My phone camera is even worse than my video camera I think...lol...made a quick video hope this helps you outhey boneshark187, would you mind sharing a couple of pictures? seems you got a hack here
- Status
Really enjoying my Chichi/AGA-T Hybrid. Using it with an 18500, safe stop fuse, and a twisted 32g 4/5 coil at 1ohm. Just a great solid little hybrid! Thx to everyone here for sharing their methods.
Received my aga-t2 and drip tip (the smok one, that looks really good). Quickly did a a coil (1 ohm, ribbon kanthal) and put it on my paps (350), and it's working good. Now waiting for the aga-t: orings ready, teflon realy, looking forward to proceed with the "hybridation"
I noticed that the threads on the center tube of the AGA-T are the same as a 510 connector...
This made me intrigued, so i descided to try something....
SO!
For those of us that would like to use other tanks on our M20x1 threaded mods, i propose this!
Take your AGA-T
Disassemble it.
keep this part. you should know it well if you've been following this thread.
Grind it down until it looks like this.
Install it on your tank of choice.
I chose to go with the RSST.
And simply install it on to your mod of choice....
Aint that better!
I chose to go this route, because now, i can easily go from a geni setup, back to a 510 setup without having to completely disassemble my tank.
I put this here instead of its own thread because i wanted to give Studiovap credit, because if it wasnt for him, i wouldnt have a first gen AGA-T to destroy.
Hope you guys find this useful
This made me intrigued, so i descided to try something....
SO!
For those of us that would like to use other tanks on our M20x1 threaded mods, i propose this!
Take your AGA-T
Disassemble it.
keep this part. you should know it well if you've been following this thread.
Grind it down until it looks like this.
Install it on your tank of choice.
I chose to go with the RSST.
And simply install it on to your mod of choice....
Aint that better!
I chose to go this route, because now, i can easily go from a geni setup, back to a 510 setup without having to completely disassemble my tank.
I put this here instead of its own thread because i wanted to give Studiovap credit, because if it wasnt for him, i wouldnt have a first gen AGA-T to destroy.
Hope you guys find this useful
so wait that won't work on the new AGA T cause they don't have threaded tops right?
exactly...
Only the AGA-T has a threaded top cap.
The AGA-T+ & AGA-T2 have o-ring fitted caps.
looks like it, but i would contact the vendor to make sure.
Nice! I had some pretty big orings for the two larger holes
Still looking for bigger orings, hope that saturday is going to be "the day"
I used the o-ring plug method too. No leaks to date, and don't expect any either
if somebody in europe (i live in germany right now) would be so kind to send me the fat orings for the bigger holes, it would really be good! I will pay of course, or send back some "vape goodies"
Having a hard time to find them, and the truth is that i don't have a lot of time to go around shops...
Having a hard time to find them, and the truth is that i don't have a lot of time to go around shops...
Thanks for the info!
I did this today. I had 1 thick o ring. It was not thick enough, but close. So I cut a section of it, fed it thru the hole then stretched it so it shrunk in width. Had my wife wrap Teflon tape around it and slipped that section in the hole. Released it and it expanded nice and tight. Couple hours now and no leaks.
I did this today. I had 1 thick o ring. It was not thick enough, but close. So I cut a section of it, fed it thru the hole then stretched it so it shrunk in width. Had my wife wrap Teflon tape around it and slipped that section in the hole. Released it and it expanded nice and tight. Couple hours now and no leaks.
Wow, this is a killer thread, I'm glad I stumbled onto this.
Two questions though, if you don't mind:
1. does anyone know if the AGA-T will thread into a Sigelei, like the 8, 13, or 19?
2. Is there any any shot in hell I will find an original AGA-T now that this thread exists?
Thanks guys and gals!
Two questions though, if you don't mind:
1. does anyone know if the AGA-T will thread into a Sigelei, like the 8, 13, or 19?
2. Is there any any shot in hell I will find an original AGA-T now that this thread exists?
Thanks guys and gals!
Wow, this is a killer thread, I'm glad I stumbled onto this.
Two questions though, if you don't mind:
1. does anyone know if the AGA-T will thread into a Sigelei, like the 8, 13, or 19?
2. Is there any any shot in hell I will find an original AGA-T now that this thread exists?
Thanks guys and gals!
I was just wondering the same thing! I have seen a couple old style aga's in the classies, but I haven't been quick enough to snag them...
Sent from my SGH-T989 using Xparent BlueTapatalk 2
Liberty Flights has them. They are like $43. Use the code ECF for 20% off
IDK about the sigelei's. I do have 1 and it does not fit. IDK which it is. It has the matte tele body with the polished top and bottom caps. Its a GGTS clone. Hope that helps.
IDK about the sigelei's. I do have 1 and it does not fit. IDK which it is. It has the matte tele body with the polished top and bottom caps. Its a GGTS clone. Hope that helps.
- Status
Similar threads
- Locked
