Did you see the "Jew flavors" before it let me edit? Classic
A Big Welcome from MadTown Vapor
- Thread starter Dino.Spinelli
- Start date
- th_trl_thread_readers 0
- Status
Yea, I was reading it and had to read it again to make sure I read it right.
:
: just so everyone is clear, I'm 1/4 polish Jew (learned this a few years ago actually) so no offense meant lol.Hello Dino,
firstly, thanks for the soft, black plastic bottles, I just received the new bottles with my recent order and was pleasantly surprised ... anything that helps keep light away from the juice and makes squeezing them easier for us geezers is great
kudos to you
a couple of my recent orders are repeats, I'm enjoying the Honey Badger even more than the first time, and Caramel Swirly is still very pleasing ... I took Caramel Swirly on a trip to Spain a while back, I vaped it daily and it held up very well
Butter Nutz is a new try and I'm letting it age a little longer
can you tell me more about the KFL 3.1 clone you sell ? ... is it an ehpro or hcigar or would you rather not say ? ... I like an airy draw and I normally vape vg heavy juices, at least 50-60% vg, usually more ... I have read some clones won't wick vg heavy juices very well, so how does this one perform with thicker juice ?
I prefer smaller juice tanks so I'm hoping these quartz/clear sections you may sell will give a smaller juice capacity and are thread compatable
a friend may lend me an original KFL Lite + for a week or so to try ... so I'll have yours to compare to the original if I pull the trigger here ... flavor is my biggest issue, the taste has to be as good, or close to it, as the (too) expensive original model ... I'm hoping it will, what did you think ? ... I see you posted that you eliminated the tank from your clone for a more intense flavor hit, how is that working ? as far as re-filling and do you get at least couple ml in that inter cone ?
I won't have any problems building a coil, I'll use 28 ga Kanthal and cotton ... nor do I care about sloppy threads ... I'm only concerned about the functionality and possibly shallow juice channels or having to drill larger air holes
for your asking price I really shouldn't be on the fence about it all
thank you for even offering it and the detailed build pictures, your personal testing and review, very few do all that
comments from any users of this particular clone model would be appreciated
regards
bbb
firstly, thanks for the soft, black plastic bottles, I just received the new bottles with my recent order and was pleasantly surprised ... anything that helps keep light away from the juice and makes squeezing them easier for us geezers is great
kudos to youa couple of my recent orders are repeats, I'm enjoying the Honey Badger even more than the first time, and Caramel Swirly is still very pleasing ... I took Caramel Swirly on a trip to Spain a while back, I vaped it daily and it held up very well
Butter Nutz is a new try and I'm letting it age a little longer
can you tell me more about the KFL 3.1 clone you sell ? ... is it an ehpro or hcigar or would you rather not say ? ... I like an airy draw and I normally vape vg heavy juices, at least 50-60% vg, usually more ... I have read some clones won't wick vg heavy juices very well, so how does this one perform with thicker juice ?
I prefer smaller juice tanks so I'm hoping these quartz/clear sections you may sell will give a smaller juice capacity and are thread compatable
a friend may lend me an original KFL Lite + for a week or so to try ... so I'll have yours to compare to the original if I pull the trigger here ... flavor is my biggest issue, the taste has to be as good, or close to it, as the (too) expensive original model ... I'm hoping it will, what did you think ? ... I see you posted that you eliminated the tank from your clone for a more intense flavor hit, how is that working ? as far as re-filling and do you get at least couple ml in that inter cone ?
I won't have any problems building a coil, I'll use 28 ga Kanthal and cotton ... nor do I care about sloppy threads ... I'm only concerned about the functionality and possibly shallow juice channels or having to drill larger air holes
for your asking price I really shouldn't be on the fence about it all
thank you for even offering it and the detailed build pictures, your personal testing and review, very few do all thatcomments from any users of this particular clone model would be appreciated
regards
bbb
I know,I know.....but my eyes can't see those itty bitty tiny coils on my Kanger heads. And yes, I know, I should be using an RBA. I have my heart set on a copper mod so I can patina it. But I still can not decide on the atty! I just don't think dripping is going to be very compatible with my everyday shenanigans. I want to get a good RBA that has a tank. And all the good ones are way outta my price range at the moment. (I need a sugar daddy! or Momma, I don't discriminate!
Solution? Other than "sugar people" lol. Kayfun, and a coil jig. I made my own jig out of a coat hanger, just never used it for real, just to test.
