Is it possible that it was vapor escaping from your tank and not smoke just wondering
Sent from my SM-N900T using Tapatalk
Attack of the Hana Modz Clone. Let's wait together!
- Thread starter Fathomrock
- Start date
- th_trl_thread_readers 0
- Status
Is it possible that it was vapor escaping from your tank and not smoke just wondering
Sent from my SM-N900T using Tapatalk
That is Paint in the last picture of the clone as yes there is ripples... Hummmm I see some saying yes and some saying no so they could be from different manufactures?
Anodizing can result orange peel or ripple effects. Depends how it is done.
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
If the metal was not super clean you can have ripples and orange peel and splotchy anodizing
Sent from my SM-N900T using Tapatalk
Sent from my SM-N900T using Tapatalk
Lets see if anyone else can confirm if it is anodized from Wetvapes. Please let us know.
When you get a chance can you tell if yours is anodized? You got it from Wet, right?
well received my wrap for the banana clone, now just need something to wrap it around. lol.
If you zoom in on some of the photos its definitely pixels on some of these pics
I can confirm the orange Peel effect on the back plate. Ordered mine from 101vape.
Thanks for posting. I was kinda wondering since these are all coming from clouper allegedly.
I am not a paint expert so I am not sure. It does seem to have ripples. I can see my reflection, but very faint. Not close to a mirror finish.
Sent from my SCH-I545 using Tapatalk
I have a Clouper clone
Can't duplicate the two click unlock, locked device. But mine does unlock with four clicks.
LED Charging light (no light port) - While charging I took the cover off and there is a fairly bright red light while charging but it stayed red and gradually dimmed to a very dim red when charged - never turned green.
The clone measures at 25.9 x 47.2 x 89.5mm, the atomizer indent on the top is right at 23mm. Weighs in at 124 grams, 4 3/8 ounces without a battery. Sony VTC4 and 5 batteries both fit tight.
Russian 91% v2 with floating pin, Kayfun Light Plus v2, Nautilus and each of my six RDA all work without issue. I've had issues with more than one not working on a few mods.
I'm guessing the finish is anodized with a sealer on it, the finish nearly matches a Manhattan mech mod, except the clone is a finger print magnet.
I checked a couple of RDAs on a Fluke Multi-Meter for two builds, one at .78 and the other at .59 ohms.
The .78 ohm at 23.0 watts build read .7 ohms and 4.3 volts on the Evolve DNA 30 device and .7 ohms and 4.0v on the clone
The clone could be from 22.2 - 23.0 watts at 4.0v before the ohm reading would quite flashing - it was not consistent from vape to vape
The Evolve DNA 30 could go down to 15.6 watts and 3.6 volts before the flashing ohms but also had some variability that I could not lock down - sometimes as low as 15.2 watts and 3.5 volts
The RDA at .59 ohm read .6 ohm and 3.7v on Evolve DNA 30 and .5 (flashing) and 3.4v on the clone at 21 watts. I had to set the clone to 29.5 watts before the ohm reading quit flashing. Both had some variability as well but I did not play enough to lock down numbers - more interested in just vaping
Can't duplicate the two click unlock, locked device. But mine does unlock with four clicks.
LED Charging light (no light port) - While charging I took the cover off and there is a fairly bright red light while charging but it stayed red and gradually dimmed to a very dim red when charged - never turned green.
The clone measures at 25.9 x 47.2 x 89.5mm, the atomizer indent on the top is right at 23mm. Weighs in at 124 grams, 4 3/8 ounces without a battery. Sony VTC4 and 5 batteries both fit tight.
Russian 91% v2 with floating pin, Kayfun Light Plus v2, Nautilus and each of my six RDA all work without issue. I've had issues with more than one not working on a few mods.
I'm guessing the finish is anodized with a sealer on it, the finish nearly matches a Manhattan mech mod, except the clone is a finger print magnet.
I checked a couple of RDAs on a Fluke Multi-Meter for two builds, one at .78 and the other at .59 ohms.
The .78 ohm at 23.0 watts build read .7 ohms and 4.3 volts on the Evolve DNA 30 device and .7 ohms and 4.0v on the clone
The clone could be from 22.2 - 23.0 watts at 4.0v before the ohm reading would quite flashing - it was not consistent from vape to vape
The Evolve DNA 30 could go down to 15.6 watts and 3.6 volts before the flashing ohms but also had some variability that I could not lock down - sometimes as low as 15.2 watts and 3.5 volts
The RDA at .59 ohm read .6 ohm and 3.7v on Evolve DNA 30 and .5 (flashing) and 3.4v on the clone at 21 watts. I had to set the clone to 29.5 watts before the ohm reading quit flashing. Both had some variability as well but I did not play enough to lock down numbers - more interested in just vaping
Last edited:
Ano can have texture. It can even look blotchy but it wont have runs, over spray and all the tell tale signs of paint.
If this helps Any
Mine looks just like it. Idk if that is anodized or painted. Ocelot can you confirm?
Sent from my SCH-I545 using Tapatalk
- Status
