aga-t2 problem

[TheBoom]

TBH i havent had metallic taste before... Only occasionally when got hotspots then got that chaota ejuice taste.

A fellow member here told me that metallic taste is actually your coils burning into your mesh.

 

[Meddler]

the original airhole is pretty small.. im running my aga on an evic at 3.4-3.6V on a 2.0ohm coil.. great vapor production.. http://www.e-cigarette-forum.com/forum/malaysia-forum/369474-aga-t-rebuildable-atomizer-16.html #153 very useful tips from our neighbour..

that was a very helpful post, I think i'm gonna have to try that next

 

[Aizerson]

that was a very helpful post, I think i'm gonna have to try that next

yep you should try it.. just be careful that you dun do a dry burn on it as you gonna burn the cotton..

 

[MegaDark]

If you are using pure vg try using #325 or #200 mesh as it wicks better.
On mech mods like madhero said its better to be on 0.8 ohm to 1 ohm.
Sooner or later you will try 0.45 ohms on dual coil hee hee.
That's my setup for now.
Flavour and vapor is massive.


Sent from my GT-N7105 using Tapatalk 2

 

[Aizerson]

Some things for my aga came in today.. cant wait to try that out..

 

[shanks]

Some things for my aga came in today.. cant wait to try that out..

Give a review on the ceramic wick Was thinking of getting it!

 

[Aizerson]

Give a review on the ceramic wick Was thinking of getting it!

will have to get the right technique to coil it first.. i already broke one when trying to coil it.. damn wasted..

 

[mavieboy]

will have to get the right technique to coil it first.. i already broke one when trying to coil it.. damn wasted..

woah is it very brittle?

 

[chris85e]

lol u just need a bit of extra strength to break the wick.

woah is it very brittle?

 

[shanks]

lol u just need a bit of extra strength to break the wick.

Sala! Is a little bit of strength...no need EXTRA strength!

 

[Aizerson]

You dun need any strenght to break it.. Not advisable to those who is with the stock wickhole size.. Im definitely gonna drill mine to 1/8 inch and order the 1/8 d next time..

 

[Gambit52]

Ouch bro ..

 

[Aizerson]

anyone here using ceramic wick? or have tried ceramic wicks?

 

[Ash45]

1st time trying coils on mesh....158 attempts later...

Sweet, sweet, vape...

 

[TheBoom]

1st time trying coils on mesh....158 attempts later...

Sweet, sweet, vape...

is that the mini did clone?

 

[Ash45]

Yah. Did clone.

No more silica wicks for me. Never! Lol...

 

[Intel]

The guy that alot ppl like finally review on this.

Part 1 - Review

 

[Intel]

Part 2 - How to build

 

[JIMP-er46]

if not wrong that for oxidase. pls correct me if i m wrong..

I dunno y but i just like to do it that way.. Have tried burning it to oxidize it but i dont like the metal taste that u'll have for a period of time during break in..with an unoxidized wick with cotton insulator i dont get that metal taste at all.. This just my preference.

Different ppl have different methods for oxidizing.

1) Cut to required size, Jack Frost by whacking edges and then lightly torch back and front portion (not too much that it gets too hard to roll). Roll, then torch again. Coil.

2) Cut to size, roll. Torch one half for 5-10secs then torch e other half. Coil.

3) Cut to size, roll, torch and quench. Repeat. Coil.

3) Cut to size. Don't oxidize, boil your mesh. Coil.

4) Cut to size. Don't oxidize, don't boil. Coil.

I'm getting lazy. Just roll to desired width, torch for a few seconds on one half and chuck it in. Pulse fire 'till all coils glow evenly.

Now that I've tried unoxy wicks, I get lazier. Roll. Slap on coils. Pulse fire with really short intermittent pulses.

If you are using pure vg try using #325 or #200 mesh as it wicks better.
On mech mods like madhero said its better to be on 0.8 ohm to 1 ohm.
Sooner or later you will try 0.45 ohms on dual coil hee hee.
That's my setup for now.
Flavour and vapor is massive.


Sent from my GT-N7105 using Tapatalk 2

@ NK Maybe you could recommend them a better battery like AW or MNKE IMRs so that no one does an epic batt + mod failure. Also, guys, please note e current draw on yr AWs to ensure you don't over-discharge. Voltg/Res = Amp

AW IMR 18350 - 4A
AW IMR 18490 - 6A
AW IMR 18650 - 10A

What this means is that slapping a 1.0ohm coil every time on your 18350 mod will shorten e batt's life span. In e event that you use ICRs, batt failure with a likelihood of a spectacular blast will occur.

Vape safe and enjoy!

 

[Ash45]

Yah... Whatever floats your boat...

What worked for me: Standard Blowtorch (not handicraft kind)---------> Quench----> Repeat twice-----> Coil.

@Aizerson: You gave me an inspiration on 'Hybrid SS Mesh', will keep posted if the idea works.