All new: The Precise Simplicity 14500 from Super-T Manufacturing Inc!

[txredxj]

if i set it down very careful its ok but if it goes down its not coming up. a 510 dripper, ss drip shield and metal drip tip are the most i can put on it at home. i usually have it in the truck and its not the smoothest ride. i have a cyclon rba on the way to mess with, hoping for the best

 

[andrebandre]

I just stretched the spring a little and it works to my liking now and although it wasn't firing when rested it was borderline.
I still don't like the fact that the bottom of the switch is slightly convex/pointed and it makes it easy to tip over.

 

[txredxj]

mine is opposite, bit concave. you can see where its not polished in the pic




polished up and a bitty FT dripper. of course the sun has to hide for my pictures lol

 

[Tripster]

I rarely utilize the locking ring and it's never tipped over even with accidental brute force clumsy me hitting the table.

 

[andrebandre]

mine is opposite, bit concave. you can see where its not polished in the pic
polished up and a bitty FT dripper. of course the sun has to hide for my pictures lol

Man, i am green with envy at the quality of the pics you posted.
I have tried to install tapatalk on my phone without success, opened an account on Flickr just be able to drag by the hair some decent pics in here, with similar results, it will be the death of me if i can't find a way to upload some better pics than the resident system allows.

 

[forcedfuel50]

I just stretched the spring a little and it works to my liking now and although it wasn't firing when rested it was borderline.
I still don't like the fact that the bottom of the switch is slightly convex/pointed and it makes it easy to tip over.

Send the switch in and we'll replace it, no problem It shouldnt Be pointed, probably a bit of nub on it from machining. Send to:

Super T
Box 331
Sauk Rapids, MN 56379

 

[forcedfuel50]

I just stretched the spring a little and it works to my liking now and although it wasn't firing when ressimplicity borderline.
I still don't like the fact that the bottom of the switch is slightly convex/pointed and it makes it easy to tip over.

With a flat bottom exposed button, its not going to stand without firing without locking it(well maybe the 14500 without anything to heavy on it, but not the bigger simplicity models). Unless one puts a super stiff spring in, which I don't personally like.

 

[andrebandre]

Send the switch in and we'll replace it, no problem It shouldnt Be pointed, probably a bit of nub on it from machining. Send to:

Super T
Box 331
Sauk Rapids, MN 56379

Thank you, much appreciated but really there is no need.
I can't part with it for one second anyway.
It is imperceptible with the naked eye, just when you rest it on a flat surface you can feel it.
I don't mind one bit the Tower of Pisa efect.

PS. And the totally crappy pics i'm able to upload so far don't help either.

 

[andrebandre]

With a flat bottom exposed button, its not going to stand without firing without locking it(well maybe the 14500 without anything to heavy on it, but not the bigger simplicity models). Unless one puts a super stiff spring in, which I don't personally like.

I've tried so far a Mini Gen Ti, Kaifun Mini and a 16mm OD Titanide/Diver tank.
I think the only heavier atty was the KM in tank mode. In driper mode is not at all heavy.
I didn't much care about it's ability or lack of it to withstand heavier attys at ease, it was the too soft action that prompted me to try to increase it's resistance.
Anyway i got the spring where i like it, and if the mailman doesn't screw me over as is his custom, today i should be receiving the much desired Doc Dave Mini micro which i hope will be the nicest match from what i tried so far for the Simply.

 

[txredxj]

Man, i am green with envy at the quality of the pics you posted.
I have tried to install tapatalk on my phone without success, opened an account on Flickr just be able to drag by the hair some decent pics in here, with similar results, it will be the death of me if i can't find a way to upload some better pics than the resident system allows.

lol they are pics from my iphone. emailed from phone fullsize to my email. downloaded to computer from email then uploaded to photobucket. copy image link from photobucket to post. image goes to 4 different spots till i post it up. im sure there is an easier way to do it but i just stick to the basics.

 

[wongster360]

I just picked up a 2nd Simplicity off the classifieds complete with a GP Spheroid. This is my favorite device/RBA by far. No leaking whatsoever.

Txredxj photobucket has an iPhone app and you can accomplish the same results with Tapatalk right from your phone.

 

[raqball]

I just sold mine... BOO!

Love it but can't really get into the smaller battery mods for some reason..

I have not even mailed it yet and I am already wondering if I should have kept it..

BTW, nice photo!

 

[Freckle]

With a flat bottom exposed button, its not going to stand without firing without locking it(well maybe the 14500 without anything to heavy on it, but not the bigger simplicity models). Unless one puts a super stiff spring in, which I don't personally like.

DOES THIS MEAN SOON?????????


LOL sorry for the caps, I am excited!!! 26650, I beg of you, please before october, that is all I ask!!

 

[txredxj]

i might try that out. i am in the process of stalking domovaporco for the Spheroid lol

 

[andrebandre]

And here is my latest addition of mini attys. I like it best so far.
Same sorry quality.
I opened an account on Photobucket thinking that there is some conflict of sorts with Flicker, but i get the same "invalid file" error so i i'll just live with whatever i can upload from my computer.

 

[andrebandre]

lol they are pics from my iphone. emailed from phone fullsize to my email. downloaded to computer from email then uploaded to photobucket. copy image link from photobucket to post. image goes to 4 different spots till i post it up. im sure there is an easier way to do it but i just stick to the basics.

How exactly do you copy the image link to post.
I mean where do you paste it?
Probably that's what i'm doing wrong. Trying to use the option to upload from website.
Maybe someday i'll figure out how to do it.

 

[wongster360]

i might try that out. i am in the process of stalking domovaporco for the Spheroid lol

Me too! I want another. They're about 30 minutes away for me so I may have to drive down there (they don't have a store front yet though) when the become available.

 

[wongster360]

How exactly do you copy the image link to post.
I mean where do you paste it?
Probably that's what i'm doing wrong. Trying to use the option to upload from website.
Maybe someday i'll figure out how to do it.

Yea just paste the link to your image into the body of your message here and put [img ] before the link and [/img ] after (without the extra spaces I put in there

 

[Nach]

Is that a Micro B?

I have a Mini B due to arrive today. Looks great on Simplicity!

And here is my latest addition of mini attys. I like it best so far.
Same sorry quality.
I opened an account on Photobucket thinking that there is some conflict of sorts with Flicker, but i get the same "invalid file" error so i i'll just live with whatever i can upload from my computer.

 

[Freckle]

Okay, stalking as well. I always wanted to try the spheroid, so let the stalking begin!