I've used the Diver in a XL OCD tank by using a long column drip tip. I would post a link to the "Type E" drip tip that I bought from RTD Vapor, but they don't seem to have them listed.
Atmistique Atomizers
- Thread starter billakosgr
- Start date
- th_trl_thread_readers 0
- Status
It will work in an XL tank but like Firestorm said you will need a longer drip tip and part of that longer drip tip will sit inside the tank..
I love my Diver 
2 x 0.2mm Kanthal with No-res wire
cotton wick
perfect for me
2 x 0.2mm Kanthal with No-res wire
cotton wick
perfect for me
Absolutely pleased with the performance of the Diver. Thinking of grabbing the Scuba for it, as I have another device on the way for the SnP.
Any idea of the dimensions on the Scuba?
Figured this was an appropriate place for asking
Any idea of the dimensions on the Scuba?
Figured this was an appropriate place for asking
Diver + Scuba Tank = Awesome Device! easy to fill, good capacity, and looks great!
I vape with this combination almost 6 months.
The only thing i change is the drip-tip and the batteries in my provari.
The only thing i change is the drip-tip and the batteries in my provari
.I use these for Divers in XL tanks:
510 Atomizer Tube Extender - Avid Vaper
with good results. I did trim them a little to be flush with the tank.
They also work as a choke, the benefits of which people are just finding out.
if you apply a choke to the vapor-stream it becomes concentrated, delivering thicker, generally more flavorful vapor overall.
this is the same principle that many tier-1 atomizer designers employ: GP with their spheroid, Svoe Moesto with their kayfuns, GG in their designs since the Odysseus, Leo in their Sophias.
Sorry if mentioning other designs by name and brand are bad form - if requested, i'll edit them out.
I don't even remember, probably 2 strands of 2mm or 3mm german silica trimmed the classic way at 1.2 ohm coil, or so. There isn't setup under the sun that i haven't tried.
The maximum leak free (not a spec) period i was able to achieve was about 4 days when i used the fat (hollow) so called 3mm ekowool (which i think is more like 5mm) rolled inside the tube a la tire bouchon. I had an amost as good result with 2 strands of XS 116 one trimmed in normal fashion the upper 2 ends spiraling intertwined the same bottle opener way and tucked. Same scenario, at some point they saturate and very slowly the dreaded Chinese Drop begins.
Everything fits snug to the point of breaking (cup/insulator/pin). Even the neg wire is routed opposite to the tube hole so that no juice might creep between the cup and insulator.
From 90/10 PG/VG to 100% VG, some with better results than other. I challenge anyone who claims he has a constant no leak setup.
Some old pics below at better resolution might give some idea of my most successful setups.
I tried many more wicking materials/styles , coils (nano/micro) in my several month long attempt to tame the beast.
The only no leak, no gurgle method i found and i guarantee to steadily give good results is lying your mod flat with the hole upward above the juice level, before and after use. It works.
- Status
Similar threads
- Locked
