Attack of the clone SXK Steamtunners Tankit
- Thread starter rifky
- Start date
- th_trl_thread_readers 0
- Status
Looks like singe coil open draw DTL to me.
Alibaba Manufacturer Directory - Suppliers, Manufacturers, Exporters & Importers
Alibaba Manufacturer Directory - Suppliers, Manufacturers, Exporters & Importers
Steamtuners ultem kit Looks nice for the ST but 45usd , you could still get full authentic by buying steam s
Tuners,
plus using SXK billet box insider deck parts an complete it your self might cost 60usd better than 100$+ though
The SXK ST has the deck already , i bought to try out, will be hopefully arriving this wk so can give a feedback when it arrives after some use,
Be nice if sxk make the other extra parts too.
Sent from my ONEPLUS A3003 using Tapatalk
Tuners,
plus using SXK billet box insider deck parts an complete it your self might cost 60usd better than 100$+ though
The SXK ST has the deck already , i bought to try out, will be hopefully arriving this wk so can give a feedback when it arrives after some use,
Be nice if sxk make the other extra parts too.
Sent from my ONEPLUS A3003 using Tapatalk
Last edited:
There is no gap. There just appears to be one because of how the insider fits into the base of the tankit. Personally I love the vape on the tankit. Slightly restricted when wide open. Very nice flavor oriented single coil rta. I am waiting on a clone of the clear tank top but other than that I've been very happy with it.
ST steam tuners , RTA , spaced 3mm ID SS build,
It can get a little toasty being so compact , bit ....... lovely Flavours ,
Geeky vapes has a wick tutorial for the BB insider deck (Billet Box) which is the exact deck , tiny chamber compact ,
Nice variations on Airflow ,
Can be shut down not full on restricted but near an not to open but nice.
JFC open, via Chamber, deck feed channels
Built for Flavours being small compact like i say can get toasty when chain vaping
Good size for building , not hard to build on use small wick tails i do have some going down the channels
Threw in my Banana Cream mix which i make , absolutely great on 3rd tank no leaks , no dry hits
Combo of short Atomiser , short wicks , no chimney just Chamber and drip tip almost
I do believe help enhance those Flavours,
Geeky vapes insider build
Sent from my ONEPLUS A3003 using Tapatalk
Refilling , simple enough top fill 2 large kidney shaped holes
Top cap flat with Oring to seal ,
Last edited:
Wide open its just shines
An provides a excellent Flavourful vape.
Not as hot as when its shut down, open fully still has a restriction to it.
Im Now on my 5th refill tank,
This time with
Smurf Berries mixed with some Cereal yogurt ,
milks/ creams yogurts /,Sweet Strawberries + Blueberries ,
Left Airflow ect open during filling this time no leaks, maybe I had a little more wick than needed.
Obviously will need to try other builds in here over some time
but first impressions
Is Im liking it just excellent performance from such a little RTA
On par with my Hussar RDTA single coil also for Flavours
The Airflow on the ST
is also an indirect flow, it comes in through the side airflow slots.
where you can visually see 4 dots through the slot to indicate how open or shut your Airflow settings are.
It then travels its way Slightly further along the airflow ring
to the side of the
decks 4 inlet holes on either side of the base.
which in turn feeds
the bottom Single central fed airflow system.
With dual Airflow on either side of the base to one medium sized deck kidney/ Or bean shaped decks
bottom fed Airflow situated Directly under your coil build, provides excellent Flavours, this is no different.
Its substantial enough to give a good saturated moist draw.
With a nice restrictiveness that helps enhance its Flavours
I do like this RTA and can see now.
Why many rave about the insider build deck adapter for the Billet box.
Since this is part of that system and deck.
Providing this nice Flavourful draw,
might even consider a Billet box at some point although it just looks too much faffing about though,
The ST RTA is definitely worthwhile if you like your single coil builds or on the fence about it.
it can be shut down some what but in doing so makes a hotter vape, unless controlled via TC,
for the price of the Clones its definitely worth picking one up,
Trying for your self
Steam Tuners own RTA. Might even give the Hussar a run on best Flavours
Sent from my ONEPLUS A3003 using Tapatalk
An provides a excellent Flavourful vape.
Not as hot as when its shut down, open fully still has a restriction to it.
Im Now on my 5th refill tank,
This time with
Smurf Berries mixed with some Cereal yogurt ,
milks/ creams yogurts /,Sweet Strawberries + Blueberries ,
Left Airflow ect open during filling this time no leaks, maybe I had a little more wick than needed.
Obviously will need to try other builds in here over some time
but first impressions
Is Im liking it just excellent performance from such a little RTA
On par with my Hussar RDTA single coil also for Flavours
The Airflow on the ST
is also an indirect flow, it comes in through the side airflow slots.
where you can visually see 4 dots through the slot to indicate how open or shut your Airflow settings are.
It then travels its way Slightly further along the airflow ring
to the side of the
decks 4 inlet holes on either side of the base.
which in turn feeds
the bottom Single central fed airflow system.
With dual Airflow on either side of the base to one medium sized deck kidney/ Or bean shaped decks
bottom fed Airflow situated Directly under your coil build, provides excellent Flavours, this is no different.
