I can't answer, but I'll bump this questions because maybe Isaac missed it
I'd offer you one, but I out of those myself. I have the LR 510s though.
Last edited:
Atomizers 2.0 w/ Video!
- Thread starter Iken
- Start date
- th_trl_thread_readers 0
- Status
I can't answer, but I'll bump this questions because maybe Isaac missed it
I'd offer you one, but I out of those myself. I have the LR 510s though.
Thanks WWAY, I am good, I am just looking to pick up some dedicated flavor atty's I can wait...a little while.....maybe...lol
Where did you find them? I've been looking around for tact switches too. My local RadioShack and Fry's don't have anything that would work.
I came across these...
Mountain Switch Tactile & Jog Switches
These are the ones I got today from eBay. So will know in a few days if they are the right ones or not. We measured every part of the original and the guy says these are the same. We will see.
15 x Tact Switch 6*6mm 8mm 50mA Through Hole SPST-NO - eBay (item 220619960866 end time Jul-10-10 09:22:38 PDT)
These are the ones Isaac recommends
Tact Switch Vertical Shaft length: 3.5mm | BTS-1102B (BTS1102B) | Distributed By MCM
The only difference is the shaft length, the ones Isaac recommends are 3.5mm which is a tad shorter than the original. The ones I got today are 5mm which match the original.
It was confusing because one gives the shaft measurement and one gives the overall height, but a few emails cleared that up LOL
Edit... I'm using one of the ones Isaac recommends and it works great, I just don't like the shorter button. If you carry it in your pocket the shorter button has it's advantages though. Less chance of misfire.
15 x Tact Switch 6*6mm 8mm 50mA Through Hole SPST-NO - eBay (item 220619960866 end time Jul-10-10 09:22:38 PDT)
These are the ones Isaac recommends
Tact Switch Vertical Shaft length: 3.5mm | BTS-1102B (BTS1102B) | Distributed By MCM
The only difference is the shaft length, the ones Isaac recommends are 3.5mm which is a tad shorter than the original. The ones I got today are 5mm which match the original.
It was confusing because one gives the shaft measurement and one gives the overall height, but a few emails cleared that up LOL
Edit... I'm using one of the ones Isaac recommends and it works great, I just don't like the shorter button. If you carry it in your pocket the shorter button has it's advantages though. Less chance of misfire.
Last edited:
Nice find! I think the switch body is 3.5mm high on these kinds of switches. If so, I think that would make this button 1mm longer the the ones Isaac uses (3.5 + 4.5 makes 8).
Here's a diagram with dimensions... http://www.mouser.com/catalog/specsheets/MS-100599.pdf
They wanted $9 to ship a 0.20 part. I didn't like that really
Yup, I've been looking for one that is 0.5mm longer but didn't find anything.
Nice find! I think the switch body is 3.5mm high on these kinds of switches. If so, I think that would make this button 1mm longer the the ones Isaac uses (3.5 + 4.5 makes 8).
Here's a diagram with dimensions... http://www.mouser.com/catalog/specsheets/MS-100599.pdf
They wanted $9 to ship a 0.20 part. I didn't like that really
Yup, I've been looking for one that is 0.5mm longer but didn't find anything.
$9 to ship is why I said don't order any, I have extras
I ordered 10 to at least spread the shipping out.The guy on eBay has other sizes, he has a 7 and a 7.3 if the 8 is too long. And his shipping is free
$9 to ship is why I said don't order any, I have extras
The guy on eBay has other sizes, he has a 7 and a 7.3 if the 8 is too long. And his shipping is free
Wow... 7.3... that's probably about right for me... a smidgen longer than the ones Isaac has and a smidgen shorter the the originals.
30 x Tact Switch 6*6mm 7.3mm 50mA Through Hole SPST-NO - eBay (item 250578851096 end time Jul-11-10 04:18:15 PDT)
Yum... I haven't had this Blackberry Champagne flavor in a while. The LR901 is just great for this type of flavor.
Last edited:
Try this link then
15 x Tact Switch 6*6mm 7.3mm 50mA Through Hole SPST-NO - eBay (item 320546398978 end time Jul-10-10 09:17:30 PDT)
Blackberry Champagne sounds good!! Now I want a drink LOL
LOL Wow! Help a friend move out of house for a morning and miss all this!
They should be here in just about a week my good man. I really wish I had some too! or I would give you some! lol My little atty collection NEEDS labels! lol
Uh oh on the Switch! but I see your heading to take the little guy head on! If you Need anything, Anything at all please don't hesitate to get me good sir or any of us for that matter! lol I do have an incomplete button here, so if you lose any pieces, we may have you covered my friend. Remember, in between the brass half moon rings, there is a very thin plastic insert. Another side note: The new Chameleon, is aimed to have interchangeable parts and those parts will be up on the site with their individual listings such as reservoir cone, mechanical switch, etc.
