Atmistique Atomizers

[rumthin]

I've been running a Diver in my 22mm SnP, and I have no leaking. I use the "S" configuration with organic cotton inside the Diver. I might get a smidge of juice on the 510 connector if I leave my SnP and Diver sitting idle for a few days, but nothing serious. To prevent leaking when it's time to refill, I simply have to make sure the juice feeding hole on the Diver is outside of the tank.

I do see a little condensation build up between the o-rings after some use, but it's not the end of the world for me.

 

[Firestorm]

Will spare Diver stainless steel center poles be for sale?

 

[Konstantinos]

Hello to all

Diver V2 35.5mm use the same ready coils.

Spare ss ans brass center pins will be available

 

[buergermeester]

Hello to all

Diver V2 use the same ready coils.

Spare ss ans brass center pins will be available

Konstantinos, what means an option Enezlis for 35.5mm Tank? Thank you.

 

[Konstantinos]

It is exactly the same with the other tubes inside but with different shape outside

 

[Vapian]

When these go up, will it be up to the user to select the right combination of parts for their application? Or will there be some configurations the user can select from (in addition to being able to get individual parts)?

For example, if I'm buying for a Billet Box, do I have to know which bits to get, or will there be a "Billet Box" configuration available to purchase in one go?

 

[Firestorm]

When these go up, will it be up to the user to select the right combination of parts for their application? Or will there be some configurations the user can select from (in addition to being able to get individual parts)?

They are "up" now. You cannot put them in your cart or purchase them, but you can see what options are available and configurable. I imagine that you probably aren't going to get anything radically different (if at all) than what is there now in terms of UI or choices.

There's text at the bottom that specifically speaks to Billet Box users.

Indeed, it appears that Konstantinos has been listening!

 

[Vapian]

Nicely done, then!

Now it's all over except the waiting.

The waiting ... and the spending. Just that.

Well, the waiting, and the spending, and then the waiting again. . . .



"I hear the Mailman comin'...."

 

[Konstantinos]

If you see something in the upcoming video and in the details on the site, that not clear enough pls inform me

 

[V4Vendetta]

I run a flanged Diver V1 in my Billet Box without any issue. I have two diver and chose a tube that was slightly shorter and it works. I just have to work it a bit to get it out when needed (flip down the box and bring the tank out parallel) - maybe 1 minute longer than normal.

 

[Kataphraktos]

Interesting, the flange on the v2 seems much less pronounced than that of the v1. Even without getting the flangeless version, this should make it a bit more "universal".

I love the look of the Enezlis tube. It looks like a steam piston. Very apropos.

 

[qorax]

Interesting, the flange on the v2 seems much less pronounced than that of the v1. Even without getting the flangeless version, this should make it a bit more "universal".

I love the look of the Enezlis tube. It looks like a steam piston. Very apropos.

Which is the Enezlis tube?

 

[Konstantinos]

Kataphraktos i like a lot how it looks inside the tank

Stan as you look the pic here http://www.atmistique.gr/en/craven-...page_images.tpl&product_id=480&category_id=75, it is the first from the right. The only difference is that this tube has also an outside cone

Presentation: Diver V2

 

[raqball]

Love it!!!!!!!!!!!!!!

 

[Konstantinos]

Tomorrow the set-up, you will see its very easy

 

[Rise]

Will you post here before they go on sale I'm sold

Sent from my XT1058 using Tapatalk

 

[Konstantinos]

...as always

 

[qorax]

Kataphraktos i like a lot how it looks inside the tank

Stan as you look the pic here http://www.atmistique.gr/en/craven-...page_images.tpl&product_id=480&category_id=75, it is the first from the right. The only difference is that this tube has also an outside cone

Presentation: Diver V2

Sweet K! Just viewed it on Vapor Wall ~ Loved it!

1) So, is it named right by me, as under?


2) And all would come in both - 'flanged' or 'flangeless' ~ selectable as per our choice, right?

3) Furthermore, with the build section (ceramic) sitting that high ~ won't we have wicking problems when the tank is 'low'? I mean, when the juice level goes down below the wick slots we would need to top the tank up asap, right?

 

[Konstantinos]

1. Nice work Stan thanks a lot for your time . Its correct
2. Exactly, BilleBox users must go to flangless base
3. You will not have any problem because the holes are in the bottom of the tank and when liquid level is low it will still feed the atomizer while you make a move to vape. We test it many times and always without any feeding problem.

 

[jmarkus]

1. are the center pins from v1 compatible with v2?
2. will we be able to buy spare tubes (if we buy the standard 35mm diver v2, can we add on an xl tube, or an enezlis tube? looks like you said you can buy spare tubes!!!!!! awesome.

thank you K! so excited.