Its substantial enough to give a good saturated moist draw.
With a nice restrictiveness that helps enhance its Flavours
I do like this RTA and can see now.
Why many rave about the insider build deck adapter for the Billet box.
Since this is part of that system and deck.
Providing this nice Flavourful draw,
might even consider a Billet box at some point although it just looks too much faffing about though,
The ST RTA is definitely worthwhile if you like your single coil builds or on the fence about it.
it can be shut down some what but in doing so makes a hotter vape, unless controlled via TC,
for the price of the Clones its definitely worth picking one up,
Trying for your self
Steam Tuners own RTA. Might even give the Hussar a run on best Flavours
Sent from my ONEPLUS A3003 using Tapatalk
Very nice review bro, one last question. I see on pic there is slightly base o ring (between insider and base) it seem the juice channel is kinda to big so we can see the o ring bellow the wicking juice channel. Is that any liquid fall inside the base? Thx
The blk oring is the top of the glass tank section
Has a ss tank then a pc tank which has threads top an bottom both have orings the pc tank is still on in my pics
Sent from my ONEPLUS A3003 using Tapatalk
ST steam tuners , RTA , spaced 3mm ID SS build,
It can get a little toasty being so compact , bit ....... lovely Flavours ,
Geeky vapes has a wick tutorial for the BB insider deck (Billet Box) which is the exact deck , tiny chamber compact ,
Nice variations on Airflow ,
Can be shut down not full on restricted but near an not to open but nice.
JFC open, via Chamber, deck feed channels
Built for Flavours being small compact like i say can get toasty when chain vaping
Good size for building , not hard to build on use small wick tails i do have some going down the channels
Threw in my Banana Cream mix which i make , absolutely great on 3rd tank no leaks , no dry hits
Combo of short Atomiser , short wicks , no chimney just Chamber and drip tip almost
I do believe help enhance those Flavours,
Geeky vapes insider build
Sent from my ONEPLUS A3003 using Tapatalk
Refilling , simple enough top fill 2 large kidney shaped holes
Top cap flat with Oring to seal ,
Thanks for the vids & all your pics!
Also got the Cloudone V3 RTA arrived together,
I did mention twist the driptip to raise chamber for jfc , on the ST RTA ( which it has not got)
As built the ST an the Cloudone at same time ,
The Cloudone has JFC not the ST ,
both do have a screw down Chamber, with both having juice channels coming up through the treads leading to the deck, ST has one large one either side of Deck,
Cloudone has 3 small channels on either side of deck.
Cloudone comes with 2 PC tanks 1 x clear PC tank.
1x frosted PC tank.
Only Cloudone has the Twist JFC via drip tip.
not the ST
1st 4 pics Cloudone V3 Top fill 2 little Oringed fill holes.
The Last picture is the ST with a Taifun GTv2 Driptip.
Which seems to suit it quite well,
ST RTA deck space can fit a Slightly larger build, @ 3mm id
Has better restrictive airflow option.
Also Looks really nice to me.
Cloudone V3 is around 2mm id max coil size, to fit between the posts.
I could fit 2.5mm raised Slightly above the post screws but then raises the coil,
It has twist chamber JFC,
None jfc on ST,
I think i said it had but got confused with building both at same time, so just updated this,
Sent from my ONEPLUS A3003 using Tapatalk
I did mention twist the driptip to raise chamber for jfc , on the ST RTA ( which it has not got)
As built the ST an the Cloudone at same time ,
The Cloudone has JFC not the ST ,
both do have a screw down Chamber, with both having juice channels coming up through the treads leading to the deck, ST has one large one either side of Deck,
Cloudone has 3 small channels on either side of deck.
Cloudone comes with 2 PC tanks 1 x clear PC tank.
1x frosted PC tank.
Only Cloudone has the Twist JFC via drip tip.
not the ST
1st 4 pics Cloudone V3 Top fill 2 little Oringed fill holes.
The Last picture is the ST with a Taifun GTv2 Driptip.
Which seems to suit it quite well,
ST RTA deck space can fit a Slightly larger build, @ 3mm id
Has better restrictive airflow option.
Also Looks really nice to me.
Cloudone V3 is around 2mm id max coil size, to fit between the posts.
I could fit 2.5mm raised Slightly above the post screws but then raises the coil,
It has twist chamber JFC,
None jfc on ST,
I think i said it had but got confused with building both at same time, so just updated this,
Sent from my ONEPLUS A3003 using Tapatalk
ST still going strong in need of a new Rewicking , but my Cloudone V3 RTA is still producing some fantastic Flavours im pretty happy with both Cloudone has really Suprised me though so much better than my Doggy style , easy refilling / top fill , easy to shut down and open up for an after refilling , and just works flawlessly without any leaks its one under rated unmentioned RTA ,
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
I love this tank. It really is fast becoming my favourite. Flavour is incredible. You need to build with the "insider" separate then once you have juiced up and screwed the chamber on, attach the base to your mod and then screw the deck on. Otherwise i find it plays with the connection. Thats the only negative i can find.
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
I think the biggest problem would be leaks even if it was the correct height. If the deck isnt the same width it would leak everywhere.
Sent from my SM-G930F using Tapatalk
- Status
