Anybody interested in showing off thier eGo setups?
- Thread starter the3orpdeenyse
- Start date
- th_trl_thread_readers 0
- Status
Yeah, Pbusardo is a popular guy. I always like how in the beginning of his videos that girl says "Can I taste your juice?!" LOL!!
LOL! Yeah, sure beats the 5-minute heavy metal intro that has become a standard in most reviews!
Holy crud biscuits...that must last forever lol, very nice! Where is your eGo???
Ron -
LOL! I think that little black thing on the side is the eGo!
If I'm right, n Rustica, what's the white unit that it's plugged into? I've been thinking about getting a PCC, but this looks like it could be a better solution to me.
Last edited:
I didn't see the eGo on the side at first either. But my guess is that Rook was joking. LOL
So, it's like a homemade eGo passthrough box mod?
So, it's like a homemade eGo passthrough box mod?
I like the Submarine Tank a lot. Besides looking really cool and different, it's been providing a nice clean and smooth vape. After a little trouble getting the top and bottom plugs in just right after each carto change, it stays in place nicely and everything stays bone dry, and with no maintenance required. Plus, I like the contrasting red o-rings in the black plugs.
The little screw goes in and out very easily for an easy refill and it's a very smooth, clean hole with no cracks or that shattered look around the hole. It's like they must drill the hole with a laser or something.
Thanks for asking.
I have both of these tanks and like them both but the M1A1 is my favorite. The tube is a stronger material, it does have spider webbing around the hole but I've been using it for 3 months without any leaking issues. Also you don't see them when the screw is in place. The caps give a nice polished look and makes changing cartos much easier than on the sub tank. The carto simply just slips through without displacing the plugs so there is no fiddle factor lining them (or displaced o-rings) back up like on the sub. I also prefer the placement of the screw closer to the top of the tank rather than in the middle. Lots of fun colors too!
I'm not bashing the sub as it is a good tank and works well. I would have to say though that it is not as solidly made. I'm not sure why but the tank slips up on the carto occasionally which causes leaking around the base if I'm not careful. It's really not a big deal but changing cartos can be annoying sometimes.
I also prefer the flavor on the M1A1 but that is probably due to the set up: IPro VV, M1A1 with 801 Ikenvape carto vs. KGO or EGO VV Twist with M&P Sub and 510 Boge carto. I am planning on getting some Ikenvape 510 cartos so I can compare the tanks but Ikenvape has been closed for quite a while. Hopefully they are opening again soon.
Jump my
YMMV
Thanks Mookie!!! All good points. I think I'm probably just going to have to buy both!
Love your signature, btw!
Love your signature, btw!
yeah, the 18650 usb charger box costs about $20 less than a pcc, but it took more than a month for it to get delivered from hong kong. i got the white 18650 protected trustfires off dx before i knew about advantages of imr high drain, so googling around manically one night, i found the the USB 10 in 1Mobile Phone Power Supply Charger 18650 Battery Charger now i have a permanent home for the trustfires. i can recharge them without removing them from the device.
simply plug in the mini usb to charge the batteries.
i went ahead and ordered another cheaper model from the same company and i'm still bugging the company to send it to me. i think it might've been lost in the mail. i'm hoping to find a double or quadruple 18650 battery box with enough spare room to build a high mah variable wattage/dna-chipped pv.
Last edited:
Those M1A1's do look pretty bada**. It's definitely a major plus if the top and bottom caps actually screw on to stay in place while changing cartos.
On a side note, I don't get the touting of anything ecig related being indestructible. Although, I do like that about the SilverBullet, since it costs like $200 (It's made out of titanium or something), but honestly, I doubt I'll ever have to worry about someone running over my pv with their truck or a carpenter mistaking my pv tank for a roofing nail and banging the heck out of it. I keep my pvs on my desk or in my jacket pocket usually.
My biggest concern is a leaky tank. So far so good with the Submarine.. and it seems like the M1A1 has that covered as well.
On a side note, I don't get the touting of anything ecig related being indestructible. Although, I do like that about the SilverBullet, since it costs like $200 (It's made out of titanium or something), but honestly, I doubt I'll ever have to worry about someone running over my pv with their truck or a carpenter mistaking my pv tank for a roofing nail and banging the heck out of it. I keep my pvs on my desk or in my jacket pocket usually.
My biggest concern is a leaky tank. So far so good with the Submarine.. and it seems like the M1A1 has that covered as well.
Sorry about that, everyone! I'm not exactly an eGo maniac, but I do like my tanks..
Ah, that is awesome!!! Thanks a lot, N rustica! I think you did just save me the $20 extra I would have spent on a PCC!
The caps don't actually "screw on". I'm not technical so bare with me as I try to explain. You know how the sub has a rubber plug, then a red one, then another black one. The M1A1 has a metal cap first that narrows slightly and it extends into the tank. There is a black rubber plug (or o-ring?) around the metal part that is inside the tank that firmly holds the cap in place and forms the seal. It looks like I could pry the cap off but I wouldn't want to try to and mess it up. Plus at this point there is no need to. That is also why changing the carto is easier - everything stays in place and you just slip a carto in or out. I just didn't want to mislead you into thinking that the cap screws on and off. I do believe they sell replacement parts though if you needed to replace anything.
As for being indestructible.....I'm not going to test the theory but it does feel pretty solid.
@dragonbone - so sorry, we will now return to our regularly scheduled program!
Ego w/ a Smoktech Tank that connects to the battery like a Vision Stardust:
And on the EGO Twist:
And on the EGO Twist:
EGO Mod Tube with Carbon Fiber wrap and Phiniac Textured Tank
View attachment 104175
View attachment 104175
Okay - how did you get your twist to look like that? It looks great!
Thanks! I found some self-adhesive black & gold address labels and wrapped the Twist in the Zeros..
- Status
Similar threads
- Locked