Thanks Wway! We'll give these a shot too! I was going to say, the Chameleons' manufacture actually sands down the original buttons they use. Lately, I have been offering both types for button replacements. When I take one on a road test, the button accidentally gets pushed in all the time! Real Road test!
Mmm thirsty for liquids! I ordered 90ml of gourmet liquid, and burned 3 atoms! I'm on day 2! Very upsetting
Hey Swipp! I was meaning to call you today buddy.
They should be here in just about a week my good man. I really wish I had some too! or I would give you some! lol My little atty collection NEEDS labels! lolYou can say that again Switch, 3 months I can see, 6 of solid use, I just don't know man. Now if we used nuclear technology.....Hmmm, but joking aside, you do have a valid point though. I was just watching a few videos on some pretty wild modding to components and as it appears wild, I may be just staring from an old fashioned perspective and honestly, when I First heard that there were people "Tail-piping" Which means to use no cartridge or plastic tip insert on their atomizers, my immediate thought was "They're nuts!" Sure some people get hurt along the way of these pretty radical idea's, but in a way we're all pioneers of this industry. It's alot like life, ya know. Adjustments and acceptance.
Just beautiful Vm! I really really Want to try this! Especially for the 10-12 hour ride we're going to have to endure! How long would you say they can run w/out needing a refill/top-off?
Uh oh on the Switch! but I see your heading to take the little guy head on! If you Need anything, Anything at all please don't hesitate to get me good sir or any of us for that matter! lol I do have an incomplete button here, so if you lose any pieces, we may have you covered my friend. Remember, in between the brass half moon rings, there is a very thin plastic insert. Another side note: The new Chameleon, is aimed to have interchangeable parts and those parts will be up on the site with their individual listings such as reservoir cone, mechanical switch, etc.
Thanks Wway! We'll give these a shot too! I was going to say, the Chameleons' manufacture actually sands down the original buttons they use. Lately, I have been offering both types for button replacements. When I take one on a road test, the button accidentally gets pushed in all the time! Real Road test!
Mmm thirsty for liquids! I ordered 90ml of gourmet liquid, and burned 3 atoms! I'm on day 2! Very upsetting
... that didn't fall through the cracks, Switcher snagged that one
WTG my good man, WTG... that didn't fall through the cracks, Switcher snagged that one
He sure did!!!! You should hear the things that come out Switcher's mouth! I'm tellin ya it's all gold!
LOL Thanks buddy!LOL All I heard was "NEW CHAMELEON" and I perked up! Not that there's anything wrong with my present Chameleon Me, it, a 510 carto and some chocolate menthol I mixed up are quite attached today!
Ok it's Monday and I can't come play any more today too much work 
Gotta get money to pay for all my PV stuff ya know
Happy Monday Vaping!
Me, it, a 510 carto and some chocolate menthol I mixed up are quite attached today!Ok it's Monday and I can't come play any more today too much work
Gotta get money to pay for all my PV stuff ya know Happy Monday Vaping!
... and folks thought you were just a pretty faceHe sure did!!!! You should hear the things that come out Switcher's mouth! I'm tellin ya it's all gold!
Gee Granma you got mighty big ears LOL.back at ya
thanks 
As I was reading this, I could just imagine Switched sitting down with the biggest grin on his face
! That's awesome, Isaac! A reservoir cone? Nice!!! We should call it "Camelego", haha
What's the eta?
I sure hope it is not that ugly thing that Imeo is putting outAs I was reading this, I could just imagine Switched sitting down with the biggest grin on his face
That's awesome, Isaac! A reservoir cone? Nice!!! We should call it "Camelego", haha
What's the eta?
You know me well too well Vap.
I sure hope it is not that ugly thing that Imeo is putting out
You know me well too well Vap.
LOL! With Isaac's track record I can't imagine something ugly leaving the factory. If executed properly, I like the idea since I'm not a fan of brass adapters.
Why is that my man?LOL! With Isaac's track record I can't imagine something ugly leaving the factory. If executed properly, I like the idea since I'm not a fan of brass adapters.
I'm just not big on two-tone, it's just not my style. I obviously wouldn't refuse buying something that's two-toned since I currently do own a Chameleon with brass adapters, but if I had it my way, adapters would either match the body of Chameleon or the color of atomizers. I guess that's just one more thing I like about 801 atties that they go over the adapter and almost cover it completely. But again, that's just a matter of personal preference.
EDIT: I do like two-tone look with colors in the same family, like light grey with dark grey or chrome with titanium just not gold/silver combo so much
Last edited:
- Status
