LOL!!! That's why I preferred buy it from electronic parts store, 10pcs already too much.
haha i just bought the damn thing and no more worries after this hehe
AGA-T+ Rebuildable Atomizer
- Thread starter ericska
- Start date
- th_trl_thread_readers 0
-
- Tags
- evic vamo vapor pro virgin vapor
- Status
haha i just bought the damn thing and no more worries after this hehe
haha i just bought the damn thing and no more worries after this hehe
From electronic parts store? Hard plastic or vinyl type? Share the pic man!
From electronic parts store? Hard plastic or vinyl type? Share the pic man!
i just bought from ebay the 100pcs not yet arrive, will share pics of course
From electronic parts store? Hard plastic or vinyl type? Share the pic man!
Heres the pic from eBay...
Sent from my SGH-T989 using Tapatalk 2
it didn't mentioned whether its hard plastic or rubber but here's the link 100 Pcs Insulating Tablets Insulation Bushing to 220 | eBay
Actually I was asking eLCruz, he post the pic. Well? eLCruz?
On eBay didn't mention too...
I haven't got them yet, my grommets are still holding up. But read someone needed some and went looking.
I believe they are hard plastic, not rubber. But they seem to be the perfect size.
:thumbup:
Sent from my SGH-T989 using Tapatalk 2
I believe they are hard plastic, not rubber. But they seem to be the perfect size.
:thumbup:
Sent from my SGH-T989 using Tapatalk 2
@ericska my nimbus bottom insulator melt and i have a big sigh this morning one after another of my insulator giving me problem but this its my fault cuz i went a wee bit too far bt torching my wick and it melted so i went to jalan pasar searching for the transistor insulator grommet but guess what they dont sell it there
Sent from my GT-I9300 using Tapatalk 2
edit: sorted out as i trim the melted plastic into the right fitting hehe
so i went to jalan pasar searching for the transistor insulator grommet but guess what they dont sell it there Sent from my GT-I9300 using Tapatalk 2
edit: sorted out as i trim the melted plastic into the right fitting hehe
Last edited:
Where's Redlof when i need him, my bottom insulator tear up again... aga t2 is on the bench
Sry bro, .... happened, cant online. If u urgently need the isulator, go thye huat or some hardware shop look for o-rings for plumbing, it came with several size o-ring. I use the smallest size from the package, but need to cut out abit portion of the o-ring to perfectly fit the bottom of Aga-t. I also use the same o-ring for my vamo too that had 9.9 omp error.
From electronic parts store? Hard plastic or vinyl type? Share the pic man!
Its kinda hard plastic type. Btw bro envy ur workmanship. Any chance u can customise Aga-t top cap ? Ppl are selling rm 70.00 for it.
Last edited:
@ericska my nimbus bottom insulator melt and i have a big sigh this morning one after another of my insulator giving me problem but this its my fault cuz i went a wee bit too far bt torching my wick and it melted
Sent from my GT-I9300 using Tapatalk 2
edit: sorted out as i trim the melted plastic into the right fitting hehe
Ah... sorry to hear that...
But Redlof has answered you.
Thanks for the info! Nothing to envy, you got machines and tools then anything will work.
I did planned to machine one but too busy... Another problem, my micro lathe(smaller than mini lathe) is quite struggle for machining 304 stainless steel, still looking for 316 grade... Anyway I'm very happy with the stock one already.
Rm70? Is it stainless steel? If so I think it's ok for this price. It's quite knotty to bore the stainless steel.
Thanks for the info! Nothing to envy, you got machines and tools then anything will work.
I did planned to machine one but too busy... Another problem, my micro lathe(smaller than mini lathe) is quite struggle for machining 304 stainless steel, still looking for 316 grade... Anyway I'm very happy with the stock one already.
Rm70? Is it stainless steel? If so I think it's ok for this price. It's quite knotty to bore the stainless steel.
hi ericska. been awhile since i visited here
yeah most of those custom caps are SS but not sure if 304/316. they came in zen, foggati or orion design.. slightly off topic but do u have any ideas where i can get brass/ss tube, custom made for my mods here in sibu? simple tube with threads only
hi ericska. been awhile since i visited here
slightly off topic but do u have any ideas where i can get brass/ss tube, custom made for my mods here in sibu? simple tube with threads only
Sarawak Machineries Trading Co. S/B at 55, Mission Road, another one Tie Brother Hardware S/B at 88, Sungai Antu 3. There's many machinery workshops around Mission Road and Lanang you can ask around. Not my micro lathe, too knotty for ss and it doesn't has thread turning feature.
Finally found an aga-t with knurled and orings instead of grommets and bore the wickhole to 3.5.. How big can the newer aga-t with rubber grommet be bore to..?
About the same I think... but very risky. Refer back to post #244. T+ with orange o-ring can go up to 4mm, but 3.5mm is suffice.
Decided to get an AGA-T2. Based on what i know it's just the AGA-T+ with pyrex tank. Have a few questions in mind anyone can help me out?
1. How do you clean your mesh if you decides to change juice?
2. SS Mesh 400 vs 500. Whats the pros and cons and why which is better than the other in your opinion?
3. How long will ss mesh last for a regular vaper in average? 2 weeks?
4. What size cut of ss mesh do you use for your AGA-T+ setup?
5. Do AGA-T+/T2 have leaking issues? If yes, how do you solve it?
1. How do you clean your mesh if you decides to change juice?
2. SS Mesh 400 vs 500. Whats the pros and cons and why which is better than the other in your opinion?
3. How long will ss mesh last for a regular vaper in average? 2 weeks?
4. What size cut of ss mesh do you use for your AGA-T+ setup?
5. Do AGA-T+/T2 have leaking issues? If yes, how do you solve it?
- Status
Similar threads
- Locked