Already have Kayfun v4, worth getting KFL+ V2?

[Raguvian]

I already have two kayfun V4s. However, it blows through juice and is pretty finicky to use since it's so complex. I keep hearing about how great EHPro's KFL+ V2 is, so I was wondering is it worth picking up one of those if I already have the V4?

How do they compare flavor wise? I realize the KFL will be harder to refill, but if the flavor is comparable and doesn't eat my juice I will get one.

Thanks!

 

[doctorwho1138]

I have both and I like the 4 infinitely better. Flavor wise they are about the same. But I just think it's just that the kayfun 4 has just so much more airflow that causes it to burn so much juice. Mine goes through about 1 1/2 times the juice of my kayfun 3.1 and lite v2. I think the kayfun 4 also wicks better due to the 4 juice holes instead of channels. On the two previous kayfuns I would get the occasional dry hit if I was chain Vaping and on the 4, I can chain vape no problem. I also think the 4 is the easier one to build on. It just seems to work with every build I do. I have the Eh pro lite v2 if you want to swap or something. I doubt I will ever use it again. Hope this helps


Sent from my iPhone using Tapatalk

 

[roxynoodle]

I personally think the previous kayfuns give about the same vape, and are much easier to live with Yes, less juice and less parts. The 2 airhole EHPro has a decent draw.

My k4 was a gift so I will continue using it . I'm working out some issues with it, but I think I'll have it working perfectly this week. Whether I buy a second one will depend largely on how much I like it once its functioning perfectly.

 

[Raguvian]

Thanks for the replies. I will continue to think about it. Coming from RDAs, theres something to be said about simplicity, especially while at work while I'm away from my tools. There are also a lot more parts to disassemble to clean the tank out which wouldn't be the case with the KFL+. I would have to carry a screwdriver for the fill and airflow screws, but that's not a big deal if I can get a simpler vape.

Speaking of airflow, how is it on the KFL+? I took the airflow screw out of the v4 and am thinking about getting the 4S kit for a bit more flow.

doctorwho1138, you wouldn't happen to have a black KFL+, would you?

 

[doctorwho1138]

Hey raguvian, no sorry it's just a plain ol stainless. You are correct though, it's more simple to clean but no by a whole lot. Even with the air wide open with the dual air draw, it's still a tighter draw than my kayfun 4 though. I haven't even messed with my airflow as it was perfect right out of the box. The one thing thing that I didn't like about my lite though was filling it. I could never manage to top fill it. You had to use the screw on the bottom. That's why I actually ended up using my 3.1 more as it was easier to top fill. I had to remove my air control screw all the way on the 3.1 to get it close to how I liked it though. My 3.1 was a hcigar if that matters.


Sent from my iPhone using Tapatalk

 

[bullet08]

have both... haven't built them yet. tfgt2 is my go to RTA right now.

 

[Mtek]

I have both, V4 draw is deft better. I have the ephro v2 plus, removed both bottom air holes, v4 still blows it away in flow. Some like a tighter draw, so this could be a non issue. The V4 does go through more juice, but I vape it more too. Kfl can't keep up while driving, and chain hitting it. I attribute a lot of the juice consumption to more use. Just my experiences with both, some prefer the flavor of the Kfl, but not I.

Edit: Kfl is more diff for me to get a consistent build, some days it was perfect, others I struggled with how it was vaping. V4 is more forgiving to changes and coils imo.

 

[ThunderDan]

The two airholes on the ehpro really don't help open the draw up that much to me vs my auth KFL+ with single air hole. It is still limited by the center pin.

I drilled out the center pin and single airhole to 5/64 on my tobeco KFL+, and it is more open than the ehpro one.

A drilled out center pin in the ehpro would probably be better than my tobeco, just haven't tried it out.

All 3 have less air flow than the stock kayfun 4 clone I have.

Sent from my Nexus 6 using Tapatalk

 

[sos2001]

I have a sentimental attachment to the EHPro KFL+ v2. It was my first RTA...and it never failed me. All my first builds were dead on...gave me the confidence to keep plugging along. Still use it a great deal even while the v4 has moved to the top of the rotation.

 

[Raguvian]

Thanks for the replies everyone! Sounds like the KFL might be a bit too restrictive for me, then. I just got my Tobeco K4 in the mail and it's amazing so I'm going to just keep it and be happy!