Hello Dino,
firstly, thanks for the soft, black plastic bottles, I just received the new bottles with my recent order and was pleasantly surprised ... anything that helps keep light away from the juice and makes squeezing them easier for us geezers is great
a couple of my recent orders are repeats, I'm enjoying the Honey Badger even more than the first time, and Caramel Swirly is still very pleasing ... I took Caramel Swirly on a trip to Spain a while back, I vaped it daily and it held up very well
Butter Nutz is a new try and I'm letting it age a little longer
can you tell me more about the KFL 3.1 clone you sell ? ... is it an ehpro or hcigar or would you rather not say ? ... I like an airy draw and I normally vape vg heavy juices, at least 50-60% vg, usually more ... I have read some clones won't wick vg heavy juices very well, so how does this one perform with thicker juice ?
I prefer smaller juice tanks so I'm hoping these quartz/clear sections you may sell will give a smaller juice capacity and are thread compatable
a friend may lend me an original KFL Lite + for a week or so to try ... so I'll have yours to compare to the original if I pull the trigger here ... flavor is my biggest issue, the taste has to be as good, or close to it, as the (too) expensive original model ... I'm hoping it will, what did you think ? ... I see you posted that you eliminated the tank from your clone for a more intense flavor hit, how is that working ? as far as re-filling and do you get at least couple ml in that inter cone ?
I won't have any problems building a coil, I'll use 28 ga Kanthal and cotton ... nor do I care about sloppy threads ... I'm only concerned about the functionality and possibly shallow juice channels or having to drill larger air holes
for your asking price I really shouldn't be on the fence about it all
comments from any users of this particular clone model would be appreciated
regards
bbb
Thanks BBB for giving MadTown Vapor a try. I am glad to here you are liking the juice and the new bottles. I ordered the Kayfun 3.1 from one of my supplier "Sinovape". They sent me a Kayfun 3.1 to try before I ordered, to check the quality. After using it for a week I was very impressed with the quality and and the awesome taste I get from it. I have had mine for about six weeks and have had no issues at all with it. I have not had any dry hit's since the day I have received mine. I have had plenty of 20/80 juices with no wick issues. No drilling needed. I am working with my supplier right now to see what my options are for replacement parts and if a upgrade quartz kit is doable. If you would like more info you could ask Loomeye. He bought two from me about three weeks ago and knows a lot about them.
I would LOVE a Kayfun or Nimbus...... $100. Can't pull that trigger anytime soon. What are the best clones of these two? I know I will be able to build a coil. Especially on a Nimbus. Not such a small space to work in. And if all else fails? Man Friend is an electrical engineer for Oak Ridge. He could probably build me a mod AND an RBA. lol But any insight from my trusted ECF Family would be greatly appreciated. (((hugs)))
Ha! Whats that supposed to mean?!?[emoji39]I bet you would, need a couple ducky
Last edited:
Well i got my clone u.s. made AND they predrilled extra holes, which is a small problem for the nimbus typically (holes small) at that site where people sell stuff. I paid under 10 bucks. Nimbus is old at this point so clones are cheap. But you probably cant find a bad one they are so simple with a decent deck. I saw a mega recently, larger diameter. Hell, id buy you one just to get you to try it lol.
Its almost like you are trying to push me to rob you blind! LolIt was just to get your feathers riled up
Hey, everybody. I missed a lot again.
I'm swimming in juice again. LOL Gotta clear out some bottles so I have room to order some of the new flavors.
I have a quartz kit (by Rainbow Heaven) for my Kayfun Lite +. I haven't had any problems with the o-rings holding the glass securely. What is a pain is that I can't fit an 18ga needle in the fill hole so have to do a top fill. Won't be an issue for the 3.1 model. It also really diminishes the capacity because of the thickness of the glass. I didn't measure, but I'm guessing I only fit about 2.6ml in it. I think I'm just going to get a nano m-tank since I already have the short chimney.. Those have 3.5ml capacity.
I'm swimming in juice again. LOL Gotta clear out some bottles so I have room to order some of the new flavors.
I have a quartz kit (by Rainbow Heaven) for my Kayfun Lite +. I haven't had any problems with the o-rings holding the glass securely. What is a pain is that I can't fit an 18ga needle in the fill hole so have to do a top fill. Won't be an issue for the 3.1 model. It also really diminishes the capacity because of the thickness of the glass. I didn't measure, but I'm guessing I only fit about 2.6ml in it. I think I'm just going to get a nano m-tank since I already have the short chimney.. Those have 3.5ml capacity.
Mine is an EHPro Kayfun Lite +, but Dino has the 3.1 at the best price I've ever seen. I think I paid around $34 for mine quite a while ago. I'm not sure what the difference is. I originally bought the version I have because it has the steel tank.
I do love my Nimbus, can't remember where I bought it though. It does have a very tight draw and I don't dare drill it out myself, but since I don't sub ohm, the draw isn't that bad.
With a Nimbus and a Kayfun, you'd have two very nice, and easy to build on toppers. Great choices to start out with!
- Status
Similar threads
