Anyone try the Aspire clearos/tanks yet?

[jjcordone]

Another vote for these from me. I've moved to nothing but these since I found them.
The only type I haven't tried yet is the Divide.
All of them have been fantastic and it appears to me the differences are in style alone.
My personal favorite is the glass mini vivi nova I got from Elite Vaporworks.
The vivi nova style looks dated in today's vapor world, but the performance is great and they are really durable.
Kind of like putting a new, big engine in an old car

 

[Kyi]

Are the Aspire ET's different than their other BDC clearos? They kinda look like the Kanger T3s.

I've been vaping on my Aspire since I lost my iClear 16, but it seems like the iClear still has better TH for me. This will do for now though.

 

[cvedrick]

Got my Aspire Mega in last night, cleaned it, dried it, put it together, filled it with juice and screwed it on my V3.

Pushed the fire button and....... Nothing!

Pulled it off of my V3 and sure enough the contact was recessed.....

Installed an EGO adapter, worked fine.....

Unscrewed the base, removed the coil unit and gently pulled the contact out, then re-installed but did not push hard.

Re-assembled an now everything works and has been doing well for 1/2 tank of vaping with no additional parts or tools other than my fingernails.

Hopefully this might help someone else who might be having the same problems.

Good vaping and Merry Christmas!

 

[eda123]

very common with the aspire heads- another reason i found them to be a slight hassle. Always had to have a pin on me to pull the contact out (i dont have fingernails).

 

[SethGrimm]

Am I the only one who hates my aspire?

I'm willing to hear ANY advice because I really want to love it. I think the Protank 2 looks goofy, it doesn't perfectly fit my drip tips, and I want a warm vape but I hate not being able to change juice all the time with cartomizers so I was so excited to hear about the aspire. I bought a full size glass vivi nova style aspire and it came with one head and I've tried everything but this head does NOT want to wick, Bobas Bounty did not work at all and now even my thin Alice in Vapeland juices are still dry hit central. I tried hitting it without firing it over and over and once I flood it it hits good ONE time and then it's back to being dry.

 

[pizza2me]

Got my Aspire Mega in last night, cleaned it, dried it, put it together, filled it with juice and screwed it on my V3.

Pushed the fire button and....... Nothing!

Pulled it off of my V3 and sure enough the contact was recessed.....

Installed an EGO adapter, worked fine.....

Unscrewed the base, removed the coil unit and gently pulled the contact out, then re-installed but did not push hard.

Re-assembled an now everything works and has been doing well for 1/2 tank of vaping with no additional parts or tools other than my fingernails.

Hopefully this might help someone else who might be having the same problems.

Good Vaping and Merry Christmas!

very common with the aspire heads- another reason i found them to be a slight hassle. Always had to have a pin on me to pull the contact out (i dont have fingernails).

I just did this with a couple of my wife's and no more fiddling!!!

Take the head out of the base and sand down the 510 at the threads about a mm or so. I just spin it on sandpaper. Or you could use a file or something. Very easy

Now all her head pins stick out just slightly as they should

 

[Joie]

I just did this with a couple of my wife's and no more fiddling!!!

Take the head out of the base and sand down the 510 at the threads about a mm or so. I just spin it on sandpaper. Or you could use a file or something. Very easy

Now all her head pins stick out just slightly as they should

where exactly are you sanding it down ???
I get sooooo mad at mine when not making contact.

 

[pizza2me]

At the tip of the 510 threading. Just make the threading shorter so the post from the head sticks out slightly. Sand without the head in it. And clean thoroughly before putting it back together

 

[pizza2me]

Say... You folks that soak the aspire heads in water, vodka or PGA. Do you just throw the whole head in there or do you take pin out before soaking?

 

[Nailz]

Say... You folks that soak the aspire heads in water, vodka or PGA. Do you just throw the whole head in there or do you take pin out before soaking?

I've been throwing the whole head in vodka for 24 hours, then just sit it on paper towel to dry till I need it.

 

[pizza2me]

Thanks nailz! That's what I'll try. I have about 6 of them that went south on me. What is your recovery rate? Or are you one that soaks them before they go bad?

 

[Nailz]

I normally clean them, when taste goes muted (not burnt) so high recovery rate, but don't last as long as a new coil though, once goes again, I just normally throw them, don't push a 3rd time with them myself.

 

[TorrieB]

I bought an Aspire last night and so far....I'm impressed for the most part. The flavor, the vapor production...so good. My only issue is the way this tank drinks juice but I realize that comes along with having dual coils. But I love it. The B&M store I bought this from called this tank "a market change" from me using my ProTanks and iClear 30 and I totally agree. I am absolutely loving it. I'm vaping Uncle Junk's Belgianberry right now but I think I'll save this tank for my cheaper juices. It makes me sad that my juice is gone so very fast. Or maybe I'll just get over it because the flavor is so amazing. Who knows....but I love my Aspire

 

[Joie]

At the tip of the 510 threading. Just make the threading shorter so the post from the head sticks out slightly. Sand without the head in it. And clean thoroughly before putting it back together

ok that sounds good....thanks

 

[pizza2me]

I've been throwing the whole head in vodka for 24 hours, then just sit it on paper towel to dry till I need it.

24 hours is about up. How many boil after the soak?

 

[Miss Chris]

I picked up an Aspire Davide glass tank from Ebay, started using it a few days ago. I think I love it. The flavor of my juice is outstanding. I won't stop using all the Kanger stuff I have but I'm very happy with Aspire and think others will like it also. It vapes warmer than my Kanger clearos. Hope the heads last a long time.

 

[OldSeer]

For those of you who are having Aspire Contact Pin ...problems...

if you'd use a little sewing thread on that bottom pin of the head...
like I show in my BLOG...
you'd have all you DUAL COIL ASPIREs making contact
and a lot of other clearomizers that haven't in the past.
See:
http://www.e-cigarette-forum.com/fo...thread-contact-clearomizer-mod-batteries.html

 

[dpdp]

Very disappointed with Aspire BDC - only 4 of 10 coils were good, another 6 have chemical rubber taste after few puffs. The original head was best, it lasted about 2 weeks and it performed great. The other 3 lasted about 2 days. I used the same 80% PG juice all the time.

I noticed that all heads, including the original (the best one) have the same serial number engraved. What about you?

 

[salemgold]

If anyone here has an Original Davide or any PT2s and are enjoying the Aspire BDCs as much as I am, DV has an adapter that will allow you to use the Aspire BDCs with both

Davide BCC/ProTank II Adapter for Aspire Coils

 

[Sambuca]

If anyone here has an Original Davide or any PT2s and are enjoying the Aspire BDCs as much as I am, DV has an adapter that will allow you to use the Aspire BDCs with both

Davide BCC/ProTank II Adapter for Aspire Coils

very cool. has anyone seen it work in a ptank2?