech mods without the hassle and trouble of constantly fiddling with it to maintain it, they'll deliver consistent power to the coil from beginning to the end of a battery charge, and they've got electronic safety measures in place to keep you from hurting the battery, your mod, or yourself.
I've got a couple of mech mods including the Nemesis, but I never use them anymore. I only use VV/VW mods. I prefer the regulated power delivery and hassle free daily use of the VV/VW mods. There are lots of reasons why people like mech mods, but they aren't for everyone. Make sure you know what you're getting into before you spend your money.
I already have a 30w mvp 3.0 which does just the job, I'm just after something slightly smaller for use when going out socialising and stuff I've been tempted with the istick, can you get a regulated tube mod that isn't huge?